diff options
Diffstat (limited to 'board')
53 files changed, 1596 insertions, 342 deletions
diff --git a/board/exmeritus/hww1u1a/ddr.c b/board/exmeritus/hww1u1a/ddr.c index 36d02ad5d83..23a71d5af5f 100644 --- a/board/exmeritus/hww1u1a/ddr.c +++ b/board/exmeritus/hww1u1a/ddr.c @@ -30,5 +30,5 @@ void fsl_ddr_board_options(memctl_options_t *popts, popts->clk_adjust = 4; popts->cpo_override = 4; popts->write_data_delay = 2; - popts->twoT_en = 0; + popts->twot_en = 0; } diff --git a/board/freescale/b4860qds/b4860qds_qixis.h b/board/freescale/b4860qds/b4860qds_qixis.h index 2fabbc7b329..272afc1ae04 100644 --- a/board/freescale/b4860qds/b4860qds_qixis.h +++ b/board/freescale/b4860qds/b4860qds_qixis.h @@ -21,4 +21,9 @@ #define QIXIS_SRDS1CLK_122 0x5a #define QIXIS_SRDS1CLK_125 0x5e + +/* SGMII */ +#define PHY_BASE_ADDR 0x18 +#define PORT_NUM 0x04 +#define REGNUM 0x00 #endif diff --git a/board/freescale/b4860qds/b4_pbi.cfg b/board/freescale/b4860qds/b4_pbi.cfg new file mode 100644 index 00000000000..57b726eead8 --- /dev/null +++ b/board/freescale/b4860qds/b4_pbi.cfg @@ -0,0 +1,27 @@ +#PBI commands +#Initialize CPC1 +09010000 00200400 +09138000 00000000 +091380c0 00000100 +#Configure CPC1 as 512KB SRAM +09010100 00000000 +09010104 fff80009 +09010f00 08000000 +09010000 80000000 +#Configure LAW for CPC1 +09000d00 00000000 +09000d04 fff80000 +09000d08 81000012 +#Configure alternate space +09000010 00000000 +09000014 ff000000 +09000018 81000000 +#Configure SPI controller +09110000 80000403 +09110020 2d170008 +09110024 00100008 +09110028 00100008 +0911002c 00100008 +#Flush PBL data +09138000 00000000 +091380c0 00000000 diff --git a/board/freescale/b4860qds/b4_rcw.cfg b/board/freescale/b4860qds/b4_rcw.cfg new file mode 100644 index 00000000000..577dabf1d28 --- /dev/null +++ b/board/freescale/b4860qds/b4_rcw.cfg @@ -0,0 +1,7 @@ +#PBL preamble and RCW header +aa55aa55 010e0100 +# serdes protocol 0x2A_0x98 +140e0018 0f001218 00000000 00000000 +54980000 9000a000 f8025000 a9000000 +01000000 00000000 00000000 0001b1f8 +00000000 14000020 00000000 00000011 diff --git a/board/freescale/b4860qds/ddr.c b/board/freescale/b4860qds/ddr.c index b82b3d409e2..2d149231395 100644 --- a/board/freescale/b4860qds/ddr.c +++ b/board/freescale/b4860qds/ddr.c @@ -31,20 +31,20 @@ dimm_params_t ddr_raw_timing = { .edc_config = 2, /* ECC */ .burst_lengths_bitmask = 0x0c, - .tCKmin_X_ps = 1071, - .caslat_X = 0x2fe << 4, /* 5,6,7,8,9,10,11,13 */ - .tAA_ps = 13910, - .tWR_ps = 15000, - .tRCD_ps = 13910, - .tRRD_ps = 6000, - .tRP_ps = 13910, - .tRAS_ps = 34000, - .tRC_ps = 48910, - .tRFC_ps = 260000, - .tWTR_ps = 7500, - .tRTP_ps = 7500, + .tckmin_x_ps = 1071, + .caslat_x = 0x2fe << 4, /* 5,6,7,8,9,10,11,13 */ + .taa_ps = 13910, + .twr_ps = 15000, + .trcd_ps = 13910, + .trrd_ps = 6000, + .trp_ps = 13910, + .tras_ps = 34000, + .trc_ps = 48910, + .trfc_ps = 260000, + .twtr_ps = 7500, + .trtp_ps = 7500, .refresh_rate_ps = 7800000, - .tFAW_ps = 35000, + .tfaw_ps = 35000, }; int fsl_ddr_get_dimm_params(dimm_params_t *pdimm, @@ -71,7 +71,7 @@ struct board_specific_parameters { u32 wrlvl_ctl_3; u32 cpo; u32 write_data_delay; - u32 force_2T; + u32 force_2t; }; /* @@ -129,7 +129,7 @@ void fsl_ddr_board_options(memctl_options_t *popts, popts->wrlvl_start = pbsp->wrlvl_start; popts->wrlvl_ctl_2 = pbsp->wrlvl_ctl_2; popts->wrlvl_ctl_3 = pbsp->wrlvl_ctl_3; - popts->twoT_en = pbsp->force_2T; + popts->twot_en = pbsp->force_2t; goto found; } pbsp_highest = pbsp; @@ -146,7 +146,7 @@ void fsl_ddr_board_options(memctl_options_t *popts, popts->write_data_delay = pbsp_highest->write_data_delay; popts->clk_adjust = pbsp_highest->clk_adjust; popts->wrlvl_start = pbsp_highest->wrlvl_start; - popts->twoT_en = pbsp_highest->force_2T; + popts->twot_en = pbsp_highest->force_2t; } else { panic("DIMM is not supported by this board"); } diff --git a/board/freescale/b4860qds/eth_b4860qds.c b/board/freescale/b4860qds/eth_b4860qds.c index dc4ef80fc88..a8fc845193d 100644 --- a/board/freescale/b4860qds/eth_b4860qds.c +++ b/board/freescale/b4860qds/eth_b4860qds.c @@ -150,6 +150,8 @@ int board_eth_init(bd_t *bis) struct memac_mdio_info tg_memac_mdio_info; unsigned int i; unsigned int serdes1_prtcl, serdes2_prtcl; + int qsgmii; + struct mii_dev *bus; ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); serdes1_prtcl = in_be32(&gur->rcwsr[4]) & FSL_CORENET2_RCWSR4_SRDS1_PRTCL; @@ -281,6 +283,22 @@ int board_eth_init(bd_t *bis) break; } + /*set PHY address for QSGMII Riser Card on slot2*/ + bus = miiphy_get_dev_by_name(DEFAULT_FM_MDIO_NAME); + qsgmii = is_qsgmii_riser_card(bus, PHY_BASE_ADDR, PORT_NUM, REGNUM); + + if (qsgmii) { + switch (serdes2_prtcl) { + case 0xb2: + case 0x8d: + fm_info_set_phy_address(FM1_DTSEC3, PHY_BASE_ADDR); + fm_info_set_phy_address(FM1_DTSEC4, PHY_BASE_ADDR + 1); + break; + default: + break; + } + } + for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++) { int idx = i - FM1_DTSEC1; diff --git a/board/freescale/bsc9131rdb/ddr.c b/board/freescale/bsc9131rdb/ddr.c index c82fe0aab33..a9e92f2ae04 100644 --- a/board/freescale/bsc9131rdb/ddr.c +++ b/board/freescale/bsc9131rdb/ddr.c @@ -114,20 +114,20 @@ dimm_params_t ddr_raw_timing = { .edc_config = 0, .burst_lengths_bitmask = 0x0c, - .tCKmin_X_ps = 1870, - .caslat_X = 0x1e << 4, /* 5,6,7,8 */ - .tAA_ps = 13125, - .tWR_ps = 15000, - .tRCD_ps = 13125, - .tRRD_ps = 7500, - .tRP_ps = 13125, - .tRAS_ps = 37500, - .tRC_ps = 50625, - .tRFC_ps = 160000, - .tWTR_ps = 7500, - .tRTP_ps = 7500, + .tckmin_x_ps = 1870, + .caslat_x = 0x1e << 4, /* 5,6,7,8 */ + .taa_ps = 13125, + .twr_ps = 15000, + .trcd_ps = 13125, + .trrd_ps = 7500, + .trp_ps = 13125, + .tras_ps = 37500, + .trc_ps = 50625, + .trfc_ps = 160000, + .twtr_ps = 7500, + .trtp_ps = 7500, .refresh_rate_ps = 7800000, - .tFAW_ps = 37500, + .tfaw_ps = 37500, }; int fsl_ddr_get_dimm_params(dimm_params_t *pdimm, diff --git a/board/freescale/bsc9132qds/ddr.c b/board/freescale/bsc9132qds/ddr.c index fdea1931292..b3130be86de 100644 --- a/board/freescale/bsc9132qds/ddr.c +++ b/board/freescale/bsc9132qds/ddr.c @@ -136,20 +136,20 @@ dimm_params_t ddr_raw_timing = { .edc_config = 0, .burst_lengths_bitmask = 0x0c, - .tCKmin_X_ps = 1870, - .caslat_X = 0x1e << 4, /* 5,6,7,8 */ - .tAA_ps = 13125, - .tWR_ps = 15000, - .tRCD_ps = 13125, - .tRRD_ps = 7500, - .tRP_ps = 13125, - .tRAS_ps = 37500, - .tRC_ps = 50625, - .tRFC_ps = 160000, - .tWTR_ps = 7500, - .tRTP_ps = 7500, + .tckmin_x_ps = 1870, + .caslat_x = 0x1e << 4, /* 5,6,7,8 */ + .taa_ps = 13125, + .twr_ps = 15000, + .trcd_ps = 13125, + .trrd_ps = 7500, + .trp_ps = 13125, + .tras_ps = 37500, + .trc_ps = 50625, + .trfc_ps = 160000, + .twtr_ps = 7500, + .trtp_ps = 7500, .refresh_rate_ps = 7800000, - .tFAW_ps = 37500, + .tfaw_ps = 37500, }; int fsl_ddr_get_dimm_params(dimm_params_t *pdimm, diff --git a/board/freescale/c29xpcie/ddr.c b/board/freescale/c29xpcie/ddr.c index b017cfd9613..804ea1916d8 100644 --- a/board/freescale/c29xpcie/ddr.c +++ b/board/freescale/c29xpcie/ddr.c @@ -26,20 +26,20 @@ dimm_params_t ddr_raw_timing = { .edc_config = 2, .burst_lengths_bitmask = 0x0c, - .tCKmin_X_ps = 1650, - .caslat_X = 0x7e << 4, /* 5,6,7,8,9,10 */ - .tAA_ps = 14050, - .tWR_ps = 15000, - .tRCD_ps = 13500, - .tRRD_ps = 75000, - .tRP_ps = 13500, - .tRAS_ps = 40000, - .tRC_ps = 49500, - .tRFC_ps = 160000, - .tWTR_ps = 75000, - .tRTP_ps = 75000, + .tckmin_x_ps = 1650, + .caslat_x = 0x7e << 4, /* 5,6,7,8,9,10 */ + .taa_ps = 14050, + .twr_ps = 15000, + .trcd_ps = 13500, + .trrd_ps = 75000, + .trp_ps = 13500, + .tras_ps = 40000, + .trc_ps = 49500, + .trfc_ps = 160000, + .twtr_ps = 75000, + .trtp_ps = 75000, .refresh_rate_ps = 7800000, - .tFAW_ps = 30000, + .tfaw_ps = 30000, }; int fsl_ddr_get_dimm_params(dimm_params_t *pdimm, @@ -62,7 +62,7 @@ void fsl_ddr_board_options(memctl_options_t *popts, unsigned int ctrl_num) { int i; - popts->clk_adjust = 2; + popts->clk_adjust = 4; popts->cpo_override = 0x1f; popts->write_data_delay = 4; popts->half_strength_driver_enable = 1; diff --git a/board/freescale/c29xpcie/law.c b/board/freescale/c29xpcie/law.c index cd8fc2105d8..80e5fff7c5f 100644 --- a/board/freescale/c29xpcie/law.c +++ b/board/freescale/c29xpcie/law.c @@ -10,8 +10,8 @@ struct law_entry law_table[] = { SET_LAW(CONFIG_SYS_FLASH_BASE_PHYS, LAW_SIZE_64M, LAW_TRGT_IF_IFC), - SET_LAW(CONFIG_SYS_CPLD_BASE_PHYS, LAW_SIZE_4K, LAW_TRGT_IF_IFC), - SET_LAW(CONFIG_SYS_NAND_BASE_PHYS, LAW_SIZE_16K, LAW_TRGT_IF_IFC), + SET_LAW(CONFIG_SYS_CPLD_BASE_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_IFC), + SET_LAW(CONFIG_SYS_NAND_BASE_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_IFC), SET_LAW(CONFIG_SYS_PLATFORM_SRAM_BASE_PHYS, LAW_SIZE_512K, LAW_TRGT_IF_PLATFORM_SRAM), }; diff --git a/board/freescale/c29xpcie/tlb.c b/board/freescale/c29xpcie/tlb.c index ddd1ef80b2a..84844ee0f51 100644 --- a/board/freescale/c29xpcie/tlb.c +++ b/board/freescale/c29xpcie/tlb.c @@ -46,11 +46,11 @@ struct fsl_e_tlb_entry tlb_table[] = { SET_TLB_ENTRY(1, CONFIG_SYS_CPLD_BASE, CONFIG_SYS_CPLD_BASE_PHYS, MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 4, BOOKE_PAGESZ_4K, 1), + 0, 4, BOOKE_PAGESZ_64K, 1), SET_TLB_ENTRY(1, CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_BASE_PHYS, MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 5, BOOKE_PAGESZ_16K, 1), + 0, 5, BOOKE_PAGESZ_64K, 1), SET_TLB_ENTRY(1, CONFIG_SYS_PLATFORM_SRAM_BASE, CONFIG_SYS_PLATFORM_SRAM_BASE_PHYS, diff --git a/board/freescale/common/qixis.h b/board/freescale/common/qixis.h index 26e2eeb2ff5..d8fed14ce94 100644 --- a/board/freescale/common/qixis.h +++ b/board/freescale/common/qixis.h @@ -79,7 +79,9 @@ struct qixis { u8 clk_freq[6]; /* Clock Measurement Registers */ u8 res_c6[8]; u8 clk_base[2]; /* Clock Frequency Base Reg */ - u8 res_d0[16]; + u8 res_d0[8]; + u8 cms[2]; /* Core Management Space Address Register, 0xD8 */ + u8 res_c0[6]; u8 aux2[4]; /* Auxiliary Registers,0xE0 */ u8 res14[10]; u8 aux_ad; diff --git a/board/freescale/common/sys_eeprom.c b/board/freescale/common/sys_eeprom.c index d7893644cd4..9c18dd82424 100644 --- a/board/freescale/common/sys_eeprom.c +++ b/board/freescale/common/sys_eeprom.c @@ -18,7 +18,11 @@ #endif #ifdef CONFIG_SYS_I2C_EEPROM_NXID +/* some boards with non-256-bytes EEPROM have special define */ +/* for MAX_NUM_PORTS in board-specific file */ +#ifndef MAX_NUM_PORTS #define MAX_NUM_PORTS 23 +#endif #define NXID_VERSION 1 #endif diff --git a/board/freescale/corenet_ds/ddr.c b/board/freescale/corenet_ds/ddr.c index 517e87ff4c2..18e2ff617b4 100644 --- a/board/freescale/corenet_ds/ddr.c +++ b/board/freescale/corenet_ds/ddr.c @@ -114,7 +114,7 @@ struct board_specific_parameters { u32 wrlvl_start; u32 cpo; u32 write_data_delay; - u32 force_2T; + u32 force_2t; }; /* @@ -217,7 +217,7 @@ void fsl_ddr_board_options(memctl_options_t *popts, pbsp->write_data_delay; popts->clk_adjust = pbsp->clk_adjust; popts->wrlvl_start = pbsp->wrlvl_start; - popts->twoT_en = pbsp->force_2T; + popts->twot_en = pbsp->force_2t; goto found; } pbsp_highest = pbsp; @@ -234,7 +234,7 @@ void fsl_ddr_board_options(memctl_options_t *popts, popts->write_data_delay = pbsp_highest->write_data_delay; popts->clk_adjust = pbsp_highest->clk_adjust; popts->wrlvl_start = pbsp_highest->wrlvl_start; - popts->twoT_en = pbsp_highest->force_2T; + popts->twot_en = pbsp_highest->force_2t; } else { panic("DIMM is not supported by this board"); } diff --git a/board/freescale/corenet_ds/eth_hydra.c b/board/freescale/corenet_ds/eth_hydra.c index a594efcada7..35825c4ae94 100644 --- a/board/freescale/corenet_ds/eth_hydra.c +++ b/board/freescale/corenet_ds/eth_hydra.c @@ -76,6 +76,8 @@ #define BRDCFG2_REG_GPIO_SEL 0x20 +#define PHY_BASE_ADDR 0x00 + /* * BRDCFG1 mask and value for each MAC * @@ -365,6 +367,7 @@ int board_eth_init(bd_t *bis) struct tgec_mdio_info tgec_mdio_info; unsigned int i, slot; int lane; + struct mii_dev *bus; printf("Initializing Fman\n"); @@ -470,6 +473,9 @@ int board_eth_init(bd_t *bis) } } + bus = miiphy_get_dev_by_name("HYDRA_SGMII_MDIO"); + set_sgmii_phy(bus, FM1_DTSEC1, CONFIG_SYS_NUM_FM1_DTSEC, PHY_BASE_ADDR); + /* * For 10G, we only support one XAUI card per Fman. If present, then we * force its routing and never touch those bits again, which removes the diff --git a/board/freescale/corenet_ds/eth_p4080.c b/board/freescale/corenet_ds/eth_p4080.c index 597d0cbf2e0..e5beb551770 100644 --- a/board/freescale/corenet_ds/eth_p4080.c +++ b/board/freescale/corenet_ds/eth_p4080.c @@ -37,6 +37,9 @@ #define EMI1_MASK 0xc0000000 #define EMI2_MASK 0x30000000 +#define PHY_BASE_ADDR 0x00 +#define PHY_BASE_ADDR_SLOT5 0x10 + static int mdio_mux[NUM_FM_PORTS]; static char *mdio_names[16] = { @@ -290,6 +293,7 @@ int board_eth_init(bd_t *bis) int i; struct fsl_pq_mdio_info dtsec_mdio_info; struct tgec_mdio_info tgec_mdio_info; + struct mii_dev *bus; /* Initialize the mdio_mux array so we can recognize empty elements */ for (i = 0; i < NUM_FM_PORTS; i++) @@ -370,6 +374,9 @@ int board_eth_init(bd_t *bis) break; } } + bus = mii_dev_for_muxval(EMI1_SLOT5); + set_sgmii_phy(bus, FM1_DTSEC1, + CONFIG_SYS_NUM_FM1_DTSEC, PHY_BASE_ADDR_SLOT5); for (i = FM1_10GEC1; i < FM1_10GEC1 + CONFIG_SYS_NUM_FM1_10GEC; i++) { int idx = i - FM1_10GEC1, lane, slot; @@ -435,6 +442,11 @@ int board_eth_init(bd_t *bis) } } + bus = mii_dev_for_muxval(EMI1_SLOT3); + set_sgmii_phy(bus, FM2_DTSEC1, CONFIG_SYS_NUM_FM2_DTSEC, PHY_BASE_ADDR); + bus = mii_dev_for_muxval(EMI1_SLOT4); + set_sgmii_phy(bus, FM2_DTSEC1, CONFIG_SYS_NUM_FM2_DTSEC, PHY_BASE_ADDR); + for (i = FM2_10GEC1; i < FM2_10GEC1 + CONFIG_SYS_NUM_FM2_10GEC; i++) { int idx = i - FM2_10GEC1, lane, slot; switch (fm_info_get_enet_if(i)) { diff --git a/board/freescale/corenet_ds/eth_superhydra.c b/board/freescale/corenet_ds/eth_superhydra.c index fa07ff333ee..ad1bffd74bf 100644 --- a/board/freescale/corenet_ds/eth_superhydra.c +++ b/board/freescale/corenet_ds/eth_superhydra.c @@ -77,6 +77,12 @@ #define BRDCFG2_REG_GPIO_SEL 0x20 +/* SGMII */ +#define PHY_BASE_ADDR 0x00 +#define REGNUM 0x00 +#define PORT_NUM_FM1 0x04 +#define PORT_NUM_FM2 0x02 + /* * BRDCFG1 mask and value for each MAC * @@ -415,6 +421,9 @@ int board_eth_init(bd_t *bis) struct tgec_mdio_info tgec_mdio_info; unsigned int i, slot; int lane; + struct mii_dev *bus; + int qsgmii; + int phy_real_addr; ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); int srds_prtcl = (in_be32(&gur->rcwsr[4]) & FSL_CORENET_RCWSR4_SRDS_PRTCL) >> 26; @@ -449,6 +458,8 @@ int board_eth_init(bd_t *bis) "SUPER_HYDRA_FM1_SGMII_MDIO"); super_hydra_mdio_init(DEFAULT_FM_MDIO_NAME, "SUPER_HYDRA_FM2_SGMII_MDIO"); + super_hydra_mdio_init(DEFAULT_FM_MDIO_NAME, + "SUPER_HYDRA_FM3_SGMII_MDIO"); super_hydra_mdio_init(DEFAULT_FM_TGEC_MDIO_NAME, "SUPER_HYDRA_FM1_TGEC_MDIO"); super_hydra_mdio_init(DEFAULT_FM_TGEC_MDIO_NAME, @@ -573,6 +584,42 @@ int board_eth_init(bd_t *bis) } } + bus = miiphy_get_dev_by_name("SUPER_HYDRA_FM1_SGMII_MDIO"); + qsgmii = is_qsgmii_riser_card(bus, PHY_BASE_ADDR, PORT_NUM_FM1, REGNUM); + + if (qsgmii) { + for (i = FM1_DTSEC1; i < FM1_DTSEC1 + PORT_NUM_FM1; i++) { + if (fm_info_get_enet_if(i) == + PHY_INTERFACE_MODE_SGMII) { + phy_real_addr = PHY_BASE_ADDR + i - FM1_DTSEC1; + fm_info_set_phy_address(i, phy_real_addr); + } + } + switch (srds_prtcl) { + case 0x00: + case 0x03: + case 0x04: + case 0x06: + case 0x11: + case 0x2a: + case 0x34: + case 0x36: + fm_info_set_phy_address(FM1_DTSEC3, PHY_BASE_ADDR + 2); + fm_info_set_phy_address(FM1_DTSEC4, PHY_BASE_ADDR + 3); + break; + case 0x01: + case 0x02: + case 0x05: + case 0x07: + case 0x35: + fm_info_set_phy_address(FM1_DTSEC3, PHY_BASE_ADDR + 0); + fm_info_set_phy_address(FM1_DTSEC4, PHY_BASE_ADDR + 1); + break; + default: + break; + } + } + /* * For 10G, we only support one XAUI card per Fman. If present, then we * force its routing and never touch those bits again, which removes the @@ -638,10 +685,22 @@ int board_eth_init(bd_t *bis) break; }; - super_hydra_mdio_set_mux("SUPER_HYDRA_FM2_SGMII_MDIO", - mdio_mux[i].mask, mdio_mux[i].val); - fm_info_set_mdio(i, - miiphy_get_dev_by_name("SUPER_HYDRA_FM2_SGMII_MDIO")); + if (i == FM2_DTSEC1 || i == FM2_DTSEC2) { + super_hydra_mdio_set_mux( + "SUPER_HYDRA_FM3_SGMII_MDIO", + mdio_mux[i].mask, + mdio_mux[i].val); + fm_info_set_mdio(i, miiphy_get_dev_by_name( + "SUPER_HYDRA_FM3_SGMII_MDIO")); + } else { + super_hydra_mdio_set_mux( + "SUPER_HYDRA_FM2_SGMII_MDIO", + mdio_mux[i].mask, + mdio_mux[i].val); + fm_info_set_mdio(i, miiphy_get_dev_by_name( + "SUPER_HYDRA_FM2_SGMII_MDIO")); + } + break; case PHY_INTERFACE_MODE_RGMII: /* @@ -672,6 +731,11 @@ int board_eth_init(bd_t *bis) } } + bus = miiphy_get_dev_by_name("SUPER_HYDRA_FM2_SGMII_MDIO"); + set_sgmii_phy(bus, FM2_DTSEC3, PORT_NUM_FM2, PHY_BASE_ADDR); + bus = miiphy_get_dev_by_name("SUPER_HYDRA_FM3_SGMII_MDIO"); + set_sgmii_phy(bus, FM2_DTSEC1, PORT_NUM_FM2, PHY_BASE_ADDR); + /* * For 10G, we only support one XAUI card per Fman. If present, then we * force its routing and never touch those bits again, which removes the diff --git a/board/freescale/mpc8349emds/ddr.c b/board/freescale/mpc8349emds/ddr.c index c66750e2e39..3d257d0fbf2 100644 --- a/board/freescale/mpc8349emds/ddr.c +++ b/board/freescale/mpc8349emds/ddr.c @@ -15,7 +15,7 @@ struct board_specific_parameters { u32 clk_adjust; u32 cpo; u32 write_data_delay; - u32 force_2T; + u32 force_2t; }; /* @@ -70,7 +70,7 @@ void fsl_ddr_board_options(memctl_options_t *popts, popts->cpo_override = pbsp->cpo; popts->write_data_delay = pbsp->write_data_delay; - popts->twoT_en = pbsp->force_2T; + popts->twot_en = pbsp->force_2t; goto found; } pbsp_highest = pbsp; @@ -86,7 +86,7 @@ void fsl_ddr_board_options(memctl_options_t *popts, popts->clk_adjust = pbsp_highest->clk_adjust; popts->cpo_override = pbsp_highest->cpo; popts->write_data_delay = pbsp_highest->write_data_delay; - popts->twoT_en = pbsp_highest->force_2T; + popts->twot_en = pbsp_highest->force_2t; } else { panic("DIMM is not supported by this board"); } @@ -97,5 +97,5 @@ found: * - number of DIMMs installed */ popts->half_strength_driver_enable = 0; - popts->DQS_config = 0; /* only true DQS signal is used on board */ + popts->dqs_config = 0; /* only true DQS signal is used on board */ } diff --git a/board/freescale/mpc8540ads/ddr.c b/board/freescale/mpc8540ads/ddr.c index 571137443eb..9e798152783 100644 --- a/board/freescale/mpc8540ads/ddr.c +++ b/board/freescale/mpc8540ads/ddr.c @@ -36,7 +36,7 @@ void fsl_ddr_board_options(memctl_options_t *popts, popts->write_data_delay = 3; /* 2T timing enable */ - popts->twoT_en = 1; + popts->twot_en = 1; /* * Factors to consider for half-strength driver enable: diff --git a/board/freescale/mpc8544ds/ddr.c b/board/freescale/mpc8544ds/ddr.c index 94219b9471e..6cf9bc1d75f 100644 --- a/board/freescale/mpc8544ds/ddr.c +++ b/board/freescale/mpc8544ds/ddr.c @@ -49,7 +49,7 @@ void fsl_ddr_board_options(memctl_options_t *popts, popts->write_data_delay = 3; /* 2T timing enable */ - popts->twoT_en = 1; + popts->twot_en = 1; /* * Factors to consider for half-strength driver enable: diff --git a/board/freescale/mpc8560ads/ddr.c b/board/freescale/mpc8560ads/ddr.c index 571137443eb..9e798152783 100644 --- a/board/freescale/mpc8560ads/ddr.c +++ b/board/freescale/mpc8560ads/ddr.c @@ -36,7 +36,7 @@ void fsl_ddr_board_options(memctl_options_t *popts, popts->write_data_delay = 3; /* 2T timing enable */ - popts->twoT_en = 1; + popts->twot_en = 1; /* * Factors to consider for half-strength driver enable: diff --git a/board/freescale/mpc8572ds/ddr.c b/board/freescale/mpc8572ds/ddr.c index a7ff668b1b1..52e4f4224c7 100644 --- a/board/freescale/mpc8572ds/ddr.c +++ b/board/freescale/mpc8572ds/ddr.c @@ -17,7 +17,7 @@ struct board_specific_parameters { u32 clk_adjust; u32 cpo; u32 write_data_delay; - u32 force_2T; + u32 force_2t; }; /* @@ -139,7 +139,7 @@ void fsl_ddr_board_options(memctl_options_t *popts, popts->cpo_override = pbsp->cpo; popts->write_data_delay = pbsp->write_data_delay; - popts->twoT_en = pbsp->force_2T; + popts->twot_en = pbsp->force_2t; goto found; } pbsp_highest = pbsp; @@ -155,7 +155,7 @@ void fsl_ddr_board_options(memctl_options_t *popts, popts->clk_adjust = pbsp->clk_adjust; popts->cpo_override = pbsp->cpo; popts->write_data_delay = pbsp->write_data_delay; - popts->twoT_en = pbsp->force_2T; + popts->twot_en = pbsp->force_2t; } else { panic("DIMM is not supported by this board"); } diff --git a/board/freescale/mpc8610hpcd/ddr.c b/board/freescale/mpc8610hpcd/ddr.c index 94219b9471e..6cf9bc1d75f 100644 --- a/board/freescale/mpc8610hpcd/ddr.c +++ b/board/freescale/mpc8610hpcd/ddr.c @@ -49,7 +49,7 @@ void fsl_ddr_board_options(memctl_options_t *popts, popts->write_data_delay = 3; /* 2T timing enable */ - popts->twoT_en = 1; + popts->twot_en = 1; /* * Factors to consider for half-strength driver enable: diff --git a/board/freescale/mpc8641hpcn/ddr.c b/board/freescale/mpc8641hpcn/ddr.c index 5d3575738a1..651652a77d8 100644 --- a/board/freescale/mpc8641hpcn/ddr.c +++ b/board/freescale/mpc8641hpcn/ddr.c @@ -106,5 +106,5 @@ void fsl_ddr_board_options(memctl_options_t *popts, found: /* 2T timing enable */ - popts->twoT_en = 1; + popts->twot_en = 1; } diff --git a/board/freescale/p1010rdb/ddr.c b/board/freescale/p1010rdb/ddr.c index 681f052e41c..ab1b41d8320 100644 --- a/board/freescale/p1010rdb/ddr.c +++ b/board/freescale/p1010rdb/ddr.c @@ -172,20 +172,20 @@ dimm_params_t ddr_raw_timing = { .edc_config = 0, .burst_lengths_bitmask = 0x0c, - .tCKmin_X_ps = 1875, - .caslat_X = 0x1e << 4, /* 5,6,7,8 */ - .tAA_ps = 13125, - .tWR_ps = 15000, - .tRCD_ps = 13125, - .tRRD_ps = 7500, - .tRP_ps = 13125, - .tRAS_ps = 37500, - .tRC_ps = 50625, - .tRFC_ps = 160000, - .tWTR_ps = 7500, - .tRTP_ps = 7500, + .tckmin_x_ps = 1875, + .caslat_x = 0x1e << 4, /* 5,6,7,8 */ + .taa_ps = 13125, + .twr_ps = 15000, + .trcd_ps = 13125, + .trrd_ps = 7500, + .trp_ps = 13125, + .tras_ps = 37500, + .trc_ps = 50625, + .trfc_ps = 160000, + .twtr_ps = 7500, + .trtp_ps = 7500, .refresh_rate_ps = 7800000, - .tFAW_ps = 37500, + .tfaw_ps = 37500, }; int fsl_ddr_get_dimm_params(dimm_params_t *pdimm, diff --git a/board/freescale/p1010rdb/law.c b/board/freescale/p1010rdb/law.c index 004512725f0..ed41a056c59 100644 --- a/board/freescale/p1010rdb/law.c +++ b/board/freescale/p1010rdb/law.c @@ -9,11 +9,9 @@ #include <asm/mmu.h> struct law_entry law_table[] = { -#ifndef CONFIG_SDCARD SET_LAW(CONFIG_SYS_FLASH_BASE_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_IFC), SET_LAW(CONFIG_SYS_CPLD_BASE_PHYS, LAW_SIZE_128K, LAW_TRGT_IF_IFC), SET_LAW(CONFIG_SYS_NAND_BASE_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_IFC), -#endif }; int num_law_entries = ARRAY_SIZE(law_table); diff --git a/board/freescale/p1010rdb/p1010rdb.c b/board/freescale/p1010rdb/p1010rdb.c index 06aa8009b52..e940d2275e9 100644 --- a/board/freescale/p1010rdb/p1010rdb.c +++ b/board/freescale/p1010rdb/p1010rdb.c @@ -21,10 +21,8 @@ #include <asm/fsl_serdes.h> #include <asm/fsl_ifc.h> #include <asm/fsl_pci.h> - -#ifndef CONFIG_SDCARD #include <hwconfig.h> -#endif +#include <i2c.h> DECLARE_GLOBAL_DATA_PTR; @@ -33,10 +31,30 @@ DECLARE_GLOBAL_DATA_PTR; #define MUX_CPLD_TDM 0x01 #define MUX_CPLD_SPICS0_FLASH 0x00 #define MUX_CPLD_SPICS0_SLIC 0x02 +#define PMUXCR1_IFC_MASK 0x00ffff00 +#define PMUXCR1_SDHC_MASK 0x00fff000 +#define PMUXCR1_SDHC_ENABLE 0x00555000 + +enum { + MUX_TYPE_IFC, + MUX_TYPE_SDHC, + MUX_TYPE_SPIFLASH, + MUX_TYPE_TDM, + MUX_TYPE_CAN, + MUX_TYPE_CS0_NOR, + MUX_TYPE_CS0_NAND, +}; + +enum { + I2C_READ_BANK, + I2C_READ_PCB_VER, +}; + +static uint sd_ifc_mux; -#ifndef CONFIG_SDCARD struct cpld_data { u8 cpld_ver; /* cpld revision */ +#if defined(CONFIG_P1010RDB_PA) u8 pcba_ver; /* pcb revision number */ u8 twindie_ddr3; u8 res1[6]; @@ -51,53 +69,18 @@ struct cpld_data { u8 por1; /* POR Options */ u8 por2; /* POR Options */ u8 por3; /* POR Options */ -}; - -void cpld_show(void) -{ - struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE); - - printf("CPLD: V%x.%x PCBA: V%x.0\n", - in_8(&cpld_data->cpld_ver) & 0xF0, - in_8(&cpld_data->cpld_ver) & 0x0F, - in_8(&cpld_data->pcba_ver) & 0x0F); - -#ifdef CONFIG_DEBUG - printf("twindie_ddr =%x\n", - in_8(&cpld_data->twindie_ddr3)); - printf("bank_sel =%x\n", - in_8(&cpld_data->bank_sel)); - printf("usb2_sel =%x\n", - in_8(&cpld_data->usb2_sel)); - printf("porsw_sel =%x\n", - in_8(&cpld_data->porsw_sel)); - printf("tdm_can_sel =%x\n", - in_8(&cpld_data->tdm_can_sel)); - printf("tdm_can_sel =%x\n", - in_8(&cpld_data->tdm_can_sel)); - printf("spi_cs0_sel =%x\n", - in_8(&cpld_data->spi_cs0_sel)); - printf("bcsr0 =%x\n", - in_8(&cpld_data->bcsr0)); - printf("bcsr1 =%x\n", - in_8(&cpld_data->bcsr1)); - printf("bcsr2 =%x\n", - in_8(&cpld_data->bcsr2)); - printf("bcsr3 =%x\n", - in_8(&cpld_data->bcsr3)); -#endif -} +#elif defined(CONFIG_P1010RDB_PB) + u8 rom_loc; #endif +}; int board_early_init_f(void) { ccsr_gpio_t *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO_ADDR); -#ifndef CONFIG_SDCARD struct fsl_ifc *ifc = (void *)CONFIG_SYS_IFC_ADDR; /* Clock configuration to access CPLD using IFC(GPCM) */ setbits_be32(&ifc->ifc_gcr, 1 << IFC_GCR_TBCTL_TRN_TIME_SHIFT); -#endif /* * Reset PCIe slots via GPIO4 */ @@ -109,7 +92,6 @@ int board_early_init_f(void) int board_early_init_r(void) { -#ifndef CONFIG_SDCARD const unsigned int flashbase = CONFIG_SYS_FLASH_BASE; const u8 flash_esel = find_tlb_idx((void *)flashbase, 1); @@ -133,7 +115,6 @@ int board_early_init_r(void) CONFIG_SYS_FLASH_BASE_PHYS + 0x1000000, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, flash_esel+1, BOOKE_PAGESZ_16M, 1); -#endif return 0; } @@ -144,13 +125,199 @@ void pci_init_board(void) } #endif /* ifdef CONFIG_PCI */ +int config_board_mux(int ctrl_type) +{ + ccsr_gur_t __iomem *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + u8 tmp; + +#if defined(CONFIG_P1010RDB_PA) + struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE); + + switch (ctrl_type) { + case MUX_TYPE_IFC: + i2c_set_bus_num(I2C_PCA9557_BUS_NUM); + tmp = 0xf0; + i2c_write(I2C_PCA9557_ADDR1, 3, 1, &tmp, 1); + tmp = 0x01; + i2c_write(I2C_PCA9557_ADDR1, 1, 1, &tmp, 1); + sd_ifc_mux = MUX_TYPE_IFC; + clrbits_be32(&gur->pmuxcr, PMUXCR1_IFC_MASK); + break; + case MUX_TYPE_SDHC: + i2c_set_bus_num(I2C_PCA9557_BUS_NUM); + tmp = 0xf0; + i2c_write(I2C_PCA9557_ADDR1, 3, 1, &tmp, 1); + tmp = 0x05; + i2c_write(I2C_PCA9557_ADDR1, 1, 1, &tmp, 1); + sd_ifc_mux = MUX_TYPE_SDHC; + clrsetbits_be32(&gur->pmuxcr, PMUXCR1_SDHC_MASK, + PMUXCR1_SDHC_ENABLE); + break; + case MUX_TYPE_SPIFLASH: + out_8(&cpld_data->spi_cs0_sel, MUX_CPLD_SPICS0_FLASH); + break; + case MUX_TYPE_TDM: + out_8(&cpld_data->tdm_can_sel, MUX_CPLD_TDM); + out_8(&cpld_data->spi_cs0_sel, MUX_CPLD_SPICS0_SLIC); + break; + case MUX_TYPE_CAN: + out_8(&cpld_data->tdm_can_sel, MUX_CPLD_CAN_UART); + break; + default: + break; + } +#elif defined(CONFIG_P1010RDB_PB) + uint orig_bus = i2c_get_bus_num(); + i2c_set_bus_num(I2C_PCA9557_BUS_NUM); + + switch (ctrl_type) { + case MUX_TYPE_IFC: + i2c_read(I2C_PCA9557_ADDR2, 0, 1, &tmp, 1); + clrbits_8(&tmp, 0x04); + i2c_write(I2C_PCA9557_ADDR2, 1, 1, &tmp, 1); + i2c_read(I2C_PCA9557_ADDR2, 3, 1, &tmp, 1); + clrbits_8(&tmp, 0x04); + i2c_write(I2C_PCA9557_ADDR2, 3, 1, &tmp, 1); + sd_ifc_mux = MUX_TYPE_IFC; + clrbits_be32(&gur->pmuxcr, PMUXCR1_IFC_MASK); + break; + case MUX_TYPE_SDHC: + i2c_read(I2C_PCA9557_ADDR2, 0, 1, &tmp, 1); + setbits_8(&tmp, 0x04); + i2c_write(I2C_PCA9557_ADDR2, 1, 1, &tmp, 1); + i2c_read(I2C_PCA9557_ADDR2, 3, 1, &tmp, 1); + clrbits_8(&tmp, 0x04); + i2c_write(I2C_PCA9557_ADDR2, 3, 1, &tmp, 1); + sd_ifc_mux = MUX_TYPE_SDHC; + clrsetbits_be32(&gur->pmuxcr, PMUXCR1_SDHC_MASK, + PMUXCR1_SDHC_ENABLE); + break; + case MUX_TYPE_SPIFLASH: + i2c_read(I2C_PCA9557_ADDR2, 0, 1, &tmp, 1); + clrbits_8(&tmp, 0x80); + i2c_write(I2C_PCA9557_ADDR2, 1, 1, &tmp, 1); + i2c_read(I2C_PCA9557_ADDR2, 3, 1, &tmp, 1); + clrbits_8(&tmp, 0x80); + i2c_write(I2C_PCA9557_ADDR2, 3, 1, &tmp, 1); + break; + case MUX_TYPE_TDM: + i2c_read(I2C_PCA9557_ADDR2, 0, 1, &tmp, 1); + setbits_8(&tmp, 0x82); + i2c_write(I2C_PCA9557_ADDR2, 1, 1, &tmp, 1); + i2c_read(I2C_PCA9557_ADDR2, 3, 1, &tmp, 1); + clrbits_8(&tmp, 0x82); + i2c_write(I2C_PCA9557_ADDR2, 3, 1, &tmp, 1); + break; + case MUX_TYPE_CAN: + i2c_read(I2C_PCA9557_ADDR2, 0, 1, &tmp, 1); + clrbits_8(&tmp, 0x02); + i2c_write(I2C_PCA9557_ADDR2, 1, 1, &tmp, 1); + i2c_read(I2C_PCA9557_ADDR2, 3, 1, &tmp, 1); + clrbits_8(&tmp, 0x02); + i2c_write(I2C_PCA9557_ADDR2, 3, 1, &tmp, 1); + break; + case MUX_TYPE_CS0_NOR: + i2c_read(I2C_PCA9557_ADDR2, 0, 1, &tmp, 1); + clrbits_8(&tmp, 0x08); + i2c_write(I2C_PCA9557_ADDR2, 1, 1, &tmp, 1); + i2c_read(I2C_PCA9557_ADDR2, 3, 1, &tmp, 1); + clrbits_8(&tmp, 0x08); + i2c_write(I2C_PCA9557_ADDR2, 3, 1, &tmp, 1); + break; + case MUX_TYPE_CS0_NAND: + i2c_read(I2C_PCA9557_ADDR2, 0, 1, &tmp, 1); + setbits_8(&tmp, 0x08); + i2c_write(I2C_PCA9557_ADDR2, 1, 1, &tmp, 1); + i2c_read(I2C_PCA9557_ADDR2, 3, 1, &tmp, 1); + clrbits_8(&tmp, 0x08); + i2c_write(I2C_PCA9557_ADDR2, 3, 1, &tmp, 1); + break; + default: + break; + } + i2c_set_bus_num(orig_bus); +#endif + return 0; +} + +#ifdef CONFIG_P1010RDB_PB +int i2c_pca9557_read(int type) +{ + u8 val; + + i2c_set_bus_num(I2C_PCA9557_BUS_NUM); + i2c_read(I2C_PCA9557_ADDR2, 0, 1, &val, 1); + + switch (type) { + case I2C_READ_BANK: + val = (val & 0x10) >> 4; + break; + case I2C_READ_PCB_VER: + val = ((val & 0x60) >> 5) + 1; + break; + default: + break; + } + + return val; +} +#endif + int checkboard(void) { struct cpu_type *cpu; + struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE); + u8 val; cpu = gd->arch.cpu; - printf("Board: %sRDB\n", cpu->name); +#if defined(CONFIG_P1010RDB_PA) + printf("Board: %sRDB-PA, ", cpu->name); +#elif defined(CONFIG_P1010RDB_PB) + printf("Board: %sRDB-PB, ", cpu->name); + i2c_set_bus_num(I2C_PCA9557_BUS_NUM); + i2c_init(CONFIG_SYS_FSL_I2C_SPEED, CONFIG_SYS_FSL_I2C_SLAVE); + val = 0x0; /* no polarity inversion */ + i2c_write(I2C_PCA9557_ADDR2, 2, 1, &val, 1); +#endif +#ifdef CONFIG_SDCARD + /* switch to IFC to read info from CPLD */ + config_board_mux(MUX_TYPE_IFC); +#endif + +#if defined(CONFIG_P1010RDB_PA) + val = (in_8(&cpld_data->pcba_ver) & 0xf); + printf("PCB: v%x.0\n", val); +#elif defined(CONFIG_P1010RDB_PB) + val = in_8(&cpld_data->cpld_ver); + printf("CPLD: v%x.