summaryrefslogtreecommitdiff
path: root/board/zylonite
diff options
context:
space:
mode:
Diffstat (limited to 'board/zylonite')
-rw-r--r--board/zylonite/lowlevel_init.S386
1 files changed, 191 insertions, 195 deletions
diff --git a/board/zylonite/lowlevel_init.S b/board/zylonite/lowlevel_init.S
index 4d62be5d5e2..c3bb4eb67f1 100644
--- a/board/zylonite/lowlevel_init.S
+++ b/board/zylonite/lowlevel_init.S
@@ -16,7 +16,7 @@
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
@@ -32,140 +32,140 @@
DRAM_SIZE: .long CFG_DRAM_SIZE
/* wait for coprocessor write complete */
- .macro CPWAIT reg
- mrc p15,0,\reg,c2,c0,0
- mov \reg,\reg
- sub pc,pc,#4
- .endm
+.macro CPWAIT reg
+ mrc p15,0,\reg,c2,c0,0
+ mov \reg,\reg
+ sub pc,pc,#4
+.endm
.macro wait time
- ldr r2, =OSCR
- mov r3, #0
- str r3, [r2]
+ ldr r2, =OSCR
+ mov r3, #0
+ str r3, [r2]
0:
- ldr r3, [r2]
- cmp r3, \time
- bls 0b
+ ldr r3, [r2]
+ cmp r3, \time
+ bls 0b
.endm
-
+
/*
- * Memory setup
+ * Memory setup
*/
.globl lowlevel_init
lowlevel_init:
/* Set up GPIO pins first ----------------------------------------- */
- mov r10, lr
-
- /* Configure GPIO Pins 41 - 48 as UART1 / altern. Fkt. 2 */
- ldr r0, =0x40E10438 @ GPIO41 FFRXD
- ldr r1, =0x802
- str r1, [r0]
-
- ldr r0, =0x40E1043C @ GPIO42 FFTXD
- ldr r1, =0x802
- str r1, [r0]
-
- ldr r0, =0x40E10440 @ GPIO43 FFCTS
- ldr r1, =0x802
- str r1, [r0]
-
- ldr r0, =0x40E10444 @ GPIO 44 FFDCD
- ldr r1, =0x802
- str r1, [r0]
-
- ldr r0, =0x40E10448 @ GPIO 45 FFDSR
- ldr r1, =0x802
- str r1, [r0]
-
- ldr r0, =0x40E1044C @ GPIO 46 FFRI
- ldr r1, =0x802
- str r1, [r0]
-
- ldr r0, =0x40E10450 @ GPIO 47 FFDTR
- ldr r1, =0x802
- str r1, [r0]
-
- ldr r0, =0x40E10454 @ GPIO 48
- ldr r1, =0x802
- str r1, [r0]
-
- /* tebrandt - ASCR, clear the RDH bit */
- ldr r0, =ASCR
- ldr r1, [r0]
- bic r1, r1, #0x80000000
- str r1, [r0]
-
+ mov r10, lr
+
+ /* Configure GPIO Pins 41 - 48 as UART1 / altern. Fkt. 2 */
+ ldr r0, =0x40E10438 @ GPIO41 FFRXD
+ ldr r1, =0x802
+ str r1, [r0]
+
+ ldr r0, =0x40E1043C @ GPIO42 FFTXD
+ ldr r1, =0x802
+ str r1, [r0]
+
+ ldr r0, =0x40E10440 @ GPIO43 FFCTS
+ ldr r1, =0x802
+ str r1, [r0]
+
+ ldr r0, =0x40E10444 @ GPIO 44 FFDCD
+ ldr r1, =0x802
+ str r1, [r0]
+
+ ldr r0, =0x40E10448 @ GPIO 45 FFDSR
+ ldr r1, =0x802
+ str r1, [r0]
+
+ ldr r0, =0x40E1044C @ GPIO 46 FFRI
+ ldr r1, =0x802
+ str r1, [r0]
+
+ ldr r0, =0x40E10450 @ GPIO 47 FFDTR
+ ldr r1, =0x802
+ str r1, [r0]
+
+ ldr r0, =0x40E10454 @ GPIO 48
+ ldr r1, =0x802
+ str r1, [r0]
+
+ /* tebrandt - ASCR, clear the RDH bit */
+ ldr r0, =ASCR
+ ldr r1, [r0]
+ bic r1, r1, #0x80000000
+ str r1, [r0]
+
/* ---------------------------------------------------------------- */
- /* Enable memory interface */
- /* */
- /* The sequence below is based on the recommended init steps */
+ /* Enable memory interface */
+ /* */
