diff options
Diffstat (limited to 'common/board_f.c')
| -rw-r--r-- | common/board_f.c | 230 |
1 files changed, 121 insertions, 109 deletions
diff --git a/common/board_f.c b/common/board_f.c index c4561874496..bff465d9cb2 100644 --- a/common/board_f.c +++ b/common/board_f.c @@ -38,6 +38,7 @@ #include <spl.h> #include <status_led.h> #include <sysreset.h> +#include <time.h> #include <timer.h> #include <trace.h> #include <upl.h> @@ -476,6 +477,13 @@ static int reserve_trace(void) static int reserve_uboot(void) { + /* + * This should be the first place GD_FLG_SKIP_RELOC is read from. + * Set GD_FLG_SKIP_RELOC flag if CONFIG_SKIP_RELOCATE is enabled. + */ + if (CONFIG_IS_ENABLED(SKIP_RELOCATE)) + gd->flags |= GD_FLG_SKIP_RELOC; + if (!(gd->flags & GD_FLG_SKIP_RELOC)) { /* * reserve memory for U-Boot code, data & bss @@ -753,7 +761,7 @@ static int setup_reloc(void) return 0; } -#ifdef CONFIG_OF_BOARD_FIXUP +#if CONFIG_IS_ENABLED(OF_BOARD_FIXUP) static int fix_fdt(void) { return board_fix_fdt((void *)gd->fdt_blob); @@ -881,81 +889,86 @@ static int initf_upl(void) return 0; } -static const init_fnc_t init_sequence_f[] = { - setup_mon_len, -#ifdef CONFIG_OF_CONTROL - fdtdec_setup, +static void initcall_run_f(void) +{ + /* + * Please do not add logic to this function (variables, if (), etc.). + * For simplicity it should remain an ordered list of function calls. + */ + INITCALL(setup_mon_len); +#if CONFIG_IS_ENABLED(OF_CONTROL) + INITCALL(fdtdec_setup); #endif -#ifdef CONFIG_TRACE_EARLY - trace_early_init, +#if CONFIG_IS_ENABLED(TRACE_EARLY) + INITCALL(trace_early_init); #endif - initf_malloc, - initf_upl, - log_init, - initf_bootstage, /* uses its own timer, so does not need DM */ - event_init, - bloblist_maybe_init, - setup_spl_handoff, -#if defined(CONFIG_CONSOLE_RECORD_INIT_F) - console_record_init, + INITCALL(initf_malloc); + INITCALL(initf_upl); + INITCALL(log_init); + INITCALL(initf_bootstage); /* uses its own timer, so does not need DM */ + INITCALL(event_init); + INITCALL(bloblist_maybe_init); + INITCALL(setup_spl_handoff); +#if CONFIG_IS_ENABLED(CONSOLE_RECORD_INIT_F) + INITCALL(console_record_init); #endif - INITCALL_EVENT(EVT_FSP_INIT_F), - arch_cpu_init, /* basic arch cpu dependent setup */ - mach_cpu_init, /* SoC/machine dependent CPU setup */ - initf_dm, -#if defined(CONFIG_BOARD_EARLY_INIT_F) - board_early_init_f, + INITCALL_EVT(EVT_FSP_INIT_F); + INITCALL(arch_cpu_init); /* basic arch cpu dependent setup */ + INITCALL(mach_cpu_init); /* SoC/machine dependent CPU setup */ + INITCALL(initf_dm); +#if CONFIG_IS_ENABLED(BOARD_EARLY_INIT_F) + INITCALL(board_early_init_f); #endif #if defined(CONFIG_PPC) || defined(CONFIG_SYS_FSL_CLK) || defined(CONFIG_M68K) /* get CPU and bus clocks according to the environment variable */ - get_clocks, /* get CPU and bus clocks (etc.) */ + INITCALL(get_clocks); /* get CPU and bus clocks (etc.) */ #endif #if !defined(CONFIG_M68K) || (defined(CONFIG_M68K) && !defined(CONFIG_MCFTMR)) - timer_init, /* initialize timer */ + INITCALL(timer_init); /* initialize timer */ #endif -#if defined(CONFIG_BOARD_POSTCLK_INIT) - board_postclk_init, +#if CONFIG_IS_ENABLED(BOARD_POSTCLK_INIT) + INITCALL(board_postclk_init); #endif - env_init, /* initialize