diff options
Diffstat (limited to 'common')
| -rw-r--r-- | common/Kconfig | 84 | ||||
| -rw-r--r-- | common/Makefile | 5 | ||||
| -rw-r--r-- | common/bloblist.c | 239 | ||||
| -rw-r--r-- | common/board_f.c | 49 | ||||
| -rw-r--r-- | common/console.c | 7 | ||||
| -rw-r--r-- | common/init/Makefile | 1 | ||||
| -rw-r--r-- | common/init/handoff.c | 47 | ||||
| -rw-r--r-- | common/spl/Kconfig | 95 | ||||
| -rw-r--r-- | common/spl/spl.c | 135 |
9 files changed, 626 insertions, 36 deletions
diff --git a/common/Kconfig b/common/Kconfig index ba460d9150d..57bd16d9623 100644 --- a/common/Kconfig +++ b/common/Kconfig @@ -299,6 +299,10 @@ config SPL_LOGLEVEL int default LOGLEVEL +config TPL_LOGLEVEL + int + default LOGLEVEL + config SILENT_CONSOLE bool "Support a silent console" help @@ -505,6 +509,24 @@ config SPL_LOG_MAX_LEVEL 6 - detail 7 - debug +config TPL_LOG_MAX_LEVEL + int "Maximum log level to record in TPL" + depends on TPL_LOG + default 3 + help + This selects the maximum log level that will be recorded. Any value + higher than this will be ignored. If possible log statements below + this level will be discarded at build time. Levels: + + 0 - panic + 1 - critical + 2 - error + 3 - warning + 4 - note + 5 - info + 6 - detail + 7 - debug + config LOG_CONSOLE bool "Allow log output to the console" depends on LOG @@ -515,9 +537,19 @@ config LOG_CONSOLE log message is shown - other details like level, category, file and line number are omitted. -config LOG_SPL_CONSOLE +config SPL_LOG_CONSOLE + bool "Allow log output to the console in SPL" + depends on SPL_LOG + default y + help + Enables a log driver which writes log records to the console. + Generally the console is the serial port or LCD display. Only the + log message is shown - other details like level, category, file and + line number are omitted. + +config TPL_LOG_CONSOLE bool "Allow log output to the console in SPL" - depends on LOG_SPL + depends on TPL_LOG default y help Enables a log driver which writes log records to the console. @@ -718,4 +750,52 @@ config UPDATE_TFTP_MSEC_MAX endmenu +menu "Blob list" + +config BLOBLIST + bool "Support for a bloblist" + help + This enables support for a bloblist in U-Boot, which can be passed + from TPL to SPL to U-Boot proper (and potentially to Linux). The + blob list supports multiple binary blobs of data, each with a tag, + so that different U-Boot components can store data which can survive + through to the next stage of the boot. + +config SPL_BLOBLIST + bool "Support for a bloblist in SPL" + depends on BLOBLIST + default y if SPL + help + This enables a bloblist in SPL. If this is the first part of U-Boot + to run, then the bloblist is set up in SPL and passed to U-Boot + proper. If TPL also has a bloblist, then SPL uses the one from there. + +config TPL_BLOBLIST + bool "Support for a bloblist in TPL" + depends on BLOBLIST + default y if TPL + help + This enables a bloblist in TPL. The bloblist is set up in TPL and + passed to SPL and U-Boot proper. + +config BLOBLIST_SIZE + hex "Size of bloblist" + depends on BLOBLIST + default 0x400 + help + Sets the size of the bloblist in bytes. This must include all + overhead (alignment, bloblist header, record header). The bloblist + is set up in the first part of U-Boot to run (TPL, SPL or U-Boot + proper), and this sane bloblist is