diff options
Diffstat (limited to 'board')
35 files changed, 3480 insertions, 600 deletions
diff --git a/board/freescale/imx8mm_evk/README b/board/freescale/imx8mm_evk/README deleted file mode 100644 index fa3f079f31c..00000000000 --- a/board/freescale/imx8mm_evk/README +++ /dev/null @@ -1,37 +0,0 @@ -U-Boot for the NXP i.MX8MM EVK board - -Quick Start -=========== -- Build the ARM Trusted firmware binary -- Get ddr firmware -- Build U-Boot -- Boot - -Get and Build the ARM Trusted firmware -====================================== -Note: builddir is U-Boot build directory (source directory for in-tree builds) -Get ATF from: https://source.codeaurora.org/external/imx/imx-atf -branch: imx_4.19.35_1.0.0 -$ make PLAT=imx8mm bl31 -$ cp build/imx8mm/release/bl31.bin $(builddir) - -Get the ddr firmware -============================= -$ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.0.bin -$ chmod +x firmware-imx-8.0.bin -$ ./firmware-imx-8.0 -$ cp firmware-imx-8.0/firmware/ddr/synopsys/lpddr4*.bin $(builddir) - -Build U-Boot -============ -$ export CROSS_COMPILE=aarch64-poky-linux- -$ make imx8mm_evk_defconfig -$ export ATF_LOAD_ADDR=0x920000 -$ make flash.bin - -Burn the flash.bin to MicroSD card offset 33KB -$sudo dd if=flash.bin of=/dev/sd[x] bs=1024 seek=33 - -Boot -==== -Set Boot switch to SD boot diff --git a/board/freescale/imx8mn_evk/README b/board/freescale/imx8mn_evk/README deleted file mode 100644 index ff3d15c02b7..00000000000 --- a/board/freescale/imx8mn_evk/README +++ /dev/null @@ -1,37 +0,0 @@ -U-Boot for the NXP i.MX8MN EVK board - -Quick Start -=========== -- Build the ARM Trusted firmware binary -- Get firmware-imx package -- Build U-Boot -- Boot - -Get and Build the ARM Trusted firmware -====================================== -Note: srctree is U-Boot source directory -Get ATF from: https://source.codeaurora.org/external/imx/imx-atf -branch: imx_4.19.35_1.1.0 -$ make PLAT=imx8mn bl31 -$ cp build/imx8mn/release/bl31.bin $(srctree) - -Get the ddr firmware -============================= -$ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.5.bin -$ chmod +x firmware-imx-8.5.bin -$ ./firmware-imx-8.5 -$ cp firmware-imx-8.5/firmware/ddr/synopsys/ddr4*.bin $(srctree) - -Build U-Boot -============ -$ export CROSS_COMPILE=aarch64-poky-linux- -$ make imx8mn_ddr4_evk_defconfig -$ export ATF_LOAD_ADDR=0x960000 -$ make flash.bin - -Burn the flash.bin to MicroSD card offset 32KB -$sudo dd if=flash.bin of=/dev/sd[x] bs=1024 seek=32 - -Boot -==== -Set Boot switch to SD boot diff --git a/board/freescale/imx8mp_evk/README b/board/freescale/imx8mp_evk/README deleted file mode 100644 index 7dd3a9352a5..00000000000 --- a/board/freescale/imx8mp_evk/README +++ /dev/null @@ -1,41 +0,0 @@ -U-Boot for the NXP i.MX8MP EVK board - -Quick Start -=========== -- Build the ARM Trusted firmware binary -- Get the firmware-imx package -- Build U-Boot -- Boot - -Get and Build the ARM Trusted firmware -====================================== -Note: $(srctree) is the U-Boot source directory -Get ATF from: https://source.codeaurora.org/external/imx/imx-atf -branch: imx_5.4.3_2.0.0 -$ make PLAT=imx8mp bl31 -$ sudo cp build/imx8mp/release/bl31.bin $(srctree) - -Get the ddr firmware -==================== -$ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.7.bin -$ chmod +x firmware-imx-8.7.bin -$ ./firmware-imx-8.7 -$ sudo cp firmware-imx-8.7/firmware/ddr/synopsys/lpddr4_pmu_train_1d_dmem_201904.bin $(srctree)/lpddr4_pmu_train_1d_dmem.bin -$ sudo cp firmware-imx-8.7/firmware/ddr/synopsys/lpddr4_pmu_train_1d_imem_201904.bin $(srctree)/lpddr4_pmu_train_1d_imem.bin -$ sudo cp firmware-imx-8.7/firmware/ddr/synopsys/lpddr4_pmu_train_2d_dmem_201904.bin $(srctree)/lpddr4_pmu_train_2d_dmem.bin -$ sudo cp firmware-imx-8.7/firmware/ddr/synopsys/lpddr4_pmu_train_2d_imem_201904.bin $(srctree)/lpddr4_pmu_train_2d_imem.bin - -Build U-Boot -============ -$ export CROSS_COMPILE=aarch64-poky-linux- -$ make imx8mp_evk_defconfig -$ export ATF_LOAD_ADDR=0x960000 -$ make flash.bin - -Burn the flash.bin to the MicroSD card at offset 32KB -$sudo dd if=flash.bin of=/dev/sd[x] bs=1K seek=32; sync - -Boot -==== -Set Boot switch to SD boot -Use /dev/ttyUSB2 for U-Boot console diff --git a/board/freescale/imx8mq_evk/README b/board/freescale/imx8mq_evk/README deleted file mode 100644 index 859f852255e..00000000000 --- a/board/freescale/imx8mq_evk/README +++ /dev/null @@ -1,37 +0,0 @@ -U-Boot for the NXP i.MX8MQ EVK board - -Quick Start -=========== -- Build the ARM Trusted firmware binary -- Get ddr and hdmi fimware -- Build U-Boot -- Boot - -Get and Build the ARM Trusted firmware -====================================== -Note: srctree is U-Boot source directory -Get ATF from: https://source.codeaurora.org/external/imx/imx-atf -branch: imx_4.19.35_1.0.0 -$ make PLAT=imx8mq bl31 -$ cp build/imx8mq/release/bl31.bin $(builddir) - -Get the ddr and hdmi firmware -============================= -$ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-7.9.bin -$ chmod +x firmware-imx-7.9.bin -$ ./firmware-imx-7.9.bin -$ cp firmware-imx-7.9/firmware/hdmi/cadence/signed_hdmi_imx8m.bin $(builddir) -$ cp firmware-imx-7.9/firmware/ddr/synopsys/lpddr4*.bin $(builddir) - -Build U-Boot -============ -$ export CROSS_COMPILE=aarch64-poky-linux- -$ make imx8mq_evk_defconfig -$ make flash.bin - -Burn the flash.bin to MicroSD card offset 33KB -$sudo dd if=flash.bin of=/dev/sd[x] bs=1024 seek=33 - -Boot -==== -Set Boot switch SW801: 1100 and Bmode: 10 to boot from Micro SD. diff --git a/board/freescale/imx8qxp_mek/README b/board/freescale/imx8qxp_mek/README deleted file mode 100644 index 6e4eb5996b0..00000000000 --- a/board/freescale/imx8qxp_mek/README +++ /dev/null @@ -1,50 +0,0 @@ -U-Boot for the NXP i.MX8QXP EVK board - -Quick Start -=========== - -- Build the ARM Trusted firmware binary -- Get scfw_tcm.bin and ahab-container.img -- Build U-Boot -- Flash the binary into the SD card -- Boot - -Get and Build the ARM Trusted firmware -====================================== - -$ git clone https://source.codeaurora.org/external/imx/imx-atf -$ cd imx-atf/ -$ git checkout origin/imx_4.19.35_1.1.0 -b imx_4.19.35_1.1.0 -$ make PLAT=imx8qx bl31 - -Get scfw_tcm.bin and ahab-container.img -============================== - -$ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/imx-sc-firmware-1.2.7.1.bin -$ chmod +x imx-sc-firmware-1.2.7.1.bin -$ ./imx-sc-firmware-1.2.7.1.bin -$ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/imx-seco-2.3.1.bin -$ chmod +x imx-seco-2.3.1.bin -$ ./imx-seco-2.3.1.bin - -Copy the following binaries to U-Boot folder: - -$ cp imx-atf/build/imx8qx/release/bl31.bin . -$ cp imx-seco-2.3.1/firmware/seco/mx8qx-ahab-container.img ./ahab-container.img -$ cp imx-sc-firmware-1.2.7.1/mx8qx-mek-scfw-tcm.bin . - -Build U-Boot -============ -$ make imx8qxp_mek_defconfig -$ make flash.bin - -Flash the binary into the SD card -================================= - -Burn the flash.bin binary to SD card offset 32KB: - -$ sudo dd if=flash.bin of=/dev/sd[x] bs=1024 seek=32 - -Boot -==== -Set Boot switch SW2: 1100. diff --git a/board/freescale/imxrt1020-evk/README b/board/freescale/imxrt1020-evk/README deleted file mode 100644 index abee7ca5f3d..00000000000 --- a/board/freescale/imxrt1020-evk/README +++ /dev/null @@ -1,31 +0,0 @@ -How to use U-Boot on NXP i.MXRT1020 EVK ------------------------------------------------ - -- Build U-Boot for i.MXRT1020 EVK: - -$ make mrproper -$ make imxrt1020-evk_defconfig -$ make - -This will generate the SPL image called SPL and the u-boot.img. - -- Flash the SPL image into the micro SD card: - -sudo dd if=SPL of=/dev/sdX bs=1k seek=1; sync - -- Flash the u-boot.img image into the micro SD card: - -sudo dd if=u-boot.img of=/dev/sdX bs=1k seek=128; sync - -- Jumper settings: - -SW8: 0 1 1 0 - -where 0 means bottom position and 1 means top position (from the -switch label numbers reference). - -- Connect the USB cable between the EVK and the PC for the console. -(The USB console connector is the one close the ethernet connector) - -- Insert the micro SD card in the board, power it up and U-Boot messages should -come up. diff --git a/board/freescale/imxrt1050-evk/README b/board/freescale/imxrt1050-evk/README deleted file mode 100644 index a7e68fa9b32..00000000000 --- a/board/freescale/imxrt1050-evk/README +++ /dev/null @@ -1,31 +0,0 @@ -How to use U-Boot on NXP i.MXRT1050 EVK ------------------------------------------------ - -- Build U-Boot for i.MXRT1050 EVK: - -$ make mrproper -$ make imxrt1050-evk_defconfig -$ make - -This will generate the SPL image called SPL and the u-boot.img. - -- Flash the SPL image into the micro SD card: - -sudo dd if=SPL of=/dev/sdX bs=1k seek=1; sync - -- Flash the u-boot.img image into the micro SD card: - -sudo dd if=u-boot.img of=/dev/sdX bs=1k seek=128; sync - -- Jumper settings: - -SW7: 1 0 1 0 - -where 0 means bottom position and 1 means top position (from the -switch label numbers reference). - -- Connect the USB cable between the EVK and the PC for the console. -(The USB console connector is the one close the ethernet connector) - -- Insert the micro SD card in the board, power it up and U-Boot messages should -come up. diff --git a/board/freescale/mx6sabreauto/README b/board/freescale/mx6sabreauto/README deleted file mode 100644 index 4c0fda1a2de..00000000000 --- a/board/freescale/mx6sabreauto/README +++ /dev/null @@ -1,82 +0,0 @@ -How to use and build U-Boot on mx6sabreauto -------------------------------------------- - -mx6sabreauto_defconfig target supports mx6q/mx6dl/mx6qp sabreauto variants. - -In order to build it: - -$ make mx6sabreauto_defconfig - -$ make - -This will generate the SPL and u-boot-dtb.img binaries. - -- Flash the SPL binary into the SD card: - -$ sudo dd if=SPL of=/dev/sdX bs=1K seek=1 && sync - -- Flash the u-boot-dtb.img binary into the SD card: - -$ sudo dd if=u-boot-dtb.img of=/dev/sdX bs=1K seek=69 && sync - -Booting via Falcon mode ------------------------ - -Write in mx6sabreauto_defconfig the following define below: - -CONFIG_SPL_OS_BOOT=y - -In order to build it: - -$ make mx6sabreauto_defconfig - -$ make - -This will generate the SPL image called SPL and the u-boot-dtb.img. - -- Flash the SPL image into the SD card: - -$ sudo dd if=SPL of=/dev/sdb bs=1K seek=1 && sync - -- Flash the u-boot-dtb.img image into the SD card: - -$ sudo dd if=u-boot-dtb.img of=/dev/sdb bs=1K seek=69 && sync - -Create a FAT16 boot partition to store uImage and the dtb file, then copy the files there: - -$ sudo cp uImage /media/boot - -$ sudo cp imx6dl-sabreauto.dtb /media/boot - -Create a partition for root file system and extract it there: - -$ sudo tar xvf rootfs.tar.gz -C /media/root - -The SD card must have enough space for raw "args" and "kernel". -To configure Falcon mode for the first time, on U-Boot do the following commands: - -- Load dtb file from boot partition: - -# load mmc 0:1 ${fdt_addr} imx6dl-sabreauto.dtb - -- Load kernel image from boot partition: - -# load mmc 0:1 ${loadaddr} uImage - -- Write kernel at 2MB offset: - -# mmc write ${loadaddr} 0x1000 0x4000 - -- Setup kernel bootargs: - -# setenv bootargs "console=ttymxc3,115200 root=/dev/mmcblk0p1 rootfstype=ext4 rootwait quiet rw" - -- Prepare args: - -# spl export fdt ${loadaddr} - ${fdt_addr} - -- Write args 1MB data (0x800 sectors) to 1MB offset (0x800 sectors) - -# mmc write 18000000 0x800 0x800 - -- Restart the board and then SPL binary will launch the kernel directly. diff --git a/board/freescale/mx6sabresd/README b/board/freescale/mx6sabresd/README deleted file mode 100644 index 4ea4454b9f9..00000000000 --- a/board/freescale/mx6sabresd/README +++ /dev/null @@ -1,114 +0,0 @@ -How to use and build U-Boot on mx6sabresd ------------------------------------------ - -The following methods can be used for booting mx6sabresd boards: - -1. Booting from SD card - -2. Booting from eMMC - -3. Booting via Falcon mode (SPL launches the kernel directly) - - -1. Booting from SD card via SPL -------------------------------- - -mx6sabresd_defconfig target supports mx6q/mx6dl/mx6qp sabresd variants. - -In order to build it: - -$ make mx6sabresd_defconfig - -$ make - -This will generate the SPL and u-boot-dtb.img binaries. - -- Flash the SPL binary into the SD card: - -$ sudo dd if=SPL of=/dev/sdX bs=1K seek=1 && sync - -- Flash the u-boot-dtb.img binary into the SD card: - -$ sudo dd if=u-boot-dtb.img of=/dev/sdX bs=1K seek=69 && sync - - -2. Booting from eMMC --------------------- - -$ make mx6sabresd_defconfig - -$ make - -This will generate the SPL and u-boot-dtb.img binaries. - -- Boot first from SD card as shown in the previous section - -In U-boot change the eMMC partition config: - -=> mmc partconf 2 1 0 0 - -Mount the eMMC in the host PC: - -=> ums 0 mmc 2 - -- Flash SPL and u-boot-dtb.img binaries into the eMMC: - -$ sudo dd if=SPL of=/dev/sdX bs=1K seek=1 && sync -$ sudo dd if=u-boot-dtb.img