environment */ - init_baud_rate, /* initialze baudrate settings */ - serial_init, /* serial communications setup */ - console_init_f, /* stage 1 init of console */ - display_options, /* say that we are here */ - display_text_info, /* show debugging info if required */ - checkcpu, -#if defined(CONFIG_SYSRESET) - print_resetinfo, + INITCALL(env_init); /* initialize environment */ + INITCALL(init_baud_rate); /* initialze baudrate settings */ + INITCALL(serial_init); /* serial communications setup */ + INITCALL(console_init_f); /* stage 1 init of console */ + INITCALL(display_options); /* say that we are here */ + INITCALL(display_text_info); /* show debugging info if required */ + INITCALL(checkcpu); +#if CONFIG_IS_ENABLED(SYSRESET) + INITCALL(print_resetinfo); #endif -#if defined(CONFIG_DISPLAY_CPUINFO) - print_cpuinfo, /* display cpu info (and speed) */ + /* display cpu info (and speed) */ +#if CONFIG_IS_ENABLED(DISPLAY_CPUINFO) + INITCALL(print_cpuinfo); #endif -#if defined(CONFIG_DTB_RESELECT) - embedded_dtb_select, +#if CONFIG_IS_ENABLED(DTB_RESELECT) + INITCALL(embedded_dtb_select); #endif -#if defined(CONFIG_DISPLAY_BOARDINFO) - show_board_info, +#if CONFIG_IS_ENABLED(DISPLAY_BOARDINFO) + INITCALL(show_board_info); #endif - INIT_FUNC_WATCHDOG_INIT - INITCALL_EVENT(EVT_MISC_INIT_F), - INIT_FUNC_WATCHDOG_RESET + WATCHDOG_INIT(); + INITCALL_EVT(EVT_MISC_INIT_F); + WATCHDOG_RESET(); #if CONFIG_IS_ENABLED(SYS_I2C_LEGACY) - init_func_i2c, + INITCALL(init_func_i2c); #endif - announce_dram_init, - dram_init, /* configure available RAM banks */ -#ifdef CONFIG_POST - post_init_f, + INITCALL(announce_dram_init); + INITCALL(dram_init); /* configure available RAM banks */ +#if CONFIG_IS_ENABLED(POST) + INITCALL(post_init_f); #endif - INIT_FUNC_WATCHDOG_RESET + WATCHDOG_RESET(); #if defined(CFG_SYS_DRAM_TEST) - testdram, + INITCALL(testdram); #endif /* CFG_SYS_DRAM_TEST */ - INIT_FUNC_WATCHDOG_RESET - -#ifdef CONFIG_POST - init_post, + WATCHDOG_RESET(); +#if CONFIG_IS_ENABLED(POST) + INITCALL(init_post); #endif - INIT_FUNC_WATCHDOG_RESET + WATCHDOG_RESET(); /* * Now that we have DRAM mapped and working, we can * relocate the code and continue running from DRAM. @@ -968,48 +981,51 @@ static const init_fnc_t init_sequence_f[] = { * - monitor code * - board info struct */ - setup_dest_addr, -#if defined(CONFIG_OF_BOARD_FIXUP) && !defined(CONFIG_OF_INITIAL_DTB_READONLY) - fix_fdt, + INITCALL(setup_dest_addr); +#if CONFIG_IS_ENABLED(OF_BOARD_FIXUP) && \ + !CONFIG_IS_ENABLED(OF_INITIAL_DTB_READONLY) + INITCALL(fix_fdt); #endif #ifdef CFG_PRAM - reserve_pram, + INITCALL(reserve_pram); #endif - reserve_round_4k, - setup_relocaddr_from_bloblist, - arch_reserve_mmu, - reserve_video, - reserve_trace, - reserve_uboot, - reserve_malloc, - reserve_board, - reserve_global_data, - reserve_fdt, -#if defined(CONFIG_OF_BOARD_FIXUP) && defined(CONFIG_OF_INITIAL_DTB_READONLY) - reloc_fdt, - fix_fdt, + INITCALL(reserve_round_4k); + INITCALL(setup_relocaddr_from_bloblist); + INITCALL(arch_reserve_mmu); + INITCALL(reserve_video); + INITCALL(reserve_trace); + INITCALL(reserve_uboot); + INITCALL(reserve_malloc); + INITCALL(reserve_board); + INITCALL(reserve_global_data); + INITCALL(reserve_fdt); +#if