diff options
Diffstat (limited to 'boot/bootmeth_efi.c')
-rw-r--r-- | boot/bootmeth_efi.c | 220 |
1 files changed, 209 insertions, 11 deletions
diff --git a/boot/bootmeth_efi.c b/boot/bootmeth_efi.c index d5438eb67b9..67c972e3fe4 100644 --- a/boot/bootmeth_efi.c +++ b/boot/bootmeth_efi.c @@ -19,6 +19,7 @@ #include <malloc.h> #include <mapmem.h> #include <mmc.h> +#include <net.h> #include <pxe_utils.h> #define EFI_DIRNAME "efi/boot/" @@ -59,6 +60,40 @@ static int get_efi_leafname(char *str, int max_len) return 0; } +static int get_efi_pxe_arch(void) +{ + /* http://www.iana.org/assignments/dhcpv6-parameters/dhcpv6-parameters.xml */ + if (IS_ENABLED(CONFIG_ARM64)) + return 0xb; + else if (IS_ENABLED(CONFIG_ARM)) + return 0xa; + else if (IS_ENABLED(CONFIG_X86_64)) + return 0x6; + else if (IS_ENABLED(CONFIG_X86)) + return 0x7; + else if (IS_ENABLED(CONFIG_ARCH_RV32I)) + return 0x19; + else if (IS_ENABLED(CONFIG_ARCH_RV64I)) + return 0x1b; + else if (IS_ENABLED(CONFIG_SANDBOX)) + return 0; /* not used */ + + return -EINVAL; +} + +static int get_efi_pxe_vci(char *str, int max_len) +{ + int ret; + + ret = get_efi_pxe_arch(); + if (ret < 0) + return ret; + + snprintf(str, max_len, "PXEClient:Arch:%05x:UNDI:003000", ret); + + return 0; +} + static int efiload_read_file(struct blk_desc *desc, struct bootflow *bflow) { const struct udevice *media_dev; @@ -101,20 +136,44 @@ static int efiload_read_file(struct blk_desc *desc, struct bootflow *bflow) static int distro_efi_check(struct udevice *dev, struct bootflow_iter *iter) { - int ret; + /* This only works on block and network devices */ + if (bootflow_iter_check_blk(iter) && bootflow_iter_check_net(iter)) + return log_msg_ret("blk", -ENOTSUPP); - /* This only works on block devices */ - ret = bootflow_iter_uses_blk_dev(iter); - if (ret) - return log_msg_ret("blk", ret); + /* This works on block devices and network devices */ + if (iter->method_flags & BOOTFLOW_METHF_PXE_ONLY) + return log_msg_ret("pxe", -ENOTSUPP); return 0; } -static int distro_efi_read_bootflow(struct udevice *dev, struct bootflow *bflow) +static void distro_efi_get_fdt_name(char *fname, int size) +{ + const char *fdt_fname; + + fdt_fname = env_get("fdtfile"); + if (fdt_fname) { + snprintf(fname, size, "dtb/%s", fdt_fname); + log_debug("Using device tree: %s\n", fname); + } else { + const char *soc = env_get("soc"); + const char *board = env_get("board"); + const char *boardver = env_get("boardver"); + + /* cf the code in label_boot() which seems very complex */ + snprintf(fname, size, "dtb/%s%s%s%s.dtb", + soc ? soc : "", soc ? "-" : "", board ? board : "", + boardver ? boardver : ""); + log_debug("Using default device tree: %s\n", fname); + } +} + +static int distro_efi_read_bootflow_file(struct udevice *dev, + struct bootflow *bflow) { struct blk_desc *desc = NULL; - char fname[sizeof(EFI_DIRNAME) + 16]; + ulong fdt_addr, size; + char fname[256]; int ret; /* We require a partition table */ @@ -137,20 +196,159 @@ static int distro_efi_read_bootflow(struct udevice *dev, struct bootflow *bflow) if (ret) return log_msg_ret("read", -EINVAL); + distro_efi_get_fdt_name(fname, sizeof(fname)); + bflow->fdt_fname = strdup(fname); + if (!bflow->fdt_fname) + return log_msg_ret("fil", -ENOMEM); + + fdt_addr = env_get_hex("fdt_addr_r", 0); + ret = bootmeth_common_read_file(dev, bflow, fname, fdt_addr, &size); + if (!ret) { + bflow->fdt_size = size; + bflow->fdt_addr = fdt_addr; + + /* + * TODO: Apply extension overlay + * + * Here we need to load and apply the extension overlay. This is + * not implemented. See do_extension_apply(). The extension + * stuff needs an implementation in boot/extension.c so it is + * separate from the command code. Really