used for subsequent stages. + +config BLOBLIST_ADDR + hex "Address of bloblist" + depends on BLOBLIST + default 0xe000 if SANDBOX + help + Sets the address of the bloblist, set up by the first part of U-Boot + which runs. Subsequent U-Boot stages typically use the same address. + +endmenu + source "common/spl/Kconfig" diff --git a/common/Makefile b/common/Makefile index bbe2a6e2390..88079d1072c 100644 --- a/common/Makefile +++ b/common/Makefile @@ -61,6 +61,7 @@ obj-$(CONFIG_CMDLINE) += cli_readline.o cli_simple.o endif # !CONFIG_SPL_BUILD obj-$(CONFIG_$(SPL_TPL_)BOOTSTAGE) += bootstage.o +obj-$(CONFIG_$(SPL_TPL_)BLOBLIST) += bloblist.o ifdef CONFIG_SPL_BUILD ifdef CONFIG_SPL_DFU_SUPPORT @@ -122,8 +123,8 @@ obj-y += cli.o obj-$(CONFIG_FSL_DDR_INTERACTIVE) += cli_simple.o cli_readline.o obj-$(CONFIG_DFU_OVER_USB) += dfu.o obj-y += command.o -obj-$(CONFIG_$(SPL_)LOG) += log.o -obj-$(CONFIG_$(SPL_)LOG_CONSOLE) += log_console.o +obj-$(CONFIG_$(SPL_TPL_)LOG) += log.o +obj-$(CONFIG_$(SPL_TPL_)LOG_CONSOLE) += log_console.o obj-y += s_record.o obj-$(CONFIG_CMD_LOADB) += xyzModem.o obj-$(CONFIG_$(SPL_TPL_)YMODEM_SUPPORT) += xyzModem.o diff --git a/common/bloblist.c b/common/bloblist.c new file mode 100644 index 00000000000..b4cf169b05a --- /dev/null +++ b/common/bloblist.c @@ -0,0 +1,239 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2018 Google, Inc + * Written by Simon Glass <sjg@chromium.org> + */ + +#include <common.h> +#include <bloblist.h> +#include <log.h> +#include <mapmem.h> +#include <spl.h> + +DECLARE_GLOBAL_DATA_PTR; + +struct bloblist_rec *bloblist_first_blob(struct bloblist_hdr *hdr) +{ + if (hdr->alloced <= hdr->hdr_size) + return NULL; + return (struct bloblist_rec *)((void *)hdr + hdr->hdr_size); +} + +struct bloblist_rec *bloblist_next_blob(struct bloblist_hdr *hdr, + struct bloblist_rec *rec) +{ + ulong offset; + + offset = (void *)rec - (void *)hdr; + offset += rec->hdr_size + ALIGN(rec->size, BLOBLIST_ALIGN); + if (offset >= hdr->alloced) + return NULL; + return (struct bloblist_rec *)((void *)hdr + offset); +} + +#define foreach_rec(_rec, _hdr) \ + for (_rec = bloblist_first_blob(_hdr); \ + _rec; \ + _rec = bloblist_next_blob(_hdr, _rec)) + +static struct bloblist_rec *bloblist_findrec(uint tag) +{ + struct bloblist_hdr *hdr = gd->bloblist; + struct bloblist_rec *rec; + + if (!hdr) + return NULL; + + foreach_rec(rec, hdr) { + if (rec->tag == tag) + return rec; + } + + return NULL; +} + +static int bloblist_addrec(uint tag, int size, struct bloblist_rec **recp) +{ + struct bloblist_hdr *hdr = gd->bloblist; + struct bloblist_rec *rec; + int new_alloced; + + new_alloced = hdr->alloced + sizeof(*rec) + + ALIGN(size, BLOBLIST_ALIGN); + if (new_alloced >= hdr->size) { + log(LOGC_BLOBLIST, LOGL_ERR, + "Failed to allocate %x bytes size=%x, need size>=%x\n", + size, hdr->size, new_alloced); + return log_msg_ret("bloblist add", -ENOSPC); + } + rec = (void *)hdr + hdr->alloced; + hdr->alloced = new_alloced; + + rec->tag = tag; + rec->hdr_size = sizeof(*rec); + rec->size = size; + rec->spare = 0; + *recp = rec; + + return 0; +} + +static int bloblist_ensurerec(uint tag, struct bloblist_rec **recp, int size) +{ + struct bloblist_rec *rec; + + rec = bloblist_findrec(tag); + if (rec) { + if (size && size != rec->size) + return -ESPIPE; + } else { + int ret; + + ret = bloblist_addrec(tag, size, &rec); + if (ret) + return ret; + } + *recp = rec; + + return 0; +} + +void *bloblist_find(uint tag, int size) +{ + struct bloblist_rec *rec; + + rec = bloblist_findrec(tag); + if (!rec) + return NULL; + if (size && size != rec->size) + return NULL; + + return (void *)rec + rec->hdr_size; +} + +void *bloblist_add(uint tag, int size) +{ + struct bloblist_rec *rec; + + if (bloblist_addrec(tag, size, &rec)) + return NULL; + + return rec + 1; +} + +int bloblist_ensure_size(uint tag, int size, void **blobp) +{ + struct bloblist_rec *rec; + int ret; + + ret = bloblist_ensurerec(tag, &rec, size); + if (ret) + return ret; + *blobp = (void *)rec + rec->hdr_size; + + return 0; +} + +void *bloblist_ensure(uint tag, int size) +{ + struct bloblist_rec *rec; + + if (bloblist_ensurerec(tag, &rec, size)) + return NULL; + + return (void *)rec + rec->hdr_size; +} + +static u32 bloblist_calc_chksum(struct bloblist_hdr *hdr) +{ + struct bloblist_rec *rec; + u32 chksum; + + chksum = crc32(0, (unsigned char *)hdr, + offsetof(struct bloblist_hdr, chksum)); + foreach_rec(rec, hdr) { + chksum = crc32(chksum, (void *)rec, rec->hdr_size); + chksum = crc32(chksum, (void *)rec + rec->hdr_size, rec->size); + } + + return chksum; +} + +int bloblist_new(ulong addr, uint size, uint flags) +{ + struct bloblist_hdr *hdr; + + if (size < sizeof(*hdr)) + return log_ret(-ENOSPC); + if (addr & (BLOBLIST_ALIGN - 1)) + return log_ret(-EFAULT); + hdr = map_sysmem(addr, size); + memset(hdr, '\0', sizeof(*hdr)); + hdr->version = BLOBLIST_VERSION; + hdr->hdr_size = sizeof(*hdr); + hdr->flags = flags; + hdr->magic = BLOBLIST_MAGIC; + hdr->size = size; + hdr->alloced = hdr->hdr_size; + hdr->chksum = 0; + gd->bloblist = hdr; + + return 0; +} + +int bloblist_check(ulong addr, uint size) +{ + struct bloblist_hdr *hdr; + u32 chksum; + + hdr = map_sysmem(addr, sizeof(*hdr)); + if (hdr->magic != BLOBLIST_MAGIC) + return log_msg_ret("Bad magic", -ENOENT); + if (hdr->version != BLOBLIST_VERSION) + return log_msg_ret("Bad version", -EPROTONOSUPPORT); + if (size && hdr->size != size) + return log_msg_ret("Bad size", -EFBIG); + chksum = bloblist_calc_chksum(hdr); + if (hdr->chksum != chksum) { + log(LOGC_BLOBLIST, LOGL_ERR, "Checksum %x != %x\n", hdr->chksum, + chksum); + return log_msg_ret("Bad checksum", -EIO); + } + gd->bloblist = hdr; + + return 0; +} + +int bloblist_finish(void) +{ + struct bloblist_hdr *hdr = gd->bloblist; + + hdr->chksum = bloblist_calc_chksum(hdr); + + return 0; +} + +int bloblist_init(void) +{ + bool expected; + int ret = -ENOENT; + + /** + * Wed expect to find an existing bloblist in the first phase of U-Boot + * that runs + */ + expected = !u_boot_first_phase(); + if (expected) + ret = bloblist_check(CONFIG_BLOBLIST_ADDR, + CONFIG_BLOBLIST_SIZE); + if (ret) { + log(LOGC_BLOBLIST, expected ? LOGL_WARNING : LOGL_DEBUG, + "Existing bloblist not found: creating new bloblist\n"); + ret = bloblist_new(CONFIG_BLOBLIST_ADDR, CONFIG_BLOBLIST_SIZE, + 0); + } else { + log(LOGC_BLOBLIST, LOGL_DEBUG, "Found existing bloblist\n"); + } + + return ret; +} diff --git a/common/board_f.c b/common/board_f.c index f1a1432d869..835b7247c58 100644 --- a/common/board_f.c +++ b/common/board_f.c @@ -10,6 +10,7 @@ */ #include <common.h> +#include <bloblist.h> #include <console.h> #include <cpu.h> #include <dm.h> @@ -24,6 +25,9 @@ #include <post.h> #include <relocate.h> #include <spi.h> +#ifdef CONFIG_SPL +#include <spl.h> +#endif #include <status_led.h> #include <sysreset.h> #include <timer.h> @@ -285,6 +289,17 @@ static int setup_mon_len(void) return 0; } +static int setup_spl_handoff(void) +{ +#if CONFIG_IS_ENABLED(HANDOFF) + gd->spl_handoff = bloblist_find(BLOBLISTT_SPL_HANDOFF, + sizeof(struct spl_handoff)); + debug("Found SPL hand-off info %p\n", gd->spl_handoff); +#endif + + return 0; +} + __weak int arch_cpu_init(void) { return 0; @@ -560,6 +575,16 @@ static int reserve_stacks(void) return arch_reserve_stacks(); } +static int reserve_bloblist(void) +{ +#ifdef CONFIG_BLOBLIST + gd->start_addr_sp -= CONFIG_BLOBLIST_SIZE; + gd->new_bloblist = map_sysmem(gd->start_addr_sp, CONFIG_BLOBLIST_SIZE); +#endif + + return 0; +} + static int display_new_sp(void) { debug("New Stack Pointer is: %08lx\n", gd->start_addr_sp); @@ -666,6 +691,24 @@ static int reloc_bootstage(void) return 0; } +static int reloc_bloblist(void) +{ +#ifdef CONFIG_BLOBLIST + if (gd->flags & GD_FLG_SKIP_RELOC) + return 0; + if (gd->new_bloblist) { + int size = CONFIG_BLOBLIST_SIZE; + + debug("Copying bloblist from %p to %p, size %x\n", + gd->bloblist, gd->new_bloblist, size); + memcpy(gd->new_bloblist, gd->bloblist, size); + gd->bloblist = gd->new_bloblist; + } +#endif + + return 0; +} + static int setup_reloc(void) { if (gd->flags & GD_FLG_SKIP_RELOC) { @@ -813,6 +856,10 @@ static const init_fnc_t init_sequence_f[] = { initf_malloc, log_init, initf_bootstage, /* uses its own timer, so does not need DM */ +#ifdef CONFIG_BLOBLIST + bloblist_init, +#endif + setup_spl_handoff, initf_console_record, #if defined(CONFIG_HAVE_FSP) arch_fsp_init, @@ -913,6 +960,7 @@ static const init_fnc_t init_sequence_f[] = { reserve_global_data, reserve_fdt, reserve_bootstage, + reserve_bloblist, reserve_arch, reserve_stacks, dram_init_banksize, @@ -932,6 +980,7 @@ static const init_fnc_t init_sequence_f[] = { INIT_FUNC_WATCHDOG_RESET reloc_fdt, reloc_bootstage, + reloc_bloblist, setup_reloc, #if defined(CONFIG_X86) || defined(CONFIG_ARC) copy_uboot_to_ram, diff --git a/common/console.c b/common/console.c index 9a94f321922..0b0dd76256c 100644 --- a/common/console.c +++ b/common/console.c @@ -535,6 +535,13 @@ void putc(const char c) void puts(const char *s) { +#ifdef CONFIG_SANDBOX + /* sandbox can send characters to stdout before it has a console */ + if (!gd || !(gd->flags & GD_FLG_SERIAL_READY)) { + os_puts(s); + return; + } +#endif #ifdef CONFIG_DEBUG_UART if (!gd || !(gd->flags & GD_FLG_SERIAL_READY)) { while (*s) { diff --git a/common/init/Makefile b/common/init/Makefile index 4902635f535..853b56d1e57 100644 --- a/common/init/Makefile +++ b/common/init/Makefile @@ -5,3 +5,4 @@ # obj-y += board_init.o +obj-$(CONFIG_$(SPL_TPL_)HANDOFF) += handoff.o diff --git a/common/init/handoff.c b/common/init/handoff.c new file mode 100644 index 00000000000..e00b43e6a7b --- /dev/null +++ b/common/init/handoff.c @@ -0,0 +1,47 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Passing basic information from SPL to U-Boot proper + * + * Copyright 2018 Google, Inc + */ + +#include <common.h> +#include <handoff.h> + +DECLARE_GLOBAL_DATA_PTR; + +void handoff_save_dram(struct spl_handoff *ho) +{ + ho->ram_size = gd->ram_size; +#ifdef