diff options
Diffstat (limited to 'common')
| -rw-r--r-- | common/cmd_nand.c | 109 | ||||
| -rw-r--r-- | common/cmd_reginfo.c | 5 | ||||
| -rw-r--r-- | common/env_nand.c | 44 | ||||
| -rw-r--r-- | common/fdt_support.c | 129 | ||||
| -rw-r--r-- | common/lcd.c | 12 |
5 files changed, 163 insertions, 136 deletions
diff --git a/common/cmd_nand.c b/common/cmd_nand.c index ea80555ef89..84b6272950d 100644 --- a/common/cmd_nand.c +++ b/common/cmd_nand.c @@ -4,6 +4,10 @@ * (c) 1999 Machine Vision Holdings, Inc. * (c) 1999, 2000 David Woodhouse <dwmw2@infradead.org> * + * Ported 'dynenv' to 'nand env.oob' command + * (C) 2010 Nanometrics, Inc. + * 'dynenv' -- Dynamic environment offset in NAND OOB + * (C) Copyright 2006-2007 OpenMoko, Inc. * Added 16-bit nand support * (C) 2004 Texas Instruments */ @@ -193,6 +197,90 @@ static void do_nand_status(nand_info_t *nand) } #endif +#ifdef CONFIG_ENV_OFFSET_OOB +unsigned long nand_env_oob_offset; + +int do_nand_env_oob(cmd_tbl_t *cmdtp, nand_info_t *nand, + int argc, char * const argv[]) +{ + int ret; + uint32_t oob_buf[ENV_OFFSET_SIZE/sizeof(uint32_t)]; + + char *cmd = argv[1]; + + if (!strcmp(cmd, "get")) { + ret = get_nand_env_oob(nand, &nand_env_oob_offset); + if (ret) + return 1; + + printf("0x%08lx\n", nand_env_oob_offset); + } else if (!strcmp(cmd, "set")) { + ulong addr; + size_t dummy_size; + struct mtd_oob_ops ops; + + if (argc < 3) + goto usage; + + if (arg_off_size(argc - 2, argv + 2, nand, &addr, + &dummy_size) < 0) { + printf("Offset or partition name expected\n"); + return 1; + } + + if (nand->oobavail < ENV_OFFSET_SIZE) { + printf("Insufficient available OOB bytes:\n" + "%d OOB bytes available but %d required for " + "env.oob support\n", + nand->oobavail, ENV_OFFSET_SIZE); + return 1; + } + + if ((addr & (nand->erasesize - 1)) != 0) { + printf("Environment offset must be block-aligned\n"); + return 1; + } + + ops.datbuf = NULL; + ops.mode = MTD_OOB_AUTO; + ops.ooboffs = 0; + ops.ooblen = ENV_OFFSET_SIZE; + ops.oobbuf = (void *) oob_buf; + + oob_buf[0] = ENV_OOB_MARKER; + oob_buf[1] = addr / nand->erasesize; + + ret = nand->write_oob(nand, ENV_OFFSET_SIZE, &ops); + if (ret) { + printf("Error writing OOB block 0\n"); + return ret; + } + + ret = get_nand_env_oob(nand, &nand_env_oob_offset); + if (ret) { + printf("Error reading env offset in OOB\n"); + return ret; + } + + if (addr != nand_env_oob_offset) { + printf("Verification of env offset in OOB failed: " + "0x%08lx expected but got 0x%08lx\n", + addr, nand_env_oob_offset); + return 1; + } + } else { + goto usage; + } + + return ret; + +usage: + cmd_usage(cmdtp); + return 1; +} + +#endif + static void nand_print_info(int idx) { nand_info_t *nand = &nand_info[idx]; @@ -272,9 +360,21 @@ int do_nand(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) strncmp(cmd, "read", 4) != 0 && strncmp(cmd, "write", 5) != 0 && strcmp(cmd, "scrub") != 0 && strcmp(cmd, "markbad") != 0 && strcmp(cmd, "biterr") != 0 && - strcmp(cmd, "lock") != 0 && strcmp(cmd, "unlock") != 0 ) + strcmp(cmd, "lock") != 0 && strcmp(cmd, "unlock") != 0 +#ifdef CONFIG_ENV_OFFSET_OOB + && strcmp(cmd, "env.oob") != 0 +#endif + ) goto usage; +#ifdef CONFIG_ENV_OFFSET_OOB + /* this command operates only on the first