of=/dev/sdX bs=1K seek=69 && sync - -Set SW6 to eMMC 8-bit boot: 11010110 - - -3. Booting via Falcon mode --------------------------- - -$ make mx6sabresd_defconfig -$ make - -This will generate the SPL image called SPL and the u-boot-dtb.img. - -- Flash the SPL image into the SD card: - -$ sudo dd if=SPL of=/dev/sdX bs=1K seek=1 oflag=sync status=none && sync - -- Flash the u-boot-dtb.img image into the SD card: - -$ sudo dd if=u-boot-dtb.img of=/dev/sdX bs=1K seek=69 oflag=sync status=none && sync - -Create a partition for root file system and extract it there: - -$ sudo tar xvf rootfs.tar.gz -C /media/root - -The SD card must have enough space for raw "args" and "kernel". -To configure Falcon mode for the first time, on U-Boot do the following commands: - -- Setup the IP server: - -# setenv serverip <server_ip_address> - -- Download dtb file: - -# dhcp ${fdt_addr} imx6q-sabresd.dtb - -- Download kernel image: - -# dhcp ${loadaddr} uImage - -- Write kernel at 2MB offset: - -# mmc write ${loadaddr} 0x1000 0x4000 - -- Setup kernel bootargs: - -# setenv bootargs "console=ttymxc0,115200 root=/dev/mmcblk1p1 rootfstype=ext4 rootwait quiet rw" - -- Prepare args: - -# spl export fdt ${loadaddr} - ${fdt_addr} - -- Write args 1MB data (0x800 sectors) to 1MB offset (0x800 sectors) - -# mmc write 18000000 0x800 0x800 - -- Press KEY_VOL_UP key, power up the board and then SPL binary will -launch the kernel directly. diff --git a/board/freescale/mx6ul_14x14_evk/README b/board/freescale/mx6ul_14x14_evk/README deleted file mode 100644 index e101abe48c7..00000000000 --- a/board/freescale/mx6ul_14x14_evk/README +++ /dev/null @@ -1,82 +0,0 @@ -How to use U-Boot on Freescale MX6UL 14x14 EVK ------------------------------------------------ - -- Build U-Boot for MX6UL 14x14 EVK: - -$ make mrproper -$ make mx6ul_14x14_evk_defconfig -$ make - -This will generate the SPL image called SPL and the u-boot.img. - -1. Booting via SDCard ---------------------- - -- Flash the SPL image into the micro SD card: - -sudo dd if=SPL of=/dev/mmcblk0 bs=1k seek=1; sync - -- Flash the u-boot.img image into the micro SD card: - -sudo dd if=u-boot.img of=/dev/mmcblk0 bs=1k seek=69; sync - -- Jumper settings: - -SW601: 0 0 1 0 -Sw602: 1 0 - -where 0 means bottom position and 1 means top position (from the -switch label numbers reference). - -- Connect the USB cable between the EVK and the PC for the console. -(The USB console connector is the one close the push buttons) - -- Insert the micro SD card in the board, power it up and U-Boot messages should -come up. - -2. Booting via Serial Download Protocol (SDP) ---------------------------------------------- - -The mx6ulevk board can boot from USB OTG port using the SDP, target will -enter in SDP mode in case an SD Card is not connect or boot switches are -set as below: - -Sw602: 0 1 -SW601: x x x x - -The following tools can be used to boot via SDP, for both tools you must -connect an USB cable in USB OTG port. - -- Method 1: Universal Update Utility (uuu) - -The UUU binary can be downloaded in release tab from link below: -https://github.com/NXPmicro/mfgtools - -The following script should be created to boot SPL + u-boot-dtb.img binaries: - - $ cat uuu_script - uuu_version 1.1.4 - - SDP: boot -f SPL - SDPU: write -f u-boot-dtb.img -addr 0x877fffc0 - SDPU: jump -addr 0x877fffc0 - SDPU: done - -Please note that the address above is calculated based on SYS_TEXT_BASE address: - -0x877fffc0 = 0x87800000 (SYS_TEXT_BASE) - 0x40 (U-Boot proper Header size) - -Power on the target and run the following command from U-Boot root directory: - - $ sudo ./uuu uuu_script - -- Method 2: imx usb loader tool (imx_usb): - -The imx_usb_loader tool can be downloaded in link below: -https://github.com/boundarydevices/imx_usb_loader - -Build the source code and run the following commands from U-Boot root -directory: - - $ sudo ./imx_usb SPL - $ sudo ./imx_usb u-boot-dtb.img diff --git a/board/freescale/mx6ullevk/README b/board/freescale/mx6ullevk/README deleted file mode 100644 index d5c87708630..00000000000 --- a/board/freescale/mx6ullevk/README +++ /dev/null @@ -1,36 +0,0 @@ -How to use U-Boot on Freescale MX6ULL 14x14 EVK ----------------------------------------------- - -- First make sure you have installed the dtc package (device tree compiler): - -$ sudo apt-get install device-tree-compiler - -- Build U-Boot for MX6ULL 14x14 EVK: - -$ make mrproper -$ make mx6ull_14x14_evk_defconfig -$ make - -This generates the u-boot-dtb.imx image in the current directory. - -- Flash the u-boot-dtb.imx image into the micro SD card: - -$ sudo dd if=u-boot-dtb.imx of=/dev/sdb bs=1K seek=1 && sync - -- Jumper settings: - -SW601: 0 0 1 0 -Sw602: 1 0 - -Where 0 means bottom position and 1 means top position (from the switch label -numbers reference). - -Connect the USB cable between the EVK and the PC for the console. -(The USB console connector is the one close the push buttons) - -Insert the micro SD card in the board, power it up and U-Boot messages should -come up. - -The link for the board: http://www.nxp.com/products/microcontrollers-and- \ -processors/arm-processors/i.mx-applications-processors/i.mx-6-processors/ \ -i.mx6qp/evaluation-kit-for-the-i.mx-6ull-applications-processor:MCIMX6ULL-EVK diff --git a/board/ge/b1x5v2/Kconfig b/board/ge/b1x5v2/Kconfig new file mode 100644 index 00000000000..80a5bcae7de --- /dev/null +++ b/board/ge/b1x5v2/Kconfig @@ -0,0 +1,14 @@ +if TARGET_GE_B1X5V2 + +config SYS_BOARD + default "b1x5v2" + +config SYS_VENDOR + default "ge" + +config SYS_CONFIG_NAME + default "ge_b1x5v2" + +source "board/ge/common/Kconfig" + +endif diff --git a/board/ge/b1x5v2/MAINTAINERS b/board/ge/b1x5v2/MAINTAINERS new file mode 100644 index 00000000000..f22d4928355 --- /dev/null +++ b/board/ge/b1x5v2/MAINTAINERS @@ -0,0 +1,9 @@ +GE B1X5V2 BOARD +M: Huan 'Kitty' Wang <HuanWang@ge.com> +M: Ian Ray <ian.ray@ge.com> +M: Sebastian Reichel <sebastian.reichel@collabora.com> +S: Maintained +F: arch/arm/dts/imx6dl-b1x5v2.dts +F: board/ge/b1x5v2/ +F: configs/ge_b1x5v2_defconfig +F: include/configs/ge_b1x5v2.h diff --git a/board/ge/b1x5v2/Makefile b/board/ge/b1x5v2/Makefile new file mode 100644 index 00000000000..8a27af52e1a --- /dev/null +++ b/board/ge/b1x5v2/Makefile @@ -0,0 +1,6 @@ +# SPDX-License-Identifier: GPL-2.0+ +# +# Copyright 2018-2020 Collabora +# Copyright 2018-2020 GE + +obj-y := b1x5v2.o spl.o diff --git a/board/ge/b1x5v2/b1x5v2.c b/board/ge/b1x5v2/b1x5v2.c new file mode 100644 index 00000000000..1cb347fd9e5 --- /dev/null +++ b/board/ge/b1x5v2/b1x5v2.c @@ -0,0 +1,698 @@ +/* + * GE B105v2, B125v2, B155v2 + * + * Copyright 2018-2020 GE Inc. + * Copyright 2018-2020 Collabora Ltd. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <asm/arch/clock.h> +#include <asm/arch/crm_regs.h> +#include <asm/arch/imx-regs.h> +#include <asm/arch/iomux.h> +#include <asm/arch/sys_proto.h> +#include <asm/gpio.h> +#include <asm/io.h> +#include <asm/mach-imx/video.h> +#include <command.h> +#include <common.h> +#include <i2c.h> +#include <input.h> +#include <ipu_pixfmt.h> +#include <linux/delay.h> +#include <linux/fb.h> +#include <malloc.h> +#include <miiphy.h> +#include <micrel.h> +#include <netdev.h> +#include <panel.h> +#include <rtc.h> +#include <spi_flash.h> +#include <version.h> + +#include "../common/vpd_reader.h" + +DECLARE_GLOBAL_DATA_PTR; + +#ifndef CONFIG_SPL_BUILD + +#define B1X5V2_GE_VPD_OFFSET 0x0100000 +#define B1X5V2_GE_VPD_SIZE 1022 + +#define VPD_TYPE_INVALID 0x00 +#define VPD_BLOCK_NETWORK 0x20 +#define VPD_BLOCK_HWID 0x44 +#define VPD_MAC_ADDRESS_LENGTH 6 + +#define VPD_FLAG_VALID_MAC BIT(1) + +#define AR8035_PHY_ID 0x004dd072 +#define AR8035_PHY_DEBUG_ADDR_REG 0x1d +#define AR8035_PHY_DEBUG_DATA_REG 0x1e +#define AR8035_HIB_CTRL_REG 0xb +#define AR8035_HIBERNATE_EN (1 << 15) + +static struct vpd_cache { + bool is_read; + u8 product_id; + unsigned char mac[VPD_MAC_ADDRESS_LENGTH]; + u32 flags; +} vpd; + +enum product_type { + PRODUCT_TYPE_B105V2 = 6, + PRODUCT_TYPE_B105PV2 = 7, + PRODUCT_TYPE_B125V2 = 8, + PRODUCT_TYPE_B125PV2 = 9, + PRODUCT_TYPE_B155V2 = 10, + + PRODUCT_TYPE_INVALID = 0, +}; + +int dram_init(void) { + gd->ram_size = imx_ddr_size(); + return 0; +} + +int power_init_board(void) +{ + /* all required PMIC configuration happens via DT */ + return 0; +} + +static int disable_phy_hibernation(struct phy_device *phydev) +{ + unsigned short val; + + if (phydev->drv->uid == AR8035_PHY_ID) { + /* Disable hibernation, other configuration has been done by PHY driver */ + phy_write(phydev, MDIO_DEVAD_NONE, AR8035_PHY_DEBUG_ADDR_REG, AR8035_HIB_CTRL_REG); + val = phy_read(phydev, MDIO_DEVAD_NONE, AR8035_PHY_DEBUG_DATA_REG); + val &= ~AR8035_HIBERNATE_EN; + phy_write(phydev, MDIO_DEVAD_NONE, AR8035_PHY_DEBUG_DATA_REG, val); + } else { + printf("Unknown PHY: %08x\n", phydev->drv->uid); + } + + return 0; +} + +int board_phy_config(struct phy_device *phydev) +{ + if (phydev->drv->config) + phydev->drv->config(phydev); + + disable_phy_hibernation(phydev); + + return 0; +} + +static int auo_g101evn01_detect(const struct display_info_t *info) +{ + char *dev = env_get("devicetype"); + return !strcmp(dev, "B105v2") || !strcmp(dev, "B105Pv2"); +} + +static int auo_g121ean01_detect(const struct display_info_t *info) +{ + char *dev = env_get("devicetype"); + return !strcmp(dev, "B125v2") || !strcmp(dev, "B125Pv2");; +} + +static int auo_g156xtn01_detect(const struct display_info_t *info) +{ + char *dev = env_get("devicetype"); + return !strcmp(dev, "B155v2"); +} + +static void b1x5v2_backlight_enable(int percent) +{ + struct udevice *panel; + int ret; + + ret = uclass_get_device(UCLASS_PANEL, 0, &panel); + if (ret) { + printf("Could not find panel: %d\n", ret); + return; + } + + panel_set_backlight(panel, percent); + panel_enable_backlight(panel); + +} + +static void lcd_enable(const struct display_info_t *info) +{ + printf("Enable backlight...\n"); + b1x5v2_backlight_enable(100); +} + +struct display_info_t const displays[] = { +{ + .di = 0, + .bus = -1, + .addr = -1, + .pixfmt = IPU_PIX_FMT_RGB24, + .detect = auo_g156xtn01_detect, + .enable = lcd_enable, + .mode = { + .name = "AUO G156XTN01", + .refresh = 60, + .xres = 1368, /* because of i.MX6 limitation, actually 1366 */ + .yres = 768, + .pixclock = 13158, /* 76 MHz in ps */ + .left_margin = 33, + .right_margin = 67, + .upper_margin = 4, + .lower_margin = 4, + .hsync_len = 94, + .vsync_len = 30, + .sync = FB_SYNC_EXT, + .vmode = FB_VMODE_NONINTERLACED + } +}, +{ + .di = 0, + .bus = -1, + .addr = -1, + .pixfmt = IPU_PIX_FMT_RGB24, + .detect = auo_g121ean01_detect, + .enable = lcd_enable, + .mode = { + .name = "AUO G121EAN01.4", + .refresh = 60, + .xres = 1280, + .yres = 800, + .pixclock = 14992, /* 66.7 MHz in ps */ + .left_margin = 8, + .right_margin = 58, + .upper_margin = 6, + .lower_margin = 4, + .hsync_len = 70, + .vsync_len = 10, + .sync = FB_SYNC_EXT, + .vmode = FB_VMODE_NONINTERLACED + } +}, +{ + .di = 0, + .bus = -1, + .addr = -1, + .pixfmt = IPU_PIX_FMT_RGB24, + .detect = auo_g101evn01_detect, + .enable = lcd_enable, + .mode = { + .name = "AUO G101EVN01.3", + .refresh = 60, + .xres = 1280, + .yres = 800, + .pixclock = 14992, /* 66.7 MHz in ps */ + .left_margin = 8, + .right_margin = 58, + .upper_margin = 6, + .lower_margin = 4, + .hsync_len = 70, + .vsync_len = 10, + .sync = FB_SYNC_EXT, + .vmode = FB_VMODE_NONINTERLACED + } +} +}; +size_t display_count = ARRAY_SIZE(displays); + +static void enable_videopll(void) +{ + struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR; + s32 timeout = 100000; + + setbits_le32(&ccm->analog_pll_video, BM_ANADIG_PLL_VIDEO_POWERDOWN); + + /* PLL_VIDEO 455MHz (24MHz * (37+11/12) / 2) + * | + * PLL5 + * | + * CS2CDR[LDB_DI0_CLK_SEL] + * | + * +----> LDB_DI0_SERIAL_CLK_ROOT + * | + * +--> CSCMR2[LDB_DI0_IPU_DIV] --> LDB_DI0_IPU 455 / 7 = 65 MHz + */ + + clrsetbits_le32(&ccm->analog_pll_video, + BM_ANADIG_PLL_VIDEO_DIV_SELECT | + BM_ANADIG_PLL_VIDEO_POST_DIV_SELECT, + BF_ANADIG_PLL_VIDEO_DIV_SELECT(37) | + BF_ANADIG_PLL_VIDEO_POST_DIV_SELECT(1)); + + writel(BF_ANADIG_PLL_VIDEO_NUM_A(11), &ccm->analog_pll_video_num); + writel(BF_ANADIG_PLL_VIDEO_DENOM_B(12), &ccm->analog_pll_video_denom); + + clrbits_le32(&ccm->analog_pll_video, BM_ANADIG_PLL_VIDEO_POWERDOWN); + + while (timeout--) + if (readl(&ccm->analog_pll_video) & BM_ANADIG_PLL_VIDEO_LOCK) + break; + + if (timeout < 0) + printf("Warning: video pll lock timeout!