CONFIG_NR_DRAM_BANKS + { + struct bd_info *bd = gd->bd; + int i; + + for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) { + ho->ram_bank[i].start = bd->bi_dram[i].start; + ho->ram_bank[i].size = bd->bi_dram[i].size; + } + } +#endif +} + +void handoff_load_dram_size(struct spl_handoff *ho) +{ + gd->ram_size = ho->ram_size; +} + +void handoff_load_dram_banks(struct spl_handoff *ho) +{ +#ifdef CONFIG_NR_DRAM_BANKS + { + struct bd_info *bd = gd->bd; + int i; + + for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) { + bd->bi_dram[i].start = ho->ram_bank[i].start; + bd->bi_dram[i].size = ho->ram_bank[i].size; + } + } +#endif +} diff --git a/common/spl/Kconfig b/common/spl/Kconfig index d0564621d4d..0ddbffc7d1c 100644 --- a/common/spl/Kconfig +++ b/common/spl/Kconfig @@ -25,8 +25,28 @@ config SPL_FRAMEWORK supports MMC, NAND and YMODEM and other methods loading of U-Boot and the Linux Kernel. If unsure, say Y. +config HANDOFF + bool "Pass hand-off information from SPL to U-Boot proper" + depends on BLOBLIST + help + It is useful to be able to pass information from SPL to U-Boot + proper to preserve state that is known in SPL and is needed in U-Boot. + Enable this to locate the handoff information in U-Boot proper, early + in boot. It is available in gd->handoff. The state state is set up + in SPL (or TPL if that is being used). + if SPL +config SPL_HANDOFF + bool "Pass hand-off information from SPL to U-Boot proper" + depends on HANDOFF + default y + help + This option enables SPL to write handoff information. This can be + used to pass information like the size of SDRAM from SPL to U-Boot + proper. Also SPL can receive information from TPL in the same place + if that is enabled. + config SPL_LDSCRIPT string "Linker script for the SPL stage" default "arch/$(ARCH)/cpu/u-boot-spl.lds" @@ -135,12 +155,21 @@ config SPL_SEPARATE_BSS location is used. Normally we put the device tree at the end of BSS but with this option enabled, it goes at _image_binary_end. -config SPL_DISABLE_BANNER_PRINT - bool "Disable output of the SPL banner 'U-Boot SPL ...'" +config SPL_BANNER_PRINT + bool "Enable output of the SPL banner 'U-Boot SPL ...'" + default y + help + If this option is enabled, SPL will print the banner with version + info. Disabling this option could be useful to reduce TPL boot time + (e.g. approx. 6 ms faster, when output on i.MX6 with 115200 baud). + +config TPL_BANNER_PRINT + bool "Enable output of the TPL banner 'U-Boot TPL ...'" + default y help If this option is enabled, SPL will not print the banner with version - info. Selecting this option could be useful to reduce SPL boot time - (e.g. approx. 6 ms slower, when output on i.MX6 with 115200 baud). + info. Disabling this option could be useful to reduce SPL boot time + (e.g. approx. 6 ms faster, when output on i.MX6 with 115200 baud). config SPL_DISPLAY_PRINT bool "Display a board-specific message in SPL" @@ -295,6 +324,16 @@ config SPL_HASH_SUPPORT this option to build system-specific drivers for hash acceleration as part of an SPL build. +config TPL_HASH_SUPPORT + bool "Support hashing drivers in TPL" + select SHA1 + select SHA256 + help + Enable hashing drivers in SPL. These drivers can be used to + accelerate secure boot processing in secure applications. Enable + this option to build system-specific drivers