diff options
Diffstat (limited to 'board')
84 files changed, 252 insertions, 240 deletions
diff --git a/board/BuS/EB+MCF-EV123/EB+MCF-EV123.c b/board/BuS/EB+MCF-EV123/EB+MCF-EV123.c index 02a095ef8df..73dfb3d52b9 100644 --- a/board/BuS/EB+MCF-EV123/EB+MCF-EV123.c +++ b/board/BuS/EB+MCF-EV123/EB+MCF-EV123.c @@ -156,7 +156,7 @@ int do_vcimage (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( vcimage, 2, 0, do_vcimage, "loads an image to Display", - "vcimage addr\n" + "vcimage addr" ); /* EOF EB+MCF-EV123c */ diff --git a/board/ads5121/ads5121_diu.c b/board/ads5121/ads5121_diu.c index 41a135314f4..1dd60afa4f1 100644 --- a/board/ads5121/ads5121_diu.c +++ b/board/ads5121/ads5121_diu.c @@ -131,7 +131,7 @@ U_BOOT_CMD( diufb, CONFIG_SYS_MAXARGS, 1, ads5121diu_init_show_bmp, "Init or Display BMP file", "init\n - initialize DIU\n" - "addr\n - display bmp at address 'addr'\n" + "addr\n - display bmp at address 'addr'" ); diff --git a/board/amcc/acadia/cmd_acadia.c b/board/amcc/acadia/cmd_acadia.c index d47cf1af574..c427f9ebc67 100644 --- a/board/amcc/acadia/cmd_acadia.c +++ b/board/amcc/acadia/cmd_acadia.c @@ -97,5 +97,5 @@ static int do_bootstrap(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( bootstrap, 3, 0, do_bootstrap, "program the I2C bootstrap EEPROM", - "<cpu-freq> <nor|nand> - program the I2C bootstrap EEPROM\n" - ); + "<cpu-freq> <nor|nand> - program the I2C bootstrap EEPROM" +); diff --git a/board/amcc/canyonlands/bootstrap.c b/board/amcc/canyonlands/bootstrap.c index 30046fee3ab..6dc2ccae96f 100644 --- a/board/amcc/canyonlands/bootstrap.c +++ b/board/amcc/canyonlands/bootstrap.c @@ -191,5 +191,5 @@ static int do_bootstrap(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( bootstrap, 2, 0, do_bootstrap, "program the I2C bootstrap EEPROM", - "<nand|nor> - strap to boot from NAND or NOR flash\n" - ); + "<nand|nor> - strap to boot from NAND or NOR flash" +); diff --git a/board/amcc/katmai/cmd_katmai.c b/board/amcc/katmai/cmd_katmai.c index 2c2849b015a..335d30c368e 100644 --- a/board/amcc/katmai/cmd_katmai.c +++ b/board/amcc/katmai/cmd_katmai.c @@ -214,5 +214,5 @@ static int do_bootstrap(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( bootstrap, 3, 1, do_bootstrap, "program the serial device strap", - "wrclk [prom0|prom1] - program the serial device strap\n" - ); + "wrclk [prom0|prom1] - program the serial device strap" +); diff --git a/board/amcc/kilauea/cmd_pll.c b/board/amcc/kilauea/cmd_pll.c index 6b38493e59c..9bae67e5633 100644 --- a/board/amcc/kilauea/cmd_pll.c +++ b/board/amcc/kilauea/cmd_pll.c @@ -291,7 +291,7 @@ U_BOOT_CMD( RCONF: Read current eeprom configuration. \n\ -----------------------------------------------\n\ WTEST: Test EEPROM write with predefined values\n\ - -----------------------------------------------\n" - ); + -----------------------------------------------" +); #endif /* CONFIG_CMD_EEPROM */ diff --git a/board/amcc/luan/luan.c b/board/amcc/luan/luan.c index d2a3b9ec3d4..7d02d904e09 100644 --- a/board/amcc/luan/luan.c +++ b/board/amcc/luan/luan.c @@ -331,5 +331,5 @@ U_BOOT_CMD( l2cache, 2, 1, do_l2cache, "enable or disable L2 cache", "[on, off]\n" - " - enable or disable L2 cache\n" - ); + " - enable or disable L2 cache" +); diff --git a/board/amcc/makalu/cmd_pll.c b/board/amcc/makalu/cmd_pll.c index 6b38493e59c..9bae67e5633 100644 --- a/board/amcc/makalu/cmd_pll.c +++ b/board/amcc/makalu/cmd_pll.c @@ -291,7 +291,7 @@ U_BOOT_CMD( RCONF: Read current eeprom configuration. \n\ -----------------------------------------------\n\ WTEST: Test EEPROM write with predefined values\n\ - -----------------------------------------------\n" - ); + -----------------------------------------------" +); #endif /* CONFIG_CMD_EEPROM */ diff --git a/board/amcc/sequoia/cmd_sequoia.c b/board/amcc/sequoia/cmd_sequoia.c index 6dfd8ba381f..01dd97c84db 100644 --- a/board/amcc/sequoia/cmd_sequoia.c +++ b/board/amcc/sequoia/cmd_sequoia.c @@ -227,5 +227,5 @@ static int do_bootstrap(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( bootstrap, 2, 0, do_bootstrap, "program the I2C bootstrap EEPROM", - "<nand|nor> - strap to boot from NAND or NOR flash\n" - ); + "<nand|nor> - strap to boot from NAND or NOR flash" +); diff --git a/board/amcc/taihu/lcd.c b/board/amcc/taihu/lcd.c index 6b68f335634..c3dc9837b50 100644 --- a/board/amcc/taihu/lcd.c +++ b/board/amcc/taihu/lcd.c @@ -233,25 +233,25 @@ static int do_lcd_cur (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( lcd_cls, 1, 1, do_lcd_clear, "lcd clear display", - NULL - ); + "" +); U_BOOT_CMD( lcd_puts, 2, 1, do_lcd_puts, "display string on lcd", - "<string> - <string> to be displayed\n" - ); + "<string> - <string> to be displayed" +); U_BOOT_CMD( lcd_putc, 2, 1, do_lcd_putc, "display char on lcd", - "<char> - <char> to be displayed\n" - ); + "<char> - <char> to be displayed" +); U_BOOT_CMD( lcd_cur, 3, 1, do_lcd_cur, "shift cursor on lcd", "<count> <dir> - shift cursor on lcd <count> times, direction is <dir> \n" " <count> - 0..31\n" - " <dir> - 0=backward 1=forward\n" - ); + " <dir> - 0=backward 1=forward" +); diff --git a/board/amcc/taihu/taihu.c b/board/amcc/taihu/taihu.c index 669429b67ff..d8806ac32dd 100644 --- a/board/amcc/taihu/taihu.c +++ b/board/amcc/taihu/taihu.c @@ -94,8 +94,8 @@ static int do_sw_stat(cmd_tbl_t* cmd_tp, int flags, int argc, char *argv[]) U_BOOT_CMD ( sw2_stat, 1, 1, do_sw_stat, "show status of switch 2", - NULL - ); + "" +); static int do_led_ctl(cmd_tbl_t* cmd_tp, int flags, int argc, char *argv[]) { @@ -134,8 +134,8 @@ U_BOOT_CMD ( led_ctl, 3, 1, do_led_ctl, "make led 1 or 2 on or off", "<led_no> <on/off> - make led <led_no> on/off,\n" - "\tled_no is 1 or 2\t" - ); + "\tled_no is 1 or 2" +); #define SPI_CS_GPIO0 0 #define SPI_SCLK_GPIO14 14 diff --git a/board/amcc/taihu/update.c b/board/amcc/taihu/update.c index 8e969056cc9..f9c31b3927b 100644 --- a/board/amcc/taihu/update.c +++ b/board/amcc/taihu/update.c @@ -128,5 +128,5 @@ static int update_boot_eeprom(cmd_tbl_t* cmdtp, int flag, int argc, char *argv[] U_BOOT_CMD ( update_boot_eeprom, 1, 1, update_boot_eeprom, "update boot eeprom content", - NULL - ); + "" +); diff --git a/board/amcc/taishan/lcd.c b/board/amcc/taishan/lcd.c index e4d070570aa..d432cc3d056 100644 --- a/board/amcc/taishan/lcd.c +++ b/board/amcc/taishan/lcd.c @@ -254,18 +254,18 @@ static int do_lcd_cur(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) return 0; } -U_BOOT_CMD(lcd_test, 1, 1, do_lcd_test, "lcd test display", NULL); -U_BOOT_CMD(lcd_cls, 1, 1, do_lcd_clear, "lcd clear display", NULL); +U_BOOT_CMD(lcd_test, 1, 1, do_lcd_test, "lcd test display", ""); +U_BOOT_CMD(lcd_cls, 1, 1, do_lcd_clear, "lcd clear display", ""); U_BOOT_CMD(lcd_puts, 2, 1, do_lcd_puts, "display string on lcd", - "<string> - <string> to be displayed\n"); + "<string> - <string> to be displayed"); U_BOOT_CMD(lcd_putc, 2, 1, do_lcd_putc, "display char on lcd", - "<char> - <char> to be displayed\n"); + "<char> - <char> to