the extension stuff + * should use the device tree and a uclass / driver interface + * rather than implementing its own list + */ + } else { + log_debug("No device tree available\n"); + } + + return 0; +} + +static int distro_efi_read_bootflow_net(struct bootflow *bflow) +{ + char file_addr[17], fname[256]; + char *tftp_argv[] = {"tftp", file_addr, fname, NULL}; + struct cmd_tbl cmdtp = {}; /* dummy */ + const char *addr_str, *fdt_addr_str; + int ret, arch, size; + ulong addr, fdt_addr; + char str[36]; + + ret = get_efi_pxe_vci(str, sizeof(str)); + if (ret) + return log_msg_ret("vci", ret); + ret = get_efi_pxe_arch(); + if (ret < 0) + return log_msg_ret("arc", ret); + arch = ret; + + ret = env_set("bootp_vci", str); + if (ret) + return log_msg_ret("vcs", ret); + ret = env_set_ulong("bootp_arch", arch); + if (ret) + return log_msg_ret("ars", ret); + + /* figure out the load address */ + addr_str = env_get("kernel_addr_r"); + addr = addr_str ? hextoul(addr_str, NULL) : image_load_addr; + + /* clear any previous bootfile */ + env_set("bootfile", NULL); + + /* read the kernel */ + ret = dhcp_run(addr, NULL, true); + if (ret) + return log_msg_ret("dhc", ret); + + size = env_get_hex("filesize", -1); + if (size <= 0) + return log_msg_ret("sz", -EINVAL); + bflow->size = size; + + /* do the hideous EFI hack */ + efi_set_bootdev("Net", "", bflow->fname, map_sysmem(addr, 0), + bflow->size); + + /* read the DT file also */ + fdt_addr_str = env_get("fdt_addr_r"); + if (!fdt_addr_str) + return log_msg_ret("fdt", -EINVAL); + fdt_addr = hextoul(fdt_addr_str, NULL); + sprintf(file_addr, "%lx", fdt_addr); + + distro_efi_get_fdt_name(fname, sizeof(fname)); + bflow->fdt_fname = strdup(fname); + if (!bflow->fdt_fname) + return log_msg_ret("fil", -ENOMEM); + + if (!do_tftpb(&cmdtp, 0, 3, tftp_argv)) { + bflow->fdt_size = env_get_hex("filesize", 0); + bflow->fdt_addr = fdt_addr; + } else { + log_debug("No device tree available\n"); + } + + bflow->state = BOOTFLOWST_READY; + + return 0; +} + +static int distro_efi_read_bootflow(struct udevice *dev, struct bootflow *bflow) +{ + const struct udevice *media = dev_get_parent(bflow->dev); + int ret; + + if (IS_ENABLED(CONFIG_CMD_DHCP) && + device_get_uclass_id(media) == UCLASS_ETH) { + /* we only support reading from one device, so ignore 'dev' */ + ret = distro_efi_read_bootflow_net(bflow); + if (ret) + return log_msg_ret("net", ret); + } else { + ret = distro_efi_read_bootflow_file(dev, bflow); + if (ret) + return log_msg_ret("blk", ret); + } + return 0; } int distro_efi_boot(struct udevice *dev, struct bootflow *bflow) { + ulong kernel, fdt; char cmd[50]; + /* A non-zero buffer indicates the kernel is there */ + if (bflow->buf) { + kernel = (ulong)map_to_sysmem(bflow->buf); + + /* + * use the provided device tree if available, else fall back to + * the control FDT + */ + if (bflow->fdt_fname) + fdt = bflow->fdt_addr; + else + fdt = (ulong)map_to_sysmem(gd->fdt_blob); + } else { + /* + * This doesn't actually work for network devices: + * + * do_bootefi_image() No UEFI binary known at 0x02080000 + * + * But this is the same behaviour for distro boot, so it can be + * fixed here. + */ + kernel = env_get_hex("kernel_addr_r", 0); + fdt = env_get_hex("fdt_addr_r", 0); + } + /* * At some point we can add a real interface to bootefi so we can call - * this directly. For now, go through the CLI like distro boot. + * this directly. For now, go through the CLI, like distro boot. */ - snprintf(cmd, sizeof(cmd), "bootefi %lx %lx", - (ulong)map_to_sysmem(bflow->buf), - (ulong)map_to_sysmem(gd->fdt_blob)); + snprintf(cmd, sizeof(cmd), "bootefi %lx %lx", kernel, fdt); if (run_command(cmd, 0)) return log_msg_ret("run", -EINVAL); |