diff options
Diffstat (limited to 'common')
| -rw-r--r-- | common/spl/Kconfig | 17 |
1 files changed, 15 insertions, 2 deletions
diff --git a/common/spl/Kconfig b/common/spl/Kconfig index 137f94a1681..c9a6d8410ed 100644 --- a/common/spl/Kconfig +++ b/common/spl/Kconfig @@ -87,6 +87,8 @@ config SPL_MAX_SIZE default 0x5fa0 if SUNXI_SRAM_ADDRESS = 0x0 default 0x10000 if ASPEED_AST2600 default 0x27000 if IMX8MM && SPL_TEXT_BASE = 0x7E1000 + default 0x30000 if ARCH_SC5XX && (SC59X_64 || SC59X) + default 0x20000 if ARCH_SC5XX && (SC58X || SC57X) default 0x0 help Maximum size of the SPL image (text, data, rodata, and linker lists @@ -111,7 +113,7 @@ config SPL_PAD_TO config SPL_HAS_BSS_LINKER_SECTION depends on SPL_FRAMEWORK bool "Use a specific address for the BSS via the linker script" - default y if ARCH_SUNXI || ARCH_MX6 || ARCH_OMAP2PLUS || MIPS || RISCV || ARCH_ZYNQMP + default y if ARCH_SUNXI || ARCH_MX6 || ARCH_OMAP2PLUS || MIPS || RISCV || ARCH_ZYNQMP || ARCH_SC5XX config SPL_BSS_START_ADDR hex "Link address for the BSS within the SPL binary" @@ -123,6 +125,9 @@ config SPL_BSS_START_ADDR default 0x4ff80000 if ARCH_SUNXI && !(MACH_SUN9I || MACH_SUNIV) default 0x2ff80000 if ARCH_SUNXI && MACH_SUN9I default 0x1000 if ARCH_ZYNQMP + default 0x200B0000 if ARCH_SC5XX && (SC59X_64 || SC59X) + default 0x20080000 if ARCH_SC5XX && SC58X + default 0x200A0000 if ARCH_SC5XX && SC57X choice prompt "Enforce SPL BSS limit" @@ -151,6 +156,7 @@ config SPL_BSS_MAX_SIZE depends on SPL_BSS_LIMIT default 0x100000 if ARCH_MX6 || RISCV default 0x80000 if ARCH_OMAP2PLUS || ARCH_SUNXI + default 0x10000 if ARCH_SC5XX help When non-zero, the linker checks that the actual memory used by SPL from __bss_start to __bss_end does not exceed it. @@ -270,6 +276,7 @@ config SPL_TEXT_BASE default 0x20060 if SUN50I_GEN_H6 || SUNXI_GEN_NCAT2 default 0x00060 if ARCH_SUNXI default 0xfffc0000 if ARCH_ZYNQMP + default 0x20080000 if ARCH_SC5XX default 0x0 help The address in memory that SPL will be running from. @@ -371,7 +378,7 @@ config SPL_SYS_MALLOC_SIMPLE config SPL_SHARES_INIT_SP_ADDR bool "SPL and U-Boot use the same initial stack pointer location" depends on (ARM || ARCH_JZ47XX || MICROBLAZE || RISCV) && SPL_FRAMEWORK - default n if ARCH_SUNXI || ARCH_MX6 || ARCH_MX7 + default n if ARCH_SUNXI || ARCH_MX6 || ARCH_MX7 || ARCH_SC5XX default y help In many cases, we can use the same initial stack pointer address for @@ -392,6 +399,9 @@ config SPL_STACK default 0x54000 if MACH_SUN50I || MACH_SUN50I_H5 default 0x18000 if MACH_SUN9I default 0x8000 if ARCH_SUNXI + default 0x200E4000 if ARCH_SC5XX && (SC59X_64 || SC59X) + default 0x200B0000 if ARCH_SC5XX && SC58X + default 0x200D0000 if ARCH_SC5XX && SC57X help Address of the start of the stack SPL will use before SDRAM is initialized. @@ -1134,6 +1144,9 @@ config SPL_PAYLOAD_ARGS_ADDR hex "Address in memory to load 'args' file for Falcon Mode to" depends on SPL_OS_BOOT || SPL_LOAD_FIT_OPENSBI_OS_BOOT default 0x88000000 if ARCH_OMAP2PLUS + default 0x99000000 if ARCH_SC5XX && SC59X_64 + default 0xA0000000 if ARCH_SC5XX && TARGET_SC594_SOM_EZKIT + default 0x80000000 if ARCH_SC5XX && TARGET_SC594_SOM_EZLITE help Address in memory where the 'args' file, typically a device tree will be loaded in to memory. |