be displayed"); U_BOOT_CMD(lcd_cur, 3, 1, do_lcd_cur, "shift cursor on lcd", "<count> <dir>- shift cursor on lcd <count> times, direction is <dir> \n" - " <count> - 0~31\n" " <dir> - 0,backward; 1, forward\n"); + " <count> - 0~31\n" " <dir> - 0,backward; 1, forward"); #if 0 /* test-only */ void set_phy_loopback_mode(void) @@ -373,8 +373,8 @@ static int do_led_test_on(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD(ledon, 1, 1, do_led_test_on, - "led test light on", NULL); + "led test light on", ""); U_BOOT_CMD(ledoff, 1, 1, do_led_test_off, - "led test light off", NULL); + "led test light off", ""); #endif diff --git a/board/amcc/taishan/showinfo.c b/board/amcc/taishan/showinfo.c index b471c956e4e..2a78a22e65e 100644 --- a/board/amcc/taishan/showinfo.c +++ b/board/amcc/taishan/showinfo.c @@ -168,7 +168,7 @@ int do_show_xbridge_info(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD(xbriinfo, 1, 1, do_show_xbridge_info, - "Show PCIX bridge info", NULL); + "Show PCIX bridge info", ""); #define TAISHAN_PCI_DEV_ID0 0x800 #define TAISHAN_PCI_DEV_ID1 0x1000 @@ -222,7 +222,7 @@ int do_show_pcix_device_info(cmd_tbl_t * cmdtp, int flag, int argc, } U_BOOT_CMD(xdevinfo, 1, 1, do_show_pcix_device_info, - "Show PCIX Device info", NULL); + "Show PCIX Device info", ""); extern void show_reset_reg(void); @@ -233,4 +233,4 @@ int do_show_reset_reg_info(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD(resetinfo, 1, 1, do_show_reset_reg_info, - "Show Reset REG info", NULL); + "Show Reset REG info", ""); diff --git a/board/amcc/taishan/update.c b/board/amcc/taishan/update.c index 63f874488e6..aab3a6577c0 100644 --- a/board/amcc/taishan/update.c +++ b/board/amcc/taishan/update.c @@ -74,5 +74,5 @@ int do_update_boot_eeprom(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD(update_boot_eeprom, 1, 1, do_update_boot_eeprom, - "update bootstrap eeprom content", NULL); + "update bootstrap eeprom content", ""); #endif diff --git a/board/amcc/yucca/cmd_yucca.c b/board/amcc/yucca/cmd_yucca.c index d2ca2572d7d..ed6daa38993 100644 --- a/board/amcc/yucca/cmd_yucca.c +++ b/board/amcc/yucca/cmd_yucca.c @@ -282,5 +282,5 @@ static int setBootStrapClock(cmd_tbl_t *cmdtp, int incrflag, int flag, U_BOOT_CMD( evb440spe, 3, 1, do_evb440spe, "program the serial device strap", - "wrclk [prom0|prom1] - program the serial device strap\n" + "wrclk [prom0|prom1] - program the serial device strap" ); diff --git a/board/amirix/ap1000/ap1000.c b/board/amirix/ap1000/ap1000.c index fcf26984ff5..cadfe0b5bc0 100644 --- a/board/amirix/ap1000/ap1000.c +++ b/board/amirix/ap1000/ap1000.c @@ -670,14 +670,14 @@ U_BOOT_CMD (temp, 6, 0, do_temp_sensor, " - Set config options.\n" "\n" "All values can be decimal or hex (hex preceded with 0x).\n" - "Only whole numbers are supported for external limits.\n"); + "Only whole numbers are supported for external limits."); #if 0 U_BOOT_CMD (loadace, 2, 0, do_loadace, "load fpga configuration from System ACE compact flash", "N\n" " - Load configuration N (0-7) from System ACE compact flash\n" - "loadace\n" " - loads default configuration\n"); + "loadace\n" " - loads default configuration"); #endif U_BOOT_CMD (swconfig, 2, 0, do_swconfigbyte, @@ -685,19 +685,19 @@ U_BOOT_CMD (swconfig, 2, 0, do_swconfigbyte, "N [ADDRESS]\n" " - set software configuration byte to N, optionally use ADDRESS as\n" " location of buffer for flash copy\n" - "swconfig\n" " - display software configuration byte\n"); + "swconfig\n" " - display software configuration byte"); U_BOOT_CMD (pause, 2, 0, do_pause, "sleep processor until any key is pressed with poll time of N seconds", "N\n" " - sleep processor until any key is pressed with poll time of N seconds\n" "pause\n" - " - sleep processor until any key is pressed with poll time of 1 second\n"); + " - sleep processor until any key is pressed with poll time of 1 second"); U_BOOT_CMD (swrecon, 1, 0, do_swreconfig, "trigger a board reconfigure to the software selected configuration", "\n" - " - trigger a board reconfigure to the software selected configuration\n"); + " - trigger a board reconfigure to the software selected configuration"); int board_eth_init(bd_t *bis) { diff --git a/board/amirix/ap1000/powerspan.c b/board/amirix/ap1000/powerspan.c index f727061df7b..28e2bbc4783 100644 --- a/board/amirix/ap1000/powerspan.c +++ b/board/amirix/ap1000/powerspan.c @@ -487,7 +487,7 @@ U_BOOT_CMD (eeprom, 4, 0, do_eeprom, " - store contents of eeprom at address ADD\n" "eeprom p ADD\n" " - put data stored at address ADD into the eeprom\n" - "eeprom d\n" " - return eeprom to default contents\n"); + "eeprom d\n" " - return eeprom to default contents"); unsigned int PowerSpanRead (unsigned int theOffset) { diff --git a/board/barco/barco.c b/board/barco/barco.c index a19e1edabb2..d7a00782b8b 100644 --- a/board/barco/barco.c +++ b/board/barco/barco.c @@ -307,19 +307,19 @@ int barcobcd_boot_image (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD ( try_working, 1, 1, barcobcd_boot_image, "check flash value and boot the appropriate image", - "\n" + "" ); U_BOOT_CMD ( boot_working, 1, 1, barcobcd_boot_image, "check flash value and boot the appropriate image", - "\n" + "" ); U_BOOT_CMD ( boot_default, 1, 1, barcobcd_boot_image, "check flash value and boot the appropriate image", - "\n" + "" ); /* * We are not using serial communication, so just provide empty functions diff --git a/board/bc3450/cmd_bc3450.c b/board/bc3450/cmd_bc3450.c index aa46e5812f2..271ffb1d1fa 100644 --- a/board/bc3450/cmd_bc3450.c +++ b/board/bc3450/cmd_bc3450.c @@ -198,7 +198,7 @@ U_BOOT_CMD (dip, 1, 1, cmd_dip, "\n" " - prints the state of the dip switch and/or\n" " external configuration inputs as hex value.\n" - " - \"Config 1\" is the LSB\n"); + " - \"Config 1\" is the LSB"); /* @@ -229,7 +229,7 @@ static int cmd_buz (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD (buz, 2, 1, cmd_buz, "turns buzzer on/off", - "\n" "buz <on/off>\n" " - turns the buzzer on or off\n"); + "\n" "buz <on/off>\n" " - turns the buzzer on or off"); #endif /* CONFIG_BC3450_BUZZER */ @@ -326,14 +326,14 @@ U_BOOT_CMD (fp, 3, 1, cmd_fp, "\n" "fp bl <on/off>\n" " - turns the CCFL backlight of the display on/off\n" - "fp <on/off>\n" " - turns the whole display on/off\n" + "fp <on/off>\n" " - turns the whole display on/off" #ifdef CONFIG_BC3450_CRT + "\n" "fp crt <on/off>\n" - " - enables/disables the crt output (debug only)\n" + " - enables/disables the crt output (debug only)" #endif /* CONFIG_BC3450_CRT */ ); - /* * temp - DS1620 thermometer */ @@ -524,7 +524,7 @@ static int cmd_temp (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD (temp, 3, 1, cmd_temp, "print current temperature", - "\n" "temp\n" " - print current temperature\n"); + "\n" "temp\n" " - print current temperature"); #ifdef CONFIG_BC3450_CAN /* @@ -818,10 +818,11 @@ int cmd_test (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD (test, 2, 1, cmd_test, "unit test routines", "\n" #ifdef CONFIG_BC3450_CAN - "test can\n" - " - connect CAN1 (X8) with CAN2 (X9) for this test\n" + "test can\n" + " - connect CAN1 (X8) with CAN2 (X9) for this test\n" #endif /* CONFIG_BC3450_CAN */ - "test unit-off\n" - " - turns off the BC3450 unit\n" - " WARNING: Unsaved environment variables will be lost!