%x, ", val >> 4, val & 0xf); + printf("PCB: v%x.0, ", i2c_pca9557_read(I2C_READ_PCB_VER)); + val = in_8(&cpld_data->rom_loc) & 0xf; + puts("Boot from: "); + switch (val) { + case 0xf: + config_board_mux(MUX_TYPE_CS0_NOR); + printf("NOR vBank%d\n", i2c_pca9557_read(I2C_READ_BANK)); + break; + case 0xe: + puts("SDHC\n"); + val = 0x60; /* set pca9557 pin input/output */ + i2c_write(I2C_PCA9557_ADDR2, 3, 1, &val, 1); + break; + case 0x5: + config_board_mux(MUX_TYPE_IFC); + config_board_mux(MUX_TYPE_CS0_NAND); + puts("NAND\n"); + break; + case 0x6: + config_board_mux(MUX_TYPE_IFC); + puts("SPI\n"); + break; + default: + puts("unknown\n"); + break; + } +#endif return 0; } @@ -246,6 +413,16 @@ void fdt_del_sdhc(void *blob) } } +void fdt_del_ifc(void *blob) +{ + int nodeoff = 0; + + while ((nodeoff = fdt_node_offset_by_compatible(blob, 0, + "fsl,ifc")) >= 0) { + fdt_del_node(blob, nodeoff); + } +} + void fdt_disable_uart1(void *blob) { int nodeoff; @@ -289,9 +466,13 @@ void ft_board_setup(void *blob, bd_t *bd) fdt_del_flexcan(blob); fdt_del_node_and_alias(blob, "ethernet2"); } -#ifndef CONFIG_SDCARD - /* disable sdhc due to sdhc bug */ - fdt_del_sdhc(blob); + + /* Delete IFC node as IFC pins are multiplexing with SDHC */ + if (sd_ifc_mux != MUX_TYPE_IFC) + fdt_del_ifc(blob); + else + fdt_del_sdhc(blob); + if (hwconfig_subarg_cmp("fsl_p1010mux", "tdm_can", "can")) { fdt_del_tdm(blob); fdt_del_spi_slic(blob); @@ -309,14 +490,27 @@ void ft_board_setup(void *blob, bd_t *bd) fdt_del_flexcan(blob); fdt_disable_uart1(blob); } +} #endif + +#ifdef CONFIG_SDCARD +int board_mmc_init(bd_t *bis) +{ + config_board_mux(MUX_TYPE_SDHC); + return -1; +} +#else +void board_reset(void) +{ + /* mux to IFC to enable CPLD for reset */ + if (sd_ifc_mux != MUX_TYPE_IFC) + config_board_mux(MUX_TYPE_IFC); } #endif -#ifndef CONFIG_SDCARD + int misc_init_r(void) { - struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE); ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); if (hwconfig_subarg_cmp("fsl_p1010mux", "tdm_can", "can")) { @@ -324,7 +518,7 @@ int misc_init_r(void) MPC85xx_PMUXCR_CAN1_UART | MPC85xx_PMUXCR_CAN2_TDM | MPC85xx_PMUXCR_CAN2_UART); - out_8(&cpld_data->tdm_can_sel, MUX_CPLD_CAN_UART); + config_board_mux(MUX_TYPE_CAN); } else if (hwconfig_subarg_cmp("fsl_p1010mux", "tdm_can", "tdm")) { clrbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_CAN2_UART | MPC85xx_PMUXCR_CAN1_UART); @@ -332,13 +526,39 @@ int misc_init_r(void) MPC85xx_PMUXCR_CAN1_TDM); clrbits_be32(&gur->pmuxcr2, MPC85xx_PMUXCR2_UART_GPIO); setbits_be32(&gur->pmuxcr2, MPC85xx_PMUXCR2_UART_TDM); - out_8(&cpld_data->tdm_can_sel, MUX_CPLD_TDM); - out_8(&cpld_data->spi_cs0_sel, MUX_CPLD_SPICS0_SLIC); + config_board_mux(MUX_TYPE_TDM); } else { /* defaultly spi_cs_sel to flash */ - out_8(&cpld_data->spi_cs0_sel, MUX_CPLD_SPICS0_FLASH); + config_board_mux(MUX_TYPE_SPIFLASH); } + if (hwconfig("esdhc")) + config_board_mux(MUX_TYPE_SDHC); + else if (hwconfig("ifc")) + config_board_mux(MUX_TYPE_IFC); + +#ifdef CONFIG_P1010RDB_PB + setbits_be32(&gur->pmuxcr2, MPC85xx_PMUXCR2_GPIO01_DRVVBUS); +#endif return 0; } -#endif + +static int pin_mux_cmd(cmd_tbl_t *cmdtp, int flag, int argc, + char * const argv[]) +{ + if (argc < 2) + return CMD_RET_USAGE; + if (strcmp(argv[1], "ifc") == 0) + config_board_mux(MUX_TYPE_IFC); + else if (strcmp(argv[1], "sdhc") == 0) + config_board_mux(MUX_TYPE_SDHC); + else + return CMD_RET_USAGE; + return 0; +} + +U_BOOT_CMD( + mux, 2, 0, pin_mux_cmd, + "configure multiplexing pin for IFC/SDHC bus in runtime", + "bus_type (e.g. mux sdhc)" +); diff --git a/board/freescale/p1010rdb/tlb.c b/board/freescale/p1010rdb/tlb.c index 77a80435a2a..a7af0f67566 100644 --- a/board/freescale/p1010rdb/tlb.c +++ b/board/freescale/p1010rdb/tlb.c @@ -42,7 +42,6 @@ struct fsl_e_tlb_entry tlb_table[] = { 0, 1, BOOKE_PAGESZ_1M, 1), #ifndef CONFIG_SPL_BUILD -#ifndef CONFIG_SDCARD SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE_PHYS, MAS3_SX|MAS3_SR, MAS2_W|MAS2_G, 0, 2, BOOKE_PAGESZ_16M, 1), @@ -51,7 +50,6 @@ struct fsl_e_tlb_entry tlb_table[] = { CONFIG_SYS_FLASH_BASE_PHYS + 0x1000000, MAS3_SX|MAS3_SR, MAS2_W|MAS2_G, 0, 3, BOOKE_PAGESZ_16M, 1), -#endif #ifdef CONFIG_PCI /* *I*G* - PCI */ @@ -66,7 +64,6 @@ struct fsl_e_tlb_entry tlb_table[] = { #endif #endif -#ifndef CONFIG_SDCARD /* *I*G - Board CPLD */ SET_TLB_ENTRY(1, CONFIG_SYS_CPLD_BASE, CONFIG_SYS_CPLD_BASE_PHYS, MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, @@ -75,7 +72,6 @@ struct fsl_e_tlb_entry tlb_table[] = { SET_TLB_ENTRY(1, CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_BASE_PHYS, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 7, BOOKE_PAGESZ_1M, 1), -#endif #if defined(CONFIG_SYS_RAMBOOT) || defined(CONFIG_SPL) SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE, diff --git a/board/freescale/p1022ds/ddr.c b/board/freescale/p1022ds/ddr.c index a639861dae1..94d2c2b0dbd 100644 --- a/board/freescale/p1022ds/ddr.c +++ b/board/freescale/p1022ds/ddr.c @@ -17,7 +17,7 @@ struct board_specific_parameters { u32 clk_adjust; /* Range: 0-8 */ u32 cpo; /* Range: 2-31 */ u32 write_data_delay; /* Range: 0-6 */ - u32 force_2T; + u32 force_2t; }; /* @@ -72,7 +72,7 @@ void fsl_ddr_board_options(memctl_options_t *popts, dimm_params_t *pdimm, popts->cpo_override = pbsp->cpo; popts->write_data_delay = pbsp->write_data_delay; - popts->twoT_en = pbsp->force_2T; + popts->twot_en = pbsp->force_2t; goto found; } pbsp_highest = pbsp; @@ -88,7 +88,7 @@ void fsl_ddr_board_options(memctl_options_t *popts, dimm_params_t *pdimm, popts->clk_adjust = pbsp->clk_adjust; popts->cpo_override = pbsp->cpo; popts->write_data_delay = pbsp->write_data_delay; - popts->twoT_en = pbsp->force_2T; + popts->twot_en = pbsp->force_2t; } else { panic("DIMM is not supported by this board"); } diff --git a/board/freescale/p1023rdb/ddr.c b/board/freescale/p1023rdb/ddr.c index f027885100f..9fb61fdab36 100644 --- a/board/freescale/p1023rdb/ddr.c +++ b/board/freescale/p1023rdb/ddr.c @@ -33,20 +33,20 @@ dimm_params_t ddr_raw_timing = { .edc_config = 0, .burst_lengths_bitmask = 0x0c, - .tCKmin_X_ps = 1875, - .caslat_X = 0x1e << 4, /* 5,6,7,8 */ - .tAA_ps = 13125, - .tWR_ps = 18000, - .tRCD_ps = 13125, - .tRRD_ps = 7500, - .tRP_ps = 13125, - .tRAS_ps = 37500, - .tRC_ps = 50625, - .tRFC_ps = 160000, - .tWTR_ps = 7500, - .tRTP_ps = 7500, + .tckmin_x_ps = 1875, + .caslat_x = 0x1e << 4, /* 5,6,7,8 */ + .taa_ps = 13125, + .twr_ps = 18000, + .trcd_ps = 13125, + .trrd_ps = 7500, + .trp_ps = 13125, + .tras_ps = 37500, + .trc_ps = 50625, + .trfc_ps = 160000, + .twtr_ps = 7500, + .trtp_ps = 7500, .refresh_rate_ps = 7800000, - .tFAW_ps = 37500, + .tfaw_ps = 37500, }; int fsl_ddr_get_dimm_params(dimm_params_t *pdimm, diff --git a/board/freescale/p1_p2_rdb_pc/Makefile b/board/freescale/p1_p2_rdb_pc/Makefile index f8d0b35aba2..202b4a5ba09 100644 --- a/board/freescale/p1_p2_rdb_pc/Makefile +++ b/board/freescale/p1_p2_rdb_pc/Makefile @@ -21,6 +21,9 @@ ifdef MINIMAL COBJS-y += spl_minimal.o tlb.o law.o else +ifdef CONFIG_SPL_BUILD +COBJS-y += spl.o +endif COBJS-y += $(BOARD).o COBJS-y += ddr.o diff --git a/board/freescale/p1_p2_rdb_pc/ddr.c b/board/freescale/p1_p2_rdb_pc/ddr.c index c0b72e035e9..81cc0930bc2 100644 --- a/board/freescale/p1_p2_rdb_pc/ddr.c +++ b/board/freescale/p1_p2_rdb_pc/ddr.c @@ -34,20 +34,20 @@ dimm_params_t ddr_raw_timing = { .edc_config = 0, .burst_lengths_bitmask = 0x0c, - .tCKmin_X_ps = 1870, - .caslat_X = 0x1e << 4, /* 5,6,7,8 */ - .tAA_ps = 13125, - .tWR_ps = 15000, - .tRCD_ps = 13125, - .tRRD_ps = 7500, - .tRP_ps = 13125, - .tRAS_ps = 37500, - .tRC_ps = 50625, - .tRFC_ps = 160000, - .tWTR_ps = 7500, - .tRTP_ps = 7500, + .tckmin_x_ps = 1870, + .caslat_x = 0x1e << 4, /* 5,6,7,8 */ + .taa_ps = 13125, + .twr_ps = 15000, + .trcd_ps = 13125, + .trrd_ps = 7500, + .trp_ps = 13125, + .tras_ps = 37500, + .trc_ps = 50625, + .trfc_ps = 160000, + .twtr_ps = 7500, + .trtp_ps = 7500, .refresh_rate_ps = 7800000, - .tFAW_ps = 37500, + .tfaw_ps = 37500, }; #elif defined(CONFIG_P2020RDB) /* Micron MT41J128M16_15E */ @@ -65,20 +65,20 @@ dimm_params_t ddr_raw_timing = { .edc_config = 0, .burst_lengths_bitmask = 0x0c, - .tCKmin_X_ps = 1500, - .caslat_X = 0x7e << 4, /* 5,6,7,8,9,10 */ - .tAA_ps = 13500, - .tWR_ps = 15000, - .tRCD_ps = 13500, - .tRRD_ps = 6000, - .tRP_ps = 13500, - .tRAS_ps = 36000, - .tRC_ps = 49500, - .tRFC_ps = 160000, - .tWTR_ps = 7500, - .tRTP_ps = 7500, + .tckmin_x_ps = 1500, + .caslat_x = 0x7e << 4, /* 5,6,7,8,9,10 */ + .taa_ps = 13500, + .twr_ps = 15000, + .trcd_ps = 13500, + .trrd_ps = 6000, + .trp_ps = 13500, + .tras_ps = 36000, + .trc_ps = 49500, + .trfc_ps = 160000, + .twtr_ps = 7500, + .trtp_ps = 7500, .refresh_rate_ps = 7800000, - .tFAW_ps = 30000, + .tfaw_ps = 30000, }; #elif (defined(CONFIG_P1020MBG) || defined(CONFIG_P1020RDB_PD)) /* Micron MT41J512M8_187E */ @@ -96,20 +96,20 @@ dimm_params_t ddr_raw_timing = { .edc_config = 0, .burst_lengths_bitmask = 0x0c, - .tCKmin_X_ps = 1870, - .caslat_X = 0x1e << 4, /* 5,6,7,8 */ - .tAA_ps = 13125, - .tWR_ps = 15000, - .tRCD_ps = 13125, - .tRRD_ps = 7500, - .tRP_ps = 13125, - .tRAS_ps = 37500, - .tRC_ps = 50625, - .tRFC_ps = 160000, - .tWTR_ps = 7500, - .tRTP_ps = 7500, + .tckmin_x_ps = 1870, + .caslat_x = 0x1e << 4, /* 5,6,7,8 */ + .taa_ps = 