1 files changed, 48 insertions, 2 deletions
diff --git a/cpu/mpc83xx/cpu_init.c b/cpu/mpc83xx/cpu_init.c
index 3ac91619c4b..722497966a1 100644
--- a/cpu/mpc83xx/cpu_init.c
+++ b/cpu/mpc83xx/cpu_init.c
@@ -83,20 +83,30 @@ void cpu_init_f (volatile immap_t * im)
 	im->sysconf.spcr = (im->sysconf.spcr & ~SPCR_TSEC2EP) | (CFG_SPCR_TSEC2EP << SPCR_TSEC2EP_SHIFT);
 #endif
 
-#ifdef CONFIG_MPC834X
 #ifdef CFG_SCCR_TSEC1CM
 	/* TSEC1 clock mode */
 	im->clk.sccr = (im->clk.sccr & ~SCCR_TSEC1CM) | (CFG_SCCR_TSEC1CM << SCCR_TSEC1CM_SHIFT);
 #endif
+
 #ifdef CFG_SCCR_TSEC2CM
 	/* TSEC2 & I2C1 clock mode */
 	im->clk.sccr = (im->clk.sccr & ~SCCR_TSEC2CM) | (CFG_SCCR_TSEC2CM << SCCR_TSEC2CM_SHIFT);
 #endif
+
+#ifdef CFG_SCCR_TSEC1ON
+	/* TSEC1 clock switch */
+	im->clk.sccr = (im->clk.sccr & ~SCCR_TSEC1ON) | (CFG_SCCR_TSEC1ON << SCCR_TSEC1ON_SHIFT);
+#endif
+
+#ifdef CFG_SCCR_TSEC2ON
+	/* TSEC2 clock switch */
+	im->clk.sccr = (im->clk.sccr & ~SCCR_TSEC2ON) | (CFG_SCCR_TSEC2ON << SCCR_TSEC2ON_SHIFT);
+#endif
+
 #ifdef CFG_SCCR_USBMPHCM
 	/* USB MPH clock mode */
 	im->clk.sccr = (im->clk.sccr & ~SCCR_USBMPHCM) | (CFG_SCCR_USBMPHCM << SCCR_USBMPHCM_SHIFT);
 #endif
-#endif /* CONFIG_MPC834X */
 
 #ifdef CFG_SCCR_PCICM
 	/* PCI & DMA clock mode */
@@ -247,3 +257,39 @@ int cpu_init_r (void)
 #endif
 	return 0;
 }
+
+/*
+ * Figure out the cause of the reset
+ */
+int prt_83xx_rsr(void)
+{
+	static struct {
+		ulong mask;
+		char *desc;
+	} bits[] = {
+		{
+		RSR_SWSR, "Software Soft"}, {
+		RSR_SWHR, "Software Hard"}, {
+		RSR_JSRS, "JTAG Soft"}, {
+		RSR_CSHR, "Check Stop"}, {
+		RSR_SWRS, "Software Watchdog"}, {
+		RSR_BMRS, "Bus Monitor"}, {
+		RSR_SRS,  "External/Internal Soft"}, {
+		RSR_HRS,  "External/Internal Hard"}
+	};
+	static int n = sizeof bits / sizeof bits[0];
+	ulong rsr = gd->reset_status;
+	int i;
+	char *sep;
+
+	puts("Reset Status:");
+
+	sep = " ";
+	for (i = 0; i < n; i++)
+		if (rsr & bits[i].mask) {
+			printf("%s%s", sep, bits[i].desc);
+			sep = ", ";
+		}
+	puts("\n\n");
+	return 0;
+}