\n"); + "test unit-off\n" + " - turns off the BC3450 unit\n" + " WARNING: Unsaved environment variables will be lost!" +); #endif diff --git a/board/bf537-stamp/cmd_bf537led.c b/board/bf537-stamp/cmd_bf537led.c index e77bb0cb19a..e65c4f83595 100644 --- a/board/bf537-stamp/cmd_bf537led.c +++ b/board/bf537-stamp/cmd_bf537led.c @@ -33,7 +33,7 @@ "led <number> <action>\n" \ " <number> - Index (0-5) of LED to change, or \"all\"\n" \ " <action> - Must be one of:\n" \ - " on off toggle\n" + " on off toggle" /* Number of LEDs supported by the board */ #define NUMBER_LEDS 6 @@ -191,7 +191,7 @@ void set_led_state(int index, int state) /* Display usage information */ void show_cmd_usage() { - printf("Usage:\n%s", USAGE_LONG); + printf("Usage:\n%s\n", USAGE_LONG); } /* Register information for u-boot to find this command */ diff --git a/board/cm5200/cmd_cm5200.c b/board/cm5200/cmd_cm5200.c index f009eede276..cd98ae219fd 100644 --- a/board/cm5200/cmd_cm5200.c +++ b/board/cm5200/cmd_cm5200.c @@ -443,6 +443,6 @@ U_BOOT_CMD( "fkt rs232 number\n" " - Test RS232 (loopback plug(s) for RS232 required)\n" "fkt usb\n" - " - Test USB communication\n" + " - Test USB communication" ); #endif /* CONFIG_CMD_BSP */ diff --git a/board/delta/delta.c b/board/delta/delta.c index 73e6c3e3747..84ff47e53c7 100644 --- a/board/delta/delta.c +++ b/board/delta/delta.c @@ -260,7 +260,7 @@ int do_kbd (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( kbd, 1, 1, do_kbd, "read keyboard status", - NULL + "" ); #endif /* DELTA_CHECK_KEYBD */ diff --git a/board/esd/ar405/ar405.c b/board/esd/ar405/ar405.c index 14520e11a6e..9d1b6d26442 100644 --- a/board/esd/ar405/ar405.c +++ b/board/esd/ar405/ar405.c @@ -247,9 +247,8 @@ int do_digtest(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( digtest, 3, 1, do_digtest, "Test digital in-/output", - NULL - ); - + "" +); #define ERROR_DELTA 256 @@ -341,8 +340,8 @@ int do_anatest(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( anatest, 2, 1, do_anatest, "Test analog in-/output", - NULL - ); + "" +); int counter = 0; @@ -408,6 +407,6 @@ int do_inctest(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( inctest, 3, 1, do_inctest, "Test incremental encoder inputs", - NULL - ); + "" +); #endif diff --git a/board/esd/cms700/cms700.c b/board/esd/cms700/cms700.c index 658a26796a1..01b12232b19 100644 --- a/board/esd/cms700/cms700.c +++ b/board/esd/cms700/cms700.c @@ -189,8 +189,9 @@ int do_eep_wren (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD(eepwren, 2, 0, do_eep_wren, - "Enable / disable / query EEPROM write access", - NULL); + "Enable / disable / query EEPROM write access", + "" +); #endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */ /* ------------------------------------------------------------------------- */ diff --git a/board/esd/common/auto_update.c b/board/esd/common/auto_update.c index 8593125ef1d..33aeb46d264 100644 --- a/board/esd/common/auto_update.c +++ b/board/esd/common/auto_update.c @@ -551,6 +551,6 @@ int auto_update(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( autoupd, 1, 1, auto_update, "Automatically update images", - NULL + "" ); #endif /* CONFIG_AUTO_UPDATE */ diff --git a/board/esd/common/cmd_loadpci.c b/board/esd/common/cmd_loadpci.c index c779f793d8a..47e946f116a 100644 --- a/board/esd/common/cmd_loadpci.c +++ b/board/esd/common/cmd_loadpci.c @@ -124,7 +124,7 @@ int do_loadpci(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( loadpci, 1, 1, do_loadpci, "Wait for pci bootcmd and boot it", - NULL - ); + "" +); #endif diff --git a/board/esd/common/lcd.c b/board/esd/common/lcd.c index 066df74bf38..5c50b4c8dca 100644 --- a/board/esd/common/lcd.c +++ b/board/esd/common/lcd.c @@ -373,5 +373,5 @@ int do_esdbmp(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( esdbmp, 2, 1, do_esdbmp, "display BMP image", - "<imageAddr> - display image\n" + "<imageAddr> - display image" ); diff --git a/board/esd/common/xilinx_jtag/micro.c b/board/esd/common/xilinx_jtag/micro.c index 37ac0cc4eb7..414e82135c8 100644 --- a/board/esd/common/xilinx_jtag/micro.c +++ b/board/esd/common/xilinx_jtag/micro.c @@ -1869,4 +1869,4 @@ U_BOOT_CMD( cpld, 2, 1, do_cpld, "program onboard CPLD", "<xsvf-addr>" - ); +); diff --git a/board/esd/cpci2dp/cpci2dp.c b/board/esd/cpci2dp/cpci2dp.c index aba240f1728..cd57ed4598c 100644 --- a/board/esd/cpci2dp/cpci2dp.c +++ b/board/esd/cpci2dp/cpci2dp.c @@ -183,6 +183,6 @@ int do_eep_wren (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( eepwren, 2, 0, do_eep_wren, "Enable / disable / query EEPROM write access", - NULL - ); + "" +); #endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */ diff --git a/board/esd/cpci405/cpci405.c b/board/esd/cpci405/cpci405.c index ccbe245d76f..a677c623f78 100644 --- a/board/esd/cpci405/cpci405.c +++ b/board/esd/cpci405/cpci405.c @@ -690,8 +690,8 @@ int do_onewire(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( onewire, 1, 1, do_onewire, "Read 1-write ID", - NULL - ); + "" +); #define CONFIG_SYS_I2C_EEPROM_ADDR_2 0x51 /* EEPROM CAT24WC32 */ #define CONFIG_ENV_SIZE_2 0x800 /* 2048 bytes may be used for env vars */ @@ -751,8 +751,8 @@ int do_get_bpip(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( getbpip, 1, 1, do_get_bpip, "Update IP-Address with Backplane IP-Address", - NULL - ); + "" +); /* * Set and print backplane ip... @@ -787,7 +787,7 @@ int do_set_bpip(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( setbpip, 2, 1, do_set_bpip, "Write Backplane IP-Address", - NULL - ); + "" +); #endif /* CONFIG_CPCI405AB */ diff --git a/board/esd/cpci5200/cpci5200.c b/board/esd/cpci5200/cpci5200.c index b6b50fb46e1..36fcf7f87dd 100644 --- a/board/esd/cpci5200/cpci5200.c +++ b/board/esd/cpci5200/cpci5200.c @@ -295,4 +295,6 @@ int do_writepci(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD(writepci, 3, 1, do_writepci, "Write some data to pcibus", - "<addr> <size>\n" " - Write some data to pcibus.