\n"); + + clrsetbits_le32(&ccm->analog_pll_video, + BM_ANADIG_PLL_VIDEO_BYPASS, + BM_ANADIG_PLL_VIDEO_ENABLE); +} + +static void setup_display(void) +{ + struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR; + struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR; + + enable_videopll(); + + /* When a reset/reboot is performed the display power needs to be turned + * off for atleast 500ms. The boot time is ~300ms, we need to wait for + * an additional 200ms here. Unfortunately we use external PMIC for + * doing the reset, so can not differentiate between POR vs soft reset + */ + mdelay(200); + + /* CCM_CSCMR2 -> ldb_di0_ipu_div [IMX6SDLRM page 839] */ + /* divide IPU clock by 7 */ + setbits_le32(&mxc_ccm->cscmr2, MXC_CCM_CSCMR2_LDB_DI0_IPU_DIV); + + /* CCM_CHSCCDR -> ipu1_di0_clk_sel [IMX6SDLRM page 849] */ + /* Set LDB_DI0 as clock source for IPU_DI0 */ + clrsetbits_le32(&mxc_ccm->chsccdr, + MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_MASK, + (CHSCCDR_CLK_SEL_LDB_DI0 << + MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_OFFSET)); + + /* Turn on IPU LDB DI0 clocks */ + setbits_le32(&mxc_ccm->CCGR3, MXC_CCM_CCGR3_LDB_DI0_MASK); + + enable_ipu_clock(); + + /* IOMUXC_GPR2 [IMX6SDLRM page 2049] */ + /* Set LDB Channel 0 in SPWG 24 Bit mode */ + writel(IOMUXC_GPR2_DI0_VS_POLARITY_ACTIVE_HIGH | + IOMUXC_GPR2_BIT_MAPPING_CH0_SPWG | + IOMUXC_GPR2_DATA_WIDTH_CH0_24BIT | + IOMUXC_GPR2_LVDS_CH0_MODE_ENABLED_DI0, + &iomux->gpr[2]); + + /* IOMUXC_GPR3 [IMX6SDLRM page 2051] */ + /* LVDS0 is connected to IPU DI0 */ + clrsetbits_le32(&iomux->gpr[3], + IOMUXC_GPR3_LVDS0_MUX_CTL_MASK, + (IOMUXC_GPR3_MUX_SRC_IPU1_DI0 << + IOMUXC_GPR3_LVDS0_MUX_CTL_OFFSET)); +} + +/* + * Do not overwrite the console + * Use always serial for U-Boot console + */ +int overwrite_console(void) +{ + return 1; +} + +int board_early_init_f(void) +{ + select_ldb_di_clock_source(MXC_PLL5_CLK); + + return 0; +} + +static int eeti_touch_get_model(struct udevice *dev, char *result) { + u8 query[68] = {0x67, 0x00, 0x42, 0x00, 0x03, 0x01, 'E', 0x00, 0x00, 0x00}; + struct i2c_msg qmsg = { + .addr = 0x2a, + .flags = 0, + .len = sizeof(query), + .buf = query, + }; + u8 reply[66] = {0}; + struct i2c_msg rmsg = { + .addr = 0x2a, + .flags = I2C_M_RD, + .len = sizeof(reply), + .buf = reply, + }; + int err; + + err = dm_i2c_xfer(dev, &qmsg, 1); + if (err) + return err; + + /* + * device sends IRQ when its ok to read. To keep the code + * simple we just wait an arbitrary, long enough time period. + */ + mdelay(10); + + err = dm_i2c_xfer(dev, &rmsg, 1); + if (err) + return err; + + if (reply[0] != 0x42 || reply[1] != 0x00 || + reply[2] != 0x03 || reply[4] != 'E') + return -EPROTO; + + memcpy(result, reply+5, 10); + return 0; +} + +static bool b1x5v2_board_is_p_model(void) +{ + struct udevice *bus = NULL; + struct udevice *dev = NULL; + int err; + + err = uclass_get_device_by_name(UCLASS_I2C, "i2c@21a0000", &bus); + if (err || !bus) { + printf("Could not get I2C bus: %d\n", err); + return true; + } + + /* The P models do not have this port expander */ + err = dm_i2c_probe(bus, 0x21, 0, &dev); + if (err || !dev) { + return true; + } + + return false; +} + +static enum product_type b1x5v2_board_type(void) +{ + struct udevice *bus = NULL; + struct udevice *dev = NULL; + char model[11] = {0}; + int err; + int retry; + + err = uclass_get_device_by_name(UCLASS_I2C, "i2c@21a8000", &bus); + if (err) { + printf("Could not get I2C bus: %d\n", err); + return PRODUCT_TYPE_INVALID; + } + + err = dm_i2c_probe(bus, 0x41, 0, &dev); + if (!err && dev) { /* Ilitek Touchscreen */ + if (b1x5v2_board_is_p_model()) { + return PRODUCT_TYPE_B105PV2; + } else { + return PRODUCT_TYPE_B105V2; + } + } + + err = dm_i2c_probe(bus, 0x2a, 0, &dev); + if (err || !dev) { + printf("Could not find touchscreen: %d\n", err); + return PRODUCT_TYPE_INVALID; + } + + for (retry = 0; retry < 3; ++retry) { + err = eeti_touch_get_model(dev, model); + if (!err) + break; + printf("Retry %d read EETI touchscreen model: %d\n", retry + 1, err); + } + if (err) { + printf("Could not read EETI touchscreen model: %d\n", err); + return PRODUCT_TYPE_INVALID; + } + + if (!strcmp(model, "Orion_1320")) { /* EETI EXC80H60 */ + if (b1x5v2_board_is_p_model()) { + return PRODUCT_TYPE_B125PV2; + } else { + return PRODUCT_TYPE_B125V2; + } + } else if (!strcmp(model, "Orion_1343")) { /* EETI EXC80H84 */ + return PRODUCT_TYPE_B155V2; + } + + printf("Unknown EETI touchscreen model: %s\n", model); + return PRODUCT_TYPE_INVALID; +} + +static void set_env_per_board_type(enum product_type type) +{ + switch (type) { + case PRODUCT_TYPE_B105V2: + env_set("resolution", "1280x800"); + env_set("devicetype", "B105v2"); + env_set("fdtfile", "imx6dl-b105v2.dtb"); + break; + case PRODUCT_TYPE_B105PV2: + env_set("resolution", "1280x800"); + env_set("devicetype", "B105Pv2"); + env_set("fdtfile", "imx6dl-b105pv2.dtb"); + break; + case PRODUCT_TYPE_B125V2: + env_set("resolution", "1280x800"); + env_set("devicetype", "B125v2"); + env_set("fdtfile", "imx6dl-b125v2.dtb"); + break; + case PRODUCT_TYPE_B125PV2: + env_set("resolution", "1280x800"); + env_set("devicetype", "B125Pv2"); + env_set("fdtfile", "imx6dl-b125pv2.dtb"); + break; + case PRODUCT_TYPE_B155V2: + env_set("resolution", "1366x768"); + env_set("devicetype", "B155v2"); + env_set("fdtfile", "imx6dl-b155v2.dtb"); + break; + default: + break; + } +} + +static int b1x5v2_board_type_autodetect(void) +{ + enum product_type product = b1x5v2_board_type(); + if (product != PRODUCT_TYPE_INVALID) { + set_env_per_board_type(product); + return 0; + } + return -1; +} + +/* + * Extracts MAC and product information from the VPD. + */ +static int vpd_callback(struct vpd_cache *vpd, u8 id, u8 version, u8 type, + size_t size, u8 const *data) +{ + if (type == VPD_TYPE_INVALID) + return 0; + + if (id == VPD_BLOCK_HWID && version == 1 && size >= 1) { + vpd->product_id = data[0]; + } else if (id == VPD_BLOCK_NETWORK && version == 1) { + if (size >= VPD_MAC_ADDRESS_LENGTH) { + memcpy(vpd->mac, data, VPD_MAC_ADDRESS_LENGTH); + vpd->flags |= VPD_FLAG_VALID_MAC; + } + } + + return 0; +} + +static int read_spi_vpd(struct vpd_cache *cache, + int (*process_block)(struct vpd_cache *, u8 id, u8 version, + u8 type, size_t size, u8 const *data)) +{ + static const int size = B1X5V2_GE_VPD_SIZE; + struct udevice *dev; + int ret; + u8 *data; + + ret = uclass_get_device_by_name(UCLASS_SPI_FLASH, "m25p80@0", &dev); + if (ret) + return ret; + + data = malloc(size); + if (!data) + return -ENOMEM; + + ret = spi_flash_read_dm(dev, B1X5V2_GE_VPD_OFFSET, size, data); + if (ret) { + free(data); + return ret; + } + + ret = vpd_reader(size, data, cache, process_block); + + free(data); + + return ret; +} + +int board_init(void) +{ + if (!read_spi_vpd(&vpd, vpd_callback)) { + vpd.is_read = true; + } + + /* address of boot parameters */ + gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; + setup_display(); + + return 0; +} + +static void init_bootcause(void) +{ + const char *cause; + + /* We care about WDOG only, treating everything else as + * a power-on-reset. + */ + if (get_imx_reset_cause() & 0x0010) + cause = "WDOG"; + else + cause = "POR"; + + env_set("bootcause", cause); +} + +int misc_init_r(void) +{ + init_bootcause(); + + return 0; +} + +#define M41T62_REG_FLAGS 0xf +#define M41T62_FLAGS_OF (1 << 2) +static void check_time(void) +{ + struct udevice *rtc = NULL; + struct rtc_time tm; + u8 val; + int ret; + + ret = uclass_get_device_by_name(UCLASS_RTC, "m41t62@68", &rtc); + if (ret) { + printf("Could not get RTC: %d\n", ret); + env_set("rtc_status", "FAIL"); + return; + } + + ret = dm_i2c_read(rtc, M41T62_REG_FLAGS, &val, sizeof(val)); + if (ret) { + printf("Could not read RTC register: %d\n", ret); + env_set("rtc_status", "FAIL"); + return; + } + + ret = dm_rtc_reset(rtc); + if (ret) { + printf("Could not reset RTC: %d\n", ret); + env_set("rtc_status", "FAIL"); + return; + } + + if (val & M41T62_FLAGS_OF) { + env_set("rtc_status", "STOP"); + return; + } + + ret = dm_rtc_get(rtc, &tm); + if (ret) { + printf("Could not read RTC: %d\n", ret); + env_set("rtc_status", "FAIL"); + return; + } + + if (tm.tm_year > 2037) { + tm.tm_sec = 0; + tm.tm_min = 0; + tm.tm_hour = 0; + tm.tm_mday = 1; + tm.tm_wday = 2; + tm.tm_mon = 1; + tm.tm_year = 2036; + + ret = dm_rtc_set(rtc, &tm); + if (ret) { + printf("Could not update RTC: %d\n", ret); + env_set("rtc_status", "FAIL"); + return; + } + + printf("RTC behind 2037, capped to 2036 for userspace handling\n"); + env_set("rtc_status", "2038"); + return; + } + + env_set("rtc_status", "OK"); +} + +static void process_vpd(struct vpd_cache *vpd) +{ + if (!vpd->is_read) { + printf("VPD wasn't read\n"); + return; + } + + if (vpd->flags & VPD_FLAG_VALID_MAC) { + eth_env_set_enetaddr_by_index("eth", 0, vpd->mac); + env_set("ethact", "eth0"); + } +} + +int board_late_init(void) +{ + process_vpd(&vpd); + + if (vpd.product_id >= PRODUCT_TYPE_B105V2 && + vpd.product_id <= PRODUCT_TYPE_B155V2) { + set_env_per_board_type((enum product_type)vpd.product_id); + } else { + b1x5v2_board_type_autodetect(); + } + + printf("Board: GE %s\n", env_get("devicetype")); + + check_time(); + + return 0; +} + +#ifdef CONFIG_OF_BOARD_SETUP +int ft_board_setup(void *blob, struct bd_info *bd) +{ + char *rtc_status = env_get("rtc_status"); + + fdt_setprop(blob, 0, "ge,boot-ver", version_string, + strlen(version_string) + 1); + fdt_setprop(blob, 0, "ge,rtc-status", rtc_status, + strlen(rtc_status) + 1); + + return 0; +} +#endif + +static int do_b1x5v2_autodetect(struct cmd_tbl *cmdtp, int flag, int argc, char * const argv[]) +{ + int err; + + err = b1x5v2_board_type_autodetect(); + if (!err) + printf("Identified %s\n", env_get("devicetype")); + + return 0; +} + +U_BOOT_CMD( + autodetect_devtype, 1, 1, do_b1x5v2_autodetect, + "autodetect b1x5v2 device type", + "" +); + +#endif // CONFIG_SPL_BUILD diff --git a/board/ge/b1x5v2/spl.c b/board/ge/b1x5v2/spl.c new file mode 100644 index 00000000000..2e6f905219f --- /dev/null +++ b/board/ge/b1x5v2/spl.c @@ -0,0 +1,587 @@ +/* + * GE b1x5v2 - QMX6 SPL + * + * Copyright 2013, Adeneo Embedded <www.adeneo-embedded.com> + * Copyright 2018-2020 GE Inc. + * Copyright 2018-2020 Collabora Ltd. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <asm/arch/clock.h> +#include <asm/arch/crm_regs.h> +#include <asm/arch/imx-regs.h> +#include <asm/arch/iomux.h> +#include <asm/arch/mx6-pins.h> +#include <asm/arch/sys_proto.h> +#include <asm/gpio.h> +#include <init.h> +#include <spi.h> +#include <spi_flash.h> +#include <spl.h> + +#if defined(CONFIG_SPL_BUILD) + +#include <asm/arch/mx6-ddr.h> + +#define IMX6DQ_DRIVE_STRENGTH_40_OHM 0x30 +#define IMX6DQ_DRIVE_STRENGTH_48_OHM 0x28 +#define IMX6DQ_DRIVE_STRENGTH IMX6DQ_DRIVE_STRENGTH_40_OHM + +#define QMX6_DDR_PKE_DISABLED 0x00000000 +#define QMX6_DDR_ODT_60_OHM (2 << 16) +#define QMX6_DDR_TYPE_DDR3 0x000c0000 + +#define QMX6_DRAM_SDCKE_PULLUP_100K 0x00003000 +#define QMX6_DRAM_SDBA2_PULLUP_NONE 0x00000000 + +#define SPI_PAD_CTRL (PAD_CTL_HYS | \ + PAD_CTL_SPEED_MED | \ + PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST) + +#define UART_PAD_CTRL (PAD_CTL_PUS_100K_UP | \ + PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | \ + PAD_CTL_SRE_FAST | PAD_CTL_HYS) + +#define SPI1_CS0 IMX_GPIO_NR(3, 19) +#define POWEROFF IMX_GPIO_NR(4, 25) + +static iomux_v3_cfg_t const poweroff_pads[] = { + IOMUX_PADS(PAD_DISP0_DAT4__GPIO4_IO25 | MUX_PAD_CTRL(NO_PAD_CTRL)), +}; + +static iomux_v3_cfg_t const uart2_pads[] = { + IOMUX_PADS(PAD_EIM_D26__UART2_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)), + IOMUX_PADS(PAD_EIM_D27__UART2_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)), +}; + +static iomux_v3_cfg_t const uart3_pads[] = { + IOMUX_PADS(PAD_EIM_D24__UART3_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)), + IOMUX_PADS(PAD_EIM_D25__UART3_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)), +}; + +static iomux_v3_cfg_t const ecspi1_pads[] = { + IOMUX_PADS(PAD_EIM_D16__ECSPI1_SCLK | MUX_PAD_CTRL(SPI_PAD_CTRL)), + IOMUX_PADS(PAD_EIM_D17__ECSPI1_MISO | MUX_PAD_CTRL(SPI_PAD_CTRL)), + IOMUX_PADS(PAD_EIM_D18__ECSPI1_MOSI | MUX_PAD_CTRL(SPI_PAD_CTRL)), + IOMUX_PADS(PAD_EIM_D19__GPIO3_IO19 | MUX_PAD_CTRL(NO_PAD_CTRL)), +}; + +static struct mx6dq_iomux_ddr_regs mx6q_ddr_ioregs = { + .dram_sdclk_0 = IMX6DQ_DRIVE_STRENGTH, + .dram_sdclk_1 = IMX6DQ_DRIVE_STRENGTH, + .dram_cas = IMX6DQ_DRIVE_STRENGTH, + .dram_ras = IMX6DQ_DRIVE_STRENGTH, + .dram_reset = IMX6DQ_DRIVE_STRENGTH, + .dram_sdcke0 = QMX6_DRAM_SDCKE_PULLUP_100K, + .dram_sdcke1 = QMX6_DRAM_SDCKE_PULLUP_100K, + .dram_sdba2 = QMX6_DRAM_SDBA2_PULLUP_NONE, + .dram_sdodt0 = IMX6DQ_DRIVE_STRENGTH, + .dram_sdodt1 = IMX6DQ_DRIVE_STRENGTH, + .dram_sdqs0 = IMX6DQ_DRIVE_STRENGTH, + .dram_sdqs1 = IMX6DQ_DRIVE_STRENGTH, + .dram_sdqs2 = IMX6DQ_DRIVE_STRENGTH, + .dram_sdqs3 = IMX6DQ_DRIVE_STRENGTH, + .dram_sdqs4 = IMX6DQ_DRIVE_STRENGTH, + .dram_sdqs5 = IMX6DQ_DRIVE_STRENGTH, + .dram_sdqs6 = IMX6DQ_DRIVE_STRENGTH, + .dram_sdqs7 = IMX6DQ_DRIVE_STRENGTH, + .dram_dqm0 = IMX6DQ_DRIVE_STRENGTH, + .dram_dqm1 = IMX6DQ_DRIVE_STRENGTH, + .dram_dqm2 = IMX6DQ_DRIVE_STRENGTH, + .dram_dqm3 = IMX6DQ_DRIVE_STRENGTH, + .dram_dqm4 = IMX6DQ_DRIVE_STRENGTH, + .dram_dqm5 = IMX6DQ_DRIVE_STRENGTH, + .dram_dqm6 = IMX6DQ_DRIVE_STRENGTH, + .dram_dqm7 = IMX6DQ_DRIVE_STRENGTH, +}; + +static const struct mx6sdl_iomux_ddr_regs mx6dl_ddr_ioregs = { + .dram_sdclk_0 = IMX6DQ_DRIVE_STRENGTH, + .dram_sdclk_1 = IMX6DQ_DRIVE_STRENGTH, + .dram_cas = IMX6DQ_DRIVE_STRENGTH, + .dram_ras = IMX6DQ_DRIVE_STRENGTH, + .dram_reset = IMX6DQ_DRIVE_STRENGTH, + .dram_sdcke0 = QMX6_DRAM_SDCKE_PULLUP_100K, + .dram_sdcke1 = QMX6_DRAM_SDCKE_PULLUP_100K, + .dram_sdba2 = QMX6_DRAM_SDBA2_PULLUP_NONE, + .dram_sdodt0 = IMX6DQ_DRIVE_STRENGTH, + .dram_sdodt1 = IMX6DQ_DRIVE_STRENGTH, + .dram_sdqs0 = IMX6DQ_DRIVE_STRENGTH, + .dram_sdqs1 = IMX6DQ_DRIVE_STRENGTH, + .dram_sdqs2 = IMX6DQ_DRIVE_STRENGTH, + .dram_sdqs3 = IMX6DQ_DRIVE_STRENGTH, + .dram_sdqs4 = IMX6DQ_DRIVE_STRENGTH, + .dram_sdqs5 = IMX6DQ_DRIVE_STRENGTH, + .dram_sdqs6 = IMX6DQ_DRIVE_STRENGTH, + .dram_sdqs7 = IMX6DQ_DRIVE_STRENGTH, + .dram_dqm0 = IMX6DQ_DRIVE_STRENGTH, + .dram_dqm1 = IMX6DQ_DRIVE_STRENGTH, + .dram_dqm2 = IMX6DQ_DRIVE_STRENGTH, + .dram_dqm3 = IMX6DQ_DRIVE_STRENGTH, + .dram_dqm4 = IMX6DQ_DRIVE_STRENGTH, + .dram_dqm5 = IMX6DQ_DRIVE_STRENGTH, + .dram_dqm6 = IMX6DQ_DRIVE_STRENGTH, + .dram_dqm7 = IMX6DQ_DRIVE_STRENGTH, +}; + +static struct mx6dq_iomux_grp_regs mx6q_grp_ioregs = { + .grp_ddr_type = QMX6_DDR_TYPE_DDR3, + .grp_ddrmode_ctl = QMX6_DDR_ODT_60_OHM, + .grp_ddrpke = QMX6_DDR_PKE_DISABLED, + .grp_addds = IMX6DQ_DRIVE_STRENGTH, + .grp_ctlds = IMX6DQ_DRIVE_STRENGTH, + .grp_ddrmode = QMX6_DDR_ODT_60_OHM, + .grp_b0ds = IMX6DQ_DRIVE_STRENGTH, + .grp_b1ds = IMX6DQ_DRIVE_STRENGTH, + .grp_b2ds = IMX6DQ_DRIVE_STRENGTH, + .grp_b3ds = IMX6DQ_DRIVE_STRENGTH, + .grp_b4ds = IMX6DQ_DRIVE_STRENGTH, + .grp_b5ds = IMX6DQ_DRIVE_STRENGTH, + .grp_b6ds = IMX6DQ_DRIVE_STRENGTH, + .grp_b7ds = IMX6DQ_DRIVE_STRENGTH, +}; + +static const struct mx6sdl_iomux_grp_regs mx6sdl_grp_ioregs = { + .grp_ddr_type = QMX6_DDR_TYPE_DDR3, + .grp_ddrmode_ctl = QMX6_DDR_ODT_60_OHM, + .grp_ddrpke = QMX6_DDR_PKE_DISABLED, + .grp_addds = IMX6DQ_DRIVE_STRENGTH, + .grp_ctlds = IMX6DQ_DRIVE_STRENGTH, + .grp_ddrmode = QMX6_DDR_ODT_60_OHM, + .grp_b0ds = IMX6DQ_DRIVE_STRENGTH, + .grp_b1ds = IMX6DQ_DRIVE_STRENGTH, + .grp_b2ds = IMX6DQ_DRIVE_STRENGTH, + .grp_b3ds = IMX6DQ_DRIVE_STRENGTH, + .grp_b4ds = IMX6DQ_DRIVE_STRENGTH, + .grp_b5ds = IMX6DQ_DRIVE_STRENGTH, + .grp_b6ds = IMX6DQ_DRIVE_STRENGTH, + .grp_b7ds = IMX6DQ_DRIVE_STRENGTH, +}; + +const struct mx6_mmdc_calibration mx6q_mmcd_calib = { + .p0_mpwldectrl0 = 0x0016001A, + .p0_mpwldectrl1 = 0x0023001C, + .p1_mpwldectrl0 = 0x0028003A, + .p1_mpwldectrl1 = 0x001F002C, + .p0_mpdgctrl0 = 0x43440354, + .p0_mpdgctrl1 = 0x033C033C, + .p1_mpdgctrl0 = 0x43300368, + .p1_mpdgctrl1 = 0x03500330, + .p0_mprddlctl = 0x3228242E, + .p1_mprddlctl = 0x2C2C2636, + .p0_mpwrdlctl = 0x36323A38, + .p1_mpwrdlctl = 0x42324440, +}; + +const struct mx6_mmdc_calibration mx6q_2g_mmcd_calib = { + .p0_mpwldectrl0 = 0x00080016, + .p0_mpwldectrl1 = 0x001D0016, + .p1_mpwldectrl0 = 0x0018002C, + .p1_mpwldectrl1 = 0x000D001D, + .p0_mpdgctrl0 = 0x43200334, + .p0_mpdgctrl1 = 0x0320031C, + .p1_mpdgctrl0 = 0x0344034C, + .p1_mpdgctrl1 = 0x03380314, + .p0_mprddlctl = 0x3E36383A, + .p1_mprddlctl = 0x38363240, + .p0_mpwrdlctl = 0x36364238, + .p1_mpwrdlctl = 0x4230423E, +}; + +const struct mx6_mmdc_calibration mx6q_4g_mmcd_calib = { + .p0_mpwldectrl0 = 0x00180018, + .p0_mpwldectrl1 = 0x00220018, + .p1_mpwldectrl0 = 0x00330046, + .p1_mpwldectrl1 = 0x002B003D, + .p0_mpdgctrl0 = 0x4344034C, + .p0_mpdgctrl1 = 0x033C033C, + .p1_mpdgctrl0 = 0x03700374, + .p1_mpdgctrl1 = 0x03600338, + .p0_mprddlctl = 0x443E3E40, + .p1_mprddlctl = 0x423E3E48, + .p0_mpwrdlctl = 0x3C3C4442, + .p1_mpwrdlctl = 0x46384C46, +}; + +static const struct mx6_mmdc_calibration mx6s_mmcd_calib = { + .p0_mpwldectrl0 = 0x00480049, + .p0_mpwldectrl1 = 0x00410044, + .p0_mpdgctrl0 = 0x42480248, + .p0_mpdgctrl1 = 0x023C023C, + .p0_mprddlctl = 0x40424644, + .p0_mpwrdlctl = 0x34323034, +}; + +static const struct mx6_mmdc_calibration mx6s_2g_mmcd_calib = { + .p0_mpwldectrl0 = 0x00450048, + .p0_mpwldectrl1 = 0x003B003F, + .p0_mpdgctrl0 = 0x424C0248, + .p0_mpdgctrl1 = 0x0234023C, + .p0_mprddlctl = 0x40444848, + .p0_mpwrdlctl = 0x38363232, +}; + +static const struct mx6_mmdc_calibration mx6dl_mmcd_calib = { + .p0_mpwldectrl0 = 0x0043004B, + .p0_mpwldectrl1 = 0x003A003E, + .p1_mpwldectrl0 = 0x0047004F, + .p1_mpwldectrl1 = 0x004E0061, + .p0_mpdgctrl0 = 0x42500250, + .p0_mpdgctrl1 = 0x0238023C, + .p1_mpdgctrl0 = 0x42640264, + .p1_mpdgctrl1 = 0x02500258, + .p0_mprddlctl = 0x40424846, + .p1_mprddlctl = 0x46484842, + .p0_mpwrdlctl = 0x38382C30, + .p1_mpwrdlctl = 0x34343430, +}; + +static const struct mx6_mmdc_calibration mx6dl_2g_mmcd_calib = { + .p0_mpwldectrl0 = 0x00450045, + .p0_mpwldectrl1 = 0x00390043, + .p1_mpwldectrl0 = 0x0049004D, + .p1_mpwldectrl1 = 0x004E0061, + .p0_mpdgctrl0 = 0x4240023C, + .p0_mpdgctrl1 = 0x0228022C, + .p1_mpdgctrl0 = 0x02400244, + .p1_mpdgctrl1 = 0x02340238, + .p0_mprddlctl = 0x42464648, + .p1_mprddlctl = 0x4446463C, + .p0_mpwrdlctl = 0x3C38323A, + .p1_mpwrdlctl = 0x34323430, +}; + +static struct mx6_ddr3_cfg mem_ddr_2g = { + .mem_speed = 1600, + .density = 2, + .width = 16, + .banks = 8, + .rowaddr = 14, + .coladdr = 10, + .pagesz = 2, + .trcd = 1310, + .trcmin = 4875, + .trasmin = 3500, +}; + +static struct mx6_ddr3_cfg mem_ddr_4g = { + .mem_speed = 1600, + .density = 4, + .width = 16, + .banks = 8, + .rowaddr = 15, + .coladdr = 10, + .pagesz = 2, + .trcd = 1310, + .trcmin = 4875, + .trasmin = 3500, +}; + +static struct mx6_ddr3_cfg mem_ddr_8g = { + .mem_speed = 1600, + .density = 8, + .width = 16, + .banks = 8, + .rowaddr = 16, + .coladdr = 10, + .pagesz = 2, + .trcd = 1310, + .trcmin = 4875, + .trasmin = 3500, +}; + +static void spl_dram_init(u8 width, u32 memsize) { + struct mx6_ddr_sysinfo sysinfo = { + /* width of data bus: 0=16, 1=32, 2=64 */ + .dsize = width / 32, + /* config for full 4GB range so that get_mem_size() works */ + .cs_density = 32, /* 32Gb per CS */ + + .ncs = 1, + .cs1_mirror = 0, + .rtt_wr = 2, + .rtt_nom = 2, + .walat = 0, + .ralat = 5, + .mif3_mode = 3, + .bi_on = 1, + .sde_to_rst = 0x0d, + .rst_to_cke = 0x20, + }; + + if (is_cpu_type(MXC_CPU_MX6SOLO)) { + sysinfo.walat = 1; + mx6sdl_dram_iocfg(width, &mx6dl_ddr_ioregs, &mx6sdl_grp_ioregs); + + switch(memsize) { + case 512: + mx6_dram_cfg(&sysinfo, &mx6s_2g_mmcd_calib, &mem_ddr_2g); + break; + default: + mx6_dram_cfg(&sysinfo, &mx6s_mmcd_calib, &mem_ddr_4g); + break; + } + } else if (is_cpu_type(MXC_CPU_MX6DL)) { + sysinfo.walat = 1; + mx6sdl_dram_iocfg(width, &mx6dl_ddr_ioregs, &mx6sdl_grp_ioregs); + + switch(memsize) { + case 2048: + mx6_dram_cfg(&sysinfo, &mx6dl_2g_mmcd_calib, &mem_ddr_4g); + break; + default: + mx6_dram_cfg(&sysinfo, &mx6dl_mmcd_calib, &mem_ddr_2g); + break; + } + } else if (is_cpu_type(MXC_CPU_MX6Q)) { + mx6dq_dram_iocfg(width, &mx6q_ddr_ioregs, &mx6q_grp_ioregs); + + switch(memsize) { + case 4096: + sysinfo.cs_density = 16; + sysinfo.ncs = 2; + mx6_dram_cfg(&sysinfo, &mx6q_4g_mmcd_calib, &mem_ddr_8g); + break; + case 2048: + mx6_dram_cfg(&sysinfo, &mx6q_2g_mmcd_calib, &mem_ddr_4g); + break; + default: + mx6_dram_cfg(&sysinfo, &mx6q_mmcd_calib, &mem_ddr_2g); + break; + } + } +} + +/* Define a minimal structure so that the part number can be read via SPL */ +#define CFG_MFG_ADDR_OFFSET (spi->size - SZ_16K) +struct mfgdata { + unsigned char tsize; + /* size of checksummed part in bytes */ + unsigned char ckcnt; + /* checksum corrected byte */ + unsigned char cksum; + /* decimal serial number, packed BCD */ + unsigned char serial[6]; + /* part number, right justified, ASCII */ + unsigned char pn[16]; +}; + +static void conv_ascii(unsigned char *dst, unsigned char *src, int len) +{ + int remain = len; + unsigned char *sptr = src; + unsigned char *dptr = dst; + + while (remain) { + if (*sptr) { + *dptr = *sptr; + dptr++; + } + sptr++; + remain--; + } + *dptr = 0x0; +} + +/* + * Returns the total size of the memory [in MB] the board is equipped with + * + * This is determined via the partnumber which is stored in the + * congatec manufacturing area + */ +static int get_boardmem_size(struct spi_flash *spi) +{ + int ret; + int i; + int arraysize; + char buf[sizeof(struct mfgdata)]; + struct mfgdata *data = (struct mfgdata *)buf; + unsigned char outbuf[32]; + char partnumbers_2g[4][7] = { "016104", "016105", "016304", "016305" }; + char partnumbers_4g[2][7] = { "016308", "016318" }; + char partnumbers_512m[2][7] = { "016203", "616300" }; + + ret = spi_flash_read(spi, CFG_MFG_ADDR_OFFSET, sizeof(struct mfgdata), + buf); + if (ret) + return 1024; /* default to 1GByte in case of error */ + + conv_ascii(outbuf, data->pn, sizeof(data->pn)); + + printf("Detected Congatec QMX6 SOM: %s\n", outbuf); + + /* congatec PN 016104, 016105, 016304, 016305 have 2GiB of RAM */ + arraysize = sizeof(partnumbers_2g) / sizeof(partnumbers_2g[0]); + for (i=0; i < arraysize; i++) { + if (!memcmp(outbuf,partnumbers_2g[i],6)) + return 2048; + } + + /* congatec PN 016308, 016318 have 4GiB of RAM */ + arraysize = sizeof(partnumbers_4g) / sizeof(partnumbers_4g[0]); + for (i=0; i < arraysize; i++) { + if (!memcmp(outbuf,partnumbers_4g[i],6)) + return 4096; + } + + /* congatec PN 016203, 616300 has 512MiB of RAM */ + arraysize = sizeof(partnumbers_512m) / sizeof(partnumbers_512m[0]); + for (i=0; i < arraysize; i++) { + if (!memcmp(outbuf,partnumbers_512m[i],6)) + return 512; + } + + /* default to 1GByte */ + return 1024; +} + +void reset_cpu(ulong addr) +{ +} + +int board_spi_cs_gpio(unsigned bus, unsigned cs) +{ + if (bus == 0 && cs == 0) + return (SPI1_CS0); + else + return -1; +} + +static void memory_init(void) { + struct spi_flash *spi; + u8 width; + u32 size; + + SETUP_IOMUX_PADS(ecspi1_pads); + gpio_direction_output(SPI1_CS0, 0); + + spi = spi_flash_probe(CONFIG_ENV_SPI_BUS, + CONFIG_ENV_SPI_CS, + CONFIG_ENV_SPI_MAX_HZ, CONFIG_ENV_SPI_MODE); + if (!spi) + panic("Cannot identify board type: SPI-NOR flash module not detected\n"); + + /* lock manufacturer area */ + spi_flash_protect(spi, CFG_MFG_ADDR_OFFSET, SZ_16K, true); + + width = is_cpu_type(MXC_CPU_MX6SOLO) ? 32 : 64; + size = get_boardmem_size(spi); + printf("Detected Memory Size: %u\n", size); + + spl_dram_init(width, size); +} + +static void ccgr_init(void) +{ + struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR; + + static const uint32_t ccgr0 = + MXC_CCM_CCGR0_AIPS_TZ1_MASK | + MXC_CCM_CCGR0_AIPS_TZ2_MASK | + MXC_CCM_CCGR0_APBHDMA_MASK | + MXC_CCM_CCGR0_CAAM_SECURE_MEM_MASK | + MXC_CCM_CCGR0_CAAM_WRAPPER_ACLK_MASK | + MXC_CCM_CCGR0_CAAM_WRAPPER_IPG_MASK | + MXC_CCM_CCGR0_CHEETAH_DBG_CLK_MASK; + + static const uint32_t ccgr1 = + MXC_CCM_CCGR1_ECSPI1S_MASK | + MXC_CCM_CCGR1_ENET_MASK | + MXC_CCM_CCGR1_EPIT1S_MASK | + MXC_CCM_CCGR1_EPIT2S_MASK | + MXC_CCM_CCGR1_GPT_BUS_MASK; + + static const uint32_t ccgr2 = + MXC_CCM_CCGR2_IOMUX_IPT_CLK_IO_MASK | + MXC_CCM_CCGR2_IPMUX1_MASK | + MXC_CCM_CCGR2_IPMUX2_MASK | + MXC_CCM_CCGR2_IPMUX3_MASK | + MXC_CCM_CCGR2_IPSYNC_IP2APB_TZASC1_IPGS_MASK | + MXC_CCM_CCGR2_IPSYNC_IP2APB_TZASC2_IPG_MASK | + MXC_CCM_CCGR2_IPSYNC_VDOA_IPG_MASTER_CLK_MASK; + + static const uint32_t ccgr3 = + MXC_CCM_CCGR3_MMDC_CORE_ACLK_FAST_CORE_P0_MASK | + MXC_CCM_CCGR3_MMDC_CORE_ACLK_FAST_CORE_P1_MASK | + MXC_CCM_CCGR3_MMDC_CORE_IPG_CLK_P0_MASK | + MXC_CCM_CCGR3_MMDC_CORE_IPG_CLK_P1_MASK | + MXC_CCM_CCGR3_OCRAM_MASK; + + static const uint32_t ccgr4 = + MXC_CCM_CCGR4_PL301_MX6QFAST1_S133_MASK | + MXC_CCM_CCGR4_PL301_MX6QPER1_BCH_MASK | + MXC_CCM_CCGR4_PL301_MX6QPER2_MAINCLK_ENABLE_MASK | + MXC_CCM_CCGR4_PWM1_MASK | + MXC_CCM_CCGR4_PWM2_MASK | + MXC_CCM_CCGR4_PWM3_MASK | + MXC_CCM_CCGR4_PWM4_MASK; + + static const uint32_t ccgr5 = + MXC_CCM_CCGR5_ROM_MASK | + MXC_CCM_CCGR5_SDMA_MASK | + MXC_CCM_CCGR5_UART_MASK | + MXC_CCM_CCGR5_UART_SERIAL_MASK; + + static const uint32_t ccgr6 = + MXC_CCM_CCGR6_USBOH3_MASK | + MXC_CCM_CCGR6_USDHC1_MASK | + MXC_CCM_CCGR6_USDHC2_MASK | + MXC_CCM_CCGR6_SIM1_CLK_MASK | + MXC_CCM_CCGR6_SIM2_CLK_MASK; + + writel(ccgr0, &ccm->CCGR0); + writel(ccgr1, &ccm->CCGR1); + writel(ccgr2, &ccm->CCGR2); + writel(ccgr3, &ccm->CCGR3); + writel(ccgr4, &ccm->CCGR4); + writel(ccgr5, &ccm->CCGR5); + writel(ccgr6, &ccm->CCGR6); +} + +void board_init_f(ulong dummy) +{ + /* setup clock gating */ + ccgr_init(); + + /* setup AIPS and disable watchdog */ + arch_cpu_init(); + + /* setup AXI */ + gpr_init(); + + /* + * setup poweroff GPIO. This controls system power regulator. Once + * the power button is released this must be enabled to keep system + * running. Not enabling it (or disabling it later) will turn off + * the main system regulator and instantly poweroff the system. We + * do this very early, to reduce the time users have to press the + * power button. + */ + SETUP_IOMUX_PADS(poweroff_pads); + gpio_direction_output(POWEROFF, 1); + + /* setup GP timer */ + timer_init(); + + /* iomux */ + if (CONFIG_MXC_UART_BASE == UART2_BASE) + SETUP_IOMUX_PADS(uart2_pads); + else if (CONFIG_MXC_UART_BASE == UART3_BASE) + SETUP_IOMUX_PADS(uart3_pads); + + /* UART clocks enabled and gd valid - init serial console */ + preloader_console_init(); + + /* Needed for malloc() [used by SPI] to work in SPL prior to board_init_r() */ + spl_init(); + + /* DDR initialization */ + memory_init(); +} + +void spl_board_prepare_for_boot(void) +{ + printf("Load normal U-Boot...