for hash acceleration + as part of an SPL build. + config SPL_DMA_SUPPORT bool "Support DMA drivers" help @@ -376,7 +415,7 @@ config SPL_FPGA_SUPPORT within SPL. config SPL_GPIO_SUPPORT - bool "Support GPIO" + bool "Support GPIO in SPL" help Enable support for GPIOs (General-purpose Input/Output) in SPL. GPIOs allow U-Boot to read the state of an input line (high or @@ -848,6 +887,16 @@ config TPL if TPL +config TPL_HANDOFF + bool "Pass hand-off information from TPL to SPL and U-Boot proper" + depends on HANDOFF + default y + help + This option enables TPL to write handoff information. This can be + used to pass information like the size of SDRAM from TPL to U-Boot + proper. The information is also available to SPL if it is useful + there. + config TPL_BOARD_INIT bool "Call board-specific initialization in TPL" help @@ -928,6 +977,17 @@ config TPL_ENV_SUPPORT help Enable environment support in TPL. See SPL_ENV_SUPPORT for details. +config TPL_GPIO_SUPPORT + bool "Support GPIO in TPL" + help + Enable support for GPIOs (General-purpose Input/Output) in TPL. + GPIOs allow U-Boot to read the state of an input line (high or + low) and set the state of an output line. This can be used to + drive LEDs, control power to various system parts and read user + input. GPIOs can be useful in TPL to enable a 'sign-of-life' LED, + for example. Enable this option to build the drivers in + drivers/gpio as part of an TPL build. + config TPL_I2C_SUPPORT bool "Support I2C" help @@ -963,6 +1023,22 @@ config TPL_NAND_SUPPORT help Enable support for NAND in TPL. See SPL_NAND_SUPPORT for details. +config TPL_PCI_SUPPORT + bool "Support PCI drivers" + help + Enable support for PCI in TPL. For platforms that need PCI to boot, + or must perform some init using PCI in SPL, this provides the + necessary driver support. This enables the drivers in drivers/pci + as part of a TPL build. + +config TPL_PCH_SUPPORT + bool "Support PCH drivers" + help + Enable support for PCH (Platform Controller Hub) devices in TPL. + These are used to set up GPIOs and the SPI peripheral early in + boot. This enables the drivers in drivers/pch as part of a TPL + build. + config TPL_RAM_SUPPORT bool "Support booting from RAM" help @@ -977,6 +1053,15 @@ config TPL_RAM_DEVICE be already in memory when TPL takes over, e.g. loaded by the boot ROM. +config TPL_RTC_SUPPORT + bool "Support RTC drivers" + help + Enable RTC (Real-time Clock) support in TPL. This includes support + for reading and setting the time. Some RTC devices also have some + non-volatile (battery-backed) memory which is accessible if + needed. This enables the drivers in drivers/rtc as part of an TPL + build. + config TPL_SERIAL_SUPPORT bool "Support serial" select TPL_PRINTF diff --git a/common/spl/spl.c b/common/spl/spl.c index 12f9359c0ac..35120b6efd1 100644 --- a/common/spl/spl.c +++ b/common/spl/spl.c @@ -7,8 +7,10 @@ */ #include <common.h> +#include <bloblist.h> #include <binman_sym.h> #include <dm.h> +#include <handoff.h> #include <spl.h> #include <asm/u-boot.h> #include <nand.h> @@ -44,6 +46,14 @@ static bd_t bdata __attribute__ ((section(".data"))); */ __weak void show_boot_progress(int val) {} +#if defined(CONFIG_SPL_OS_BOOT) || CONFIG_IS_ENABLED(HANDOFF) +/* weak, default platform-specific function to initialize dram banks */ +__weak int dram_init_banksize(void) +{ + return 0; +} +#endif + /* * Default function to determine if u-boot or the OS should * be started. This implementation always returns 1. @@ -57,19 +67,12 @@ __weak void show_boot_progress(int val) {} #ifdef CONFIG_SPL_OS_BOOT __weak int spl_start_uboot(void) { - puts("SPL: Please implement spl_start_uboot() for your board\n"); - puts("SPL: Direct Linux boot not active!