nand device */ + if (strcmp(cmd, "env.oob") == 0) { + return do_nand_env_oob(cmdtp, &nand_info[0], + argc - 1, argv + 1); + } +#endif + /* the following commands operate on the current device */ if (nand_curr_device < 0 || nand_curr_device >= CONFIG_SYS_MAX_NAND_DEVICE || !nand_info[nand_curr_device].name) { @@ -502,6 +602,13 @@ U_BOOT_CMD(nand, CONFIG_SYS_MAXARGS, 1, do_nand, " bring nand to lock state or display locked pages\n" "nand unlock [offset] [size] - unlock section" #endif +#ifdef CONFIG_ENV_OFFSET_OOB + "\n" + "nand env.oob - environment offset in OOB of block 0 of" + " first device.\n" + "nand env.oob set off|partition - set enviromnent offset\n" + "nand env.oob get - get environment offset" +#endif ); static int nand_load_image(cmd_tbl_t *cmdtp, nand_info_t *nand, diff --git a/common/cmd_reginfo.c b/common/cmd_reginfo.c index 94b8d586986..908876ce45d 100644 --- a/common/cmd_reginfo.c +++ b/common/cmd_reginfo.c @@ -33,6 +33,8 @@ extern void ppc4xx_reginfo(void); #include <mpc5xxx.h> #elif defined (CONFIG_MPC86xx) extern void mpc86xx_reginfo(void); +#elif defined(CONFIG_MPC85xx) +extern void mpc85xx_reginfo(void); #endif int do_reginfo (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) @@ -183,6 +185,9 @@ int do_reginfo (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) #elif defined(CONFIG_MPC86xx) mpc86xx_reginfo(); +#elif defined(CONFIG_MPC85xx) + mpc85xx_reginfo(); + #elif defined(CONFIG_BLACKFIN) puts("\nSystem Configuration registers\n"); diff --git a/common/env_nand.c b/common/env_nand.c index 50bc111a3bf..a5e1038315b 100644 --- a/common/env_nand.c +++ b/common/env_nand.c @@ -38,6 +38,7 @@ #include <linux/stddef.h> #include <malloc.h> #include <nand.h> +#include <asm/errno.h> #if defined(CONFIG_CMD_SAVEENV) && defined(CONFIG_CMD_NAND) #define CMD_SAVEENV @@ -284,6 +285,38 @@ int readenv (size_t offset, u_char * buf) return 0; } +#ifdef CONFIG_ENV_OFFSET_OOB +int get_nand_env_oob(nand_info_t *nand, unsigned long *result) +{ + struct mtd_oob_ops ops; + uint32_t oob_buf[ENV_OFFSET_SIZE/sizeof(uint32_t)]; + int ret; + + ops.datbuf = NULL; + ops.mode = MTD_OOB_AUTO; + ops.ooboffs = 0; + ops.ooblen = ENV_OFFSET_SIZE; + ops.oobbuf = (void *) oob_buf; + + ret = nand->read_oob(nand, ENV_OFFSET_SIZE, &ops); + if (ret) { + printf("error reading OOB block 0\n"); + return ret; + } + + if (oob_buf[0] == ENV_OOB_MARKER) { + *result = oob_buf[1] * nand->erasesize; + } else if (oob_buf[0] == ENV_OOB_MARKER_OLD) { + *result = oob_buf[1]; + } else { + printf("No dynamic environment marker in OOB block 0\n"); + return -ENOENT; + } + + return 0; +} +#endif + #ifdef CONFIG_ENV_OFFSET_REDUND void env_relocate_spec (void) { @@ -353,6 +386,17 @@ void env_relocate_spec (void) #if !defined(ENV_IS_EMBEDDED) int ret; +#if defined(CONFIG_ENV_OFFSET_OOB) + ret = get_nand_env_oob(&nand_info[0], &nand_env_oob_offset); + /* If unable to read environment offset from NAND OOB then fall through + * to the normal environment reading code below + */ + if (!ret) + printf("Found Environment offset in OOB..