\n"); +} +#endif diff --git a/board/ge/bx50v3/Kconfig b/board/ge/bx50v3/Kconfig index 993b0559302..05938560abd 100644 --- a/board/ge/bx50v3/Kconfig +++ b/board/ge/bx50v3/Kconfig @@ -15,4 +15,6 @@ config SYS_SOC config SYS_CONFIG_NAME default "ge_bx50v3" +source "board/ge/common/Kconfig" + endif diff --git a/board/ge/bx50v3/MAINTAINERS b/board/ge/bx50v3/MAINTAINERS index 91d5c86013b..fafbd78c2a0 100644 --- a/board/ge/bx50v3/MAINTAINERS +++ b/board/ge/bx50v3/MAINTAINERS @@ -1,9 +1,14 @@ -GE_BX50V3 BOARD +GE BX50V3 BOARD M: Ian Ray <ian.ray@ge.com> +M: Sebastian Reichel <sebastian.reichel@collabora.com> S: Maintained +F: arch/arm/dts/imx6q-b450v3.dts +F: arch/arm/dts/imx6q-b650v3.dts +F: arch/arm/dts/imx6q-b850v3.dts +F: arch/arm/dts/imx6q-bx50v3* F: board/ge/bx50v3/ -F: include/configs/ge_bx50v3.h -F: configs/ge_bx50v3_defconfig F: configs/ge_b450v3_defconfig F: configs/ge_b650v3_defconfig F: configs/ge_b850v3_defconfig +F: configs/ge_bx50v3_defconfig +F: include/configs/ge_bx50v3.h diff --git a/board/ge/bx50v3/bx50v3.c b/board/ge/bx50v3/bx50v3.c index cf76cf7a338..8a38ac5d4e4 100644 --- a/board/ge/bx50v3/bx50v3.c +++ b/board/ge/bx50v3/bx50v3.c @@ -35,7 +35,7 @@ #include <version.h> #include <stdlib.h> #include <dm/root.h> -#include "../common/ge_common.h" +#include "../common/ge_rtc.h" #include "../common/vpd_reader.h" #include "../../../drivers/net/e1000.h" #include <pci.h> @@ -429,7 +429,7 @@ static void set_confidx(const struct vpd_cache* vpd) int board_init(void) { - if (!read_vpd(&vpd, vpd_callback)) { + if (!read_i2c_vpd(&vpd, vpd_callback)) { int ret, rescan; vpd.is_read = true; diff --git a/board/ge/common/Kconfig b/board/ge/common/Kconfig new file mode 100644 index 00000000000..323ed1f9960 --- /dev/null +++ b/board/ge/common/Kconfig @@ -0,0 +1,7 @@ +config GE_VPD + bool "Enable GE VPD Support" + default y + +config GE_RTC + bool "Enable GE RTC Support" + default y diff --git a/board/ge/common/Makefile b/board/ge/common/Makefile index 8a21dcb8b53..8bd44e3c8a0 100644 --- a/board/ge/common/Makefile +++ b/board/ge/common/Makefile @@ -2,4 +2,5 @@ # # Copyright 2017 General Electric Company -obj-y := vpd_reader.o ge_common.o +obj-$(CONFIG_GE_VPD) += vpd_reader.o +obj-$(CONFIG_GE_RTC) += ge_rtc.o diff --git a/board/ge/common/ge_common.c b/board/ge/common/ge_rtc.c index 48c3778046f..48c3778046f 100644 --- a/board/ge/common/ge_common.c +++ b/board/ge/common/ge_rtc.c diff --git a/board/ge/common/ge_common.h b/board/ge/common/ge_rtc.h index d33486d0829..d33486d0829 100644 --- a/board/ge/common/ge_common.h +++ b/board/ge/common/ge_rtc.h diff --git a/board/ge/common/vpd_reader.c b/board/ge/common/vpd_reader.c index d42b00da2fe..421fee59229 100644 --- a/board/ge/common/vpd_reader.c +++ b/board/ge/common/vpd_reader.c @@ -110,9 +110,9 @@ static const size_t HEADER_BLOCK_ECC_LEN = 4; static const u8 ECC_BLOCK_ID = 0xFF; -static int vpd_reader(size_t size, u8 *data, struct vpd_cache *userdata, - int (*fn)(struct vpd_cache *, u8 id, u8 version, u8 type, - size_t size, u8 const *data)) +int vpd_reader(size_t size, u8 *data, struct vpd_cache *userdata, + int (*fn)(struct vpd_cache *, u8 id, u8 version, u8 type, + size_t size, u8 const *data)) { if (size < HEADER_BLOCK_LEN || !data || !fn) return -EINVAL; @@ -200,9 +200,9 @@ static int vpd_reader(size_t size, u8 *data, struct vpd_cache *userdata, } } -int read_vpd(struct vpd_cache *cache, - int (*process_block)(struct vpd_cache *, u8 id, u8 version, - u8 type, size_t size, u8 const *data)) +int read_i2c_vpd(struct vpd_cache *cache, + int (*process_block)(struct vpd_cache *, u8 id, u8 version, + u8 type, size_t size, u8 const *data)) { struct udevice *dev; int ret; diff --git a/board/ge/common/vpd_reader.h b/board/ge/common/vpd_reader.h index 3045b7e21e2..0c51dc57e90 100644 --- a/board/ge/common/vpd_reader.h +++ b/board/ge/common/vpd_reader.h @@ -16,7 +16,22 @@ struct vpd_cache; * * Returns Non-zero on error. Negative numbers encode errno. */ -int read_vpd(struct vpd_cache *cache, - int (*process_block)(struct vpd_cache *, - u8 id, u8 version, u8 type, - size_t size, u8 const *data)); +int read_i2c_vpd(struct vpd_cache *cache, + int (*process_block)(struct vpd_cache *, u8 id, u8 version, + u8 type, size_t size, u8 const *data)); + +/* + * Read VPD from given data, verify content, call callback for each vital + * product data block. + * + * size: size of the raw VPD data in bytes + * data: raw VPD data read from device + * cache: structure used by process block to store VPD information + * process_block: callback called for each VPD data block + * + * Returns Non-zero on error. Negative numbers encode errno. + */ + +int vpd_reader(size_t size, u8 *data, struct vpd_cache *cache, + int (*process_block)(struct vpd_cache *, u8 id, u8 version, u8 type, + size_t size, u8 const *data)); diff --git a/board/ge/mx53ppd/Kconfig b/board/ge/mx53ppd/Kconfig index 6dc3818cb7b..bebb2fab017 100644 --- a/board/ge/mx53ppd/Kconfig +++ b/board/ge/mx53ppd/Kconfig @@ -13,4 +13,6 @@ config SYS_SOC config SYS_CONFIG_NAME default "mx53ppd" +source "board/ge/common/Kconfig" + endif diff --git a/board/ge/mx53ppd/MAINTAINERS b/board/ge/mx53ppd/MAINTAINERS index 9b64b5d3893..2c06c8ee86c 100644 --- a/board/ge/mx53ppd/MAINTAINERS +++ b/board/ge/mx53ppd/MAINTAINERS @@ -1,7 +1,9 @@ -MX53PPD BOARD +GE PPD BOARD M: Antti Mäentausta <antti.maentausta@ge.com> -M: Martyn Welch <martyn.welch@collabora.co.uk> +M: Ian Ray <ian.ray@ge.com> +M: Sebastian Reichel <sebastian.reichel@collabora.com> S: Maintained -F: board/freescale/mx53ppd/ -F: include/configs/mx53ppd.h +F: arch/arm/dts/imx53-ppd* +F: board/ge/mx53ppd/ F: configs/mx53ppd_defconfig +F: include/configs/mx53ppd.h diff --git a/board/ge/mx53ppd/mx53ppd.c b/board/ge/mx53ppd/mx53ppd.c index 7627e9c370f..ef689733c41 100644 --- a/board/ge/mx53ppd/mx53ppd.c +++ b/board/ge/mx53ppd/mx53ppd.c @@ -36,7 +36,7 @@ #include <watchdog.h> #include "ppd_gpio.h" #include <stdlib.h> -#include "../../ge/common/ge_common.h" +#include "../../ge/common/ge_rtc.h" #include "../../ge/common/vpd_reader.h" DECLARE_GLOBAL_DATA_PTR; @@ -225,7 +225,7 @@ int board_late_init(void) struct vpd_cache vpd; memset(&vpd, 0, sizeof(vpd)); - res = read_vpd(&vpd, vpd_callback); + res = read_i2c_vpd(&vpd, vpd_callback); if (!res) process_vpd(&vpd); else diff --git a/board/k+p/kp_imx53/kp_imx53.c b/board/k+p/kp_imx53/kp_imx53.c index eb5b67d1e62..efca3e0965f 100644 --- a/board/k+p/kp_imx53/kp_imx53.c +++ b/board/k+p/kp_imx53/kp_imx53.c @@ -17,11 +17,13 @@ #include <env.h> #include <power/pmic.h> #include <fsl_pmic.h> +#include <bootstage.h> #include "kp_id_rev.h" #define BOOSTER_OFF IMX_GPIO_NR(2, 23) #define LCD_BACKLIGHT IMX_GPIO_NR(1, 1) #define KEY1 IMX_GPIO_NR(2, 26) +#define LED_RED IMX_GPIO_NR(3, 28) DECLARE_GLOBAL_DATA_PTR; @@ -151,3 +153,52 @@ int board_late_init(void) return ret; } + +#define GPIO_DR 0x0 +#define GPIO_GDIR 0x4 +#define GPIO_ALT1 0x1 +#define GPIO5_BASE 0x53FDC000 +#define IOMUXC_EIM_WAIT 0x53FA81E4 +/* Green LED: GPIO5_0 */ +#define GPIO_GREEN BIT(0) + +void show_boot_progress(int status) +{ + /* + * This BOOTSTAGE_ID is called at very early stage of execution. DM gpio + * is not yet initialized. + */ + if (status == BOOTSTAGE_ID_START_UBOOT_F) { + /* + * After ROM execution the EIM_WAIT PAD is set as ALT0 + * (according to RM it shall be ALT1 after reset). To use it as + * GPIO we need to set it to ALT1. + */ + setbits_le32(((uint32_t *)(IOMUXC_EIM_WAIT)), GPIO_ALT1); + + /* Configure green LED GPIO pin direction */ + setbits_le32(((uint32_t *)(GPIO5_BASE + GPIO_GDIR)), + GPIO_GREEN); + /* Turn on green LED */ + setbits_le32(((uint32_t *)(GPIO5_BASE + GPIO_DR)), GPIO_GREEN); + } + + /* + * This BOOTSTAGE_ID is called just before handling execution to kernel + * - i.e. gpio subsystem is already initialized + */ + if (status == BOOTSTAGE_ID_BOOTM_HANDOFF) { + /* + * Off green LED - the same approach - i.e. non dm gpio + * (*bits_le32) is used as in the very early stage. + */ + clrbits_le32(((uint32_t *)(GPIO5_BASE + GPIO_DR)), + GPIO_GREEN); + + /* + * On red LED + */ + gpio_request(LED_RED, "LED_RED_ERROR"); + gpio_direction_output(LED_RED, 1); + } +} diff --git a/board/phytec/phycore_imx8mm/Kconfig b/board/phytec/phycore_imx8mm/Kconfig new file mode 100644 index 00000000000..92f5524bdb0 --- /dev/null +++ b/board/phytec/phycore_imx8mm/Kconfig @@ -0,0 +1,12 @@ +if TARGET_PHYCORE_IMX8MM + +config SYS_BOARD + default "phycore_imx8mm" + +config SYS_VENDOR + default "phytec" + +config SYS_CONFIG_NAME + default "phycore_imx8mm" + +endif diff --git a/board/phytec/phycore_imx8mm/MAINTAINERS b/board/phytec/phycore_imx8mm/MAINTAINERS new file mode 100644 index 00000000000..9edec7b7d28 --- /dev/null +++ b/board/phytec/phycore_imx8mm/MAINTAINERS @@ -0,0 +1,9 @@ +phyCORE-i.MX8M Mini +M: Teresa Remmet <t.remmet@phytec.de> +W: https://www.phytec.eu/product-eu/system-on-modules/phycore-imx-8m-mini-nano/ +S: Maintained +F: arch/arm/dts/phycore-imx8mm.dts +F: arch/arm/dts/phycore-imx8mm-u-boot.dtsi +F: board/phytec/phycore_imx8mm/ +F: configs/phycore-imx8mm_defconfig +F: include/configs/phycore_imx8mm.h diff --git a/board/phytec/phycore_imx8mm/Makefile b/board/phytec/phycore_imx8mm/Makefile new file mode 100644 index 00000000000..27f6c027b6c --- /dev/null +++ b/board/phytec/phycore_imx8mm/Makefile @@ -0,0 +1,11 @@ +# SPDX-License-Identifier: GPL-2.0-or-later +# +# Copyright (C) 2019-2020 PHYTEC Messtechnik GmbH +# Author: Teresa Remmet <t.remmet@phytec.de> + +obj-y += phycore-imx8mm.o + +ifdef CONFIG_SPL_BUILD +obj-y += spl.o +obj-$(CONFIG_IMX8M_LPDDR4) += lpddr4_timing.o +endif diff --git a/board/phytec/phycore_imx8mm/lpddr4_timing.c b/board/phytec/phycore_imx8mm/lpddr4_timing.c new file mode 100644 index 00000000000..811ac26415a --- /dev/null +++ b/board/phytec/phycore_imx8mm/lpddr4_timing.c @@ -0,0 +1,1846 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (C) 2020 PHYTEC Messtechnik GmbH + * + * Generated code from MX8M_DDR_tool + */ + +#include <linux/kernel.h> +#include <asm/arch/ddr.h> + +static struct dram_cfg_param ddr_ddrc_cfg[] = { + /** Initialize DDRC registers **/ + {0x3d400304, 0x1}, + {0x3d400030, 0x1}, + {0x3d400000, 0xa1080020}, + {0x3d400020, 0x223}, + {0x3d400024, 0x3a980}, + {0x3d400064, 0x5b00d2}, + {0x3d4000d0, 0xc00305ba}, + {0x3d4000d4, 0x940000}, + {0x3d4000dc, 0xd4002d}, + {0x3d4000e0, 0x310000}, + {0x3d4000e8, 0x66004d}, + {0x3d4000ec, 0x16004d}, + {0x3d400100, 0x191e1920}, + {0x3d400104, 0x60630}, + {0x3d40010c, 0xb0b000}, + {0x3d400110, 0xe04080e}, + {0x3d400114, 0x2040c0c}, + {0x3d400118, 0x1010007}, + {0x3d40011c, 0x401}, + {0x3d400130, 0x20600}, + {0x3d400134, 0xc100002}, + {0x3d400138, 0xd8}, + {0x3d400144, 0x96004b}, + {0x3d400180, 0x2ee0017}, + {0x3d400184, 0x2605b8e}, + {0x3d400188, 0x0}, + {0x3d400190, 0x497820a}, + {0x3d400194, 0x80303}, + {0x3d4001b4, 0x170a}, + {0x3d4001a0, 0xe0400018}, + {0x3d4001a4, 0xdf00e4}, + {0x3d4001a8, 0x80000000}, + {0x3d4001b0, 0x11}, + {0x3d4001c0, 0x1}, + {0x3d4001c4, 0x1}, + {0x3d4000f4, 0xc99}, + {0x3d400108, 0x70e1617}, + {0x3d400200, 0x1f}, + {0x3d40020c, 0x0}, + {0x3d400210, 0x1f1f}, + {0x3d400204, 0x80808}, + {0x3d400214, 0x7070707}, + {0x3d400218, 0x7070707}, + {0x3d400250, 0x29001701}, + {0x3d400254, 0x2c}, + {0x3d40025c, 0x4000030}, + {0x3d400264, 0x900093e7}, + {0x3d40026c, 0x2005574}, + {0x3d400400, 0x111}, + {0x3d400408, 0x72ff}, + {0x3d400494, 0x2100e07}, + {0x3d400498, 0x620096}, + {0x3d40049c, 0x1100e07}, + {0x3d4004a0, 0xc8012c}, + {0x3d402020, 0x21}, + {0x3d402024, 0x7d00}, + {0x3d402050, 0x20d040}, + {0x3d402064, 0xc001c}, + {0x3d4020dc, 0x840000}, + {0x3d4020e0, 0x310000}, + {0x3d4020e8, 0x66004d}, + {0x3d4020ec, 0x16004d}, + {0x3d402100, 0xa040305}, + {0x3d402104, 0x30407}, + {0x3d402108, 0x203060b}, + {0x3d40210c, 0x505000}, + {0x3d402110, 0x2040202}, + {0x3d402114, 0x2030202}, + {0x3d402118, 0x1010004}, + {0x3d40211c, 0x301}, + {0x3d402130, 0x20300}, + {0x3d402134, 0xa100002}, + {0x3d402138, 0x1d}, + {0x3d402144, 0x14000a}, + {0x3d402180, 0x640004}, + {0x3d402190, 0x3818200}, + {0x3d402194, 0x80303}, + {0x3d4021b4, 0x100}, + {0x3d4020f4, 0xc99}, + {0x3d403020, 0x21}, + {0x3d403024, 0x1f40}, + {0x3d403050, 0x20d040}, + {0x3d403064, 0x30007}, + {0x3d4030dc, 0x840000}, + {0x3d4030e0, 0x310000}, + {0x3d4030e8, 0x66004d}, + {0x3d4030ec, 0x16004d}, + {0x3d403100, 0xa010102}, + {0x3d403104, 0x30404}, + {0x3d403108, 0x203060b}, + {0x3d40310c, 0x505000}, + {0x3d403110, 0x2040202}, + {0x3d403114, 0x2030202}, + {0x3d403118, 0x1010004}, + {0x3d40311c, 0x301}, + {0x3d403130, 0x20300}, + {0x3d403134, 0xa100002}, + {0x3d403138, 0x8}, + {0x3d403144, 0x50003}, + {0x3d403180, 0x190004}, + {0x3d403190, 0x3818200}, + {0x3d403194, 0x80303}, + {0x3d4031b4, 