\n"); + "<addr> <size>\n" + "" +); diff --git a/board/esd/cpci750/cpci750.c b/board/esd/cpci750/cpci750.c index 482663398aa..258d8b234bc 100644 --- a/board/esd/cpci750/cpci750.c +++ b/board/esd/cpci750/cpci750.c @@ -994,5 +994,5 @@ int do_show_config(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( show_config, 1, 1, do_show_config, "Show Marvell strapping register", - "Show Marvell strapping register (ResetSampleLow ResetSampleHigh)\n" - ); + "Show Marvell strapping register (ResetSampleLow ResetSampleHigh)" +); diff --git a/board/esd/dasa_sim/cmd_dasa_sim.c b/board/esd/dasa_sim/cmd_dasa_sim.c index 0310c47cf13..675e5071d73 100644 --- a/board/esd/dasa_sim/cmd_dasa_sim.c +++ b/board/esd/dasa_sim/cmd_dasa_sim.c @@ -230,7 +230,7 @@ U_BOOT_CMD( pci9054, 3, 1, do_pci9054, "PLX PCI9054 EEPROM access", "pci9054 info - print EEPROM values\n" - "pci9054 update - updates EEPROM with default values\n" + "pci9054 update - updates EEPROM with default values" ); /* ------------------------------------------------------------------------- */ diff --git a/board/esd/du440/du440.c b/board/esd/du440/du440.c index 45dfa6fd774..0ec519b8db6 100644 --- a/board/esd/du440/du440.c +++ b/board/esd/du440/du440.c @@ -607,8 +607,8 @@ int do_dcf77(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( dcf77, 1, 1, do_dcf77, "Check DCF77 receiver", - NULL - ); + "" +); /* * initialize USB hub via I2C1 @@ -657,8 +657,8 @@ int do_hubinit(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( hubinit, 1, 1, do_hubinit, "Initialize USB hub", - NULL - ); + "" +); #endif /* CONFIG_I2C_MULTI_BUS */ #define CONFIG_SYS_BOOT_EEPROM_PAGE_WRITE_BITS 3 @@ -790,8 +790,8 @@ int do_setup_boot_eeprom(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( sbe, 2, 0, do_setup_boot_eeprom, "setup boot eeprom", - NULL - ); + "" +); #if defined(CONFIG_SYS_EEPROM_WREN) /* @@ -863,8 +863,9 @@ int do_eep_wren (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD(eepwren, 2, 0, do_eep_wren, - "Enable / disable / query EEPROM write access", - NULL); + "Enable / disable / query EEPROM write access", + "" +); #endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */ static int got_pldirq; @@ -916,8 +917,8 @@ int do_waitpwrirq(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( wpi, 1, 1, do_waitpwrirq, "Wait for power change interrupt", - NULL - ); + "" +); /* * initialize DVI panellink transmitter @@ -961,8 +962,8 @@ int do_dviinit(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( dviinit, 1, 1, do_dviinit, "Initialize DVI Panellink transmitter", - NULL - ); + "" +); /* * TODO: 'time' command might be useful for others as well. @@ -1001,8 +1002,8 @@ int do_time(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( time, CONFIG_SYS_MAXARGS, 1, do_time, "run command and output execution time", - NULL - ); + "" +); extern void video_hw_rectfill ( unsigned int bpp, /* bytes per pixel */ @@ -1051,5 +1052,5 @@ int do_gfxdemo(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( gfxdemo, CONFIG_SYS_MAXARGS, 1, do_gfxdemo, "demo", - NULL - ); + "" +); diff --git a/board/esd/hh405/hh405.c b/board/esd/hh405/hh405.c index eab952c566b..5ae4c75861e 100644 --- a/board/esd/hh405/hh405.c +++ b/board/esd/hh405/hh405.c @@ -769,8 +769,9 @@ int do_eep_wren (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD(eepwren, 2, 0, do_eep_wren, - "Enable / disable / query EEPROM write access", - NULL); + "Enable / disable / query EEPROM write access", + "" +); #endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */ diff --git a/board/esd/ocrtc/cmd_ocrtc.c b/board/esd/ocrtc/cmd_ocrtc.c index db2c5484210..5f3254d2526 100644 --- a/board/esd/ocrtc/cmd_ocrtc.c +++ b/board/esd/ocrtc/cmd_ocrtc.c @@ -55,7 +55,7 @@ int do_setdevice(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( setdevice, 1, 1, do_setdevice, "Set device number on pci adapter boards", - NULL + "" ); @@ -78,7 +78,7 @@ int do_getdevice(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( getdevice, 1, 1, do_getdevice, "Get device number and set slot env variable", - NULL + "" ); #endif diff --git a/board/esd/pci405/cmd_pci405.c b/board/esd/pci405/cmd_pci405.c index a0d1f3f0d16..1d14611293e 100644 --- a/board/esd/pci405/cmd_pci405.c +++ b/board/esd/pci405/cmd_pci405.c @@ -109,6 +109,6 @@ int do_loadpci(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( loadpci, 1, 1, do_loadpci, "Wait for pci-image and boot it", - NULL + "" ); #endif diff --git a/board/esd/pci405/pci405.c b/board/esd/pci405/pci405.c index 8973f97095c..56184caa8f4 100644 --- a/board/esd/pci405/pci405.c +++ b/board/esd/pci405/pci405.c @@ -381,5 +381,5 @@ U_BOOT_CMD( "wpeeprom 1\n" " - enable I2C EEPROM write protection\n" "wpeeprom 0\n" - " - disable I2C EEPROM write protection\n" - ); + " - disable I2C EEPROM write protection" +); diff --git a/board/esd/pf5200/pf5200.c b/board/esd/pf5200/pf5200.c index f225f0e1964..4e64e83bf65 100644 --- a/board/esd/pf5200/pf5200.c +++ b/board/esd/pf5200/pf5200.c @@ -294,7 +294,7 @@ int do_poweroff(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) return (0); } -U_BOOT_CMD(poweroff, 1, 1, do_poweroff, "Switch off power", NULL); +U_BOOT_CMD(poweroff, 1, 1, do_poweroff, "Switch off power", ""); int phypower(int flag) { @@ -338,7 +338,7 @@ int do_phypower(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD(phypower, 2, 2, do_phypower, - "Switch power of ethernet phy", NULL); + "Switch power of ethernet phy", ""); int do_writepci(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) { @@ -369,5 +369,7 @@ int do_writepci(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD(writepci, 3, 1, do_writepci, - "Write some data to pcibus", - "<addr> <size>\n" " - Write some data to pcibus.\n"); + "Write some data to pcibus", + "<addr> <size>\n" + "" +); diff --git a/board/esd/plu405/plu405.c b/board/esd/plu405/plu405.c index a94604a2f2c..fdacbf6f6b1 100644 --- a/board/esd/plu405/plu405.c +++ b/board/esd/plu405/plu405.c @@ -333,6 +333,7 @@ int do_eep_wren (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD(eepwren, 2, 0, do_eep_wren, - "Enable / disable / query EEPROM write access", - NULL); + "Enable / disable / query EEPROM write access", + "" +); #endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */ diff --git a/board/esd/pmc440/cmd_pmc440.c b/board/esd/pmc440/cmd_pmc440.c index 0fbc3dc239f..1af431bd7d1 100644 --- a/board/esd/pmc440/cmd_pmc440.c +++ b/board/esd/pmc440/cmd_pmc440.c @@ -99,8 +99,8 @@ int do_waithci(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( waithci, 1, 1, do_waithci, "Wait for host control interrupt", - NULL - ); + "" +); void dump_fifo(pmc440_fpga_t *fpga, int f, int *n) { @@ -266,8 +266,8 @@ U_BOOT_CMD( " - with 'wait' argument: interrupt driven read from all fifos\n" " - with 'read' argument: read current contents from all fifos\n" " - with 'write' argument: write 'data' 'cnt' times to " - "'fifo' or 'address'\n" - ); + "'fifo' or 'address'" +); int do_setup_bootstrap_eeprom(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) { @@ -338,7 +338,7 @@ U_BOOT_CMD( sbe, 4, 0, do_setup_bootstrap_eeprom, "setup bootstrap eeprom", "<cpufreq:400|533|667> [<console-uart:0|1> [<bringup delay (0..20s)>]]" - ); +); #if defined(CONFIG_PRAM) #include <environment.h> @@ -400,8 +400,8 @@ int do_painit(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( painit, 1, 1, do_painit, "prepare PciAccess system", - NULL - ); + "" +); #endif /* CONFIG_PRAM */ int do_selfreset(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) @@ -412,8 +412,8 @@ int do_selfreset(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( selfreset, 1, 1, do_selfreset, "assert self-reset# signal", - NULL - ); + "" +); int