+ /* The sequence below is based on the recommended init steps */
/* detailed in the Intel PXA250 Operating Systems Developers Guide, */
- /* Chapter 10. */
+ /* Chapter 10. */
/* ---------------------------------------------------------------- */
/* ---------------------------------------------------------------- */
- /* Step 1: Wait for at least 200 microsedonds to allow internal */
- /* clocks to settle. Only necessary after hard reset... */
- /* FIXME: can be optimized later */
+ /* Step 1: Wait for at least 200 microsedonds to allow internal */
+ /* clocks to settle. Only necessary after hard reset... */
+ /* FIXME: can be optimized later */
/* ---------------------------------------------------------------- */
/* mk: replaced with wait macro */
-/* ldr r3, =OSCR /\* reset the OS Timer Count to zero *\/ */
-/* mov r2, #0 */
-/* str r2, [r3] */
-/* ldr r4, =0x300 /\* really 0x2E1 is about 200usec, *\/ */
-/* /\* so 0x300 should be plenty *\/ */
+/* ldr r3, =OSCR /\* reset the OS Timer Count to zero *\/ */
+/* mov r2, #0 */
+/* str r2, [r3] */
+/* ldr r4, =0x300 /\* really 0x2E1 is about 200usec, *\/ */
+/* /\* so 0x300 should be plenty *\/ */
/* 1: */
-/* ldr r2, [r3] */
-/* cmp r4, r2 */
-/* bgt 1b */
+/* ldr r2, [r3] */
+/* cmp r4, r2 */
+/* bgt 1b */
wait #300
-
+
mem_init:
/* configure the MEMCLKCFG register */
- ldr r1, =MEMCLKCFG
- ldr r2, =0x00010001
- str r2, [r1] @ WRITE
- ldr r2, [r1] @ DELAY UNTIL WRITTEN
-
+ ldr r1, =MEMCLKCFG
+ ldr r2, =0x00010001
+ str r2, [r1] @ WRITE
+ ldr r2, [r1] @ DELAY UNTIL WRITTEN
+
/* set CSADRCFG[0] to data flash SRAM mode */
- ldr r1, =CSADRCFG0
- ldr r2, =0x00320809
- str r2, [r1] @ WRITE
- ldr r2, [r1] @ DELAY UNTIL WRITTEN
-
+ ldr r1, =CSADRCFG0
+ ldr r2, =0x00320809
+ str r2, [r1] @ WRITE
+ ldr r2, [r1] @ DELAY UNTIL WRITTEN
+
/* set CSADRCFG[1] to data flash SRAM mode */
- ldr r1, =CSADRCFG1
- ldr r2, =0x00320809
- str r2, [r1] @ WRITE
- ldr r2, [r1] @ DELAY UNTIL WRITTEN
-
+ ldr r1, =CSADRCFG1
+ ldr r2, =0x00320809
+ str r2, [r1] @ WRITE
+ ldr r2, [r1] @ DELAY UNTIL WRITTEN
+
/* set MSC 0 register for SRAM memory */
- ldr r1, =MSC0
- ldr r2, =0x11191119
- str r2, [r1] @ WRITE
- ldr r2, [r1] @ DELAY UNTIL WRITTEN
-
+ ldr r1, =MSC0
+ ldr r2, =0x11191119
+ str r2, [r1] @ WRITE
+ ldr r2, [r1] @ DELAY UNTIL WRITTEN
+
/* set CSADRCFG[2] to data flash SRAM mode */
- ldr r1, =CSADRCFG2
- ldr r2, =0x00320809
- str r2, [r1] @ WRITE
- ldr r2, [r1] @ DELAY UNTIL WRITTEN
-
+ ldr r1, =CSADRCFG2
+ ldr r2, =0x00320809
+ str r2, [r1] @ WRITE
+ ldr r2, [r1] @ DELAY UNTIL WRITTEN
+
/* set CSADRCFG[3] to VLIO mode */
- ldr r1, =CSADRCFG3
- ldr r2, =0x0032080B
- str r2, [r1] @ WRITE
- ldr r2, [r1] @ DELAY UNTIL WRITTEN
+ ldr r1, =CSADRCFG3
+ ldr r2, =0x0032080B
+ str r2, [r1] @ WRITE
+ ldr r2, [r1] @ DELAY UNTIL WRITTEN
/* set MSC 1 register for VLIO memory */
- ldr r1, =MSC1