13125, + .twr_ps = 15000, + .trcd_ps = 13125, + .trrd_ps = 7500, + .trp_ps = 13125, + .tras_ps = 37500, + .trc_ps = 50625, + .trfc_ps = 160000, + .twtr_ps = 7500, + .trtp_ps = 7500, .refresh_rate_ps = 7800000, - .tFAW_ps = 37500, + .tfaw_ps = 37500, }; #elif defined(CONFIG_P1020RDB_PC) /* @@ -133,20 +133,20 @@ dimm_params_t ddr_raw_timing = { .edc_config = 0, .burst_lengths_bitmask = 0x0c, - .tCKmin_X_ps = 1875, - .caslat_X = 0x1e << 4, /* 5,6,7,8 */ - .tAA_ps = 13125, - .tWR_ps = 15000, - .tRCD_ps = 13125, - .tRRD_ps = 7500, - .tRP_ps = 13125, - .tRAS_ps = 37500, - .tRC_ps = 50625, - .tRFC_ps = 160000, - .tWTR_ps = 7500, - .tRTP_ps = 7500, + .tckmin_x_ps = 1875, + .caslat_x = 0x1e << 4, /* 5,6,7,8 */ + .taa_ps = 13125, + .twr_ps = 15000, + .trcd_ps = 13125, + .trrd_ps = 7500, + .trp_ps = 13125, + .tras_ps = 37500, + .trc_ps = 50625, + .trfc_ps = 160000, + .twtr_ps = 7500, + .trtp_ps = 7500, .refresh_rate_ps = 7800000, - .tFAW_ps = 37500, + .tfaw_ps = 37500, }; #elif defined(CONFIG_P1024RDB) || \ defined(CONFIG_P1025RDB) @@ -171,20 +171,20 @@ dimm_params_t ddr_raw_timing = { .edc_config = 0, .burst_lengths_bitmask = 0x0c, - .tCKmin_X_ps = 1500, - .caslat_X = 0x3e << 4, /* 5,6,7,8,9 */ - .tAA_ps = 13125, - .tWR_ps = 15000, - .tRCD_ps = 13125, - .tRRD_ps = 6000, - .tRP_ps = 13125, - .tRAS_ps = 36000, - .tRC_ps = 49125, - .tRFC_ps = 160000, - .tWTR_ps = 7500, - .tRTP_ps = 7500, + .tckmin_x_ps = 1500, + .caslat_x = 0x3e << 4, /* 5,6,7,8,9 */ + .taa_ps = 13125, + .twr_ps = 15000, + .trcd_ps = 13125, + .trrd_ps = 6000, + .trp_ps = 13125, + .tras_ps = 36000, + .trc_ps = 49125, + .trfc_ps = 160000, + .twtr_ps = 7500, + .trtp_ps = 7500, .refresh_rate_ps = 7800000, - .tFAW_ps = 30000, + .tfaw_ps = 30000, }; #else #error Missing raw timing data for this board diff --git a/board/freescale/p1_p2_rdb_pc/spl.c b/board/freescale/p1_p2_rdb_pc/spl.c new file mode 100644 index 00000000000..9bb071692d5 --- /dev/null +++ b/board/freescale/p1_p2_rdb_pc/spl.c @@ -0,0 +1,122 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <ns16550.h> +#include <malloc.h> +#include <mmc.h> +#include <nand.h> +#include <i2c.h> +#include <fsl_esdhc.h> +#include <spi_flash.h> + +DECLARE_GLOBAL_DATA_PTR; + +static const u32 sysclk_tbl[] = { + 66666000, 7499900, 83332500, 8999900, + 99999000, 11111000, 12499800, 13333200 +}; + +ulong get_effective_memsize(void) +{ + return CONFIG_SYS_L2_SIZE; +} + +void board_init_f(ulong bootflag) +{ + u32 plat_ratio, bus_clk; + ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR; + + console_init_f(); + + /* Set pmuxcr to allow both i2c1 and i2c2 */ + setbits_be32(&gur->pmuxcr, in_be32(&gur->pmuxcr) | 0x1000); + setbits_be32(&gur->pmuxcr, + in_be32(&gur->pmuxcr) | MPC85xx_PMUXCR_SD_DATA); + + /* Read back the register to synchronize the write. */ + in_be32(&gur->pmuxcr); + +#ifdef CONFIG_SPL_SPI_BOOT + clrbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_SD_DATA); +#endif + + /* initialize selected port with appropriate baud rate */ + plat_ratio = in_be32(&gur->porpllsr) & MPC85xx_PORPLLSR_PLAT_RATIO; + plat_ratio >>= 1; + bus_clk = CONFIG_SYS_CLK_FREQ * plat_ratio; + gd->bus_clk = bus_clk; + + NS16550_init((NS16550_t)CONFIG_SYS_NS16550_COM1, + bus_clk / 16 / CONFIG_BAUDRATE); +#ifdef CONFIG_SPL_MMC_BOOT + puts("\nSD boot...\n"); +#elif defined(CONFIG_SPL_SPI_BOOT) + puts("\nSPI Flash boot...\n"); +#endif + + /* copy code to RAM and jump to it - this should not return */ + /* NOTE - code has to be copied out of NAND buffer before + * other blocks can be read. + */ + relocate_code(CONFIG_SPL_RELOC_STACK, 0, CONFIG_SPL_RELOC_TEXT_BASE); +} + +void board_init_r(gd_t *gd, ulong dest_addr) +{ + /* Pointer is writable since we allocated a register for it */ + gd = (gd_t *)CONFIG_SPL_GD_ADDR; + bd_t *bd; + + memset(gd, 0, sizeof(gd_t)); + bd = (bd_t *)(CONFIG_SPL_GD_ADDR + sizeof(gd_t)); + memset(bd, 0, sizeof(bd_t)); + gd->bd = bd; + bd->bi_memstart = CONFIG_SYS_INIT_L2_ADDR; + bd->bi_memsize = CONFIG_SYS_L2_SIZE; + + probecpu(); + get_clocks(); + mem_malloc_init(CONFIG_SPL_RELOC_MALLOC_ADDR, + CONFIG_SPL_RELOC_MALLOC_SIZE); + +#ifndef CONFIG_SPL_NAND_BOOT + env_init(); +#endif +#ifdef CONFIG_SPL_MMC_BOOT + mmc_initialize(bd); +#endif + /* relocate environment function pointers etc. */ +#ifdef CONFIG_SPL_NAND_BOOT + nand_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE, + (uchar *)CONFIG_ENV_ADDR); + gd->env_addr = (ulong)(CONFIG_ENV_ADDR); + gd->env_valid = 1; +#else + env_relocate(); +#endif + +#ifdef CONFIG_SYS_I2C + i2c_init_all(); +#else + i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); +#endif + + gd->ram_size = initdram(0); +#ifdef CONFIG_SPL_NAND_BOOT + puts("Tertiary program loader running in sram..."); +#else + puts("Second program loader running in sram...\n"); +#endif + +#ifdef CONFIG_SPL_MMC_BOOT + mmc_boot(); +#elif defined(CONFIG_SPL_SPI_BOOT) + spi_boot(); +#elif defined(CONFIG_SPL_NAND_BOOT) + nand_boot(); +#endif +} diff --git a/board/freescale/p1_p2_rdb_pc/spl_minimal.c b/board/freescale/p1_p2_rdb_pc/spl_minimal.c index ac07572c89f..adfa7b1e0f4 100644 --- a/board/freescale/p1_p2_rdb_pc/spl_minimal.c +++ b/board/freescale/p1_p2_rdb_pc/spl_minimal.c @@ -15,59 +15,14 @@ DECLARE_GLOBAL_DATA_PTR; -#ifndef CONFIG_SYS_INIT_L2_ADDR -/* - * Fixed sdram init -- doesn't use serial presence detect. - */ -static void sdram_init(void) -{ - ccsr_ddr_t *ddr = (ccsr_ddr_t *)CONFIG_SYS_MPC8xxx_DDR_ADDR; - - __raw_writel(CONFIG_SYS_DDR_CS0_BNDS, &ddr->cs0_bnds); - __raw_writel(CONFIG_SYS_DDR_CS0_CONFIG, &ddr->cs0_config); -#if CONFIG_CHIP_SELECTS_PER_CTRL > 1 - __raw_writel(CONFIG_SYS_DDR_CS1_BNDS, &ddr->cs1_bnds); - __raw_writel(CONFIG_SYS_DDR_CS1_CONFIG, &ddr->cs1_config); -#endif - __raw_writel(CONFIG_SYS_DDR_TIMING_3, &ddr->timing_cfg_3); - __raw_writel(CONFIG_SYS_DDR_TIMING_0, &ddr->timing_cfg_0); - __raw_writel(CONFIG_SYS_DDR_TIMING_1, &ddr->timing_cfg_1); - __raw_writel(CONFIG_SYS_DDR_TIMING_2, &ddr->timing_cfg_2); - - __raw_writel(CONFIG_SYS_DDR_CONTROL_2, &ddr->sdram_cfg_2); - __raw_writel(CONFIG_SYS_DDR_MODE_1, &ddr->sdram_mode); - __raw_writel(CONFIG_SYS_DDR_MODE_2, &ddr->sdram_mode_2); - - __raw_writel(CONFIG_SYS_DDR_INTERVAL, &ddr->sdram_interval); - __raw_writel(CONFIG_SYS_DDR_DATA_INIT, &ddr->sdram_data_init); - __raw_writel(CONFIG_SYS_DDR_CLK_CTRL, &ddr->sdram_clk_cntl); - - __raw_writel(CONFIG_SYS_DDR_TIMING_4, &ddr->timing_cfg_4); - __raw_writel(CONFIG_SYS_DDR_TIMING_5, &ddr->timing_cfg_5); - __raw_writel(CONFIG_SYS_DDR_ZQ_CONTROL, &ddr->ddr_zq_cntl); - __raw_writel(CONFIG_SYS_DDR_WRLVL_CONTROL, &ddr->ddr_wrlvl_cntl); - - /* Set, but do not enable the memory */ - __raw_writel(CONFIG_SYS_DDR_CONTROL & ~SDRAM_CFG_MEM_EN, &ddr->sdram_cfg); - - asm volatile("sync;isync"); - udelay(500); - - /* Let the controller go */ - out_be32(&ddr->sdram_cfg, in_be32(&ddr->sdram_cfg) | SDRAM_CFG_MEM_EN); - - set_next_law(0, CONFIG_SYS_SDRAM_SIZE_LAW, LAW_TRGT_IF_DDR_1); -} -#endif - void board_init_f(ulong bootflag) { u32 plat_ratio; ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR; -#ifndef CONFIG_QE - ccsr_gpio_t *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO_ADDR); -#elif defined(CONFIG_P1021RDB) - par_io_t *par_io = (par_io_t *)&(gur->qe_par_io); + +#if defined(CONFIG_SYS_NAND_BR_PRELIM) && defined(CONFIG_SYS_NAND_OR_PRELIM) + set_lbc_br(0, CONFIG_SYS_NAND_BR_PRELIM); + set_lbc_or(0, CONFIG_SYS_NAND_OR_PRELIM); #endif /* initialize selected port with appropriate baud rate */ @@ -80,35 +35,6 @@ void board_init_f(ulong bootflag) puts("\nNAND boot... "); -#ifndef CONFIG_QE - /* init DDR3 reset signal */ - __raw_writel(0x02000000, &pgpio->gpdir); - __raw_writel(0x00200000, &pgpio->gpodr); - __raw_writel(0x00000000, &pgpio->gpdat); - udelay(1000); - __raw_writel(0x00200000, &pgpio->gpdat); - udelay(1000); - __raw_writel(0x00000000, &pgpio->gpdir); -#elif defined(CONFIG_P1021RDB) - /* init DDR3 reset signal CE_PB8 */ - out_be32(&par_io[1].cpdir1, 0x00004000); - out_be32(&par_io[1].cpodr, 0x00800000); - out_be32(&par_io[1].cppar1, 0x00000000); - /* reset DDR3 */ - out_be32(&par_io[1].cpdat, 0x00800000); - udelay(1000); - out_be32(&par_io[1].cpdat, 0x00000000); - udelay(1000); - out_be32(&par_io[1].cpdat, 0x00800000); - /* disable the CE_PB8 */ - out_be32(&par_io[1].cpdir1, 0x00000000); -#endif - -#ifndef CONFIG_SYS_INIT_L2_ADDR - /* Initialize the DDR3 */ - sdram_init(); -#endif - /* copy code to RAM and jump to it - this should not return */ /* NOTE - code has to be copied out of NAND buffer before * other blocks can be read. @@ -118,6 +44,7 @@ void board_init_f(ulong bootflag) void board_init_r(gd_t *gd, ulong dest_addr) { + puts("\nSecond program loader running in sram..."); nand_boot(); } diff --git a/board/freescale/p1_p2_rdb_pc/tlb.c b/board/freescale/p1_p2_rdb_pc/tlb.c index d4561c7643d..1c0008b2e65 100644 --- a/board/freescale/p1_p2_rdb_pc/tlb.c +++ b/board/freescale/p1_p2_rdb_pc/tlb.c @@ -78,17 +78,8 @@ struct fsl_e_tlb_entry tlb_table[] = { 0, 7, BOOKE_PAGESZ_1M, 1), #endif -#if defined(CONFIG_SYS_RAMBOOT) || defined(CONFIG_SPL) -#ifdef CONFIG_SYS_INIT_L2_ADDR - /* L2SRAM */ - SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L2_ADDR, CONFIG_SYS_INIT_L2_ADDR_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 8, BOOKE_PAGESZ_256K, 1), - SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L2_ADDR + 0x40000, - CONFIG_SYS_INIT_L2_ADDR_PHYS + 0x40000, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 12, BOOKE_PAGESZ_256K, 1), -#else +#if defined(CONFIG_SYS_RAMBOOT) || \ + (defined(CONFIG_SPL) && !defined(CONFIG_SPL_COMMON_INIT_DDR)) /* *I*G - eSDHC/eSPI/NAND boot */ SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE, MAS3_SX|MAS3_SW|MAS3_SR, 0, @@ -101,8 +92,20 @@ struct fsl_e_tlb_entry tlb_table[] = { MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 9, BOOKE_PAGESZ_1G, 1), #endif /* P1020MBG */ -#endif /* not L2 SRAM */ #endif /* RAMBOOT/SPL */ + +#ifdef CONFIG_SYS_INIT_L2_ADDR + /* *I*G - L2SRAM */ + SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L2_ADDR, CONFIG_SYS_INIT_L2_ADDR_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_G, + 0, 11, BOOKE_PAGESZ_256K, 1), +#if CONFIG_SYS_L2_SIZE >= (256 << 10) + SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L2_ADDR + 0x40000, + CONFIG_SYS_INIT_L2_ADDR_PHYS + 0x40000, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 12, BOOKE_PAGESZ_256K, 1) +#endif +#endif }; int num_tlb_entries = ARRAY_SIZE(tlb_table); diff --git a/board/freescale/p2020ds/ddr.c b/board/freescale/p2020ds/ddr.c index 59034f9f89f..b12141f2963 100644 --- a/board/freescale/p2020ds/ddr.c +++ b/board/freescale/p2020ds/ddr.c @@ -17,7 +17,7 @@ struct board_specific_parameters { u32 clk_adjust; u32 cpo; u32 write_data_delay; - u32 force_2T; + u32 force_2t; }; @@ -90,7 +90,7 @@ void fsl_ddr_board_options(memctl_options_t *popts, popts->cpo_override = pbsp->cpo; popts->write_data_delay = pbsp->write_data_delay; - popts->twoT_en = pbsp->force_2T; + popts->twot_en = pbsp->force_2t; goto found; } pbsp_highest = pbsp; @@ -106,7 +106,7 @@ void fsl_ddr_board_options(memctl_options_t *popts, popts->clk_adjust = pbsp_highest->clk_adjust; popts->cpo_override = pbsp_highest->cpo; popts->write_data_delay = pbsp_highest->write_data_delay; - popts->twoT_en = pbsp_highest->force_2T; + popts->twot_en = pbsp_highest->force_2t; } else { panic("DIMM is not supported by this board"); } diff --git a/board/freescale/p2041rdb/ddr.c b/board/freescale/p2041rdb/ddr.c index 6d9a5de1c51..cc1bfae394e 100644 --- a/board/freescale/p2041rdb/ddr.c +++ b/board/freescale/p2041rdb/ddr.c @@ -21,7 +21,7 @@ struct board_specific_parameters { u32 wrlvl_start; u32 cpo; u32 write_data_delay; - u32 force_2T; + u32 force_2t; }; /* @@ -76,7 +76,7 @@ void fsl_ddr_board_options(memctl_options_t *popts, pbsp->write_data_delay; popts->clk_adjust = pbsp->clk_adjust; popts->wrlvl_start = pbsp->wrlvl_start; - popts->twoT_en = pbsp->force_2T; + popts->twot_en = pbsp->force_2t; goto found; } pbsp_highest = pbsp; @@ -93,7 +93,7 @@ void fsl_ddr_board_options(memctl_options_t *popts, popts->write_data_delay = pbsp_highest->write_data_delay; popts->clk_adjust = pbsp_highest->clk_adjust; popts->wrlvl_start = pbsp_highest->wrlvl_start; - popts->twoT_en = pbsp_highest->force_2T; + popts->twot_en = pbsp_highest->force_2t; } else { panic("DIMM is not supported by this board"); } diff --git a/board/freescale/t1040qds/Makefile b/board/freescale/t1040qds/Makefile new file mode 100644 index 00000000000..8f0057b1a64 --- /dev/null +++ b/board/freescale/t1040qds/Makefile @@ -0,0 +1,37 @@ +# +# Copyright 2013 Freescale Semiconductor, Inc. +# +# SPDX-License-Identifier: GPL-2.0+ +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).o + +COBJS-y += $(BOARD).o +COBJS-y += ddr.o +COBJS-$(CONFIG_PCI) += pci.o +COBJS-y += law.o +COBJS-y += tlb.o + +SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS-y)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(call cmd_link_o_target, $(OBJS)) + +clean: + rm -f $(OBJS) $(SOBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/freescale/t1040qds/README b/board/freescale/t1040qds/README new file mode 100644 index 00000000000..f8b53b4212c --- /dev/null +++ b/board/freescale/t1040qds/README @@ -0,0 +1,169 @@ +Overview +-------- +The T1040QDS is a Freescale reference board that hosts the T1040 SoC +(and variants). + +T1040 SoC Overview +------------------ +The QorIQ T1040/T1042 processor support four integrated 64-bit e5500 PA +processor cores with high-performance data path acceleration architecture +and network peripheral interfaces required for networking & telecommunications. + +The T1040/T1042 SoC includes the following function and features: + + - Four e5500 cores, each with a private 256 KB L2 cache + - 256 KB shared L3 CoreNet platform cache (CPC) + - Interconnect CoreNet platform + - 32-/64-bit DDR3L/DDR4 SDRAM memory controller with ECC and interleaving + support + - Data Path Acceleration Architecture (DPAA) incorporating acceleration + for the following functions: + - Packet parsing, classification, and distribution + - Queue management for scheduling, packet sequencing, and congestion + management + - Cryptography Acceleration (SEC 5.0) + - RegEx Pattern Matching Acceleration (PME 2.2) + - IEEE Std 1588 support + - Hardware buffer management for buffer allocation and deallocation + - Ethernet interfaces + - Integrated 8-port Gigabit Ethernet switch (T1040 only) + - Four 1 Gbps Ethernet controllers + - Two RGMII interfaces or one RGMII and one MII interfaces + - High speed peripheral interfaces + - Four PCI Express 2.0 controllers running at up to 5 GHz + - Two SATA controllers supporting 1.5 and 3.0 Gb/s operation + - Upto two QSGMII interface + - Upto six SGMII interface supporting 1000 Mbps + - One SGMII interface supporting upto 2500 Mbps + - Additional peripheral interfaces + - Two USB 2.0 controllers with integrated PHY + - SD/eSDHC/eMMC + - eSPI controller + - Four I2C controllers + - Four UARTs + - Four GPIO controllers + - Integrated flash controller (IFC) + - LCD and HDMI interface (DIU) with 12 bit dual data rate + - TDM interface + - Multicore programmable interrupt controller (PIC) + - Two 8-channel DMA engines + - Single source clocking implementation + - Deep Sleep power implementaion (wakeup from GPIO/Timer/Ethernet/USB) + + T1040QDS board Overview + ----------------------- + - SERDES Connections, 8 lanes supporting: + — PCI Express: supporting Gen 1 and Gen 2; + — SGMII + — QSGMII + — SATA 2.0 + — Aurora debug with dedicated connectors (T1040 only) + - DDR Controller + - Supports rates of up to 1600 MHz data-rate + - Supports one DDR3LP UDIMM/RDIMMs, of single-, dual- or quad-rank types. + -IFC/Local Bus + - NAND flash: 8-bit, async, up to 2GB. + - NOR: 8-bit or 16-bit, non-multiplexed, up to 512MB + - GASIC: Simple (minimal) target within Qixis FPGA + - PromJET rapid memory download support + - Ethernet + - Two on-board RGMII 10/100/1G ethernet ports. + - PHY #0 remains powered up during deep-sleep (T1040 only) + - QIXIS System Logic FPGA + - Clocks + - System and DDR clock (SYSCLK, “DDRCLK”) + - SERDES clocks + - Power Supplies + - Video + - DIU supports video at up to 1280x1024x32bpp + - USB + - Supports two USB 2.0 ports with integrated PHYs + — Two type A ports with 5V@1.5A per port. + — Second port can be converted to OTG mini-AB + - SDHC + - SDHC port connects directly to an adapter card slot, featuring: + - Supporting SD slots for: SD, SDHC (1x, 4x, 8x) and/or MMC + — Supporting eMMC memory devices + - SPI + - On-board support of 3 different devices and sizes + - Other IO + - Two Serial ports + - ProfiBus port + - Four I2C ports + +Memory map on T1040QDS +---------------------- +The addresses in brackets are physical addresses. + +Start Address End Address Description Size +0xF_FFDF_0000 0xF_FFDF_0FFF IFC - FPGA 4KB +0xF_FF80_0000 0xF_FF80_FFFF IFC - NAND Flash 64KB +0xF_FE00_0000 0xF_FEFF_FFFF CCSRBAR 16MB +0xF_F803_0000 0xF_F803_FFFF PCI Express 4 I/O Space 64KB +0xF_F802_0000 0xF_F802_FFFF PCI Express 3 I/O Space 64KB +0xF_F801_0000 0xF_F801_FFFF PCI Express 2 I/O Space 64KB +0xF_F800_0000 0xF_F800_FFFF PCI Express 1 I/O Space 64KB +0xF_F600_0000 0xF_F7FF_FFFF Queue manager software portal 32MB +0xF_F400_0000 0xF_F5FF_FFFF Buffer manager software portal 32MB +0xF_E800_0000 0xF_EFFF_FFFF IFC - NOR Flash 128MB +0xF_E000_0000 0xF_E7FF_FFFF Promjet 128MB +0xF_0000_0000 0xF_003F_FFFF DCSR 4MB +0xC_3000_0000 0xC_3FFF_FFFF PCI Express 4 Mem Space 256MB +0xC_2000_0000 0xC_2FFF_FFFF PCI Express 3 Mem Space 256MB +0xC_1000_0000 0xC_1FFF_FFFF PCI Express 2 Mem Space 256MB +0xC_0000_0000 0xC_0FFF_FFFF PCI Express 1 Mem Space 256MB +0x0_0000_0000 0x0_ffff_ffff DDR 2GB + + +NOR Flash memory Map on T1040QDS +-------------------------------- + Start End Definition Size +0xEFF80000 0xEFFFFFFF u-boot (current bank) 512KB +0xEFF60000 0xEFF7FFFF u-boot env (current bank) 128KB +0xEFF40000 0xEFF5FFFF FMAN Ucode (current bank) 128KB +0xED300000 0xEFF3FFFF rootfs (alt bank) 44MB + 256KB +0xEC800000 0xEC8FFFF Hardware device tree (alt bank) 1MB +0xEC020000 0xEC7FFFFF Linux.uImage (alt bank) 7MB + 875KB +0xEC000000 0xEC01FFFF RCW (alt bank) 128KB +0xEBF80000 0xEBFFFFFF u-boot (alt bank) 512KB +0xEBF60000 0xEBF7FFFF u-boot env (alt bank) 128KB +0xEBF40000 0xEBF5FFFF FMAN ucode (alt bank) 128KB +0xE9300000 0xEBF3FFFF rootfs (current bank) 44MB + 256KB +0xE8800000 0xE88FFFFF Hardware device tree (cur bank) 11MB + 512KB +0xE8020000 0xE86FFFFF Linux.uImage (current bank) 7MB + 875KB +0xE8000000 0xE801FFFF RCW (current bank) 128KB + + +Various Software configurations/environment variables/commands +-------------------------------------------------------------- +The below commands apply to T1040QDS + +1. U-boot environment variable hwconfig + The default hwconfig is: + hwconfig=fsl_ddr:ctlr_intlv=null,bank_intlv=cs0_cs1;usb1: + dr_mode=host,phy_type=utmi + Note: For USB gadget set "dr_mode=peripheral" + +2. FMAN Ucode versions + fsl_fman_ucode_t1040.bin + +3. Switching to alternate bank + Commands for switching to alternate bank. + + 1. To change from vbank0 to vbank4 + => qixis_reset altbank (it will boot using vbank4) + + 2.To change from vbank4 to vbank0 + => qixis reset (it will boot using vbank0) + +T1040 Personality +-------------------- + +T1022 Personality +-------------------- +T1022 is a reduced personality of T1040 with less core/clusters. + +T1042 Personality +-------------------- +T1042 is a reduced personality of T1040 without Integrated 8-port Gigabit +Ethernet switch. Rest of the blocks are same as T1040 diff --git a/board/freescale/t1040qds/ddr.c b/board/freescale/t1040qds/ddr.c new file mode 100644 index 00000000000..4fd17da160a --- /dev/null +++ b/board/freescale/t1040qds/ddr.c @@ -0,0 +1,117 