do_resetout(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) { @@ -449,8 +449,8 @@ int do_resetout(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( resetout, 2, 1, do_resetout, "assert PMC-RESETOUT# signal", - NULL - ); + "" +); int do_inta(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) { @@ -481,8 +481,8 @@ int do_inta(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( inta, 2, 1, do_inta, "Assert/Deassert or query INTA# state in non-monarch mode", - NULL - ); + "" +); /* test-only */ int do_pmm(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) @@ -514,8 +514,8 @@ int do_pmm(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( pmm, 2, 1, do_pmm, "Setup pmm[1] registers", - "<pciaddr> (pciaddr will be aligned to 256MB)\n" - ); + "<pciaddr> (pciaddr will be aligned to 256MB)" +); #if defined(CONFIG_SYS_EEPROM_WREN) int do_eep_wren(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) @@ -549,8 +549,9 @@ int do_eep_wren(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) return state; } U_BOOT_CMD(eepwren, 2, 0, do_eep_wren, - "Enable / disable / query EEPROM write access", - NULL); + "Enable / disable / query EEPROM write access", + "" +); #endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */ #endif /* CONFIG_CMD_BSP */ diff --git a/board/esd/tasreg/tasreg.c b/board/esd/tasreg/tasreg.c index 9602ee59fdd..18444427fed 100644 --- a/board/esd/tasreg/tasreg.c +++ b/board/esd/tasreg/tasreg.c @@ -250,8 +250,8 @@ int do_iploop(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( iploop, 2, 1, do_iploop, "i2c probe loop <addr>", - NULL - ); + "" +); /* */ @@ -303,8 +303,8 @@ int do_codec(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( codec, 1, 1, do_codec, "Enable codec", - NULL - ); + "" +); /* */ @@ -336,8 +336,8 @@ int do_saa(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( saa, 5, 1, do_saa, "Write to SAA1064 <addr> <instr> <cntrl> <data>", - NULL - ); + "" +); /* */ @@ -375,8 +375,8 @@ int do_iwrite(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( iwrite, 6, 1, do_iwrite, "Write n bytes to I2C-device", - "addr cnt data0 ... datan\n" - ); + "addr cnt data0 ... datan" +); /* */ @@ -407,8 +407,8 @@ int do_iread(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( iread, 3, 1, do_iread, "Read from I2C <addr> <cnt>", - NULL - ); + "" +); /* */ @@ -445,6 +445,6 @@ int do_ireadl(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( ireadl, 2, 1, do_ireadl, "Read-loop from I2C <addr>", - NULL - ); + "" +); #endif diff --git a/board/esd/voh405/voh405.c b/board/esd/voh405/voh405.c index 96a04b3ff8e..91275507e0f 100644 --- a/board/esd/voh405/voh405.c +++ b/board/esd/voh405/voh405.c @@ -392,6 +392,7 @@ int do_eep_wren (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD(eepwren, 2, 0, do_eep_wren, - "Enable / disable / query EEPROM write access", - NULL); + "Enable / disable / query EEPROM write access", + "" +); #endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */ diff --git a/board/evb64260/zuma_pbb.c b/board/evb64260/zuma_pbb.c index aef9c27e79f..cab4fcae174 100644 --- a/board/evb64260/zuma_pbb.c +++ b/board/evb64260/zuma_pbb.c @@ -204,19 +204,17 @@ U_BOOT_CMD( zinit, 1, 0, do_zuma_init_pbb, "init zuma pbb", "\n" - " - init zuma pbb\n" ); U_BOOT_CMD( zdtest, 3, 1, do_zuma_test_dma, "run dma test", "[cmd [count]]\n" - " - run dma cmd (w=0,v=1,cp=2,cmp=3,wi=4,vi=5), count bytes\n" + " - run dma cmd (w=0,v=1,cp=2,cmp=3,wi=4,vi=5), count bytes" ); U_BOOT_CMD( zminit, 1, 0, do_zuma_init_mbox, "init zuma mbox", "\n" - " - init zuma mbox\n" ); #endif diff --git a/board/freescale/common/pixis.c b/board/freescale/common/pixis.c index eb76d937f86..4851f066e72 100644 --- a/board/freescale/common/pixis.c +++ b/board/freescale/common/pixis.c @@ -279,9 +279,10 @@ int pixis_disable_watchdog_cmd(cmd_tbl_t *cmdtp, } U_BOOT_CMD( - diswd, 1, 0, pixis_disable_watchdog_cmd, - "Disable watchdog timer", - NULL); + diswd, 1, 0, pixis_disable_watchdog_cmd, + "Disable watchdog timer", + "" +); #ifdef CONFIG_PIXIS_SGMII_CMD int pixis_set_sgmii(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) @@ -343,14 +344,15 @@ int pixis_set_sgmii(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD( - pixis_set_sgmii, CONFIG_SYS_MAXARGS, 1, pixis_set_sgmii, - "pixis_set_sgmii" - " - Enable or disable SGMII mode for a given TSEC \n", - "\npixis_set_sgmii [TSEC num] <on|off|switch>\n" - " TSEC num: 1,2,3,4 or 'all'. 'all' is default.\n" - " on - enables SGMII\n" - " off - disables SGMII\n" - " switch - use switch settings\n"); + pixis_set_sgmii, CONFIG_SYS_MAXARGS, 1, pixis_set_sgmii, + "pixis_set_sgmii" + " - Enable or disable SGMII mode for a given TSEC \n", + "\npixis_set_sgmii [TSEC num] <on|off|switch>\n" + " TSEC num: 1,2,3,4 or 'all'. 'all' is default.\n" + " on - enables SGMII\n" + " off - disables SGMII\n" + " switch - use switch settings" +); #endif /* @@ -544,5 +546,5 @@ U_BOOT_CMD( " pixis_reset [altbank]\n" " pixis_reset altbank wd\n" " pixis_reset altbank cf <SYSCLK freq> <COREPLL ratio> <MPXPLL ratio>\n" - " pixis_reset cf <SYSCLK freq> <COREPLL ratio> <MPXPLL ratio>\n" - ); + " pixis_reset cf <SYSCLK freq> <COREPLL ratio> <MPXPLL ratio>" +); diff --git a/board/freescale/mpc8610hpcd/mpc8610hpcd_diu.c b/board/freescale/mpc8610hpcd/mpc8610hpcd_diu.c index 2b2d5d7ec27..0ad878c2934 100644 --- a/board/freescale/mpc8610hpcd/mpc8610hpcd_diu.c +++ b/board/freescale/mpc8610hpcd/mpc8610hpcd_diu.c @@ -140,8 +140,8 @@ U_BOOT_CMD( diufb, CONFIG_SYS_MAXARGS, 1, mpc8610diu_init_show_bmp, "Init or Display BMP file", "init\n - initialize DIU\n" - "addr\n - display bmp at address 'addr'\n" - ); + "addr\n - display bmp at address 'addr'" +); #if defined(CONFIG_VIDEO) || defined(CONFIG_CFB_CONSOLE) diff --git a/board/g2000/g2000.c b/board/g2000/g2000.c index b35038dc437..218f1bebf73 100644 --- a/board/g2000/g2000.c +++ b/board/g2000/g2000.c @@ -186,7 +186,7 @@ int do_dumpebc(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( dumpebc, 1, 1, do_dumpebc, "Dump all EBC registers", - NULL + "" ); @@ -208,7 +208,7 @@ int do_dumpdcr(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( dumpdcr, 1, 1, do_dumpdcr, "Dump all DCR registers", - NULL + "" ); @@ -272,6 +272,6 @@ int do_dumpspr(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( dumpspr, 1, 1, do_dumpspr, "Dump all SPR registers", - NULL + "" ); #endif diff --git a/board/hymod/bsp.c b/board/hymod/bsp.c index 092d3684402..262070fdff7 100644 --- a/board/hymod/bsp.c +++ b/board/hymod/bsp.c @@ -297,7 +297,7 @@ U_BOOT_CMD( "fpga info\n" " - print information about the Hymod FPGA, namely the\n" " memory addresses at which the four FPGA local bus\n" - " address spaces appear in the physical address space\n" + " address spaces appear in the physical address space" ); /* ------------------------------------------------------------------------- */ int @@ -340,7 +340,7 @@ U_BOOT_CMD( "[type]\n" " - write zeroes into the EEPROM on the board of type `type'\n" " (`type' is