\n"); + puts(SPL_TPL_PROMPT + "Please implement spl_start_uboot() for your board\n"); + puts(SPL_TPL_PROMPT "Direct Linux boot not active!\n"); return 1; } -/* weak default platform specific function to initialize - * dram banks - */ -__weak int dram_init_banksize(void) -{ - return 0; -} - /* * Weak default function for arch specific zImage check. Return zero * and fill start and end address if image is recognized. @@ -100,13 +103,13 @@ void spl_fixup_fdt(void) /* fixup the memory dt node */ err = fdt_shrink_to_minimum(fdt_blob, 0); if (err == 0) { - printf("spl: fdt_shrink_to_minimum err - %d\n", err); + printf(SPL_TPL_PROMPT "fdt_shrink_to_minimum err - %d\n", err); return; } err = arch_fixup_fdt(fdt_blob); if (err) { - printf("spl: arch_fixup_fdt err - %d\n", err); + printf(SPL_TPL_PROMPT "arch_fixup_fdt err - %d\n", err); return; } #endif @@ -185,7 +188,7 @@ static int spl_load_fit_image(struct spl_image_info *spl_image, spl_image->os = IH_OS_U_BOOT; spl_image->name = "U-Boot"; - debug("spl: payload image: %32s load addr: 0x%lx size: %d\n", + debug(SPL_TPL_PROMPT "payload image: %32s load addr: 0x%lx size: %d\n", spl_image->name, spl_image->load_addr, spl_image->size); #ifdef CONFIG_SPL_FIT_SIGNATURE @@ -255,7 +258,8 @@ int spl_parse_image_header(struct spl_image_info *spl_image, } spl_image->os = image_get_os(header); spl_image->name = image_get_name(header); - debug("spl: payload image: %32s load addr: 0x%lx size: %d\n", + debug(SPL_TPL_PROMPT + "payload image: %32s load addr: 0x%lx size: %d\n", spl_image->name, spl_image->load_addr, spl_image->size); #else /* LEGACY image not supported */ @@ -284,7 +288,8 @@ int spl_parse_image_header(struct spl_image_info *spl_image, spl_image->load_addr = CONFIG_SYS_LOAD_ADDR; spl_image->entry_point = CONFIG_SYS_LOAD_ADDR; spl_image->size = end - start; - debug("spl: payload zImage, load addr: 0x%lx size: %d\n", + debug(SPL_TPL_PROMPT + "payload zImage, load addr: 0x%lx size: %d\n", spl_image->load_addr, spl_image->size); return 0; } @@ -316,6 +321,44 @@ __weak void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image) image_entry(); } +#if CONFIG_IS_ENABLED(HANDOFF) +/** + * Set up the SPL hand-off information + * + * This is initially empty (zero) but can be written by + */ +static int setup_spl_handoff(void) +{ + struct spl_handoff *ho; + + ho = bloblist_ensure(BLOBLISTT_SPL_HANDOFF, sizeof(struct spl_handoff)); + if (!ho) + return -ENOENT; + + return 0; +} + +static int write_spl_handoff(void) +{ + struct spl_handoff *ho; + + ho = bloblist_find(BLOBLISTT_SPL_HANDOFF, sizeof(struct spl_handoff)); + if (!ho) + return -ENOENT; + handoff_save_dram(ho); +#ifdef CONFIG_SANDBOX + ho->arch.magic = TEST_HANDOFF_MAGIC; +#endif + debug(SPL_TPL_PROMPT "Wrote SPL handoff\n"); + + return 0; +} +#else +static inline int setup_spl_handoff(void) { return 0; } +static inline int write_spl_handoff(void) { return 0; } + +#endif /* HANDOFF */ + static