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <i2c.h> +#include <hwconfig.h> +#include <asm/mmu.h> +#include <asm/fsl_ddr_sdram.h> +#include <asm/fsl_ddr_dimm_params.h> +#include <asm/fsl_law.h> +#include "ddr.h" + +DECLARE_GLOBAL_DATA_PTR; + +void fsl_ddr_board_options(memctl_options_t *popts, + dimm_params_t *pdimm, + unsigned int ctrl_num) +{ + const struct board_specific_parameters *pbsp, *pbsp_highest = NULL; + ulong ddr_freq; + + if (ctrl_num > 2) { + printf("Not supported controller number %d\n", ctrl_num); + return; + } + if (!pdimm->n_ranks) + return; + + pbsp = udimms[0]; + + /* Get clk_adjust, cpo, write_data_delay,2t, according to the board ddr + * freqency and n_banks specified in board_specific_parameters table. + */ + ddr_freq = get_ddr_freq(0) / 1000000; + while (pbsp->datarate_mhz_high) { + if (pbsp->n_ranks == pdimm->n_ranks && + (pdimm->rank_density >> 30) >= pbsp->rank_gb) { + if (ddr_freq <= pbsp->datarate_mhz_high) { + popts->cpo_override = pbsp->cpo; + popts->write_data_delay = + pbsp->write_data_delay; + popts->clk_adjust = pbsp->clk_adjust; + popts->wrlvl_start = pbsp->wrlvl_start; + popts->wrlvl_ctl_2 = pbsp->wrlvl_ctl_2; + popts->wrlvl_ctl_3 = pbsp->wrlvl_ctl_3; + popts->twot_en = pbsp->force_2t; + goto found; + } + pbsp_highest = pbsp; + } + pbsp++; + } + + if (pbsp_highest) { + printf("Error: board specific timing not found\n"); + printf("for data rate %lu MT/s\n", ddr_freq); + printf("Trying to use the highest speed (%u) parameters\n", + pbsp_highest->datarate_mhz_high); + popts->cpo_override = pbsp_highest->cpo; + popts->write_data_delay = pbsp_highest->write_data_delay; + popts->clk_adjust = pbsp_highest->clk_adjust; + popts->wrlvl_start = pbsp_highest->wrlvl_start; + popts->wrlvl_ctl_2 = pbsp->wrlvl_ctl_2; + popts->wrlvl_ctl_3 = pbsp->wrlvl_ctl_3; + popts->twot_en = pbsp_highest->force_2t; + } else { + panic("DIMM is not supported by this board"); + } +found: + debug("Found timing match: n_ranks %d, data rate %d, rank_gb %d\n" + "\tclk_adjust %d, wrlvl_start %d, wrlvl_ctrl_2 0x%x, " + "wrlvl_ctrl_3 0x%x\n", + pbsp->n_ranks, pbsp->datarate_mhz_high, pbsp->rank_gb, + pbsp->clk_adjust, pbsp->wrlvl_start, pbsp->wrlvl_ctl_2, + pbsp->wrlvl_ctl_3); + + /* + * Factors to consider for half-strength driver enable: + * - number of DIMMs installed + */ + popts->half_strength_driver_enable = 0; + /* + * Write leveling override + */ + popts->wrlvl_override = 1; + popts->wrlvl_sample = 0xf; + + /* + * rtt and rtt_wr override + */ + popts->rtt_override = 0; + + /* Enable ZQ calibration */ + popts->zq_en = 1; + + /* DHC_EN =1, ODT = 75 Ohm */ + popts->ddr_cdr1 = DDR_CDR1_DHC_EN | DDR_CDR1_ODT(DDR_CDR_ODT_75ohm); + popts->ddr_cdr2 = DDR_CDR2_ODT(DDR_CDR_ODT_75ohm); +} + +phys_size_t initdram(int board_type) +{ + phys_size_t dram_size; + + puts("Initializing....using SPD\n"); + + dram_size = fsl_ddr_sdram(); + + dram_size = setup_ddr_tlbs(dram_size / 0x100000); + dram_size *= 0x100000; + + puts(" DDR: "); + return dram_size; +} diff --git a/board/freescale/t1040qds/ddr.h b/board/freescale/t1040qds/ddr.h new file mode 100644 index 00000000000..8ee206e79da --- /dev/null +++ b/board/freescale/t1040qds/ddr.h @@ -0,0 +1,50 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __DDR_H__ +#define __DDR_H__ +struct board_specific_parameters { + u32 n_ranks; + u32 datarate_mhz_high; + u32 rank_gb; + u32 clk_adjust; + u32 wrlvl_start; + u32 wrlvl_ctl_2; + u32 wrlvl_ctl_3; + u32 cpo; + u32 write_data_delay; + u32 force_2t; +}; + +/* + * These tables contain all valid speeds we want to override with board + * specific parameters. datarate_mhz_high values need to be in ascending order + * for each n_ranks group. + */ + +static const struct board_specific_parameters udimm0[] = { + /* + * memory controller 0 + * num| hi| rank| clk| wrlvl | wrlvl | wrlvl | cpo |wrdata|2T + * ranks| mhz| GB |adjst| start | ctl2 | ctl3 | |delay | + */ + {2, 1350, 4, 4, 8, 0x0809090b, 0x0c0c0d0a, 0xff, 2, 0}, + {2, 1350, 0, 5, 7, 0x0709090b, 0x0c0c0d09, 0xff, 2, 0}, + {2, 1666, 4, 4, 8, 0x080a0a0d, 0x0d10100b, 0xff, 2, 0}, + {2, 1666, 0, 5, 7, 0x080a0a0c, 0x0d0d0e0a, 0xff, 2, 0}, + {2, 1900, 0, 4, 8, 0x090a0b0e, 0x0f11120c, 0xff, 2, 0}, + {2, 2140, 0, 4, 8, 0x090a0b0e, 0x0f11120c, 0xff, 2, 0}, + {1, 1350, 0, 5, 8, 0x0809090b, 0x0c0c0d0a, 0xff, 2, 0}, + {1, 1700, 0, 5, 8, 0x080a0a0c, 0x0c0d0e0a, 0xff, 2, 0}, + {1, 1900, 0, 4, 8, 0x080a0a0c, 0x0e0e0f0a, 0xff, 2, 0}, + {1, 2140, 0, 4, 8, 0x090a0b0c, 0x0e0f100b, 0xff, 2, 0}, + {} +}; + +static const struct board_specific_parameters *udimms[] = { + udimm0, +}; +#endif diff --git a/board/freescale/t1040qds/law.c b/board/freescale/t1040qds/law.c new file mode 100644 index 00000000000..a2dc027e4b5 --- /dev/null +++ b/board/freescale/t1040qds/law.c @@ -0,0 +1,32 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/fsl_law.h> +#include <asm/mmu.h> + +struct law_entry law_table[] = { +#ifndef CONFIG_SYS_NO_FLASH + SET_LAW(CONFIG_SYS_FLASH_BASE_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_IFC), +#endif +#ifdef CONFIG_SYS_BMAN_MEM_PHYS + SET_LAW(CONFIG_SYS_BMAN_MEM_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_BMAN), +#endif +#ifdef CONFIG_SYS_QMAN_MEM_PHYS + SET_LAW(CONFIG_SYS_QMAN_MEM_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_QMAN), +#endif +#ifdef QIXIS_BASE_PHYS + SET_LAW(QIXIS_BASE_PHYS, LAW_SIZE_4K, LAW_TRGT_IF_IFC), +#endif +#ifdef CONFIG_SYS_DCSRBAR_PHYS + SET_LAW(CONFIG_SYS_DCSRBAR_PHYS, LAW_SIZE_4M, LAW_TRGT_IF_DCSR), +#endif +#ifdef CONFIG_SYS_NAND_BASE_PHYS + SET_LAW(CONFIG_SYS_NAND_BASE_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_IFC), +#endif +}; + +int num_law_entries = ARRAY_SIZE(law_table); diff --git a/board/freescale/t1040qds/pci.c b/board/freescale/t1040qds/pci.c new file mode 100644 index 00000000000..c53e3b76a45 --- /dev/null +++ b/board/freescale/t1040qds/pci.c @@ -0,0 +1,23 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <command.h> +#include <pci.h> +#include <asm/fsl_pci.h> +#include <libfdt.h> +#include <fdt_support.h> +#include <asm/fsl_serdes.h> + +void pci_init_board(void) +{ + fsl_pcie_init_board(0); +} + +void pci_of_setup(void *blob, bd_t *bd) +{ + FT_FSL_PCI_SETUP; +} diff --git a/board/freescale/t1040qds/t1040qds.c b/board/freescale/t1040qds/t1040qds.c new file mode 100644 index 00000000000..5abb18a2603 --- /dev/null +++ b/board/freescale/t1040qds/t1040qds.c @@ -0,0 +1,255 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <command.h> +#include <i2c.h> +#include <netdev.h> +#include <linux/compiler.h> +#include <asm/mmu.h> +#include <asm/processor.h> +#include <asm/cache.h> +#include <asm/immap_85xx.h> +#include <asm/fsl_law.h> +#include <asm/fsl_serdes.h> +#include <asm/fsl_portals.h> +#include <asm/fsl_liodn.h> +#include <fm_eth.h> + +#include "../common/qixis.h" +#include "t1040qds.h" +#include "t1040qds_qixis.h" + +DECLARE_GLOBAL_DATA_PTR; + +int checkboard(void) +{ + char buf[64]; + u8 sw; + struct cpu_type *cpu = gd->arch.cpu; + static const char *const freq[] = {"100", "125", "156.25", "161.13", + "122.88", "122.88", "122.88"}; + int clock; + + printf("Board: %sQDS, ", cpu->name); + printf("Sys ID: 0x%02x, Sys Ver: 0x%02x, ", + QIXIS_READ(id), QIXIS_READ(arch)); + + sw = QIXIS_READ(brdcfg[0]); + sw = (sw & QIXIS_LBMAP_MASK) >> QIXIS_LBMAP_SHIFT; + + if (sw < 0x8) + printf("vBank: %d\n", sw); + else if (sw == 0x8) + puts("PromJet\n"); + else if (sw == 0x9) + puts("NAND\n"); + else if (sw == 0x15) + printf("IFCCard\n"); + else + printf("invalid setting of SW%u\n", QIXIS_LBMAP_SWITCH); + + printf("FPGA: v%d (%s), build %d", + (int)QIXIS_READ(scver), qixis_read_tag(buf), + (int)qixis_read_minor()); + /* the timestamp string contains "\n" at the end */ + printf(" on %s", qixis_read_time(buf)); + + /* + * Display the actual SERDES reference clocks as configured by the + * dip switches on the board. Note that the SWx registers could + * technically be set to force the reference clocks to match the + * values that the SERDES expects (or vice versa). For now, however, + * we just display both values and hope the user notices when they + * don't match. + */ + puts("SERDES Reference: "); + sw = QIXIS_READ(brdcfg[2]); + clock = (sw >> 6) & 3; + printf("Clock1=%sMHz ", freq[clock]); + clock = (sw >> 4) & 3; + printf("Clock2=%sMHz\n", freq[clock]); + + return 0; +} + +int select_i2c_ch_pca9547(u8 ch) +{ + int ret; + + ret = i2c_write(I2C_MUX_PCA_ADDR_PRI, 0, 1, &ch, 1); + if (ret) { + puts("PCA: failed to select proper channel\n"); + return ret; + } + + return 0; +} + +int board_early_init_r(void) +{ +#ifdef CONFIG_SYS_FLASH_BASE + const unsigned int flashbase = CONFIG_SYS_FLASH_BASE; + const u8 flash_esel = find_tlb_idx((void *)flashbase, 1); + + /* + * Remap Boot flash + PROMJET region to caching-inhibited + * so that flash can be erased properly. + */ + + /* Flush d-cache and invalidate i-cache of any FLASH data */ + flush_dcache(); + invalidate_icache(); + + /* invalidate existing TLB entry for flash + promjet */ + disable_tlb(flash_esel); + + set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, flash_esel, BOOKE_PAGESZ_256M, 1); +#endif + set_liodns(); +#ifdef CONFIG_SYS_DPAA_QBMAN + setup_portals(); +#endif + select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT); + + return 0; +} + +unsigned long get_board_sys_clk(void) +{ + u8 sysclk_conf = QIXIS_READ(brdcfg[1]); + + switch (sysclk_conf & 0x0F) { + case QIXIS_SYSCLK_64: + return 64000000; + case QIXIS_SYSCLK_83: + return 83333333; + case QIXIS_SYSCLK_100: + return 100000000; + case QIXIS_SYSCLK_125: + return 125000000; + case QIXIS_SYSCLK_133: + return 133333333; + case QIXIS_SYSCLK_150: + return 150000000; + case QIXIS_SYSCLK_160: + return 160000000; + case QIXIS_SYSCLK_166: + return 166666666; + } + return 66666666; +} + +unsigned long get_board_ddr_clk(void) +{ + u8 ddrclk_conf = QIXIS_READ(brdcfg[1]); + + switch ((ddrclk_conf & 0x30) >> 4) { + case QIXIS_DDRCLK_100: + return 100000000; + case QIXIS_DDRCLK_125: + return 125000000; + case QIXIS_DDRCLK_133: + return 133333333; + } + return 66666666; +} + +static const char *serdes_clock_to_string(u32 clock) +{ + switch (clock) { + case SRDS_PLLCR0_RFCK_SEL_100: + return "100"; + case SRDS_PLLCR0_RFCK_SEL_125: + return "125"; + case SRDS_PLLCR0_RFCK_SEL_156_25: + return "156.25"; + default: + return "Unknown frequency"; + } +} + +#define NUM_SRDS_BANKS 2 +int misc_init_r(void) +{ + u8 sw; + serdes_corenet_t *srds_regs = + (void *)CONFIG_SYS_FSL_CORENET_SERDES_ADDR; + u32 actual[NUM_SRDS_BANKS] = { 0 }; + int i; + + sw = QIXIS_READ(brdcfg[2]); + for (i = 0; i < NUM_SRDS_BANKS; i++) { + unsigned int clock = (sw >> (6 - 2 * i)) & 3; + switch (clock) { + case 0: + actual[i] = SRDS_PLLCR0_RFCK_SEL_100; + break; + case 1: + actual[i] = SRDS_PLLCR0_RFCK_SEL_125; + break; + case 2: + actual[i] = SRDS_PLLCR0_RFCK_SEL_156_25; + break; + } + } + + puts("SerDes1"); + for (i = 0; i < NUM_SRDS_BANKS; i++) { + u32 pllcr0 = srds_regs->bank[i].pllcr0; + u32 expected = pllcr0 & SRDS_PLLCR0_RFCK_SEL_MASK; + if (expected != actual[i]) { + printf("expects ref clk%d %sMHz, but actual is %sMHz\n", + i + 1, serdes_clock_to_string(expected), + serdes_clock_to_string(actual[i])); + } + } + + return 0; +} + +void ft_board_setup(void *blob, bd_t *bd) +{ + phys_addr_t base; + phys_size_t size; + + ft_cpu_setup(blob, bd); + + base = getenv_bootm_low(); + size = getenv_bootm_size(); + + fdt_fixup_memory(blob, (u64)base, (u64)size); + +#ifdef CONFIG_PCI + pci_of_setup(blob, bd); +#endif + + fdt_fixup_liodn(blob); + +#ifdef CONFIG_HAS_FSL_DR_USB + fdt_fixup_dr_usb(blob, bd); +#endif + +#ifdef CONFIG_SYS_DPAA_FMAN + fdt_fixup_fman_ethernet(blob); +#endif +} + +void qixis_dump_switch(void) +{ + int i, nr_of_cfgsw; + + QIXIS_WRITE(cms[0], 0x00); + nr_of_cfgsw = QIXIS_READ(cms[1]); + + puts("DIP switch settings dump:\n"); + for (i = 1; i <= nr_of_cfgsw; i++) { + QIXIS_WRITE(cms[0], i); + printf("SW%d = (0x%02x)\n", i, QIXIS_READ(cms[1])); + } +} diff --git a/board/freescale/t1040qds/t1040qds.h b/board/freescale/t1040qds/t1040qds.h new file mode 100644 index 00000000000..79bdedaff32 --- /dev/null +++ b/board/freescale/t1040qds/t1040qds.h @@ -0,0 +1,13 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __T1040_QDS_H__ +#define __T1040_QDS_H__ + +void fdt_fixup_board_enet(void *blob); +void pci_of_setup(void *blob, bd_t *bd); + +#endif diff --git a/board/freescale/t1040qds/t1040qds_qixis.h b/board/freescale/t1040qds/t1040qds_qixis.h new file mode 100644 index 00000000000..2ce87959b58 --- /dev/null +++ b/board/freescale/t1040qds/t1040qds_qixis.h @@ -0,0 +1,36 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __T1040QDS_QIXIS_H__ +#define __T1040QDS_QIXIS_H__ + +/* Definitions of QIXIS Registers for T1040QDS */ + +/* BRDCFG4[4:7]] select EC1 and EC2 as a pair */ +#define BRDCFG4_EMISEL_MASK 0xE0 +#define BRDCFG4_EMISEL_SHIFT 5 + +/* SYSCLK */ +#define QIXIS_SYSCLK_66 0x0 +#define QIXIS_SYSCLK_83 0x1 +#define QIXIS_SYSCLK_100 0x2 +#define QIXIS_SYSCLK_125 0x3 +#define QIXIS_SYSCLK_133 0x4 +#define QIXIS_SYSCLK_150 0x5 +#define QIXIS_SYSCLK_160 0x6 +#define QIXIS_SYSCLK_166 0x7 +#define QIXIS_SYSCLK_64 0x8 + +/* DDRCLK */ +#define QIXIS_DDRCLK_66 0x0 +#define QIXIS_DDRCLK_100 0x1 +#define QIXIS_DDRCLK_125 0x2 +#define QIXIS_DDRCLK_133 0x3 + + +#define QIXIS_SRDS1CLK_122 0x5a +#define QIXIS_SRDS1CLK_125 0x5e +#endif diff --git a/board/freescale/t1040qds/tlb.c b/board/freescale/t1040qds/tlb.c new file mode 100644 index 00000000000..412c591f1ca --- /dev/null +++ b/board/freescale/t1040qds/tlb.c @@ -0,0 +1,108 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/mmu.h> + +struct fsl_e_tlb_entry tlb_table[] = { + /* TLB 0 - for temp stack in cache */ + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, + CONFIG_SYS_INIT_RAM_ADDR_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024, + CONFIG_SYS_INIT_RAM_ADDR_PHYS + 4 * 1024, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024, + CONFIG_SYS_INIT_RAM_ADDR_PHYS + 8 * 1024, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024, + CONFIG_SYS_INIT_RAM_ADDR_PHYS + 12 * 1024, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + + /* TLB 1 */ + /* *I*** - Covers boot page */ +#if defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SYS_INIT_L3_ADDR) + /* + * *I*G - L3SRAM. When L3 is used as 256K SRAM, the address of the + * SRAM is at 0xfffc0000, it covered the 0xfffff000. + */ + SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L3_ADDR, CONFIG_SYS_INIT_L3_ADDR, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 0, BOOKE_PAGESZ_256K, 1), +#else + SET_TLB_ENTRY(1, 0xfffff000, 0xfffff000, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 0, BOOKE_PAGESZ_4K, 1), +#endif + + /* *I*G* - CCSRBAR */ + SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 1, BOOKE_PAGESZ_16M, 1), + + /* *I*G* - Flash, localbus */ + /* This will be changed to *I*G* after relocation to RAM. */ + SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE_PHYS, + MAS3_SX|MAS3_SR, MAS2_W|MAS2_G, + 0, 2, BOOKE_PAGESZ_256M, 1), + + /* *I*G* - PCI */ + SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT, CONFIG_SYS_PCIE1_MEM_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 3, BOOKE_PAGESZ_1G, 1), + + /* *I*G* - PCI I/O */ + SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_IO_VIRT, CONFIG_SYS_PCIE1_IO_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 4, BOOKE_PAGESZ_256K, 1), + + /* Bman/Qman */ +#ifdef CONFIG_SYS_BMAN_MEM_PHYS + SET_TLB_ENTRY(1, CONFIG_SYS_BMAN_MEM_BASE, CONFIG_SYS_BMAN_MEM_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 5, BOOKE_PAGESZ_16M, 1), + SET_TLB_ENTRY(1, CONFIG_SYS_BMAN_MEM_BASE + 0x01000000, + CONFIG_SYS_BMAN_MEM_PHYS + 0x01000000, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 6, BOOKE_PAGESZ_16M, 1), +#endif +#ifdef CONFIG_SYS_QMAN_MEM_PHYS + SET_TLB_ENTRY(1, CONFIG_SYS_QMAN_MEM_BASE, CONFIG_SYS_QMAN_MEM_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 7, BOOKE_PAGESZ_16M, 1), + SET_TLB_ENTRY(1, CONFIG_SYS_QMAN_MEM_BASE + 0x01000000, + CONFIG_SYS_QMAN_MEM_PHYS + 0x01000000, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 8, BOOKE_PAGESZ_16M, 1), +#endif +#ifdef CONFIG_SYS_DCSRBAR_PHYS + SET_TLB_ENTRY(1, CONFIG_SYS_DCSRBAR, CONFIG_SYS_DCSRBAR_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 9, BOOKE_PAGESZ_4M, 1), +#endif +#ifdef CONFIG_SYS_NAND_BASE + /* + * *I*G - NAND + * entry 14 and 15 has been used hard coded, they will be disabled + * in cpu_init_f, so we use entry 16 for nand. + */ + SET_TLB_ENTRY(1, CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_BASE_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 10, BOOKE_PAGESZ_64K, 1), +#endif +#ifdef QIXIS_BASE + SET_TLB_ENTRY(1, QIXIS_BASE, QIXIS_BASE_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 11, BOOKE_PAGESZ_4K, 1), +#endif + +}; + +int num_tlb_entries = ARRAY_SIZE(tlb_table); diff --git a/board/freescale/t4qds/ddr.c b/board/freescale/t4qds/ddr.c index 26ac2a54d25..d70c31051df 100644 --- a/board/freescale/t4qds/ddr.c +++ b/board/freescale/t4qds/ddr.c @@ -56,7 +56,7 @@ void fsl_ddr_board_options(memctl_options_t *popts, popts->wrlvl_start = pbsp->wrlvl_start; popts->wrlvl_ctl_2 = pbsp->wrlvl_ctl_2; popts->wrlvl_ctl_3 = pbsp->wrlvl_ctl_3; - popts->twoT_en = pbsp->force_2T; + popts->twot_en = pbsp->force_2t; goto found; } pbsp_highest = pbsp; @@ -75,7 +75,7 @@ void fsl_ddr_board_options(memctl_options_t *popts, popts->wrlvl_start = pbsp_highest->wrlvl_start; popts->wrlvl_ctl_2 = pbsp->wrlvl_ctl_2; popts->wrlvl_ctl_3 = pbsp->wrlvl_ctl_3; - popts->twoT_en = pbsp_highest->force_2T; + popts->twot_en = pbsp_highest->force_2t; } else { panic("DIMM is not supported by this board"); } diff --git a/board/freescale/t4qds/ddr.h b/board/freescale/t4qds/ddr.h index d0a0951af9e..8183af78feb 100644 --- a/board/freescale/t4qds/ddr.h +++ b/board/freescale/t4qds/ddr.h @@ -16,7 +16,7 @@ struct board_specific_parameters { u32 wrlvl_ctl_3; u32 cpo; u32 write_data_delay; - u32 force_2T; + u32 force_2t; }; /* diff --git a/board/freescale/t4qds/t4_rcw.cfg b/board/freescale/t4qds/t4_rcw.cfg index 6ac95ffd522..74df01a70c2 100644 --- a/board/freescale/t4qds/t4_rcw.cfg +++ b/board/freescale/t4qds/t4_rcw.cfg @@ -1,7 +1,7 @@ #PBL preamble and RCW header aa55aa55 010e0100 #serdes protocol 1_28_6_12 -14180019 0c101916 00000000 00000000 -04383060 30548c00 6c020000 19000000 -00000000 ee0000ee 00000000 000187fc -00000000 00000000 00000000 00000018 +120c0019 0c101915 00000000 00000000 +04383063 30548c00 6c020000 1d000000 +00000000 ee0000ee 00000000 000307fc +00000000 00000000 00000000 00000020 diff --git a/board/stx/stxgp3/ddr.c b/board/stx/stxgp3/ddr.c index 571137443eb..9e798152783 100644 --- a/board/stx/stxgp3/ddr.c +++ b/board/stx/stxgp3/ddr.c @@ -36,7 +36,7 @@ void fsl_ddr_board_options(memctl_options_t *popts, popts->write_data_delay = 3; /* 2T timing enable */ - popts->twoT_en = 1; + popts->twot_en = 1; /* * Factors to consider for half-strength driver enable: diff --git a/board/stx/stxssa/ddr.c b/board/stx/stxssa/ddr.c index 56c87b2fc6b..71be3bf636e 100644 --- a/board/stx/stxssa/ddr.c +++ b/board/stx/stxssa/ddr.c @@ -37,7 +37,7 @@ void fsl_ddr_board_options(memctl_options_t *popts, popts->write_data_delay = 3; /* 2T timing enable */ - popts->twoT_en = 1; + popts->twot_en = 1; /* * Factors to consider for half-strength driver enable: diff --git a/board/xes/xpedite550x/ddr.c b/board/xes/xpedite550x/ddr.c index a03a96b182b..9fc6f048c47 100644 --- a/board/xes/xpedite550x/ddr.c +++ b/board/xes/xpedite550x/ddr.c @@ -108,7 +108,7 @@ void fsl_ddr_board_options(memctl_options_t *popts, ddr_freq <= pbsp->datarate_mhz_high) { popts->clk_adjust = pbsp->clk_adjust; popts->cpo_override = pbsp->cpo; - popts->twoT_en = 0; + popts->twot_en = 0; break; } pbsp++; |