0x100}, + {0x3d4030f4, 0xc99}, + {0x3d400028, 0x0}, +}; + +/* PHY Initialize Configuration */ +static struct dram_cfg_param ddr_ddrphy_cfg[] = { + {0x100a0, 0x0}, + {0x100a1, 0x1}, + {0x100a2, 0x2}, + {0x100a3, 0x3}, + {0x100a4, 0x4}, + {0x100a5, 0x5}, + {0x100a6, 0x6}, + {0x100a7, 0x7}, + {0x110a0, 0x0}, + {0x110a1, 0x1}, + {0x110a2, 0x3}, + {0x110a3, 0x4}, + {0x110a4, 0x5}, + {0x110a5, 0x2}, + {0x110a6, 0x7}, + {0x110a7, 0x6}, + {0x120a0, 0x0}, + {0x120a1, 0x1}, + {0x120a2, 0x3}, + {0x120a3, 0x2}, + {0x120a4, 0x5}, + {0x120a5, 0x4}, + {0x120a6, 0x7}, + {0x120a7, 0x6}, + {0x130a0, 0x0}, + {0x130a1, 0x1}, + {0x130a2, 0x2}, + {0x130a3, 0x3}, + {0x130a4, 0x4}, + {0x130a5, 0x5}, + {0x130a6, 0x6}, + {0x130a7, 0x7}, + {0x1005f, 0x1ff}, + {0x1015f, 0x1ff}, + {0x1105f, 0x1ff}, + {0x1115f, 0x1ff}, + {0x1205f, 0x1ff}, + {0x1215f, 0x1ff}, + {0x1305f, 0x1ff}, + {0x1315f, 0x1ff}, + {0x11005f, 0x1ff}, + {0x11015f, 0x1ff}, + {0x11105f, 0x1ff}, + {0x11115f, 0x1ff}, + {0x11205f, 0x1ff}, + {0x11215f, 0x1ff}, + {0x11305f, 0x1ff}, + {0x11315f, 0x1ff}, + {0x21005f, 0x1ff}, + {0x21015f, 0x1ff}, + {0x21105f, 0x1ff}, + {0x21115f, 0x1ff}, + {0x21205f, 0x1ff}, + {0x21215f, 0x1ff}, + {0x21305f, 0x1ff}, + {0x21315f, 0x1ff}, + {0x55, 0x1ff}, + {0x1055, 0x1ff}, + {0x2055, 0x1ff}, + {0x3055, 0x1ff}, + {0x4055, 0x1ff}, + {0x5055, 0x1ff}, + {0x6055, 0x1ff}, + {0x7055, 0x1ff}, + {0x8055, 0x1ff}, + {0x9055, 0x1ff}, + {0x200c5, 0x19}, + {0x1200c5, 0x7}, + {0x2200c5, 0x7}, + {0x2002e, 0x2}, + {0x12002e, 0x2}, + {0x22002e, 0x2}, + {0x90204, 0x0}, + {0x190204, 0x0}, + {0x290204, 0x0}, + {0x20024, 0x1ab}, + {0x2003a, 0x0}, + {0x120024, 0x1ab}, + {0x2003a, 0x0}, + {0x220024, 0x1ab}, + {0x2003a, 0x0}, + {0x20056, 0x3}, + {0x120056, 0xa}, + {0x220056, 0xa}, + {0x1004d, 0xe00}, + {0x1014d, 0xe00}, + {0x1104d, 0xe00}, + {0x1114d, 0xe00}, + {0x1204d, 0xe00}, + {0x1214d, 0xe00}, + {0x1304d, 0xe00}, + {0x1314d, 0xe00}, + {0x11004d, 0xe00}, + {0x11014d, 0xe00}, + {0x11104d, 0xe00}, + {0x11114d, 0xe00}, + {0x11204d, 0xe00}, + {0x11214d, 0xe00}, + {0x11304d, 0xe00}, + {0x11314d, 0xe00}, + {0x21004d, 0xe00}, + {0x21014d, 0xe00}, + {0x21104d, 0xe00}, + {0x21114d, 0xe00}, + {0x21204d, 0xe00}, + {0x21214d, 0xe00}, + {0x21304d, 0xe00}, + {0x21314d, 0xe00}, + {0x10049, 0xeba}, + {0x10149, 0xeba}, + {0x11049, 0xeba}, + {0x11149, 0xeba}, + {0x12049, 0xeba}, + {0x12149, 0xeba}, + {0x13049, 0xeba}, + {0x13149, 0xeba}, + {0x110049, 0xeba}, + {0x110149, 0xeba}, + {0x111049, 0xeba}, + {0x111149, 0xeba}, + {0x112049, 0xeba}, + {0x112149, 0xeba}, + {0x113049, 0xeba}, + {0x113149, 0xeba}, + {0x210049, 0xeba}, + {0x210149, 0xeba}, + {0x211049, 0xeba}, + {0x211149, 0xeba}, + {0x212049, 0xeba}, + {0x212149, 0xeba}, + {0x213049, 0xeba}, + {0x213149, 0xeba}, + {0x43, 0x63}, + {0x1043, 0x63}, + {0x2043, 0x63}, + {0x3043, 0x63}, + {0x4043, 0x63}, + {0x5043, 0x63}, + {0x6043, 0x63}, + {0x7043, 0x63}, + {0x8043, 0x63}, + {0x9043, 0x63}, + {0x20018, 0x3}, + {0x20075, 0x4}, + {0x20050, 0x0}, + {0x20008, 0x2ee}, + {0x120008, 0x64}, + {0x220008, 0x19}, + {0x20088, 0x9}, + {0x200b2, 0xdc}, + {0x10043, 0x5a1}, + {0x10143, 0x5a1}, + {0x11043, 0x5a1}, + {0x11143, 0x5a1}, + {0x12043, 0x5a1}, + {0x12143, 0x5a1}, + {0x13043, 0x5a1}, + {0x13143, 0x5a1}, + {0x1200b2, 0xdc}, + {0x110043, 0x5a1}, + {0x110143, 0x5a1}, + {0x111043, 0x5a1}, + {0x111143, 0x5a1}, + {0x112043, 0x5a1}, + {0x112143, 0x5a1}, + {0x113043, 0x5a1}, + {0x113143, 0x5a1}, + {0x2200b2, 0xdc}, + {0x210043, 0x5a1}, + {0x210143, 0x5a1}, + {0x211043, 0x5a1}, + {0x211143, 0x5a1}, + {0x212043, 0x5a1}, + {0x212143, 0x5a1}, + {0x213043, 0x5a1}, + {0x213143, 0x5a1}, + {0x200fa, 0x1}, + {0x1200fa, 0x1}, + {0x2200fa, 0x1}, + {0x20019, 0x1}, + {0x120019, 0x1}, + {0x220019, 0x1}, + {0x200f0, 0x660}, + {0x200f1, 0x0}, + {0x200f2, 0x4444}, + {0x200f3, 0x8888}, + {0x200f4, 0x5665}, + {0x200f5, 0x0}, + {0x200f6, 0x0}, + {0x200f7, 0xf000}, + {0x20025, 0x0}, + {0x2002d, 0x0}, + {0x12002d, 0x0}, + {0x22002d, 0x0}, + {0x200c7, 0x21}, + {0x1200c7, 0x21}, + {0x2200c7, 0x21}, + {0x200ca, 0x24}, + {0x1200ca, 0x24}, + {0x2200ca, 0x24}, +}; + +/* ddr phy trained csr */ +static struct dram_cfg_param ddr_ddrphy_trained_csr[] = { + { 0x200b2, 0x0 }, + { 0x1200b2, 0x0 }, + { 0x2200b2, 0x0 }, + { 0x200cb, 0x0 }, + { 0x10043, 0x0 }, + { 0x110043, 0x0 }, + { 0x210043, 0x0 }, + { 0x10143, 0x0 }, + { 0x110143, 0x0 }, + { 0x210143, 0x0 }, + { 0x11043, 0x0 }, + { 0x111043, 0x0 }, + { 0x211043, 0x0 }, + { 0x11143, 0x0 }, + { 0x111143, 0x0 }, + { 0x211143, 0x0 }, + { 0x12043, 0x0 }, + { 0x112043, 0x0 }, + { 0x212043, 0x0 }, + { 0x12143, 0x0 }, + { 0x112143, 0x0 }, + { 0x212143, 0x0 }, + { 0x13043, 0x0 }, + { 0x113043, 0x0 }, + { 0x213043, 0x0 }, + { 0x13143, 0x0 }, + { 0x113143, 0x0 }, + { 0x213143, 0x0 }, + { 0x80, 0x0 }, + { 0x100080, 0x0 }, + { 0x200080, 0x0 }, + { 0x1080, 0x0 }, + { 0x101080, 0x0 }, + { 0x201080, 0x0 }, + { 0x2080, 0x0 }, + { 0x102080, 0x0 }, + { 0x202080, 0x0 }, + { 0x3080, 0x0 }, + { 0x103080, 0x0 }, + { 0x203080, 0x0 }, + { 0x4080, 0x0 }, + { 0x104080, 0x0 }, + { 0x204080, 0x0 }, + { 0x5080, 0x0 }, + { 0x105080, 0x0 }, + { 0x205080, 0x0 }, + { 0x6080, 0x0 }, + { 0x106080, 0x0 }, + { 0x206080, 0x0 }, + { 0x7080, 0x0 }, + { 0x107080, 0x0 }, + { 0x207080, 0x0 }, + { 0x8080, 0x0 }, + { 0x108080, 0x0 }, + { 0x208080, 0x0 }, + { 0x9080, 0x0 }, + { 0x109080, 0x0 }, + { 0x209080, 0x0 }, + { 0x10080, 0x0 }, + { 0x110080, 0x0 }, + { 0x210080, 0x0 }, + { 0x10180, 0x0 }, + { 0x110180, 0x0 }, + { 0x210180, 0x0 }, + { 0x11080, 0x0 }, + { 0x111080, 0x0 }, + { 0x211080, 0x0 }, + { 0x11180, 0x0 }, + { 0x111180, 0x0 }, + { 0x211180, 0x0 }, + { 0x12080, 0x0 }, + { 0x112080, 0x0 }, + { 0x212080, 0x0 }, + { 0x12180, 0x0 }, + { 0x112180, 0x0 }, + { 0x212180, 0x0 }, + { 0x13080, 0x0 }, + { 0x113080, 0x0 }, + { 0x213080, 0x0 }, + { 0x13180, 0x0 }, + { 0x113180, 0x0 }, + { 0x213180, 0x0 }, + { 0x10081, 0x0 }, + { 0x110081, 0x0 }, + { 0x210081, 0x0 }, + { 0x10181, 0x0 }, + { 0x110181, 0x0 }, + { 0x210181, 0x0 }, + { 0x11081, 0x0 }, + { 0x111081, 0x0 }, + { 0x211081, 0x0 }, + { 0x11181, 0x0 }, + { 0x111181, 0x0 }, + { 0x211181, 0x0 }, + { 0x12081, 0x0 }, + { 0x112081, 0x0 }, + { 0x212081, 0x0 }, + { 0x12181, 0x0 }, + { 0x112181, 0x0 }, + { 0x212181, 0x0 }, + { 0x13081, 0x0 }, + { 0x113081, 0x0 }, + { 0x213081, 0x0 }, + { 0x13181, 0x0 }, + { 0x113181, 0x0 }, + { 0x213181, 0x0 }, + { 0x100d0, 0x0 }, + { 0x1100d0, 0x0 }, + { 0x2100d0, 0x0 }, + { 0x101d0, 0x0 }, + { 0x1101d0, 0x0 }, + { 0x2101d0, 0x0 }, + { 0x110d0, 0x0 }, + { 0x1110d0, 0x0 }, + { 0x2110d0, 0x0 }, + { 0x111d0, 0x0 }, + { 0x1111d0, 0x0 }, + { 0x2111d0, 0x0 }, + { 0x120d0, 0x0 }, + { 0x1120d0, 0x0 }, + { 0x2120d0, 0x0 }, + { 0x121d0, 0x0 }, + { 0x1121d0, 0x0 }, + { 0x2121d0, 0x0 }, + { 0x130d0, 0x0 }, + { 0x1130d0, 0x0 }, + { 0x2130d0, 0x0 }, + { 0x131d0, 0x0 }, + { 0x1131d0, 0x0 }, + { 0x2131d0, 0x0 }, + { 0x100d1, 0x0 }, + { 0x1100d1, 0x0 }, + { 0x2100d1, 0x0 }, + { 0x101d1, 0x0 }, + { 0x1101d1, 0x0 }, + { 0x2101d1, 0x0 }, + { 0x110d1, 0x0 }, + { 0x1110d1, 0x0 }, + { 0x2110d1, 0x0 }, + { 0x111d1, 0x0 }, + { 0x1111d1, 0x0 }, + { 0x2111d1, 0x0 }, + { 0x120d1, 0x0 }, + { 0x1120d1, 0x0 }, + { 0x2120d1, 0x0 }, + { 0x121d1, 0x0 }, + { 0x1121d1, 0x0 }, + { 0x2121d1, 0x0 }, + { 0x130d1, 0x0 }, + { 0x1130d1, 0x0 }, + { 0x2130d1, 0x0 }, + { 0x131d1, 0x0 }, + { 0x1131d1, 0x0 }, + { 0x2131d1, 0x0 }, + { 0x10068, 0x0 }, + { 0x10168, 0x0 }, + { 0x10268, 0x0 }, + { 0x10368, 0x0 }, + { 0x10468, 0x0 }, + { 0x10568, 0x0 }, + { 0x10668, 0x0 }, + { 0x10768, 0x0 }, + { 0x10868, 0x0 }, + { 0x11068, 0x0 }, + { 0x11168, 0x0 }, + { 0x11268, 0x0 }, + { 0x11368, 0x0 }, + { 0x11468, 0x0 }, + { 0x11568, 0x0 }, + { 0x11668, 0x0 }, + { 0x11768, 0x0 }, + { 0x11868, 0x0 }, + { 0x12068, 0x0 }, + { 0x12168, 0x0 }, + { 0x12268, 0x0 }, + { 0x12368, 0x0 }, + { 0x12468, 0x0 }, + { 0x12568, 0x0 }, + { 0x12668, 0x0 }, + { 0x12768, 0x0 }, + { 0x12868, 0x0 }, + { 0x13068, 0x0 }, + { 0x13168, 0x0 }, + { 0x13268, 0x0 }, + { 0x13368, 0x0 }, + { 0x13468, 0x0 }, + { 0x13568, 0x0 }, + { 0x13668, 0x0 }, + { 0x13768, 0x0 }, + { 0x13868, 0x0 }, + { 0x10069, 0x0 }, + { 0x10169, 0x0 }, + { 0x10269, 0x0 }, + { 0x10369, 0x0 }, + { 0x10469, 0x0 }, + { 0x10569, 0x0 }, + { 0x10669, 0x0 }, + { 0x10769, 0x0 }, + { 0x10869, 0x0 }, + { 0x11069, 0x0 }, + { 0x11169, 0x0 }, + { 0x11269, 0x0 }, + { 0x11369, 0x0 }, + { 0x11469, 0x0 }, + { 0x11569, 0x0 }, + { 0x11669, 0x0 }, + { 0x11769, 0x0 }, + { 0x11869, 0x0 }, + { 0x12069, 0x0 }, + { 0x12169, 0x0 }, + { 0x12269, 0x0 }, + { 0x12369, 0x0 }, + { 0x12469, 0x0 }, + { 0x12569, 0x0 }, + { 0x12669, 0x0 }, + { 0x12769, 0x0 }, + { 0x12869, 0x0 }, + { 0x13069, 0x0 }, + { 0x13169, 0x0 }, + { 0x13269, 0x0 }, + { 0x13369, 0x0 }, + { 0x13469, 0x0 }, + { 0x13569, 0x0 }, + { 0x13669, 0x0 }, + { 0x13769, 0x0 }, + { 0x13869, 0x0 }, + { 0x1008c, 0x0 }, + { 0x11008c, 0x0 }, + { 0x21008c, 0x0 }, + { 0x1018c, 0x0 }, + { 0x11018c, 0x0 }, + { 0x21018c, 0x0 }, + { 0x1108c, 0x0 }, + { 0x11108c, 0x0 }, + { 0x21108c, 0x0 }, + { 0x1118c, 0x0 }, + { 0x11118c, 0x0 }, + { 0x21118c, 0x0 }, + { 0x1208c, 0x0 }, + { 0x11208c, 0x0 }, + { 0x21208c, 0x0 }, + { 0x1218c, 0x0 }, + { 0x11218c, 0x0 }, + { 0x21218c, 0x0 }, + { 0x1308c, 0x0 }, + { 0x11308c, 0x0 }, + { 0x21308c, 0x0 }, + { 0x1318c, 0x0 }, + { 0x11318c, 0x0 }, + { 0x21318c, 0x0 }, + { 0x1008d, 0x0 }, + { 0x11008d, 0x0 }, + { 0x21008d, 0x0 }, + { 0x1018d, 0x0 }, + { 0x11018d, 0x0 }, + { 0x21018d, 0x0 }, + { 0x1108d, 0x0 }, + { 0x11108d, 0x0 }, + { 0x21108d, 0x0 }, + { 0x1118d, 0x0 }, + { 0x11118d, 0x0 }, + { 0x21118d, 0x0 }, + { 0x1208d, 0x0 }, + { 0x11208d, 0x0 }, + { 0x21208d, 0x0 }, + { 0x1218d, 0x0 }, + { 0x11218d, 0x0 }, + { 0x21218d, 0x0 }, + { 0x1308d, 0x0 }, + { 0x11308d, 0x0 }, + { 0x21308d, 0x0 }, + { 0x1318d, 0x0 }, + { 0x11318d, 0x0 }, + { 0x21318d, 0x0 }, + { 0x100c0, 0x0 }, + { 0x1100c0, 0x0 }, + { 0x2100c0, 0x0 }, + { 0x101c0, 0x0 }, + { 0x1101c0, 0x0 }, + { 0x2101c0, 0x0 }, + { 0x102c0, 0x0 }, + { 0x1102c0, 0x0 }, + { 0x2102c0, 0x0 }, + { 0x103c0, 0x0 }, + { 0x1103c0, 0x0 }, + { 0x2103c0, 0x0 }, + { 0x104c0, 0x0 }, + { 0x1104c0, 0x0 }, + { 0x2104c0, 0x0 }, + { 0x105c0, 0x0 }, + { 0x1105c0, 0x0 }, + { 0x2105c0, 0x0 }, + { 0x106c0, 0x0 }, + { 0x1106c0, 0x0 }, + { 0x2106c0, 0x0 }, + { 0x107c0, 0x0 }, + { 0x1107c0, 0x0 }, + { 0x2107c0, 0x0 }, + { 0x108c0, 0x0 }, + { 0x1108c0, 0x0 }, + { 0x2108c0, 0x0 }, + { 0x110c0, 0x0 }, + { 0x1110c0, 0x0 }, + { 0x2110c0, 0x0 }, + { 0x111c0, 0x0 }, + { 0x1111c0, 0x0 }, + { 0x2111c0, 0x0 }, + { 0x112c0, 0x0 }, + { 0x1112c0, 0x0 }, + { 0x2112c0, 0x0 }, + { 0x113c0, 0x0 }, + { 0x1113c0, 0x0 }, + { 0x2113c0, 0x0 }, + { 0x114c0, 0x0 }, + { 0x1114c0, 0x0 }, + { 0x2114c0, 0x0 }, + { 0x115c0, 0x0 }, + { 0x1115c0, 0x0 }, + { 0x2115c0, 0x0 }, + { 0x116c0, 0x0 }, + { 0x1116c0, 0x0 }, + { 0x2116c0, 0x0 }, + { 0x117c0, 0x0 }, + { 0x1117c0, 0x0 }, + { 0x2117c0, 0x0 }, + { 0x118c0, 0x0 }, + { 0x1118c0, 0x0 }, + { 0x2118c0, 0x0 }, + { 0x120c0, 0x0 }, + { 0x1120c0, 0x0 }, + { 0x2120c0, 0x0 }, + { 0x121c0, 0x0 }, + { 0x1121c0, 0x0 }, + { 0x2121c0, 0x0 }, + { 0x122c0, 0x0 }, + { 0x1122c0, 0x0 }, + { 0x2122c0, 0x0 }, + { 0x123c0, 0x0 }, + { 0x1123c0, 0x0 }, + { 0x2123c0, 0x0 }, + { 0x124c0, 0x0 }, + { 0x1124c0, 0x0 }, + { 0x2124c0, 0x0 }, + { 0x125c0, 0x0 }, + { 0x1125c0, 0x0 }, + { 0x2125c0, 0x0 }, + { 0x126c0, 0x0 }, + { 0x1126c0, 0x0 }, + { 0x2126c0, 0x0 }, + { 0x127c0, 0x0 }, + { 0x1127c0, 0x0 }, + { 0x2127c0, 0x0 }, + { 0x128c0, 0x0 }, + { 0x1128c0, 0x0 }, + { 0x2128c0, 0x0 }, + { 0x130c0, 0x0 }, + { 0x1130c0, 0x0 }, + { 0x2130c0, 0x0 }, + { 0x131c0, 0x0 }, + { 0x1131c0, 0x0 }, + { 0x2131c0, 0x0 }, + { 0x132c0, 0x0 }, + { 0x1132c0, 0x0 }, + { 0x2132c0, 0x0 }, + { 0x133c0, 0x0 }, + { 0x1133c0, 0x0 }, + { 0x2133c0, 0x0 }, + { 0x134c0, 0x0 }, + { 0x1134c0, 0x0 }, + { 0x2134c0, 0x0 }, + { 0x135c0, 0x0 }, + { 0x1135c0, 0x0 }, + { 0x2135c0, 0x0 }, + { 0x136c0, 0x0 }, + { 0x1136c0, 0x0 }, + { 0x2136c0, 0x0 }, + { 0x137c0, 0x0 }, + { 0x1137c0, 0x0 }, + { 0x2137c0, 0x0 }, + { 0x138c0, 0x0 }, + { 0x1138c0, 0x0 }, + { 0x2138c0, 0x0 }, + { 0x100c1, 0x0 }, + { 0x1100c1, 0x0 }, + { 0x2100c1, 0x0 }, + { 0x101c1, 0x0 }, + { 0x1101c1, 0x0 }, + { 0x2101c1, 0x0 }, + { 0x102c1, 0x0 }, + { 0x1102c1, 0x0 }, + { 0x2102c1, 0x0 }, + { 0x103c1, 0x0 }, + { 0x1103c1, 0x0 }, + { 0x2103c1, 0x0 }, + { 0x104c1, 0x0 }, + { 0x1104c1, 0x0 }, + { 0x2104c1, 0x0 }, + { 0x105c1, 0x0 }, + { 0x1105c1, 0x0 }, + { 0x2105c1, 0x0 }, + { 0x106c1, 0x0 }, + { 0x1106c1, 0x0 }, + { 0x2106c1, 0x0 }, + { 0x107c1, 0x0 }, + { 0x1107c1, 0x0 }, + { 0x2107c1, 0x0 }, + { 0x108c1, 0x0 }, + { 0x1108c1, 0x0 }, + { 0x2108c1, 0x0 }, + { 0x110c1, 0x0 }, + { 0x1110c1, 0x0 }, + { 0x2110c1, 0x0 }, + { 0x111c1, 0x0 }, + { 0x1111c1, 0x0 }, + { 0x2111c1, 0x0 }, + { 0x112c1, 0x0 }, + { 0x1112c1, 0x0 }, + { 0x2112c1, 0x0 }, + { 0x113c1, 0x0 }, + { 0x1113c1, 0x0 }, + { 0x2113c1, 0x0 }, + { 0x114c1, 0x0 }, + { 0x1114c1, 0x0 }, + { 0x2114c1, 0x0 }, + { 0x115c1, 0x0 }, + { 0x1115c1, 0x0 }, + { 0x2115c1, 0x0 }, + { 0x116c1, 