- ldr r2, =0x123C1119
- str r2, [r1] @ WRITE
- ldr r2, [r1] @ DELAY UNTIL WRITTEN
+ ldr r1, =MSC1
+ ldr r2, =0x123C1119
+ str r2, [r1] @ WRITE
+ ldr r2, [r1] @ DELAY UNTIL WRITTEN
#if 0
/* This does not work in Zylonite. -SC */
@@ -222,11 +222,11 @@ mem_init:
ldr r2, [r1]
/* Hardware DDR Read-Strobe Delay Calibration */
- ldr r0, =DDR_HCAL @ DDR_HCAL
- ldr r1, =0x803ffc07 @ the offset is correct? -SC
- str r1, [r0]
+ ldr r0, =DDR_HCAL @ DDR_HCAL
+ ldr r1, =0x803ffc07 @ the offset is correct? -SC
+ str r1, [r0]
wait #5
- ldr r1, [r0]
+ ldr r1, [r0]
/* Here we assume the hardware calibration alwasy be successful. -SC */
/* Set DMCEN bit in MDCNFG Register */
@@ -236,21 +236,21 @@ mem_init:
str r1, [r0]
/* scrub/init SDRAM if enabled/present */
-/* ldr r11, =0xa0000000 /\* base address of SDRAM (CFG_DRAM_BASE) *\/ */
-/* ldr r12, =0x04000000 /\* size of memory to scrub (CFG_DRAM_SIZE) *\/ */
-/* mov r8,r12 /\* save DRAM size (mk: why???) *\/ */
- ldr r8, =0xa0000000 /* base address of SDRAM (CFG_DRAM_BASE) */
- ldr r9, =0x04000000 /* size of memory to scrub (CFG_DRAM_SIZE) */
+/* ldr r11, =0xa0000000 /\* base address of SDRAM (CFG_DRAM_BASE) *\/ */
+/* ldr r12, =0x04000000 /\* size of memory to scrub (CFG_DRAM_SIZE) *\/ */
+/* mov r8,r12 /\* save DRAM size (mk: why???) *\/ */
+ ldr r8, =0xa0000000 /* base address of SDRAM (CFG_DRAM_BASE) */
+ ldr r9, =0x04000000 /* size of memory to scrub (CFG_DRAM_SIZE) */
mov r0, #0 /* scrub with 0x0000:0000 */
mov r1, #0
- mov r2, #0
+ mov r2, #0
mov r3, #0
- mov r4, #0
+ mov r4, #0
mov r5, #0
- mov r6, #0
+ mov r6, #0
mov r7, #0
-10: /* fastScrubLoop */
- subs r9, r9, #32 // 32 bytes/line
+10: /* fastScrubLoop */
+ subs r9, r9, #32 /* 32 bytes/line */
stmia r8!, {r0-r7}
beq 15f
b 10b
@@ -262,34 +262,30 @@ mem_init:
/* Disable software and data breakpoints */
mov r0, #0
- mcr p15,0,r0,c14,c8,0 // ibcr0
- mcr p15,0,r0,c14,c9,0 // ibcr1
- mcr p15,0,r0,c14,c4,0 // dbcon
+ mcr p15,0,r0,c14,c8,0 /* ibcr0 */
+ mcr p15,0,r0,c14,c9,0 /* ibcr1 */
+ mcr p15,0,r0,c14,c4,0 /* dbcon */
/* Enable all debug functionality */
mov r0,#0x80000000
- mcr p14,0,r0,c10,c0,0 // dcsr
-
+ mcr p14,0,r0,c10,c0,0 /* dcsr */
-
/* We are finished with Intel's memory controller initialisation */
-
/* ---------------------------------------------------------------- */
- /* End lowlevel_init */
+ /* End lowlevel_init */
/* ---------------------------------------------------------------- */
endlowlevel_init:
- mov pc, lr
-
+ mov pc, lr
/*
@********************************************************************************
@ DDR calibration
-@
+@
@ This function is used to calibrate DQS delay lines.
-@ Monahans supports three ways to do it. One is software
+@ Monahans supports three ways to do it. One is software
@ calibration. Two is hardware calibration. Three is hybrid
@ calibration.
