diff options
Diffstat (limited to 'common/spl/Kconfig')
| -rw-r--r-- | common/spl/Kconfig | 50 |
1 files changed, 43 insertions, 7 deletions
diff --git a/common/spl/Kconfig b/common/spl/Kconfig index 94e118f8465..c08045f9c8d 100644 --- a/common/spl/Kconfig +++ b/common/spl/Kconfig @@ -80,11 +80,10 @@ config SPL_MAX_SIZE default 0x1b000 if AM33XX && !TI_SECURE_DEVICE default 0xec00 if OMAP34XX default 0x10000 if ARCH_MX6 && !MX6_OCRAM_256KB - default 0x7fa0 if SUNXI_SRAM_ADDRESS = 0x10000 - default 0x7fa0 if SUNXI_SRAM_ADDRESS = 0x20000 && !MACH_SUN50I_H616 default 0xbfa0 if MACH_SUN50I_H616 default 0x7000 if RCAR_GEN3 default 0x5fa0 if SUNXI_SRAM_ADDRESS = 0x0 + default 0x7fa0 if ARCH_SUNXI default 0x10000 if ASPEED_AST2600 default 0x27000 if IMX8MM && SPL_TEXT_BASE = 0x7E1000 default 0x30000 if ARCH_SC5XX && (SC59X_64 || SC59X) @@ -387,11 +386,29 @@ config SPL_SHARES_INIT_SP_ADDR both SPL and U-Boot itself. If you need to specify a different address however, say N here and then set a different value in CONFIG_SPL_STACK. -config SPL_STACK - hex "Initial stack pointer location" +config SPL_HAVE_INIT_STACK + bool "SPL requires a initial, fixed, stack-pointer location" depends on (ARM || ARCH_JZ47XX || MICROBLAZE || RISCV) && \ SPL_FRAMEWORK || ROCKCHIP_RK3036 depends on !SPL_SHARES_INIT_SP_ADDR + default y if ARCH_MX7 + default y if ARCH_MX6 && MX6_OCRAM_256KB + default y if ARCH_MX6 && !MX6_OCRAM_256KB + default y if MACH_SUN50I_H6 || MACH_SUN50I_H616 || MACH_SUN8I_R528 + default y if MACH_SUN50I || MACH_SUN50I_H5 + default y if MACH_SUN9I + default y if ARCH_SUNXI + default y if ARCH_SC5XX && (SC59X_64 || SC59X) + default y if ARCH_SC5XX && SC58X + default y if ARCH_SC5XX && SC57X + help + Enable if the SPL phase should not use inherit its initial + stack-pointer from the settings for U-Boot proper, but should set + its own value. + +config SPL_STACK + hex "Address of the initial stack-pointer for the SPL phase" + depends on SPL_HAVE_INIT_STACK default 0x946bb8 if ARCH_MX7 default 0x93ffb8 if ARCH_MX6 && MX6_OCRAM_256KB default 0x91ffb8 if ARCH_MX6 && !MX6_OCRAM_256KB @@ -401,9 +418,9 @@ config SPL_STACK default 0x54000 if MACH_SUN50I || MACH_SUN50I_H5 default 0x18000 if MACH_SUN9I default 0x8000 if ARCH_SUNXI - default 0x200E4000 if ARCH_SC5XX && (SC59X_64 || SC59X) - default 0x200B0000 if ARCH_SC5XX && SC58X - default 0x200D0000 if ARCH_SC5XX && SC57X + default 0x200e4000 if ARCH_SC5XX && (SC59X_64 || SC59X) + default 0x200b0000 if ARCH_SC5XX && SC58X + default 0x200d0000 if ARCH_SC5XX && SC57X help Address of the start of the stack SPL will use before SDRAM is initialized. @@ -1287,6 +1304,7 @@ config SPL_RAM_DEVICE config SPL_REMOTEPROC bool "Support REMOTEPROCS" + default y if (CPU_V7R && ARCH_K3) help Enable support for REMOTEPROCs in SPL. This permits to load a remote processor firmware in SPL. @@ -1431,6 +1449,24 @@ config SYS_SPI_U_BOOT_OFFS Address within SPI-Flash from where the u-boot payload is fetched from. +config SYS_SPI_KERNEL_OFFS + hex "Falcon mode: address of kernel payload in SPI flash" + depends on SPL_SPI_FLASH_SUPPORT && SPL_OS_BOOT + help + Address within SPI-Flash from where the kernel payload is fetched + in falcon boot. + +config SYS_SPI_ARGS_OFFS + hex "Falcon mode: address of args payload in SPI flash" + depends on SPL_SPI_FLASH_SUPPORT && SPL_OS_BOOT + help + Address within SPI-Flash from where the args payload (usually the + dtb) is fetched in falcon boot. + +config SYS_SPI_ARGS_SIZE + hex "Falcon mode: size of args payload in SPI flash" + depends on SPL_SPI_FLASH_SUPPORT && SPL_OS_BOOT + config SPL_THERMAL bool "Driver support for thermal devices" help |