0x0 }, + { 0x1116c1, 0x0 }, + { 0x2116c1, 0x0 }, + { 0x117c1, 0x0 }, + { 0x1117c1, 0x0 }, + { 0x2117c1, 0x0 }, + { 0x118c1, 0x0 }, + { 0x1118c1, 0x0 }, + { 0x2118c1, 0x0 }, + { 0x120c1, 0x0 }, + { 0x1120c1, 0x0 }, + { 0x2120c1, 0x0 }, + { 0x121c1, 0x0 }, + { 0x1121c1, 0x0 }, + { 0x2121c1, 0x0 }, + { 0x122c1, 0x0 }, + { 0x1122c1, 0x0 }, + { 0x2122c1, 0x0 }, + { 0x123c1, 0x0 }, + { 0x1123c1, 0x0 }, + { 0x2123c1, 0x0 }, + { 0x124c1, 0x0 }, + { 0x1124c1, 0x0 }, + { 0x2124c1, 0x0 }, + { 0x125c1, 0x0 }, + { 0x1125c1, 0x0 }, + { 0x2125c1, 0x0 }, + { 0x126c1, 0x0 }, + { 0x1126c1, 0x0 }, + { 0x2126c1, 0x0 }, + { 0x127c1, 0x0 }, + { 0x1127c1, 0x0 }, + { 0x2127c1, 0x0 }, + { 0x128c1, 0x0 }, + { 0x1128c1, 0x0 }, + { 0x2128c1, 0x0 }, + { 0x130c1, 0x0 }, + { 0x1130c1, 0x0 }, + { 0x2130c1, 0x0 }, + { 0x131c1, 0x0 }, + { 0x1131c1, 0x0 }, + { 0x2131c1, 0x0 }, + { 0x132c1, 0x0 }, + { 0x1132c1, 0x0 }, + { 0x2132c1, 0x0 }, + { 0x133c1, 0x0 }, + { 0x1133c1, 0x0 }, + { 0x2133c1, 0x0 }, + { 0x134c1, 0x0 }, + { 0x1134c1, 0x0 }, + { 0x2134c1, 0x0 }, + { 0x135c1, 0x0 }, + { 0x1135c1, 0x0 }, + { 0x2135c1, 0x0 }, + { 0x136c1, 0x0 }, + { 0x1136c1, 0x0 }, + { 0x2136c1, 0x0 }, + { 0x137c1, 0x0 }, + { 0x1137c1, 0x0 }, + { 0x2137c1, 0x0 }, + { 0x138c1, 0x0 }, + { 0x1138c1, 0x0 }, + { 0x2138c1, 0x0 }, + { 0x10020, 0x0 }, + { 0x110020, 0x0 }, + { 0x210020, 0x0 }, + { 0x11020, 0x0 }, + { 0x111020, 0x0 }, + { 0x211020, 0x0 }, + { 0x12020, 0x0 }, + { 0x112020, 0x0 }, + { 0x212020, 0x0 }, + { 0x13020, 0x0 }, + { 0x113020, 0x0 }, + { 0x213020, 0x0 }, + { 0x20072, 0x0 }, + { 0x20073, 0x0 }, + { 0x20074, 0x0 }, + { 0x100aa, 0x0 }, + { 0x110aa, 0x0 }, + { 0x120aa, 0x0 }, + { 0x130aa, 0x0 }, + { 0x20010, 0x0 }, + { 0x120010, 0x0 }, + { 0x220010, 0x0 }, + { 0x20011, 0x0 }, + { 0x120011, 0x0 }, + { 0x220011, 0x0 }, + { 0x100ae, 0x0 }, + { 0x1100ae, 0x0 }, + { 0x2100ae, 0x0 }, + { 0x100af, 0x0 }, + { 0x1100af, 0x0 }, + { 0x2100af, 0x0 }, + { 0x110ae, 0x0 }, + { 0x1110ae, 0x0 }, + { 0x2110ae, 0x0 }, + { 0x110af, 0x0 }, + { 0x1110af, 0x0 }, + { 0x2110af, 0x0 }, + { 0x120ae, 0x0 }, + { 0x1120ae, 0x0 }, + { 0x2120ae, 0x0 }, + { 0x120af, 0x0 }, + { 0x1120af, 0x0 }, + { 0x2120af, 0x0 }, + { 0x130ae, 0x0 }, + { 0x1130ae, 0x0 }, + { 0x2130ae, 0x0 }, + { 0x130af, 0x0 }, + { 0x1130af, 0x0 }, + { 0x2130af, 0x0 }, + { 0x20020, 0x0 }, + { 0x120020, 0x0 }, + { 0x220020, 0x0 }, + { 0x100a0, 0x0 }, + { 0x100a1, 0x0 }, + { 0x100a2, 0x0 }, + { 0x100a3, 0x0 }, + { 0x100a4, 0x0 }, + { 0x100a5, 0x0 }, + { 0x100a6, 0x0 }, + { 0x100a7, 0x0 }, + { 0x110a0, 0x0 }, + { 0x110a1, 0x0 }, + { 0x110a2, 0x0 }, + { 0x110a3, 0x0 }, + { 0x110a4, 0x0 }, + { 0x110a5, 0x0 }, + { 0x110a6, 0x0 }, + { 0x110a7, 0x0 }, + { 0x120a0, 0x0 }, + { 0x120a1, 0x0 }, + { 0x120a2, 0x0 }, + { 0x120a3, 0x0 }, + { 0x120a4, 0x0 }, + { 0x120a5, 0x0 }, + { 0x120a6, 0x0 }, + { 0x120a7, 0x0 }, + { 0x130a0, 0x0 }, + { 0x130a1, 0x0 }, + { 0x130a2, 0x0 }, + { 0x130a3, 0x0 }, + { 0x130a4, 0x0 }, + { 0x130a5, 0x0 }, + { 0x130a6, 0x0 }, + { 0x130a7, 0x0 }, + { 0x2007c, 0x0 }, + { 0x12007c, 0x0 }, + { 0x22007c, 0x0 }, + { 0x2007d, 0x0 }, + { 0x12007d, 0x0 }, + { 0x22007d, 0x0 }, + { 0x400fd, 0x0 }, + { 0x400c0, 0x0 }, + { 0x90201, 0x0 }, + { 0x190201, 0x0 }, + { 0x290201, 0x0 }, + { 0x90202, 0x0 }, + { 0x190202, 0x0 }, + { 0x290202, 0x0 }, + { 0x90203, 0x0 }, + { 0x190203, 0x0 }, + { 0x290203, 0x0 }, + { 0x90204, 0x0 }, + { 0x190204, 0x0 }, + { 0x290204, 0x0 }, + { 0x90205, 0x0 }, + { 0x190205, 0x0 }, + { 0x290205, 0x0 }, + { 0x90206, 0x0 }, + { 0x190206, 0x0 }, + { 0x290206, 0x0 }, + { 0x90207, 0x0 }, + { 0x190207, 0x0 }, + { 0x290207, 0x0 }, + { 0x90208, 0x0 }, + { 0x190208, 0x0 }, + { 0x290208, 0x0 }, + { 0x10062, 0x0 }, + { 0x10162, 0x0 }, + { 0x10262, 0x0 }, + { 0x10362, 0x0 }, + { 0x10462, 0x0 }, + { 0x10562, 0x0 }, + { 0x10662, 0x0 }, + { 0x10762, 0x0 }, + { 0x10862, 0x0 }, + { 0x11062, 0x0 }, + { 0x11162, 0x0 }, + { 0x11262, 0x0 }, + { 0x11362, 0x0 }, + { 0x11462, 0x0 }, + { 0x11562, 0x0 }, + { 0x11662, 0x0 }, + { 0x11762, 0x0 }, + { 0x11862, 0x0 }, + { 0x12062, 0x0 }, + { 0x12162, 0x0 }, + { 0x12262, 0x0 }, + { 0x12362, 0x0 }, + { 0x12462, 0x0 }, + { 0x12562, 0x0 }, + { 0x12662, 0x0 }, + { 0x12762, 0x0 }, + { 0x12862, 0x0 }, + { 0x13062, 0x0 }, + { 0x13162, 0x0 }, + { 0x13262, 0x0 }, + { 0x13362, 0x0 }, + { 0x13462, 0x0 }, + { 0x13562, 0x0 }, + { 0x13662, 0x0 }, + { 0x13762, 0x0 }, + { 0x13862, 0x0 }, + { 0x20077, 0x0 }, + { 0x10001, 0x0 }, + { 0x11001, 0x0 }, + { 0x12001, 0x0 }, + { 0x13001, 0x0 }, + { 0x10040, 0x0 }, + { 0x10140, 0x0 }, + { 0x10240, 0x0 }, + { 0x10340, 0x0 }, + { 0x10440, 0x0 }, + { 0x10540, 0x0 }, + { 0x10640, 0x0 }, + { 0x10740, 0x0 }, + { 0x10840, 0x0 }, + { 0x10030, 0x0 }, + { 0x10130, 0x0 }, + { 0x10230, 0x0 }, + { 0x10330, 0x0 }, + { 0x10430, 0x0 }, + { 0x10530, 0x0 }, + { 0x10630, 0x0 }, + { 0x10730, 0x0 }, + { 0x10830, 0x0 }, + { 0x11040, 0x0 }, + { 0x11140, 0x0 }, + { 0x11240, 0x0 }, + { 0x11340, 0x0 }, + { 0x11440, 0x0 }, + { 0x11540, 0x0 }, + { 0x11640, 0x0 }, + { 0x11740, 0x0 }, + { 0x11840, 0x0 }, + { 0x11030, 0x0 }, + { 0x11130, 0x0 }, + { 0x11230, 0x0 }, + { 0x11330, 0x0 }, + { 0x11430, 0x0 }, + { 0x11530, 0x0 }, + { 0x11630, 0x0 }, + { 0x11730, 0x0 }, + { 0x11830, 0x0 }, + { 0x12040, 0x0 }, + { 0x12140, 0x0 }, + { 0x12240, 0x0 }, + { 0x12340, 0x0 }, + { 0x12440, 0x0 }, + { 0x12540, 0x0 }, + { 0x12640, 0x0 }, + { 0x12740, 0x0 }, + { 0x12840, 0x0 }, + { 0x12030, 0x0 }, + { 0x12130, 0x0 }, + { 0x12230, 0x0 }, + { 0x12330, 0x0 }, + { 0x12430, 0x0 }, + { 0x12530, 0x0 }, + { 0x12630, 0x0 }, + { 0x12730, 0x0 }, + { 0x12830, 0x0 }, + { 0x13040, 0x0 }, + { 0x13140, 0x0 }, + { 0x13240, 0x0 }, + { 0x13340, 0x0 }, + { 0x13440, 0x0 }, + { 0x13540, 0x0 }, + { 0x13640, 0x0 }, + { 0x13740, 0x0 }, + { 0x13840, 0x0 }, + { 0x13030, 0x0 }, + { 0x13130, 0x0 }, + { 0x13230, 0x0 }, + { 0x13330, 0x0 }, + { 0x13430, 0x0 }, + { 0x13530, 0x0 }, + { 0x13630, 0x0 }, + { 0x13730, 0x0 }, + { 0x13830, 0x0 }, +}; + +/* P0 message block paremeter for training firmware */ +struct dram_cfg_param ddr_fsp0_cfg[] = { + {0xd0000, 0x0}, + {0x54003, 0xbb8}, + {0x54004, 0x2}, + {0x54005, 0x2228}, + {0x54006, 0x11}, + {0x54008, 0x131f}, + {0x54009, 0xc8}, + {0x5400b, 0x2}, + {0x5400d, 0x100}, + {0x54012, 0x110}, + {0x54019, 0x2dd4}, + {0x5401a, 0x31}, + {0x5401b, 0x4d66}, + {0x5401c, 0x4d00}, + {0x5401e, 0x16}, + {0x5401f, 0x2dd4}, + {0x54020, 0x31}, + {0x54021, 0x4d66}, + {0x54022, 0x4d00}, + {0x54024, 0x16}, + {0x5402b, 0x1000}, + {0x5402c, 0x1}, + {0x54032, 0xd400}, + {0x54033, 0x312d}, + {0x54034, 0x6600}, + {0x54035, 0x4d}, + {0x54036, 0x4d}, + {0x54037, 0x1600}, + {0x54038, 0xd400}, + {0x54039, 0x312d}, + {0x5403a, 0x6600}, + {0x5403b, 0x4d}, + {0x5403c, 0x4d}, + {0x5403d, 0x1600}, + {0xd0000, 0x1}, +}; + +/* P1 message block paremeter for training firmware */ +static struct dram_cfg_param ddr_fsp1_cfg[] = { + {0xd0000, 0x0}, + {0x54002, 0x101}, + {0x54003, 0x190}, + {0x54004, 0x2}, + {0x54005, 0x2228}, + {0x54006, 0x11}, + {0x54008, 0x121f}, + {0x54009, 0xc8}, + {0x5400b, 0x2}, + {0x5400d, 0x100}, + {0x54012, 0x110}, + {0x54019, 0x84}, + {0x5401a, 0x31}, + {0x5401b, 0x4d66}, + {0x5401c, 0x4d00}, + {0x5401e, 0x16}, + {0x5401f, 0x84}, + {0x54020, 0x31}, + {0x54021, 0x4d66}, + {0x54022, 0x4d00}, + {0x54024, 0x16}, + {0x5402b, 0x1000}, + {0x5402c, 0x1}, + {0x54032, 0x8400}, + {0x54033, 0x3100}, + {0x54034, 0x6600}, + {0x54035, 0x4d}, + {0x54036, 0x4d}, + {0x54037, 0x1600}, + {0x54038, 0x8400}, + {0x54039, 0x3100}, + {0x5403a, 0x6600}, + {0x5403b, 0x4d}, + {0x5403c, 0x4d}, + {0x5403d, 0x1600}, + {0xd0000, 0x1}, +}; + +/* P2 message block paremeter for training firmware */ +static struct dram_cfg_param ddr_fsp2_cfg[] = { + {0xd0000, 0x0}, + {0x54002, 0x102}, + {0x54003, 0x64}, + {0x54004, 0x2}, + {0x54005, 0x2228}, + {0x54006, 0x11}, + {0x54008, 0x121f}, + {0x54009, 0xc8}, + {0x5400b, 0x2}, + {0x5400d, 0x100}, + {0x54012, 0x110}, + {0x54019, 0x84}, + {0x5401a, 0x31}, + {0x5401b, 0x4d66}, + {0x5401c, 0x4d00}, + {0x5401e, 0x16}, + {0x5401f, 0x84}, + {0x54020, 0x31}, + {0x54021, 0x4d66}, + {0x54022, 0x4d00}, + {0x54024, 0x16}, + {0x5402b, 0x1000}, + {0x5402c, 0x1}, + {0x54032, 0x8400}, + {0x54033, 0x3100}, + {0x54034, 0x6600}, + {0x54035, 0x4d}, + {0x54036, 0x4d}, + {0x54037, 0x1600}, + {0x54038, 0x8400}, + {0x54039, 0x3100}, + {0x5403a, 0x6600}, + {0x5403b, 0x4d}, + {0x5403c, 0x4d}, + {0x5403d, 0x1600}, + {0xd0000, 0x1}, +}; + +/* P0 2D message block paremeter for training firmware */ +static struct dram_cfg_param ddr_fsp0_2d_cfg[] = { + {0xd0000, 0x0}, + {0x54003, 0xbb8}, + {0x54004, 0x2}, + {0x54005, 0x2228}, + {0x54006, 0x11}, + {0x54008, 0x61}, + {0x54009, 0xc8}, + {0x5400b, 0x2}, + {0x5400f, 0x100}, + {0x54010, 0x1f7f}, + {0x54012, 0x110}, + {0x54019, 0x2dd4}, + {0x5401a, 0x31}, + {0x5401b, 0x4d66}, + {0x5401c, 0x4d00}, + {0x5401e, 0x16}, + {0x5401f, 0x2dd4}, + {0x54020, 0x31}, + {0x54021, 0x4d66}, + {0x54022, 0x4d00}, + {0x54024, 0x16}, + {0x5402b, 0x1000}, + {0x5402c, 0x1}, + {0x54032, 0xd400}, + {0x54033, 0x312d}, + {0x54034, 0x6600}, + {0x54035, 0x4d}, + {0x54036, 0x4d}, + {0x54037, 0x1600}, + {0x54038, 0xd400}, + {0x54039, 0x312d}, + {0x5403a, 0x6600}, + {0x5403b, 0x4d}, + {0x5403c, 0x4d}, + {0x5403d, 0x1600}, + { 0xd0000, 0x1 }, +}; + +/* DRAM PHY init engine image */ +static struct dram_cfg_param ddr_phy_pie[] = { + {0xd0000, 0x0}, + {0x90000, 0x10}, + {0x90001, 0x400}, + {0x90002, 0x10e}, + {0x90003, 0x0}, + {0x90004, 0x0}, + {0x90005, 0x8}, + {0x90029, 0xb}, + {0x9002a, 0x480}, + {0x9002b, 0x109}, + {0x9002c, 0x8}, + {0x9002d, 0x448}, + {0x9002e, 0x139}, + {0x9002f, 0x8}, + {0x90030, 0x478}, + {0x90031, 0x109}, + {0x90032, 0x0}, + {0x90033, 0xe8}, + {0x90034, 0x109}, + {0x90035, 0x2}, + {0x90036, 0x10}, + {0x90037, 0x139}, + {0x90038, 0xf}, + {0x90039, 0x7c0}, + {0x9003a, 0x139}, + {0x9003b, 0x44}, + {0x9003c, 0x630}, + {0x9003d, 0x159}, + {0x9003e, 0x14f}, + {0x9003f, 0x630}, + {0x90040, 0x159}, + {0x90041, 0x47}, + {0x90042, 0x630}, + {0x90043, 0x149}, + {0x90044, 0x4f}, + {0x90045, 0x630}, + {0x90046, 0x179}, + {0x90047, 0x8}, + {0x90048, 0xe0}, + {0x90049, 0x109}, + {0x9004a, 0x0}, + {0x9004b, 0x7c8}, + {0x9004c, 0x109}, + {0x9004d, 0x0}, + {0x9004e, 0x1}, + {0x9004f, 0x8}, + {0x90050, 0x0}, + {0x90051, 0x45a}, + {0x90052, 0x9}, + {0x90053, 0x0}, + {0x90054, 0x448}, + {0x90055, 0x109}, + {0x90056, 0x40}, + {0x90057, 0x630}, + {0x90058, 0x179}, + {0x90059, 0x1}, + {0x9005a, 0x618}, + {0x9005b, 0x109}, + {0x9005c, 0x40c0}, + {0x9005d, 0x630}, + {0x9005e, 0x149}, + {0x9005f, 0x8}, + {0x90060, 0x4}, + {0x90061, 0x48}, + {0x90062, 0x4040}, + {0x90063, 0x630}, + {0x90064, 0x149}, + {0x90065, 0x0}, + {0x90066, 0x4}, + {0x90067, 0x48}, + {0x90068, 0x40}, + {0x90069, 0x630}, + {0x9006a, 0x149}, + {0x9006b, 0x10}, + {0x9006c, 0x4}, + {0x9006d, 0x18}, + {0x9006e, 0x0}, + {0x9006f, 0x4}, + {0x90070, 0x78}, + {0x90071, 0x549}, + {0x90072, 0x630}, + {0x90073, 0x159}, + {0x90074, 0xd49}, + {0x90075, 0x630}, + {0x90076, 0x159}, + {0x90077, 0x94a}, + {0x90078, 0x630}, + {0x90079, 0x159}, + {0x9007a, 0x441}, + {0x9007b, 0x630}, + {0x9007c, 0x149}, + {0x9007d, 0x42}, + {0x9007e, 0x630}, + {0x9007f, 0x149}, + {0x90080, 0x1}, + {0x90081, 0x630}, + {0x90082, 0x149}, + {0x90083, 0x0}, + {0x90084, 0xe0}, + {0x90085, 0x109}, + {0x90086, 0xa}, + {0x90087, 0x10}, + {0x90088, 0x109}, + {0x90089, 0x9}, + {0x9008a, 0x3c0}, + {0x9008b, 0x149}, + {0x9008c, 0x9}, + {0x9008d, 0x3c0}, + {0x9008e, 0x159}, + {0x9008f, 0x18}, + {0x90090, 0x10}, + {0x90091, 0x109}, + {0x90092, 0x0}, + {0x90093, 0x3c0}, + {0x90094, 0x109}, + {0x90095, 0x18}, + {0x90096, 0x4}, + {0x90097, 0x48}, + {0x90098, 0x18}, + {0x90099, 0x4}, + {0x9009a, 0x58}, + {0x9009b, 0xa}, + {0x9009c, 0x10}, + {0x9009d, 0x109}, + {0x9009e, 0x2}, + {0x9009f, 0x10}, + {0x900a0, 0x109}, + {0x900a1, 0x5}, + {0x900a2, 0x7c0}, + {0x900a3, 0x109}, + {0x900a4, 0x10}, + {0x900a5, 0x10}, + {0x900a6, 0x109}, + {0x40000, 0x811}, + {0x40020, 0x880}, + {0x40040, 0x0}, + {0x40060, 0x0}, + {0x40001, 0x4008}, + {0x40021, 0x83}, + {0x40041, 0x4f}, + {0x40061, 0x0}, + {0x40002, 0x4040}, + {0x40022, 0x83}, + {0x40042, 0x51}, + {0x40062, 0x0}, + {0x40003, 0x811}, + {0x40023, 0x880}, + {0x40043, 0x0}, + {0x40063, 0x0}, + {0x40004, 0x720}, + {0x40024, 0xf}, + {0x40044, 0x1740}, + {0x40064, 0x0}, + {0x40005, 0x16}, + {0x40025, 0x83}, + {0x40045, 0x4b}, + {0x40065, 0x0}, + {0x40006, 0x716}, + {0x40026, 0xf}, + {0x40046, 0x2001}, + {0x40066, 0x0}, + {0x40007, 0x716}, + {0x40027, 0xf}, + {0x40047, 0x2800}, + {0x40067, 0x0}, + {0x40008, 0x716}, + {0x40028, 0xf}, + {0x40048, 0xf00}, + {0x40068, 0x0}, + {0x40009, 0x720}, + {0x40029, 0xf}, + {0x40049, 0x1400}, + {0x40069, 0x0}, + {0x4000a, 0xe08}, + {0x4002a, 0xc15}, + {0x4004a, 0x0}, + {0x4006a, 0x0}, + {0x4000b, 0x623}, + {0x4002b, 0x15}, + {0x4004b, 0x0}, + {0x4006b, 0x0}, + {0x4000c, 0x4028}, + {0x4002c, 0x80}, + {0x4004c, 0x0}, + {0x4006c, 0x0}, + {0x4000d, 0xe08}, + {0x4002d, 0xc1a}, + {0x4004d, 0x0}, + {0x4006d, 