diff options
Diffstat (limited to 'cmd/eeprom.c')
| -rw-r--r-- | cmd/eeprom.c | 307 |
1 files changed, 223 insertions, 84 deletions
diff --git a/cmd/eeprom.c b/cmd/eeprom.c index 322765ad02a..cf89cfce3e4 100644 --- a/cmd/eeprom.c +++ b/cmd/eeprom.c @@ -19,12 +19,14 @@ * */ -#include <common.h> #include <config.h> #include <command.h> +#include <dm.h> #include <eeprom.h> #include <i2c.h> +#include <i2c_eeprom.h> #include <eeprom_layout.h> +#include <vsprintf.h> #include <linux/delay.h> #ifndef I2C_RXTX_LEN @@ -208,41 +210,95 @@ static long parse_numeric_param(char *str) return (*endptr != '\0') ? -1 : value; } +struct eeprom_dev_spec { +#if CONFIG_IS_ENABLED(I2C_EEPROM) + struct udevice *dev; +#endif + int i2c_bus; + ulong i2c_addr; +}; + +static void eeprom_dev_spec_init(struct eeprom_dev_spec *dev) +{ +#if CONFIG_IS_ENABLED(I2C_EEPROM) + if (!dev->dev) +#endif + eeprom_init(dev->i2c_bus); +} + +static int eeprom_dev_spec_read(struct eeprom_dev_spec *dev, + unsigned offset, uchar *buffer, unsigned cnt) +{ +#if CONFIG_IS_ENABLED(I2C_EEPROM) + if (dev->dev) + return i2c_eeprom_read(dev->dev, offset, buffer, cnt); +#endif + return eeprom_read(dev->i2c_addr, offset, buffer, cnt); +} + +static int eeprom_dev_spec_write(struct eeprom_dev_spec *dev, + unsigned offset, uchar *buffer, unsigned cnt) +{ +#if CONFIG_IS_ENABLED(I2C_EEPROM) + if (dev->dev) + return i2c_eeprom_write(dev->dev, offset, buffer, cnt); +#endif + return eeprom_write(dev->i2c_addr, offset, buffer, cnt); +} + /** - * parse_i2c_bus_addr - parse the i2c bus and i2c devaddr parameters + * parse_eeprom_dev_spec - parse the eeprom device specifier * - * @i2c_bus: address to store the i2c bus - * @i2c_addr: address to store the device i2c address - * @argc: count of command line arguments left to parse + * @dev: pointer to eeprom device specifier + * @argc: count of command line arguments that can be used to parse + * the device specifier * @argv: command line arguments left to parse - * @argc_no_bus_addr: argc value we expect to see when bus & addr aren't given * * @returns: number of arguments parsed or CMD_RET_USAGE if error */ -static int parse_i2c_bus_addr(int *i2c_bus, ulong *i2c_addr, int argc, - char *const argv[], int argc_no_bus_addr) +static int parse_eeprom_dev_spec(struct eeprom_dev_spec *dev, int argc, + char *const argv[]) { - int argc_no_bus = argc_no_bus_addr + 1; - int argc_bus_addr = argc_no_bus_addr + 2; +#if CONFIG_IS_ENABLED(I2C_EEPROM) + if (argc == 0) { + if (!uclass_first_device_err(UCLASS_I2C_EEPROM, &dev->dev)) + return 0; + } + + if (argc == 1) { + if (!uclass_get_device_by_name(UCLASS_I2C_EEPROM, argv[0], + &dev->dev)) + return 1; + + /* + * If we could not find the device by name and the parameter is + * not numeric (and so won't be handled later), fail. + */ + if (parse_numeric_param(argv[0]) == -1) { + printf("Can't get eeprom device: %s\n", argv[0]); + return CMD_RET_USAGE; + } + } +#endif #ifdef CONFIG_SYS_I2C_EEPROM_ADDR - if (argc == argc_no_bus_addr) { - *i2c_bus = -1; - *i2c_addr = CONFIG_SYS_I2C_EEPROM_ADDR; + if (argc == 0) { + dev->i2c_bus = -1; + dev->i2c_addr = CONFIG_SYS_I2C_EEPROM_ADDR; return 0; } #endif - if (argc == argc_no_bus) { - *i2c_bus = -1; - *i2c_addr = parse_numeric_param(argv[0]); + if (argc == 1) { + dev->i2c_bus = -1; + dev->i2c_addr = parse_numeric_param(argv[0]); return 1; } - if (argc == argc_bus_addr) { - *i2c_bus = parse_numeric_param(argv[0]); - *i2c_addr = parse_numeric_param(argv[1]); + if (argc == 2) { + dev->i2c_bus = parse_numeric_param(argv[0]); + dev->i2c_addr = parse_numeric_param(argv[1]); return 2; } @@ -252,16 +308,19 @@ static int parse_i2c_bus_addr(int *i2c_bus, ulong *i2c_addr, int argc, #ifdef CONFIG_CMD_EEPROM_LAYOUT +#ifdef CONFIG_EEPROM_LAYOUT_VERSIONS __weak int eeprom_parse_layout_version(char *str) { return LAYOUT_VERSION_UNRECOGNIZED; } +#endif static unsigned char eeprom_buf[CONFIG_SYS_EEPROM_SIZE]; #endif