either `main' or `mezz' - default `main')\n" - " Note: the EEPROM write enable jumper must be installed\n" + " Note: the EEPROM write enable jumper must be installed" ); /* ------------------------------------------------------------------------- */ diff --git a/board/inka4x0/inkadiag.c b/board/inka4x0/inkadiag.c index 12c0a85d6ec..3761ef66d41 100644 --- a/board/inka4x0/inkadiag.c +++ b/board/inka4x0/inkadiag.c @@ -439,14 +439,14 @@ static int do_inkadiag_help(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); cmd_tbl_t cmd_inkadiag_sub[] = { U_BOOT_CMD_MKENT(io, 1, 1, do_inkadiag_io, "read digital input", - "<drawer1|drawer2|other> [value] - get or set specified signal\n"), + "<drawer1|drawer2|other> [value] - get or set specified signal"), U_BOOT_CMD_MKENT(serial, 4, 1, do_inkadiag_serial, "test serial port", "<num> <mode> <baudrate> <msg> - test uart num [0..11] in mode\n" - "and baudrate with msg\n"), + "and baudrate with msg"), U_BOOT_CMD_MKENT(buzzer, 2, 1, do_inkadiag_buzzer, "activate buzzer", - "<period> <freq> - turn buzzer on for period ms with freq hz\n"), + "<period> <freq> - turn buzzer on for period ms with freq hz"), U_BOOT_CMD_MKENT(help, 4, 1, do_inkadiag_help, "get help", - "[command] - get help for command\n"), + "[command] - get help for command"), }; static int do_inkadiag_help(cmd_tbl_t *cmdtp, int flag, @@ -483,7 +483,7 @@ U_BOOT_CMD(inkadiag, 6, 1, do_inkadiag, "inkadiag - inka diagnosis\n", "[inkadiag what ...]\n" " - perform a diagnosis on inka hardware\n" - "'inkadiag' performs hardware tests.\n\n"); + "'inkadiag' performs hardware tests."); /* Relocate the command table function pointers when running in RAM */ int inkadiag_init_r (void) { diff --git a/board/keymile/common/keymile_hdlc_enet.c b/board/keymile/common/keymile_hdlc_enet.c index 57978800f69..2e913adc55d 100644 --- a/board/keymile/common/keymile_hdlc_enet.c +++ b/board/keymile/common/keymile_hdlc_enet.c @@ -591,7 +591,7 @@ int hdlc_enet_stest(struct cmd_tbl_s *a, int b, int c, char **d) U_BOOT_CMD( stest, 1, 1, hdlc_enet_stest, "simple send test for hdlc_enet", - "no arguments\n" + "" ); /* simple receive test routine */ int hdlc_enet_rtest(struct cmd_tbl_s *a, int b, int c, char **d) @@ -613,7 +613,7 @@ int hdlc_enet_rtest(struct cmd_tbl_s *a, int b, int c, char **d) U_BOOT_CMD( rtest, 1, 1, hdlc_enet_rtest, "simple receive test for hdlc_enet", - "no arguments\n" + "" ); #endif diff --git a/board/lwmon/lwmon.c b/board/lwmon/lwmon.c index 1b665a91885..75b32090d19 100644 --- a/board/lwmon/lwmon.c +++ b/board/lwmon/lwmon.c @@ -853,7 +853,7 @@ U_BOOT_CMD( pic, 4, 1, do_pic, "read and write PIC registers", "read reg - read PIC register `reg'\n" - "pic write reg val - write value `val' to PIC register `reg'\n" + "pic write reg val - write value `val' to PIC register `reg'" ); /*********************************************************************** @@ -911,7 +911,7 @@ int do_kbd (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( kbd, 1, 1, do_kbd, "read keyboard status", - NULL + "" ); /* Read and set LSB switch */ @@ -985,7 +985,7 @@ U_BOOT_CMD( "check and set LSB switch", "on - switch LSB on\n" "lsb off - switch LSB off\n" - "lsb - print current setting\n" + "lsb - print current setting" ); #endif diff --git a/board/lwmon5/kbd.c b/board/lwmon5/kbd.c index bafd39c62ae..be1a1dfeb54 100644 --- a/board/lwmon5/kbd.c +++ b/board/lwmon5/kbd.c @@ -433,7 +433,7 @@ int do_kbd (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( kbd, 1, 1, do_kbd, "read keyboard status", - NULL + "" ); /*----------------------------- Utilities -----------------------------*/ diff --git a/board/lwmon5/lwmon5.c b/board/lwmon5/lwmon5.c index 4c04b984193..9b76e7663cc 100644 --- a/board/lwmon5/lwmon5.c +++ b/board/lwmon5/lwmon5.c @@ -487,7 +487,7 @@ int do_eeprom_wp(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( eepromwp, 2, 0, do_eeprom_wp, "eeprom write protect off/on", - "<on|off> - enable (on) or disable (off) I2C EEPROM write protect\n" + "<on|off> - enable (on) or disable (off) I2C EEPROM write protect" ); #if defined(CONFIG_VIDEO) diff --git a/board/micronas/vct/smc_eeprom.c b/board/micronas/vct/smc_eeprom.c index 2bc7ad4c4b2..6587f13e2f3 100644 --- a/board/micronas/vct/smc_eeprom.c +++ b/board/micronas/vct/smc_eeprom.c @@ -384,11 +384,11 @@ static int do_eeprom_save_mac(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[] } U_BOOT_CMD(smcee, 1, 0, do_eeprom_erase_all, - "smcee - Erase content of SMC EEPROM\n",); + "smcee - Erase content of SMC EEPROM",); U_BOOT_CMD(smced, 1, 0, do_eeprom_dump, - "smced - Dump content of SMC EEPROM\n",); + "smced - Dump content of SMC EEPROM",); U_BOOT_CMD(smcew, 2, 0, do_eeprom_save_mac, "smcew - Write MAC address to SMC EEPROM\n", - "aa:bb:cc:dd:ee:ff new mac address\n"); + "aa:bb:cc:dd:ee:ff new mac address"); diff --git a/board/mpl/mip405/cmd_mip405.c b/board/mpl/mip405/cmd_mip405.c index dc1380445a0..cd93a7ca0b0 100644 --- a/board/mpl/mip405/cmd_mip405.c +++ b/board/mpl/mip405/cmd_mip405.c @@ -60,7 +60,7 @@ U_BOOT_CMD( "mip405 flash mps - updates U-Boot with image from MPS\n" "mip405 info - displays board information\n" "mip405 led <on> - switches LED on (on=1) or off (on=0)\n" - "mip405 mem [cnt] - Memory Test <cnt>-times, <cnt> = -1 loop forever\n" + "mip405 mem [cnt] - Memory Test <cnt>-times, <cnt> = -1 loop forever" ); /* ------------------------------------------------------------------------- */ diff --git a/board/mpl/pati/cmd_pati.c b/board/mpl/pati/cmd_pati.c index 95bfdcc8c8e..0682323ae1f 100644 --- a/board/mpl/pati/cmd_pati.c +++ b/board/mpl/pati/cmd_pati.c @@ -443,7 +443,7 @@ U_BOOT_CMD( " era - erase PCI EEPROM (write all word to 0xffff)\n" " reload- Reload PCI Bridge with EEPROM Values\n" " NOTE: <addr> must start on word boundary\n" - " <offset> and <size> must be even byte values\n" + " <offset> and <size> must be even byte values" ); /* ------------------------------------------------------------------------- */ diff --git a/board/mpl/pip405/cmd_pip405.c b/board/mpl/pip405/cmd_pip405.c index ad5e0a1e189..6bbae89e5d4 100644 --- a/board/mpl/pip405/cmd_pip405.c +++ b/board/mpl/pip405/cmd_pip405.c @@ -63,7 +63,7 @@ U_BOOT_CMD( "PIP405 specific Cmds", "flash mem [SrcAddr] - updates U-Boot with image in memory\n" "pip405 flash floppy [SrcAddr] - updates U-Boot with image from floppy\n" - "pip405 flash mps - updates U-Boot with image from MPS\n" + "pip405 flash mps - updates U-Boot with image from MPS" ); /* ------------------------------------------------------------------------- */ diff --git a/board/mpl/vcma9/cmd_vcma9.c b/board/mpl/vcma9/cmd_vcma9.c index cbe7fe256e4..01607743952 100644 --- a/board/mpl/vcma9/cmd_vcma9.c +++ b/board/mpl/vcma9/cmd_vcma9.c @@ -174,5 +174,5 @@ int do_vcma9(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( vcma9, 6, 1, do_vcma9, "VCMA9 specific commands", - "flash mem [SrcAddr]\n - updates U-Boot with image in memory\n" + "flash mem [SrcAddr]\n - updates U-Boot with image in memory" ); diff --git a/board/pcippc2/pcippc2.c b/board/pcippc2/pcippc2.c index 80c2cb58e2d..7985f7d711b 100644 --- a/board/pcippc2/pcippc2.c +++ b/board/pcippc2/pcippc2.c @@ -239,7 +239,7 @@ U_BOOT_CMD( "check and set watchdog", "on - switch watchDog on\n" "wd off - switch watchdog off\n" - "wd - print current status\n" + "wd - print current status" ); #endif diff --git a/board/pcs440ep/pcs440ep.c b/board/pcs440ep/pcs440ep.c index 9cc3f5b6405..47d6391469a 100644 --- a/board/pcs440ep/pcs440ep.c +++ b/board/pcs440ep/pcs440ep.c @@ -763,7 +763,7 @@ U_BOOT_CMD( " 0x02 = DIAG 2 on\n" " 0x04 = DIAG 3 on\n" " 0x08 = DIAG 4 on\n" - " > 0x100 set the LED, who are on, to state blinking\n" + " > 0x100 set the LED, who are on, to state blinking" ); #if defined(CONFIG_SHA1_CHECK_UB_IMG) @@ -823,7 +823,7 @@ U_BOOT_CMD( "calculate the SHA1 Sum", "address len [addr] calculate the SHA1 sum [save at addr]\n" " -p calculate the SHA1 sum from the U-Boot image in flash and print\n" - " -c check the U-Boot image in flash\n" + " -c check the U-Boot image in flash" ); #endif diff --git a/board/pn62/cmd_pn62.c b/board/pn62/cmd_pn62.c index ff5d63ee121..a9893517224 100644 --- a/board/pn62/cmd_pn62.c +++ b/board/pn62/cmd_pn62.c @@ -54,8 +54,8 @@ int do_led (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( led , 3, 1, do_led, "set LED 0..11 on the PN62 board", - "i fun\n" - " - set 'i'th LED to function 'fun'\n" + "i fun" + " - set 'i'th LED to function 'fun'" ); /* @@ -177,7 +177,7 @@ U_BOOT_CMD( loadpci, 2, 1, do_loadpci, "load binary file over PCI", "[addr]\n" - " - load binary file over PCI to address 'addr'\n" + " - load binary file over PCI to address 'addr'" ); #endif diff --git a/board/prodrive/pdnb3/pdnb3.c b/board/prodrive/pdnb3/pdnb3.c index 877728403fd..c323456d607 100644 --- a/board/prodrive/pdnb3/pdnb3.c +++ b/board/prodrive/pdnb3/pdnb3.c @@ -228,7 +228,7 @@ int do_fpga(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( fpga, 2, 0, do_fpga, "boot FPGA", - "address size\n - boot FPGA with gzipped image at <address>\n" + "address size\n - boot FPGA with gzipped image at <address>" ); #if defined(CONFIG_CMD_PCI) || defined(CONFIG_PCI) diff --git a/board/pxa255_idp/pxa_idp.c b/board/pxa255_idp/pxa_idp.c index aa598aaa44d..e9e479c4bad 100644 --- a/board/pxa255_idp/pxa_idp.c +++ b/board/pxa255_idp/pxa_idp.c @@ -129,7 +129,7 @@ int do_idpcmd(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD(idpcmd, CONFIG_SYS_MAXARGS, 0, do_idpcmd, "custom IDP command", - "no args at this time\n" + "no args at this time" ); #endif diff --git a/board/r360mpi/r360mpi.c b/board/r360mpi/r360mpi.c index 1871984a699..703af73aadf 100644 --- a/board/r360mpi/r360mpi.c +++ b/board/r360mpi/r360mpi.c @@ -415,5 +415,5 @@ int do_kbd (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( kbd, 1, 1, do_kbd, "read keyboard status", - NULL + "" ); diff --git a/board/renesas/sh7785lcr/rtl8169_mac.c b/board/renesas/sh7785lcr/rtl8169_mac.c index 6d0bbc0c2f0..634efb42a86 100644 --- a/board/renesas/sh7785lcr/rtl8169_mac.c +++ b/board/renesas/sh7785lcr/rtl8169_mac.c @@ -325,7 +325,7 @@ U_BOOT_CMD( setmac, 2, 1, do_set_mac, "write MAC address for RTL8110SCL", "\n" - "setmac <mac address> - write MAC address for RTL8110SCL\n" + "setmac <mac address> - write MAC address for RTL8110SCL" ); int do_print_mac(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) @@ -344,5 +344,5 @@ U_BOOT_CMD( printmac, 1, 1, do_print_mac, "print MAC address for RTL8110", "\n" - " - print MAC address for RTL8110\n" + " - print MAC address for RTL8110" ); diff --git a/board/renesas/sh7785lcr/selfcheck.c b/board/renesas/sh7785lcr/selfcheck.c index 6dbb7842e45..e803b3c9c14 100644 --- a/board/renesas/sh7785lcr/selfcheck.c +++ b/board/renesas/sh7785lcr/selfcheck.c @@ -168,5 +168,5 @@ U_BOOT_CMD( "hwtest sm107 - output SM107 version\n" "hwtest net - check RTL8110 ID\n" "hwtest sata - check SiI3512 ID\n" - "hwtest pci - output PCI slot device ID\n" + "hwtest pci - output PCI slot device ID" ); diff --git a/board/renesas/sh7785lcr/sh7785lcr.c b/board/renesas/sh7785lcr/sh7785lcr.c index 6bdf3c067a9..9948d04eae4 100644 --- a/board/renesas/sh7785lcr/sh7785lcr.c +++ b/board/renesas/sh7785lcr/sh7785lcr.c @@ -82,6 +82,6 @@ U_BOOT_CMD( pmb, 1, 1, do_pmb, "pmb - PMB setting\n", "\n" - " - PMB setting for all SDRAM mapping\n" + " - PMB setting for all SDRAM mapping" ); #endif diff --git a/board/sandburst/common/ppc440gx_i2c.c b/board/sandburst/common/ppc440gx_i2c.c index c1af70ceab3..bc88e5a7eb3 100644 --- a/board/sandburst/common/ppc440gx_i2c.c +++ b/board/sandburst/common/ppc440gx_i2c.c @@ -501,7 +501,7 @@ int do_i2c1_probe(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( iprobe1, 1, 1, do_i2c1_probe, "probe to discover valid I2C chip addresses", - "\n -discover valid I2C chip addresses\n" + "" ); #endif /* CONFIG_I2C_BUS1 */ diff --git a/board/sandburst/karef/karef.c b/board/sandburst/karef/karef.c index b8ae68fcd61..92f52475652 100644 --- a/board/sandburst/karef/karef.c +++ b/board/sandburst/karef/karef.c @@ -611,7 +611,7 @@ int karefRecover(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD(kasetup, 1, 1, karefSetupVars, - "Set environment to factory defaults", NULL); + "Set environment to factory defaults", ""); U_BOOT_CMD(karecover, 1, 1, karefRecover, - "Set environment to allow for fs recovery", NULL); + "Set environment to allow for fs recovery", ""); diff --git a/board/sandburst/metrobox/metrobox.c b/board/sandburst/metrobox/metrobox.c index fc136c89c40..27d7f74088b 100644 --- a/board/sandburst/metrobox/metrobox.c +++ b/board/sandburst/metrobox/metrobox.c @@ -577,7 +577,7 @@ int metroboxRecover(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD(mbsetup, 1, 1, metroboxSetupVars, - "Set environment to factory defaults", NULL); + "Set environment to factory defaults", ""); U_BOOT_CMD(mbrecover, 1, 1, metroboxRecover, - "Set environment to allow for fs recovery", NULL); + "Set environment to allow for fs recovery", ""); diff --git a/board/siemens/common/fpga.c b/board/siemens/common/fpga.c index c9a93e15892..4b45902aa26 100644 --- a/board/siemens/common/fpga.c +++ b/board/siemens/common/fpga.c @@ -295,7 +295,7 @@ U_BOOT_CMD( "access FPGA(s)", "fpga status [name] - print FPGA status\n" "fpga reset [name] - reset FPGA\n" - "fpga load [name] addr - load FPGA configuration data\n" + "fpga load [name] addr - load FPGA configuration data" ); #endif diff --git a/board/siemens/pcu_e/pcu_e.c b/board/siemens/pcu_e/pcu_e.c index f87d6bc00f1..827578c3a97 100644 --- a/board/siemens/pcu_e/pcu_e.c +++ b/board/siemens/pcu_e/pcu_e.c @@ -404,10 +404,10 @@ int do_puma (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD (puma, 4, 1, do_puma, - "access PUMA FPGA", - "status - print PUMA status\n" - "puma load addr len - load PUMA configuration data\n"); - + "access PUMA FPGA", + "status - print PUMA status\n" + "puma load addr len - load PUMA configuration data" +); #endif /* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . */ diff --git a/board/ssv/common/cmd_sled.c b/board/ssv/common/cmd_sled.c index 99ff5076084..449c1a49949 100644 --- a/board/ssv/common/cmd_sled.c +++ b/board/ssv/common/cmd_sled.c @@ -157,6 +157,6 @@ int do_sled (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD (sled, 3, 0, do_sled, "check and set status led", - "sled [name [state]]\n" __NAME_STR " - state: on|off|blink\n"); + "sled [name [state]]\n" __NAME_STR " - state: on|off|blink"); #endif #endif /* CONFIG_STATUS_LED */ diff --git a/board/ssv/common/wd_pio.c b/board/ssv/common/wd_pio.c index 9b384259e4b..eaf1d2526c9 100644 --- a/board/ssv/common/wd_pio.c +++ b/board/ssv/common/wd_pio.c @@ -154,7 +154,7 @@ U_BOOT_CMD( "check and set watchdog", "on - switch watchDog on\n" "wd off - switch watchdog off\n" - "wd - print current status\n" + "wd - print current status" ); #endif #endif /* CONFIG_HW_WATCHDOG */ diff --git a/board/tqc/tqm5200/cmd_stk52xx.c b/board/tqc/tqm5200/cmd_stk52xx.c index 20632a7f1eb..e309beb1dc7 100644 --- a/board/tqc/tqm5200/cmd_stk52xx.c +++ b/board/tqc/tqm5200/cmd_stk52xx.c @@ -1201,21 +1201,21 @@ U_BOOT_CMD( "sound square [duration] [freq] [channel]\n" " - generate squarewave for 'duration' ms with frequency 'freq'\n" " on left \"l\" or right \"r\" channel\n" - "pcm1772 reg val\n" + "pcm1772 reg val" ); U_BOOT_CMD( wav , 3, 1, cmd_wav, "play wav file", "[addr] [bytes]\n" - " - play wav file at address 'addr' with length 'bytes'\n" + " - play wav file at address 'addr' with length 'bytes'" ); U_BOOT_CMD( beep , 2, 1, cmd_beep, "play short beep", "[channel]\n" - " - play short beep on \"l\"eft or \"r\"ight channel\n" + " - play short beep on \"l\"eft or \"r\"ight channel" ); #endif /* CONFIG_STK52XX || CONFIG_FO300 */ @@ -1228,10 +1228,11 @@ U_BOOT_CMD( "fkt can\n" " - loopback plug for X83 required\n" "fkt rs232 number\n" - " - loopback plug(s) for X2 required\n" + " - loopback plug(s) for X2 required" #ifndef CONFIG_TQM5200S + "\n" "fkt backlight on/off\n" - " - switch backlight on or off\n" + " - switch backlight on or off" #endif /* !CONFIG_TQM5200S */ ); #elif defined(CONFIG_FO300) @@ -1241,7 +1242,7 @@ U_BOOT_CMD( "fkt can\n" " - loopback plug for X16/X29 required\n" "fkt rs232 number\n" - " - loopback plug(s) for X21/X22 required\n" + " - loopback plug(s) for X21/X22 required" ); #endif #endif diff --git a/board/tqc/tqm5200/cmd_tb5200.c b/board/tqc/tqm5200/cmd_tb5200.c index b9c9e7e194e..578e716e7a4 100644 --- a/board/tqc/tqm5200/cmd_tb5200.c +++ b/board/tqc/tqm5200/cmd_tb5200.c @@ -91,13 +91,13 @@ int cmd_backlight(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( led , 2, 1, cmd_led, "switch status LED on or off", - "on/off\n" + "on/off" ); U_BOOT_CMD( backlight , 2, 1, cmd_backlight, "switch backlight on or off", - "on/off\n" + "on/off" ); #endif /* CONFIG_STK52XX */ diff --git a/board/tqc/tqm8272/tqm8272.c b/board/tqc/tqm8272/tqm8272.c index 5bc080ff81e..92f74a39cca 100644 --- a/board/tqc/tqm8272/tqm8272.c +++ b/board/tqc/tqm8272/tqm8272.c @@ -867,7 +867,7 @@ int do_hwib_dump (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( hwib, 1, 1, do_hwib_dump, "dump HWIB'", - "\n" + "" ); #ifdef CONFIG_SYS_UPDATE_FLASH_SIZE diff --git a/board/trab/cmd_trab.c b/board/trab/cmd_trab.c index 7e2a6723480..d0465fb7e6f 100644 --- a/board/trab/cmd_trab.c +++ b/board/trab/cmd_trab.c @@ -262,7 +262,7 @@ U_BOOT_CMD( "\n" " - start burn-in test application\n" " The burn-in test could took a while to finish!\n" - " The content of the onboard EEPROM is modified!\n" + " The content of the onboard EEPROM is modified!" ); @@ -295,7 +295,7 @@ U_BOOT_CMD( "read dip switch on TRAB", "\n" " - read state of dip switch (S1) on TRAB board\n" - " read sequence: 1-2-3-4; ON=1; OFF=0; e.g.: \"0100\"\n" + " read sequence: 1-2-3-4; ON=1; OFF=0; e.g.: \"0100\"" ); @@ -323,7 +323,7 @@ U_BOOT_CMD( vcc5v, 1, 1, do_vcc5v, "read VCC5V on TRAB", "\n" - " - read actual value of voltage VCC5V\n" + " - read actual value of voltage VCC5V" ); @@ -347,7 +347,7 @@ int do_contact_temp (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( c_temp, 1, 1, do_contact_temp, "read contact temperature on TRAB", - "\n" + "" " - reads the onboard temperature (=contact temperature)\n" ); @@ -401,7 +401,7 @@ U_BOOT_CMD( "print burn in status on TRAB", "\n" " - prints the status variables of the last burn in test\n" - " stored in the onboard EEPROM on TRAB board\n" + " stored in the onboard EEPROM on TRAB board" ); static int read_dip (void) @@ -890,7 +890,7 @@ U_BOOT_CMD( "delay\n" " - contact temperature [1/100 C] is printed endlessly to console\n" " <delay> specifies the seconds to wait between two measurements\n" - " For each measurment a timestamp is printeted\n" + " For each measurment a timestamp is printeted" ); #endif diff --git a/board/trab/trab.c b/board/trab/trab.c index 53590650f13..ddf6abf7b4c 100644 --- a/board/trab/trab.c +++ b/board/trab/trab.c @@ -323,7 +323,7 @@ int do_kbd (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( kbd, 1, 1, do_kbd, "read keyboard status", - NULL + "" ); #ifdef CONFIG_MODEM_SUPPORT diff --git a/board/trizepsiv/eeprom.c b/board/trizepsiv/eeprom.c index 9fa7aef9a29..b6b16bf680b 100644 --- a/board/trizepsiv/eeprom.c +++ b/board/trizepsiv/eeprom.c @@ -81,4 +81,5 @@ U_BOOT_CMD( "\tdm9000ee read \n" "\tword:\t\t00-02 : MAC Address\n" "\t\t\t03-07 : DM9000 Configuration\n" - "\t\t\t08-63 : User data\n"); + "\t\t\t08-63 : User data" +); diff --git a/board/w7o/cmd_vpd.c b/board/w7o/cmd_vpd.c index eaec940e679..013fc791f27 100644 --- a/board/w7o/cmd_vpd.c +++ b/board/w7o/cmd_vpd.c @@ -60,7 +60,7 @@ U_BOOT_CMD( vpd, 2, 1, do_vpd, "Read Vital Product Data", "[dev_addr]\n" - " - Read VPD Data from default address, or device address 'dev_addr'.\n" + " - Read VPD Data from default address, or device address 'dev_addr'." ); #endif diff --git a/board/zeus/update.c b/board/zeus/update.c index ce1f34fee2b..c8487e58f8a 100644 --- a/board/zeus/update.c +++ b/board/zeus/update.c @@ -99,7 +99,7 @@ int do_update_boot_eeprom(cmd_tbl_t* cmdtp, int flag, int argc, char* argv[]) U_BOOT_CMD ( update_boot_eeprom, 1, 1, do_update_boot_eeprom, "update boot eeprom content", - NULL + "" ); #endif diff --git a/board/zeus/zeus.c b/board/zeus/zeus.c index 3f329c2fc99..9bc390f8379 100644 --- a/board/zeus/zeus.c +++ b/board/zeus/zeus.c @@ -328,7 +328,7 @@ int do_set_default(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( setdef, 4, 1, do_set_default, "write board-specific values to EEPROM (ethaddr...)", - "ethaddr eth1addr serial#\n - write board-specific values to EEPROM\n" + "ethaddr eth1addr serial#\n - write board-specific values to EEPROM" ); static inline int sw_reset_pressed(void) @@ -419,7 +419,7 @@ int do_chkreset(cmd_tbl_t* cmdtp, int flag, int argc, char* argv[]) U_BOOT_CMD ( chkreset, 1, 1, do_chkreset, "Check for status of SW-reset button and act accordingly", - NULL + "" ); #if defined(CONFIG_POST) |