@
@@ -298,78 +294,78 @@ endlowlevel_init:
ddr_calibration:
@ Case 1: Write the correct delay value once
- @ Configure DDR_SCAL Register
- ldr r0, =DDR_SCAL @ DDR_SCAL
-q ldr r1, =0xaf2f2f2f
- str r1, [r0]
- ldr r1, [r0]
+ @ Configure DDR_SCAL Register
+ ldr r0, =DDR_SCAL @ DDR_SCAL
+q ldr r1, =0xaf2f2f2f
+ str r1, [r0]
+ ldr r1, [r0]
*/
/* @ Case 2: Software Calibration
@ Write test pattern to memory
- ldr r5, =0x0faf0faf @ Data Pattern
- ldr r4, =0xa0000000 @ DDR ram
- str r5, [r4]
+ ldr r5, =0x0faf0faf @ Data Pattern
+ ldr r4, =0xa0000000 @ DDR ram
+ str r5, [r4]
- mov r1, =0x0 @ delay count
- mov r6, =0x0
- mov r7, =0x0
+ mov r1, =0x0 @ delay count
+ mov r6, =0x0
+ mov r7, =0x0
ddr_loop1:
- add r1, r1, =0x1
- cmp r1, =0xf
- ble end_loop
- mov r3, r1
- mov r0, r1, lsl #30
- orr r3, r3, r0
- mov r0, r1, lsl #22
- orr r3, r3, r0
- mov r0, r1, lsl #14
- orr r3, r3, r0
- orr r3, r3, =0x80000000
- ldr r2, =DDR_SCAL
- str r3, [r2]
-
- ldr r2, [r4]
- cmp r2, r5
- bne ddr_loop1
- mov r6, r1
+ add r1, r1, =0x1
+ cmp r1, =0xf
+ ble end_loop
+ mov r3, r1
+ mov r0, r1, lsl #30
+ orr r3, r3, r0
+ mov r0, r1, lsl #22
+ orr r3, r3, r0
+ mov r0, r1, lsl #14
+ orr r3, r3, r0
+ orr r3, r3, =0x80000000
+ ldr r2, =DDR_SCAL
+ str r3, [r2]
+
+ ldr r2, [r4]
+ cmp r2, r5
+ bne ddr_loop1
+ mov r6, r1
ddr_loop2:
- add r1, r1, =0x1
- cmp r1, =0xf
- ble end_loop
- mov r3, r1
- mov r0, r1, lsl #30
- orr r3, r3, r0
- mov r0, r1, lsl #22
- orr r3, r3, r0
- mov r0, r1, lsl #14
- orr r3, r3, r0
- orr r3, r3, =0x80000000
- ldr r2, =DDR_SCAL
- str r3, [r2]
-
- ldr r2, [r4]
- cmp r2, r5
- be ddr_loop2
- mov r7, r2
-
- add r3, r6, r7
- lsr r3, r3, =0x1
- mov r0, r1, lsl #30
- orr r3, r3, r0
- mov r0, r1, lsl #22
- orr r3, r3, r0
- mov r0, r1, lsl #14
- orr r3, r3, r0
- orr r3, r3, =0x80000000
- ldr r2, =DDR_SCAL
-
+ add r1, r1, =0x1
+ cmp r1, =0xf
+ ble end_loop
+ mov r3, r1
+ mov r0, r1, lsl #30
+ orr r3, r3, r0
+ mov r0, r1, lsl #22
+ orr r3, r3, r0
+ mov r0, r1, lsl #14
+ orr r3, r3, r0
+ orr r3, r3, =0x80000000
+ ldr r2, =DDR_SCAL
+ str r3, [r2]
+
+ ldr r2, [r4]
+ cmp r2, r5
+ be ddr_loop2
+ mov r7, r2
+
+ add r3, r6, r7
+ lsr r3, r3, =0x1
+ mov r0, r1, lsl #30
+ orr r3, r3, r0
+ mov r0, r1, lsl #22
+ orr r3, r3, r0
+ mov r0, r1, lsl #14
+ orr r3, r3, r0
+ orr r3, r3, =0x80000000
+ ldr r2, =DDR_SCAL
+
end_loop:
@ Case 3: Hardware Calibratoin
- ldr r0, =DDR_HCAL @ DDR_HCAL
- ldr r1, =0x803ffc07 @ the offset is correct? -SC
- str r1, [r0]
- wait #5
- ldr r1, [r0]
- mov pc, lr
+ ldr r0, =DDR_HCAL @ DDR_HCAL
+ ldr r1, =0x803ffc07 @ the offset is correct? -SC
+ str r1, [r0]
+ wait #5
+ ldr r1, [r0]
+ mov pc, lr
*/
generated by cgit v1.2.3 (git 2.0.4) at 2024-11-04 23:44:09 +0000