enum eeprom_action { + EEPROM_LIST, EEPROM_READ, EEPROM_WRITE, EEPROM_PRINT, @@ -271,6 +330,10 @@ enum eeprom_action { static enum eeprom_action parse_action(char *cmd) { +#if CONFIG_IS_ENABLED(I2C_EEPROM) + if (!strncmp(cmd, "list", 4)) + return EEPROM_LIST; +#endif if (!strncmp(cmd, "read", 4)) return EEPROM_READ; if (!strncmp(cmd, "write", 5)) @@ -285,68 +348,115 @@ static enum eeprom_action parse_action(char *cmd) return EEPROM_ACTION_INVALID; } -static int eeprom_execute_command(enum eeprom_action action, int i2c_bus, - ulong i2c_addr, int layout_ver, char *key, - char *value, ulong addr, ulong off, ulong cnt) +#if CONFIG_IS_ENABLED(I2C_EEPROM) +static int do_eeprom_list(void) +{ + struct udevice *dev; + struct uclass *uc; + int err; + + err = uclass_get(UCLASS_I2C_EEPROM, &uc); + if (err) + return CMD_RET_FAILURE; + + uclass_foreach_dev(dev, uc) + printf("%s (%s)\n", dev->name, dev->driver->name); + + return CMD_RET_SUCCESS; +} +#endif + +static int do_eeprom_rw(struct eeprom_dev_spec *dev, bool read, + ulong addr, ulong off, ulong cnt) { - int rcode = 0; const char *const fmt = "\nEEPROM @0x%lX %s: addr 0x%08lx off 0x%04lx count %ld ... "; + uchar *memloc = (uchar *)addr; + int ret; + + printf(fmt, dev->i2c_addr, read ? "read" : "write", addr, off, cnt); + if (read) + ret = eeprom_dev_spec_read(dev, off, memloc, cnt); + else + ret = eeprom_dev_spec_write(dev, off, memloc, cnt); + puts("done\n"); + + return ret; +} + #ifdef CONFIG_CMD_EEPROM_LAYOUT - struct eeprom_layout layout; -#endif - if (action == EEPROM_ACTION_INVALID) - return CMD_RET_USAGE; +static int do_eeprom_layout(struct eeprom_dev_spec *dev, int layout_ver, + struct eeprom_layout *layout) +{ + eeprom_layout_setup(layout, eeprom_buf, CONFIG_SYS_EEPROM_SIZE, + layout_ver); - eeprom_init(i2c_bus); - if (action == EEPROM_READ) { - printf(fmt, i2c_addr, "read", addr, off, cnt); + return eeprom_dev_spec_read(dev, 0, eeprom_buf, layout->data_size); +} - rcode = eeprom_read(i2c_addr, off, (uchar *)addr, cnt); +static int do_eeprom_print(struct eeprom_dev_spec *dev, int layout_ver) +{ + struct eeprom_layout layout; + int ret; - puts("done\n"); - return rcode; - } else if (action == EEPROM_WRITE) { - printf(fmt, i2c_addr, "write", addr, off, cnt); + ret = do_eeprom_layout(dev, layout_ver, &layout); + if (ret) + return ret; - rcode = eeprom_write(i2c_addr, off, (uchar *)addr, cnt); + layout.print(&layout); - puts("done\n"); - return rcode; - } + return 0; +} -#ifdef CONFIG_CMD_EEPROM_LAYOUT - rcode = eeprom_read(i2c_addr, 0, eeprom_buf, CONFIG_SYS_EEPROM_SIZE); - if (rcode < 0) - return rcode; +static int do_eeprom_update(struct eeprom_dev_spec *dev, int layout_ver, + char *key, char *value) +{ + struct eeprom_layout layout; + int ret; - eeprom_layout_setup(&layout, eeprom_buf, CONFIG_SYS_EEPROM_SIZE, - layout_ver); + ret = do_eeprom_layout(dev, layout_ver, &layout); + if (ret) + return ret; - if (action == EEPROM_PRINT) { - layout.print(&layout); - return 0; - } + ret = layout.update(&layout, key, value); + if (ret) + return CMD_RET_FAILURE; - layout.update(&layout, key, value); + return eeprom_dev_spec_write(dev, 0, layout.data, layout.data_size); +} - rcode = eeprom_write(i2c_addr, 0, layout.data, CONFIG_SYS_EEPROM_SIZE); #endif - return rcode; +static int eeprom_action_expected_argc(enum eeprom_action action) +{ + switch (action) { + case EEPROM_LIST: + return 0; + case EEPROM_READ: + case EEPROM_WRITE: + return 3; + case EEPROM_PRINT: + return 0; + case EEPROM_UPDATE: + return 2; + default: + return CMD_RET_USAGE; + } } #define NEXT_PARAM(argc, index) { (argc)--; (index)++; } int do_eeprom(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]) { - int layout_ver = LAYOUT_VERSION_AUTODETECT; enum eeprom_action action = EEPROM_ACTION_INVALID; - int i2c_bus = -1, index = 0; - ulong i2c_addr = -1, addr = 0, cnt = 0, off = 0; - int ret; + struct