diff options
Diffstat (limited to 'board')
| -rw-r--r-- | board/AndesTech/adp-ag102/Makefile | 2 | ||||
| -rw-r--r-- | board/a3m071/README | 10 | ||||
| -rw-r--r-- | board/davinci/ea20/ea20.c | 28 | ||||
| -rw-r--r-- | board/xilinx/zynq/board.c | 4 |
4 files changed, 36 insertions, 8 deletions
diff --git a/board/AndesTech/adp-ag102/Makefile b/board/AndesTech/adp-ag102/Makefile index ec67dd04b04..6c187190b23 100644 --- a/board/AndesTech/adp-ag102/Makefile +++ b/board/AndesTech/adp-ag102/Makefile @@ -9,7 +9,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).o -COBJS := adp-ag102.o +COBJS-y := adp-ag102.o SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c) OBJS := $(addprefix $(obj),$(COBJS-y) $(SOBJS-y)) diff --git a/board/a3m071/README b/board/a3m071/README index a0fe832fb24..112c47b60da 100644 --- a/board/a3m071/README +++ b/board/a3m071/README @@ -57,13 +57,13 @@ the following command: => fdt print 5. Save fdt to NOR flash: -=> erase fc060000 fc07ffff -=> cp.b 1800000 fc060000 10000 +=> erase fc180000 fc07ffff +=> cp.b 1800000 fc180000 10000 All this can be integrated into an environment command: -=> setenv upd_fdt 'tftp 1800000 a3m071/a3m071.dtb;run mtdargs addip2 addtty; \ - fdt addr 1800000;fdt boardsetup;fdt chosen;erase fc060000 fc07ffff; \ - cp.b 1800000 fc060000 10000' +=> setenv upd_fdt 'tftp 1800000 a3m071/a3m071.dtb;run mtdargs addip addtty; \ + fdt addr 1800000;fdt boardsetup;fdt chosen;erase fc180000 fc07ffff; \ + cp.b 1800000 fc180000 10000' => saveenv After this, only "run upd_fdt" needs to get called to load, patch diff --git a/board/davinci/ea20/ea20.c b/board/davinci/ea20/ea20.c index c7869977990..c4444c7c7f5 100644 --- a/board/davinci/ea20/ea20.c +++ b/board/davinci/ea20/ea20.c @@ -24,7 +24,7 @@ #include <asm/io.h> #include <asm/arch/davinci_misc.h> #include <asm/gpio.h> -#include <asm/arch/da8xx-fb.h> +#include "../../../drivers/video/da8xx-fb.h" DECLARE_GLOBAL_DATA_PTR; @@ -43,6 +43,30 @@ static const struct da8xx_panel lcd_panel = { .invert_pxl_clk = 0, }; +static const struct display_panel disp_panel = { + QVGA, + 16, + 16, + COLOR_ACTIVE, +}; + +static const struct lcd_ctrl_config lcd_cfg = { + &disp_panel, + .ac_bias = 255, + .ac_bias_intrpt = 0, + .dma_burst_sz = 16, + .bpp = 16, + .fdd = 255, + .tft_alt_mode = 0, + .stn_565_mode = 0, + .mono_8bit_mode = 0, + .invert_line_clock = 1, + .invert_frm_clock = 1, + .sync_edge = 0, + .sync_ctrl = 1, + .raster_order = 0, +}; + /* SPI0 pin muxer settings */ static const struct pinmux_config spi1_pins[] = { { pinmux(5), 1, 1 }, @@ -259,7 +283,7 @@ int board_init(void) /* address of boot parameters */ gd->bd->bi_boot_params = LINUX_BOOT_PARAM_ADDR; - da8xx_video_init(&lcd_panel, 16); + da8xx_video_init(&lcd_panel, &lcd_cfg, 16); return 0; } diff --git a/board/xilinx/zynq/board.c b/board/xilinx/zynq/board.c index 4bb140e29ec..c173f0cc51f 100644 --- a/board/xilinx/zynq/board.c +++ b/board/xilinx/zynq/board.c @@ -20,6 +20,7 @@ Xilinx_desc fpga010 = XILINX_XC7Z010_DESC(0x10); Xilinx_desc fpga020 = XILINX_XC7Z020_DESC(0x20); Xilinx_desc fpga030 = XILINX_XC7Z030_DESC(0x30); Xilinx_desc fpga045 = XILINX_XC7Z045_DESC(0x45); +Xilinx_desc fpga100 = XILINX_XC7Z100_DESC(0x100); #endif int board_init(void) @@ -42,6 +43,9 @@ int board_init(void) case XILINX_ZYNQ_7045: fpga = fpga045; break; + case XILINX_ZYNQ_7100: + fpga = fpga100; + break; } #endif |