0x0}, + {0x4000e, 0x623}, + {0x4002e, 0x1a}, + {0x4004e, 0x0}, + {0x4006e, 0x0}, + {0x4000f, 0x4040}, + {0x4002f, 0x80}, + {0x4004f, 0x0}, + {0x4006f, 0x0}, + {0x40010, 0x2604}, + {0x40030, 0x15}, + {0x40050, 0x0}, + {0x40070, 0x0}, + {0x40011, 0x708}, + {0x40031, 0x5}, + {0x40051, 0x0}, + {0x40071, 0x2002}, + {0x40012, 0x8}, + {0x40032, 0x80}, + {0x40052, 0x0}, + {0x40072, 0x0}, + {0x40013, 0x2604}, + {0x40033, 0x1a}, + {0x40053, 0x0}, + {0x40073, 0x0}, + {0x40014, 0x708}, + {0x40034, 0xa}, + {0x40054, 0x0}, + {0x40074, 0x2002}, + {0x40015, 0x4040}, + {0x40035, 0x80}, + {0x40055, 0x0}, + {0x40075, 0x0}, + {0x40016, 0x60a}, + {0x40036, 0x15}, + {0x40056, 0x1200}, + {0x40076, 0x0}, + {0x40017, 0x61a}, + {0x40037, 0x15}, + {0x40057, 0x1300}, + {0x40077, 0x0}, + {0x40018, 0x60a}, + {0x40038, 0x1a}, + {0x40058, 0x1200}, + {0x40078, 0x0}, + {0x40019, 0x642}, + {0x40039, 0x1a}, + {0x40059, 0x1300}, + {0x40079, 0x0}, + {0x4001a, 0x4808}, + {0x4003a, 0x880}, + {0x4005a, 0x0}, + {0x4007a, 0x0}, + {0x900a7, 0x0}, + {0x900a8, 0x790}, + {0x900a9, 0x11a}, + {0x900aa, 0x8}, + {0x900ab, 0x7aa}, + {0x900ac, 0x2a}, + {0x900ad, 0x10}, + {0x900ae, 0x7b2}, + {0x900af, 0x2a}, + {0x900b0, 0x0}, + {0x900b1, 0x7c8}, + {0x900b2, 0x109}, + {0x900b3, 0x10}, + {0x900b4, 0x2a8}, + {0x900b5, 0x129}, + {0x900b6, 0x8}, + {0x900b7, 0x370}, + {0x900b8, 0x129}, + {0x900b9, 0xa}, + {0x900ba, 0x3c8}, + {0x900bb, 0x1a9}, + {0x900bc, 0xc}, + {0x900bd, 0x408}, + {0x900be, 0x199}, + {0x900bf, 0x14}, + {0x900c0, 0x790}, + {0x900c1, 0x11a}, + {0x900c2, 0x8}, + {0x900c3, 0x4}, + {0x900c4, 0x18}, + {0x900c5, 0xe}, + {0x900c6, 0x408}, + {0x900c7, 0x199}, + {0x900c8, 0x8}, + {0x900c9, 0x8568}, + {0x900ca, 0x108}, + {0x900cb, 0x18}, + {0x900cc, 0x790}, + {0x900cd, 0x16a}, + {0x900ce, 0x8}, + {0x900cf, 0x1d8}, + {0x900d0, 0x169}, + {0x900d1, 0x10}, + {0x900d2, 0x8558}, + {0x900d3, 0x168}, + {0x900d4, 0x70}, + {0x900d5, 0x788}, + {0x900d6, 0x16a}, + {0x900d7, 0x1ff8}, + {0x900d8, 0x85a8}, + {0x900d9, 0x1e8}, + {0x900da, 0x50}, + {0x900db, 0x798}, + {0x900dc, 0x16a}, + {0x900dd, 0x60}, + {0x900de, 0x7a0}, + {0x900df, 0x16a}, + {0x900e0, 0x8}, + {0x900e1, 0x8310}, + {0x900e2, 0x168}, + {0x900e3, 0x8}, + {0x900e4, 0xa310}, + {0x900e5, 0x168}, + {0x900e6, 0xa}, + {0x900e7, 0x408}, + {0x900e8, 0x169}, + {0x900e9, 0x6e}, + {0x900ea, 0x0}, + {0x900eb, 0x68}, + {0x900ec, 0x0}, + {0x900ed, 0x408}, + {0x900ee, 0x169}, + {0x900ef, 0x0}, + {0x900f0, 0x8310}, + {0x900f1, 0x168}, + {0x900f2, 0x0}, + {0x900f3, 0xa310}, + {0x900f4, 0x168}, + {0x900f5, 0x1ff8}, + {0x900f6, 0x85a8}, + {0x900f7, 0x1e8}, + {0x900f8, 0x68}, + {0x900f9, 0x798}, + {0x900fa, 0x16a}, + {0x900fb, 0x78}, + {0x900fc, 0x7a0}, + {0x900fd, 0x16a}, + {0x900fe, 0x68}, + {0x900ff, 0x790}, + {0x90100, 0x16a}, + {0x90101, 0x8}, + {0x90102, 0x8b10}, + {0x90103, 0x168}, + {0x90104, 0x8}, + {0x90105, 0xab10}, + {0x90106, 0x168}, + {0x90107, 0xa}, + {0x90108, 0x408}, + {0x90109, 0x169}, + {0x9010a, 0x58}, + {0x9010b, 0x0}, + {0x9010c, 0x68}, + {0x9010d, 0x0}, + {0x9010e, 0x408}, + {0x9010f, 0x169}, + {0x90110, 0x0}, + {0x90111, 0x8b10}, + {0x90112, 0x168}, + {0x90113, 0x0}, + {0x90114, 0xab10}, + {0x90115, 0x168}, + {0x90116, 0x0}, + {0x90117, 0x1d8}, + {0x90118, 0x169}, + {0x90119, 0x80}, + {0x9011a, 0x790}, + {0x9011b, 0x16a}, + {0x9011c, 0x18}, + {0x9011d, 0x7aa}, + {0x9011e, 0x6a}, + {0x9011f, 0xa}, + {0x90120, 0x0}, + {0x90121, 0x1e9}, + {0x90122, 0x8}, + {0x90123, 0x8080}, + {0x90124, 0x108}, + {0x90125, 0xf}, + {0x90126, 0x408}, + {0x90127, 0x169}, + {0x90128, 0xc}, + {0x90129, 0x0}, + {0x9012a, 0x68}, + {0x9012b, 0x9}, + {0x9012c, 0x0}, + {0x9012d, 0x1a9}, + {0x9012e, 0x0}, + {0x9012f, 0x408}, + {0x90130, 0x169}, + {0x90131, 0x0}, + {0x90132, 0x8080}, + {0x90133, 0x108}, + {0x90134, 0x8}, + {0x90135, 0x7aa}, + {0x90136, 0x6a}, + {0x90137, 0x0}, + {0x90138, 0x8568}, + {0x90139, 0x108}, + {0x9013a, 0xb7}, + {0x9013b, 0x790}, + {0x9013c, 0x16a}, + {0x9013d, 0x1f}, + {0x9013e, 0x0}, + {0x9013f, 0x68}, + {0x90140, 0x8}, + {0x90141, 0x8558}, + {0x90142, 0x168}, + {0x90143, 0xf}, + {0x90144, 0x408}, + {0x90145, 0x169}, + {0x90146, 0xc}, + {0x90147, 0x0}, + {0x90148, 0x68}, + {0x90149, 0x0}, + {0x9014a, 0x408}, + {0x9014b, 0x169}, + {0x9014c, 0x0}, + {0x9014d, 0x8558}, + {0x9014e, 0x168}, + {0x9014f, 0x8}, + {0x90150, 0x3c8}, + {0x90151, 0x1a9}, + {0x90152, 0x3}, + {0x90153, 0x370}, + {0x90154, 0x129}, + {0x90155, 0x20}, + {0x90156, 0x2aa}, + {0x90157, 0x9}, + {0x90158, 0x0}, + {0x90159, 0x400}, + {0x9015a, 0x10e}, + {0x9015b, 0x8}, + {0x9015c, 0xe8}, + {0x9015d, 0x109}, + {0x9015e, 0x0}, + {0x9015f, 0x8140}, + {0x90160, 0x10c}, + {0x90161, 0x10}, + {0x90162, 0x8138}, + {0x90163, 0x10c}, + {0x90164, 0x8}, + {0x90165, 0x7c8}, + {0x90166, 0x101}, + {0x90167, 0x8}, + {0x90168, 0x0}, + {0x90169, 0x8}, + {0x9016a, 0x8}, + {0x9016b, 0x448}, + {0x9016c, 0x109}, + {0x9016d, 0xf}, + {0x9016e, 0x7c0}, + {0x9016f, 0x109}, + {0x90170, 0x0}, + {0x90171, 0xe8}, + {0x90172, 0x109}, + {0x90173, 0x47}, + {0x90174, 0x630}, + {0x90175, 0x109}, + {0x90176, 0x8}, + {0x90177, 0x618}, + {0x90178, 0x109}, + {0x90179, 0x8}, + {0x9017a, 0xe0}, + {0x9017b, 0x109}, + {0x9017c, 0x0}, + {0x9017d, 0x7c8}, + {0x9017e, 0x109}, + {0x9017f, 0x8}, + {0x90180, 0x8140}, + {0x90181, 0x10c}, + {0x90182, 0x0}, + {0x90183, 0x1}, + {0x90184, 0x8}, + {0x90185, 0x8}, + {0x90186, 0x4}, + {0x90187, 0x8}, + {0x90188, 0x8}, + {0x90189, 0x7c8}, + {0x9018a, 0x101}, + {0x90006, 0x0}, + {0x90007, 0x0}, + {0x90008, 0x8}, + {0x90009, 0x0}, + {0x9000a, 0x0}, + {0x9000b, 0x0}, + {0xd00e7, 0x400}, + {0x90017, 0x0}, + {0x9001f, 0x2a}, + {0x90026, 0x6a}, + {0x400d0, 0x0}, + {0x400d1, 0x101}, + {0x400d2, 0x105}, + {0x400d3, 0x107}, + {0x400d4, 0x10f}, + {0x400d5, 0x202}, + {0x400d6, 0x20a}, + {0x400d7, 0x20b}, + {0x2003a, 0x2}, + {0x2000b, 0x5d}, + {0x2000c, 0xbb}, + {0x2000d, 0x753}, + {0x2000e, 0x2c}, + {0x12000b, 0xc}, + {0x12000c, 0x19}, + {0x12000d, 0xfa}, + {0x12000e, 0x10}, + {0x22000b, 0x3}, + {0x22000c, 0x6}, + {0x22000d, 0x3e}, + {0x22000e, 0x10}, + {0x9000c, 0x0}, + {0x9000d, 0x173}, + {0x9000e, 0x60}, + {0x9000f, 0x6110}, + {0x90010, 0x2152}, + {0x90011, 0xdfbd}, + {0x90012, 0x60}, + {0x90013, 0x6152}, + {0x20010, 0x5a}, + {0x20011, 0x3}, + {0x120010, 0x5a}, + {0x120011, 0x3}, + {0x220010, 0x5a}, + {0x220011, 0x3}, + {0x40080, 0xe0}, + {0x40081, 0x12}, + {0x40082, 0xe0}, + {0x40083, 0x12}, + {0x40084, 0xe0}, + {0x40085, 0x12}, + {0x140080, 0xe0}, + {0x140081, 0x12}, + {0x140082, 0xe0}, + {0x140083, 0x12}, + {0x140084, 0xe0}, + {0x140085, 0x12}, + {0x240080, 0xe0}, + {0x240081, 0x12}, + {0x240082, 0xe0}, + {0x240083, 0x12}, + {0x240084, 0xe0}, + {0x240085, 0x12}, + {0x400fd, 0xf}, + {0x10011, 0x1}, + {0x10012, 0x1}, + {0x10013, 0x180}, + {0x10018, 0x1}, + {0x10002, 0x6209}, + {0x100b2, 0x1}, + {0x101b4, 0x1}, + {0x102b4, 0x1}, + {0x103b4, 0x1}, + {0x104b4, 0x1}, + {0x105b4, 0x1}, + {0x106b4, 0x1}, + {0x107b4, 0x1}, + {0x108b4, 0x1}, + {0x11011, 0x1}, + {0x11012, 0x1}, + {0x11013, 0x180}, + {0x11018, 0x1}, + {0x11002, 0x6209}, + {0x110b2, 0x1}, + {0x111b4, 0x1}, + {0x112b4, 0x1}, + {0x113b4, 0x1}, + {0x114b4, 0x1}, + {0x115b4, 0x1}, + {0x116b4, 0x1}, + {0x117b4, 0x1}, + {0x118b4, 0x1}, + {0x12011, 0x1}, + {0x12012, 0x1}, + {0x12013, 0x180}, + {0x12018, 0x1}, + {0x12002, 0x6209}, + {0x120b2, 0x1}, + {0x121b4, 0x1}, + {0x122b4, 0x1}, + {0x123b4, 0x1}, + {0x124b4, 0x1}, + {0x125b4, 0x1}, + {0x126b4, 0x1}, + {0x127b4, 0x1}, + {0x128b4, 0x1}, + {0x13011, 0x1}, + {0x13012, 0x1}, + {0x13013, 0x180}, + {0x13018, 0x1}, + {0x13002, 0x6209}, + {0x130b2, 0x1}, + {0x131b4, 0x1}, + {0x132b4, 0x1}, + {0x133b4, 0x1}, + {0x134b4, 0x1}, + {0x135b4, 0x1}, + {0x136b4, 0x1}, + {0x137b4, 0x1}, + {0x138b4, 0x1}, + {0x2003a, 0x2}, + {0xc0080, 0x2}, + {0xd0000, 0x1} +}; + +static struct dram_fsp_msg ddr_dram_fsp_msg[] = { + { + /* P0 3000mts 1D */ + .drate = 3000, + .fw_type = FW_1D_IMAGE, + .fsp_cfg = ddr_fsp0_cfg, + .fsp_cfg_num = ARRAY_SIZE(ddr_fsp0_cfg), + }, + { + /* P1 400mts 1D */ + .drate = 400, + .fw_type = FW_1D_IMAGE, + .fsp_cfg = ddr_fsp1_cfg, + .fsp_cfg_num = ARRAY_SIZE(ddr_fsp1_cfg), + }, + { + /* P2 100mts 1D */ + .drate = 100, + .fw_type = FW_1D_IMAGE, + .fsp_cfg = ddr_fsp2_cfg, + .fsp_cfg_num = ARRAY_SIZE(ddr_fsp2_cfg), + }, + { + /* P0 3000mts 2D */ + .drate = 3000, + .fw_type = FW_2D_IMAGE, + .fsp_cfg = ddr_fsp0_2d_cfg, + .fsp_cfg_num = ARRAY_SIZE(ddr_fsp0_2d_cfg), + }, +}; + +/* ddr timing config params */ +struct dram_timing_info dram_timing = { + .ddrc_cfg = ddr_ddrc_cfg, + .ddrc_cfg_num = ARRAY_SIZE(ddr_ddrc_cfg), + .ddrphy_cfg = ddr_ddrphy_cfg, + .ddrphy_cfg_num = ARRAY_SIZE(ddr_ddrphy_cfg), + .fsp_msg = ddr_dram_fsp_msg, + .fsp_msg_num = ARRAY_SIZE(ddr_dram_fsp_msg), + .ddrphy_trained_csr = ddr_ddrphy_trained_csr, + .ddrphy_trained_csr_num = ARRAY_SIZE(ddr_ddrphy_trained_csr), + .ddrphy_pie = ddr_phy_pie, + .ddrphy_pie_num = ARRAY_SIZE(ddr_phy_pie), + .fsp_table = { 3000, 400, 100, }, +}; diff --git a/board/phytec/phycore_imx8mm/phycore-imx8mm.c b/board/phytec/phycore_imx8mm/phycore-imx8mm.c new file mode 100644 index 00000000000..d2f3d23b7ea --- /dev/null +++ b/board/phytec/phycore_imx8mm/phycore-imx8mm.c @@ -0,0 +1,53 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (C) 2019-2020 PHYTEC Messtechnik GmbH + * Author: Teresa Remmet <t.remmet@phytec.de> + */ + +#include <common.h> +#include <asm/arch/sys_proto.h> +#include <asm/io.h> +#include <asm/mach-imx/boot_mode.h> +#include <env.h> +#include <miiphy.h> + +DECLARE_GLOBAL_DATA_PTR; + +static int setup_fec(void) +{ + struct iomuxc_gpr_base_regs *gpr = + (struct iomuxc_gpr_base_regs *)IOMUXC_GPR_BASE_ADDR; + + /* Use 125M anatop REF_CLK1 for ENET1, not from external */ + clrsetbits_le32(&gpr->gpr[1], 0x2000, 0); + + return 0; +} + +int board_init(void) +{ + setup_fec(); + + return 0; +} + +int board_mmc_get_env_dev(int devno) +{ + return devno; +} + +int board_late_init(void) +{ + switch (get_boot_device()) { + case SD2_BOOT: + env_set_ulong("mmcdev", 1); + break; + case MMC3_BOOT: + env_set_ulong("mmcdev", 2); + break; + default: + break; + } + + return 0; +} diff --git a/board/phytec/phycore_imx8mm/spl.c b/board/phytec/phycore_imx8mm/spl.c new file mode 100644 index 00000000000..863374d800d --- /dev/null +++ b/board/phytec/phycore_imx8mm/spl.c @@ -0,0 +1,128 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (C) 2019-2020 PHYTEC Messtechnik GmbH + * Author: Teresa Remmet <t.remmet@phytec.de> + */ + +#include <common.h> +#include <asm/arch/clock.h> +#include <asm/arch/ddr.h> +#include <asm/arch/imx8mm_pins.h> +#include <asm/arch/sys_proto.h> +#include <asm/mach-imx/boot_mode.h> +#include <asm/mach-imx/iomux-v3.h> +#include <dm/device.h> +#include <dm/uclass.h> +#include <hang.h> +#include <init.h> +#include <log.h> +#include <spl.h> + +DECLARE_GLOBAL_DATA_PTR; + +int spl_board_boot_device(enum boot_device boot_dev_spl) +{ + switch (boot_dev_spl) { + case SD2_BOOT: + case MMC2_BOOT: + return BOOT_DEVICE_MMC1; + case SD3_BOOT: + case MMC3_BOOT: + return BOOT_DEVICE_MMC2; + case QSPI_BOOT: + return BOOT_DEVICE_NOR; + case USB_BOOT: + return BOOT_DEVICE_BOARD; + default: + return BOOT_DEVICE_NONE; + } +} + +void spl_dram_init(void) +{ + ddr_init(&dram_timing); +} + +void spl_board_init(void) +{ + /* Serial download mode */ + if (is_usb_boot()) { + puts("Back to ROM, SDP\n"); + restore_boot_params(); + } + puts("Normal Boot\n"); +} + +#ifdef CONFIG_SPL_LOAD_FIT +int board_fit_config_name_match(const char *name) +{ + /* Just empty function now - can't decide what to choose */ + debug("%s: %s\n", __func__, name); + + return 0; +} +#endif + +#define UART_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_FSEL1) +#define WDOG_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_ODE) + +static iomux_v3_cfg_t const uart_pads[] = { + IMX8MM_PAD_UART3_RXD_UART3_RX | MUX_PAD_CTRL(UART_PAD_CTRL), + IMX8MM_PAD_UART3_TXD_UART3_TX | MUX_PAD_CTRL(UART_PAD_CTRL), +}; + +static iomux_v3_cfg_t const wdog_pads[] = { + IMX8MM_PAD_GPIO1_IO02_WDOG1_WDOG_B | MUX_PAD_CTRL(WDOG_PAD_CTRL), +}; + +int board_early_init_f(void) +{ + struct wdog_regs *wdog = (struct wdog_regs *)WDOG1_BASE_ADDR; + + imx_iomux_v3_setup_multiple_pads(wdog_pads, ARRAY_SIZE(wdog_pads)); + + set_wdog_reset(wdog); + + imx_iomux_v3_setup_multiple_pads(uart_pads, ARRAY_SIZE(uart_pads)); + + return 0; +} + +void board_init_f(ulong dummy) +{ + struct udevice *dev; + int ret; + + arch_cpu_init(); + + init_uart_clk(2); + + board_early_init_f(); + + timer_init(); + + preloader_console_init(); + + /* Clear the BSS. */ + memset(__bss_start, 0, __bss_end - __bss_start); + + ret = spl_early_init(); + if (ret) { + debug("spl_early_init() failed: %d\n", ret); + hang(); + } + + ret = uclass_get_device_by_name(UCLASS_CLK, + "clock-controller@30380000", &dev); + if (ret < 0) { + printf("Failed to find clock node. Check device tree\n"); + hang(); + } + + enable_tzc380(); + + /* DDR initialization */ + spl_dram_init(); + + board_init_r(NULL, 0); +} |