CONFIG_IS_ENABLED(OF_BOARD_FIXUP) && \ + CONFIG_IS_ENABLED(OF_INITIAL_DTB_READONLY) + INITCALL(reloc_fdt); + INITCALL(fix_fdt); #endif - reserve_bootstage, - reserve_bloblist, - reserve_arch, - reserve_stacks, - dram_init_banksize, - show_dram_config, - INIT_FUNC_WATCHDOG_RESET - setup_bdinfo, - display_new_sp, - INIT_FUNC_WATCHDOG_RESET -#if !defined(CONFIG_OF_BOARD_FIXUP) || !defined(CONFIG_OF_INITIAL_DTB_READONLY) - reloc_fdt, + INITCALL(reserve_bootstage); + INITCALL(reserve_bloblist); + INITCALL(reserve_arch); + INITCALL(reserve_stacks); + INITCALL(dram_init_banksize); + INITCALL(show_dram_config); + WATCHDOG_RESET(); + INITCALL(setup_bdinfo); + INITCALL(display_new_sp); + WATCHDOG_RESET(); +#if !CONFIG_IS_ENABLED(OF_BOARD_FIXUP) || \ + !CONFIG_IS_ENABLED(INITIAL_DTB_READONLY) + INITCALL(reloc_fdt); #endif - reloc_bootstage, - reloc_bloblist, - setup_reloc, -#if defined(CONFIG_X86) || defined(CONFIG_ARC) - copy_uboot_to_ram, - do_elf_reloc_fixups, + INITCALL(reloc_bootstage); + INITCALL(reloc_bloblist); + INITCALL(setup_reloc); +#if CONFIG_IS_ENABLED(X86) || CONFIG_IS_ENABLED(ARC) + INITCALL(copy_uboot_to_ram); + INITCALL(do_elf_reloc_fixups); #endif - clear_bss, + INITCALL(clear_bss); /* * Deregister all cyclic functions before relocation, so that * gd->cyclic_list does not contain any references to pre-relocation @@ -1019,12 +1035,11 @@ static const init_fnc_t init_sequence_f[] = { * This should happen as late as possible so that the window where a * watchdog device is not serviced is as small as possible. */ - cyclic_unregister_all, -#if !defined(CONFIG_ARM) && !defined(CONFIG_SANDBOX) - jump_to_copy, + INITCALL(cyclic_unregister_all); +#if !CONFIG_IS_ENABLED(ARM) && !CONFIG_IS_ENABLED(SANDBOX) + INITCALL(jump_to_copy); #endif - NULL, -}; +} void board_init_f(ulong boot_flags) { @@ -1034,8 +1049,7 @@ void board_init_f(ulong boot_flags) gd->flags &= ~GD_FLG_HAVE_CONSOLE; gd->boardf = &boardf; - if (initcall_run_list(init_sequence_f)) - hang(); + initcall_run_f(); #if !defined(CONFIG_ARM) && !defined(CONFIG_SANDBOX) && \ !defined(CONFIG_EFI_APP) && !CONFIG_IS_ENABLED(X86_64) && \ @@ -1049,8 +1063,8 @@ void board_init_f(ulong boot_flags) /* * For now this code is only used on x86. * - * init_sequence_f_r is the list of init functions which are run when - * U-Boot is executing from Flash with a semi-limited 'C' environment. + * Run init functions which are run when U-Boot is executing from Flash with a + * semi-limited 'C' environment. * The following limitations must be considered when implementing an * '_f_r' function: * - 'static' variables are read-only @@ -1063,18 +1077,16 @@ void board_init_f(ulong boot_flags) * NOTE: At present only x86 uses this route, but it is intended that * all archs will move to this when generic relocation is implemented. */ -static const init_fnc_t init_sequence_f_r[] = { -#if !CONFIG_IS_ENABLED(X86_64) - init_cache_f_r, +static void initcall_run_f_r(void) +{ +#if CONFIG_IS_ENABLED(X86_64) + INITCALL(init_cache_f_r); #endif - - NULL, -}; +} void board_init_f_r(void) { - if (initcall_run_list(init_sequence_f_r)) - hang(); + initcall_run_f_r(); /* * The pre-relocation drivers may be using memory that has now gone |