eeprom_dev_spec dev; + ulong addr = 0, cnt = 0, off = 0; + int ret, index = 0; +#ifdef CONFIG_CMD_EEPROM_LAYOUT char *field_name = ""; char *field_value = ""; + int layout_ver = LAYOUT_VERSION_AUTODETECT; +#endif if (argc <= 1) return CMD_RET_USAGE; @@ -359,7 +469,12 @@ int do_eeprom(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]) if (action == EEPROM_ACTION_INVALID) return CMD_RET_USAGE; -#ifdef CONFIG_CMD_EEPROM_LAYOUT +#if CONFIG_IS_ENABLED(I2C_EEPROM) + if (action == EEPROM_LIST) + return do_eeprom_list(); +#endif + +#ifdef CONFIG_EEPROM_LAYOUT_VERSIONS if (action == EEPROM_PRINT || action == EEPROM_UPDATE) { if (!strcmp(argv[index], "-l")) { NEXT_PARAM(argc, index); @@ -369,25 +484,9 @@ int do_eeprom(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]) } #endif - switch (action) { - case EEPROM_READ: - case EEPROM_WRITE: - ret = parse_i2c_bus_addr(&i2c_bus, &i2c_addr, argc, - argv + index, 3); - break; - case EEPROM_PRINT: - ret = parse_i2c_bus_addr(&i2c_bus, &i2c_addr, argc, - argv + index, 0); - break; - case EEPROM_UPDATE: - ret = parse_i2c_bus_addr(&i2c_bus, &i2c_addr, argc, - argv + index, 2); - break; - default: - /* Get compiler to stop whining */ - return CMD_RET_USAGE; - } - + ret = parse_eeprom_dev_spec(&dev, + argc - eeprom_action_expected_argc(action), + argv + index); if (ret == CMD_RET_USAGE) return ret; @@ -411,24 +510,64 @@ int do_eeprom(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]) } #endif - return eeprom_execute_command(action, i2c_bus, i2c_addr, layout_ver, - field_name, field_value, addr, off, cnt); + eeprom_dev_spec_init(&dev); + + switch (action) { + case EEPROM_READ: + case EEPROM_WRITE: + return do_eeprom_rw(&dev, action == EEPROM_READ, + addr, off, cnt); +#ifdef CONFIG_CMD_EEPROM_LAYOUT + case EEPROM_PRINT: + return do_eeprom_print(&dev, layout_ver); + case EEPROM_UPDATE: + return do_eeprom_update(&dev, layout_ver, + field_name, field_value); +#endif + default: + return CMD_RET_USAGE; + } } +#ifdef CONFIG_EEPROM_LAYOUT_VERSIONS +#define EEPROM_LAYOUT_SPEC "[-l <layout_version>] " +#else +#define EEPROM_LAYOUT_SPEC "" +#endif + +#if CONFIG_IS_ENABLED(I2C_EEPROM) +# define EEPROM_DEV_SPEC "[device_specifier]" +#else +# define EEPROM_DEV_SPEC "[[bus] devaddr]" +#endif + U_BOOT_CMD( eeprom, 8, 1, do_eeprom, "EEPROM sub-system", - "read <bus> <devaddr> addr off cnt\n" - "eeprom write <bus> <devaddr> addr off cnt\n" +#if CONFIG_IS_ENABLED(I2C_EEPROM) + "list\n" + "eeprom " +#endif + "read " EEPROM_DEV_SPEC " addr off cnt\n" + "eeprom write " EEPROM_DEV_SPEC " addr off cnt\n" " - read/write `cnt' bytes from `devaddr` EEPROM at offset `off'" #ifdef CONFIG_CMD_EEPROM_LAYOUT "\n" - "eeprom print [-l <layout_version>] <bus> <devaddr>\n" + "eeprom print " EEPROM_LAYOUT_SPEC EEPROM_DEV_SPEC "\n" " - Print layout fields and their data in human readable format\n" - "eeprom update [-l <layout_version>] <bus> <devaddr> field_name field_value\n" + "eeprom update " EEPROM_LAYOUT_SPEC EEPROM_DEV_SPEC " field_name field_value\n" " - Update a specific eeprom field with new data.\n" - " The new data must be written in the same human readable format as shown by the print command.\n" - "\n" + " The new data must be written in the same human readable format as shown by the print command." +#endif +#if CONFIG_IS_ENABLED(I2C_EEPROM) + "\n\n" + "DEVICE SPECIFIER - the eeprom device can be specified\n" + " [dev_name] - by device name (devices can listed with the eeprom list command)\n" + " [[bus] devaddr] - or by I2C bus and I2C device address\n" + "If no device specifier is given, the first driver-model found device is used." +#endif +#ifdef CONFIG_EEPROM_LAYOUT_VERSIONS + "\n\n" "LAYOUT VERSIONS\n" "The -l option can be used to force the command to interpret the EEPROM data using the chosen layout.\n" "If the -l option is omitted, the command will auto detect the layout based on the data in the EEPROM.\n" |