int spl_common_init(bool setup_malloc) { int ret; @@ -336,6 +379,30 @@ static int spl_common_init(bool setup_malloc) return ret; } bootstage_mark_name(BOOTSTAGE_ID_START_SPL, "spl"); +#if CONFIG_IS_ENABLED(LOG) + ret = log_init(); + if (ret) { + debug("%s: Failed to set up logging\n", __func__); + return ret; + } +#endif + if (CONFIG_IS_ENABLED(BLOBLIST)) { + ret = bloblist_init(); + if (ret) { + debug("%s: Failed to set up bloblist: ret=%d\n", + __func__, ret); + return ret; + } + } + if (CONFIG_IS_ENABLED(HANDOFF)) { + int ret; + + ret = setup_spl_handoff(); + if (ret) { + puts(SPL_TPL_PROMPT "Cannot set up SPL handoff\n"); + hang(); + } + } if (CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA)) { ret = fdtdec_setup(); if (ret) { @@ -359,6 +426,10 @@ static int spl_common_init(bool setup_malloc) void spl_set_bd(void) { + /* + * NOTE: On some platforms (e.g. x86) bdata may be in flash and not + * writeable. + */ if (!gd->bd) gd->bd = &bdata; } @@ -453,7 +524,7 @@ static int boot_from_devices(struct spl_image_info *spl_image, if (loader) printf("Trying to boot from %s\n", loader->name); else - puts("SPL: Unsupported Boot Device!\n"); + puts(SPL_TPL_PROMPT "Unsupported Boot Device!\n"); #endif if (loader && !spl_load_image(spl_image, loader)) { spl_image->boot_device = spl_boot_list[i]; @@ -474,15 +545,12 @@ void board_init_r(gd_t *dummy1, ulong dummy2) BOOT_DEVICE_NONE, }; struct spl_image_info spl_image; + int ret; - debug(">>spl:board_init_r()\n"); + debug(">>" SPL_TPL_PROMPT "board_init_r()\n"); spl_set_bd(); -#ifdef CONFIG_SPL_OS_BOOT - dram_init_banksize(); -#endif - #if defined(CONFIG_SYS_SPL_MALLOC_START) mem_malloc_init(CONFIG_SYS_SPL_MALLOC_START, CONFIG_SYS_SPL_MALLOC_SIZE); @@ -504,6 +572,9 @@ void board_init_r(gd_t *dummy1, ulong dummy2) spl_board_init(); #endif + if (IS_ENABLED(CONFIG_SPL_OS_BOOT) || CONFIG_IS_ENABLED(HANDOFF)) + dram_init_banksize(); + bootcount_inc(); memset(&spl_image, '\0', sizeof(spl_image)); @@ -515,11 +586,23 @@ void board_init_r(gd_t *dummy1, ulong dummy2) if (boot_from_devices(&spl_image, spl_boot_list, ARRAY_SIZE(spl_boot_list))) { - puts("SPL: failed to boot from all boot devices\n"); + puts(SPL_TPL_PROMPT "failed to boot from all boot devices\n"); hang(); } spl_perform_fixups(&spl_image); + if (CONFIG_IS_ENABLED(HANDOFF)) { + ret = write_spl_handoff(); + if (ret) + printf(SPL_TPL_PROMPT + "SPL hand-off write failed (err=%d)\n", ret); + } + if (CONFIG_IS_ENABLED(BLOBLIST)) { + ret = bloblist_finish(); + if (ret) + printf("Warning: Failed to finish bloblist (ret=%d)\n", + ret); + } #ifdef CONFIG_CPU_V7M spl_image.entry_point |= 0x1; @@ -556,8 +639,6 @@ void board_init_r(gd_t *dummy1, ulong dummy2) gd->malloc_ptr / 1024); #endif #ifdef CONFIG_BOOTSTAGE_STASH - int ret; - bootstage_mark_name(BOOTSTAGE_ID_END_SPL, "end_spl"); ret = bootstage_stash((void *)CONFIG_BOOTSTAGE_STASH_ADDR, CONFIG_BOOTSTAGE_STASH_SIZE); @@ -583,9 +664,9 @@ void preloader_console_init(void) gd->have_console = 1; -#ifndef CONFIG_SPL_DISABLE_BANNER_PRINT - puts("\nU-Boot SPL " PLAIN_VERSION " (" U_BOOT_DATE " - " \ - U_BOOT_TIME " " U_BOOT_TZ ")\n"); +#if CONFIG_IS_ENABLED(BANNER_PRINT) + puts("\nU-Boot " SPL_TPL_NAME " " PLAIN_VERSION " (" U_BOOT_DATE " - " + U_BOOT_TIME " " U_BOOT_TZ ")\n"); #endif #ifdef CONFIG_SPL_DISPLAY_PRINT spl_display_print(); |