\n"); + else + return use_default(); +#endif + ret = readenv(CONFIG_ENV_OFFSET, (u_char *) env_ptr); if (ret) return use_default(); diff --git a/common/fdt_support.c b/common/fdt_support.c index a8ac617da58..4d87135cb79 100644 --- a/common/fdt_support.c +++ b/common/fdt_support.c @@ -474,135 +474,6 @@ void fdt_fixup_ethernet(void *fdt) } } -#ifdef CONFIG_HAS_FSL_DR_USB -void fdt_fixup_dr_usb(void *blob, bd_t *bd) -{ - char *mode; - char *type; - const char *compat = "fsl-usb2-dr"; - const char *prop_mode = "dr_mode"; - const char *prop_type = "phy_type"; - int node_offset; - int err; - - mode = getenv("usb_dr_mode"); - type = getenv("usb_phy_type"); - if (!mode && !type) - return; - - node_offset = fdt_node_offset_by_compatible(blob, 0, compat); - if (node_offset < 0) { - printf("WARNING: could not find compatible node %s: %s.\n", - compat, fdt_strerror(node_offset)); - return; - } - - if (mode) { - err = fdt_setprop(blob, node_offset, prop_mode, mode, - strlen(mode) + 1); - if (err < 0) - printf("WARNING: could not set %s for %s: %s.\n", - prop_mode, compat, fdt_strerror(err)); - } - - if (type) { - err = fdt_setprop(blob, node_offset, prop_type, type, - strlen(type) + 1); - if (err < 0) - printf("WARNING: could not set %s for %s: %s.\n", - prop_type, compat, fdt_strerror(err)); - } -} -#endif /* CONFIG_HAS_FSL_DR_USB */ - -#if defined(CONFIG_MPC83xx) || defined(CONFIG_MPC85xx) -/* - * update crypto node properties to a specified revision of the SEC - * called with sec_rev == 0 if not on an mpc8xxxE processor - */ -void fdt_fixup_crypto_node(void *blob, int sec_rev) -{ - const struct sec_rev_prop { - u32 sec_rev; - u32 num_channels; - u32 channel_fifo_len; - u32 exec_units_mask; - u32 descriptor_types_mask; - } sec_rev_prop_list [] = { - { 0x0200, 4, 24, 0x07e, 0x01010ebf }, /* SEC 2.0 */ - { 0x0201, 4, 24, 0x0fe, 0x012b0ebf }, /* SEC 2.1 */ - { 0x0202, 1, 24, 0x04c, 0x0122003f }, /* SEC 2.2 */ - { 0x0204, 4, 24, 0x07e, 0x012b0ebf }, /* SEC 2.4 */ - { 0x0300, 4, 24, 0x9fe, 0x03ab0ebf }, /* SEC 3.0 */ - { 0x0301, 4, 24, 0xbfe, 0x03ab0ebf }, /* SEC 3.1 */ - { 0x0303, 4, 24, 0x97c, 0x03a30abf }, /* SEC 3.3 */ - }; - char compat_strlist[ARRAY_SIZE(sec_rev_prop_list) * - sizeof("fsl,secX.Y")]; - int crypto_node, sec_idx, err; - char *p; - u32 val; - - /* locate crypto node based on lowest common compatible */ - crypto_node = fdt_node_offset_by_compatible(blob, -1, "fsl,sec2.0"); - if (crypto_node == -FDT_ERR_NOTFOUND) - return; - - /* delete it if not on an E-processor */ - if (crypto_node > 0 && !sec_rev) { - fdt_del_node(blob, crypto_node); - return; - } - - /* else we got called for possible uprev */ - for (sec_idx = 0; sec_idx < ARRAY_SIZE(sec_rev_prop_list); sec_idx++) - if (sec_rev_prop_list[sec_idx].sec_rev == sec_rev) - break; - - if (sec_idx == ARRAY_SIZE(sec_rev_prop_list)) { - puts("warning: unknown SEC revision number\n"); - return; - } - - val = cpu_to_fdt32(sec_rev_prop_list[sec_idx].num_channels); - err = fdt_setprop(blob, crypto_node, "fsl,num-channels", &val, 4); - if (err < 0) - printf("WARNING: could not set crypto property: %s\n", - fdt_strerror(err)); - - val = cpu_to_fdt32(sec_rev_prop_list[sec_idx].descriptor_types_mask); - err = fdt_setprop(blob, crypto_node, "fsl,descriptor-types-mask", &val, 4); - if (err < 0) - printf("WARNING: could not set crypto property: %s\n", - fdt_strerror(err)); - - val = cpu_to_fdt32(sec_rev_prop_list[sec_idx].exec_units_mask); - err = fdt_setprop(blob, crypto_node, "fsl,exec-units-mask", &val, 4); - if (err < 0) - printf("WARNING: could not set crypto property: %s\n", - fdt_strerror(err)); - - val = cpu_to_fdt32(sec_rev_prop_list[sec_idx].channel_fifo_len); - err = fdt_setprop(blob, crypto_node, "fsl,channel-fifo-len", &val, 4); - if (err < 0) - printf("WARNING: could not set crypto property: %s\n", - fdt_strerror(err)); - - val = 0; - while (sec_idx >= 0) { - p = compat_strlist + val; - val += sprintf(p, "fsl,sec%d.%d", - (sec_rev_prop_list[sec_idx].sec_rev & 0xff00) >> 8, - sec_rev_prop_list[sec_idx].sec_rev & 0x00ff) + 1; - sec_idx--; - } - err = fdt_setprop(blob, crypto_node, "compatible", &compat_strlist, val); - if (err < 0) - printf("WARNING: could not set crypto property: %s\n", - fdt_strerror(err)); -} -#endif /* defined(CONFIG_MPC83xx) || defined(CONFIG_MPC85xx) */ - /* Resize the fdt to its actual size + a bit of padding */ int fdt_resize(void *blob) { diff --git a/common/lcd.c b/common/lcd.c index 93ddedf01e8..d854c21e95a 100644 --- a/common/lcd.c +++ b/common/lcd.c @@ -41,7 +41,7 @@ #include <lcd.h> #include <watchdog.h> -#if defined(CONFIG_PXA250) +#if defined CONFIG_PXA250 || defined CONFIG_PXA27X || defined CONFIG_CPU_MONAHANS #include <asm/byteorder.h> #endif @@ -503,7 +503,7 @@ void bitmap_plot (int x, int y) uchar *bmap; uchar *fb; ushort *fb16; -#if defined(CONFIG_PXA250) +#if defined CONFIG_PXA250 || defined CONFIG_PXA27X || defined CONFIG_CPU_MONAHANS struct pxafb_info *fbi = &panel_info.pxa; #elif defined(CONFIG_MPC823) volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR; @@ -519,7 +519,7 @@ void bitmap_plot (int x, int y) if (NBITS(panel_info.vl_bpix) < 12) { /* Leave room for default color map */ -#if defined(CONFIG_PXA250) +#if defined CONFIG_PXA250 || defined CONFIG_PXA27X || defined CONFIG_CPU_MONAHANS cmap = (ushort *)fbi->palette; #elif defined(CONFIG_MPC823) cmap = (ushort *)&(cp->lcd_cmap[BMP_LOGO_OFFSET*sizeof(ushort)]); @@ -615,7 +615,7 @@ int lcd_display_bitmap(ulong bmp_image, int x, int y) unsigned long pwidth = panel_info.vl_col; unsigned colors, bpix, bmp_bpix; unsigned long compression; -#if defined(CONFIG_PXA250) +#if defined CONFIG_PXA250 || defined CONFIG_PXA27X || defined CONFIG_CPU_MONAHANS struct pxafb_info *fbi = &panel_info.pxa; #elif defined(CONFIG_MPC823) volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR; @@ -656,7 +656,7 @@ int lcd_display_bitmap(ulong bmp_image, int x, int y) #if !defined(CONFIG_MCC200) /* MCC200 LCD doesn't need CMAP, supports 1bpp b&w only */ if (bmp_bpix == 8) { -#if defined(CONFIG_PXA250) +#if defined CONFIG_PXA250 || defined CONFIG_PXA27X || defined CONFIG_CPU_MONAHANS cmap = (ushort *)fbi->palette; #elif defined(CONFIG_MPC823) cmap = (ushort *)&(cp->lcd_cmap[255*sizeof(ushort)]); @@ -745,7 +745,7 @@ int lcd_display_bitmap(ulong bmp_image, int x, int y) WATCHDOG_RESET(); for (j = 0; j < width; j++) { if (bpix != 16) { -#if defined(CONFIG_PXA250) || defined(CONFIG_ATMEL_LCD) +#if defined CONFIG_PXA250 || defined CONFIG_PXA27X || defined CONFIG_CPU_MONAHANS || defined(CONFIG_ATMEL_LCD) *(fb++) = *(bmap++); #elif defined(CONFIG_MPC823) || defined(CONFIG_MCC200) *(fb++) = 255 - *(bmap++); |