diff options
Diffstat (limited to 'cpu/nios2/epcs.c')
| -rw-r--r-- | cpu/nios2/epcs.c | 38 |
1 files changed, 28 insertions, 10 deletions
diff --git a/cpu/nios2/epcs.c b/cpu/nios2/epcs.c index a8851e99a22..414c38c2b1d 100644 --- a/cpu/nios2/epcs.c +++ b/cpu/nios2/epcs.c @@ -25,7 +25,7 @@ #if defined(CFG_NIOS_EPCSBASE) #include <command.h> -#include <nios2.h> +#include <asm/io.h> #include <nios2-io.h> #include <nios2-epcs.h> @@ -72,8 +72,7 @@ */ #define EPCS_TIMEOUT 100 /* 100 msec timeout */ -static nios_spi_t *epcs = - (nios_spi_t *)CACHE_BYPASS(CFG_NIOS_EPCSBASE); +static nios_spi_t *epcs = (nios_spi_t *)CFG_NIOS_EPCSBASE; /*********************************************************************** * Device access @@ -81,16 +80,20 @@ static nios_spi_t *epcs = static int epcs_cs (int assert) { ulong start; + unsigned tmp; + if (assert) { - epcs->control |= NIOS_SPI_SSO; + tmp = readl (&epcs->control); + writel (&epcs->control, tmp | NIOS_SPI_SSO); } else { /* Let all bits shift out */ start = get_timer (0); - while ((epcs->status & NIOS_SPI_TMT) == 0) + while ((readl (&epcs->status) & NIOS_SPI_TMT) == 0) if (get_timer (start) > EPCS_TIMEOUT) return (-1); - epcs->control &= ~NIOS_SPI_SSO; + tmp = readl (&epcs->control); + writel (&epcs->control, tmp & ~NIOS_SPI_SSO); } return (0); } @@ -100,10 +103,10 @@ static int epcs_tx (unsigned char c) ulong start; start = get_timer (0); - while ((epcs->status & NIOS_SPI_TRDY) == 0) + while ((readl (&epcs->status) & NIOS_SPI_TRDY) == 0) if (get_timer (start) > EPCS_TIMEOUT) return (-1); - epcs->txdata = c; + writel (&epcs->txdata, c); return (0); } @@ -112,10 +115,10 @@ static int epcs_rx (void) ulong start; start = get_timer (0); - while ((epcs->status & NIOS_SPI_RRDY) == 0) + while ((readl (&epcs->status) & NIOS_SPI_RRDY) == 0) if (get_timer (start) > EPCS_TIMEOUT) return (-1); - return (epcs->rxdata); + return (readl (&epcs->rxdata)); } static unsigned char bitrev[] = { @@ -207,6 +210,21 @@ static struct epcs_devinfo_t devinfo[] = { { 0, 0, 0, 0, 0, 0 } }; +int epcs_reset (void) +{ + /* When booting from an epcs controller, the epcs bootrom + * code may leave the slave select in an asserted state. + * This causes two problems: (1) The initial epcs access + * will fail -- not a big deal, and (2) a software reset + * will cause the bootrom code to hang since it does not + * ensure the select is negated prior to first access -- a + * big deal. Here we just negate chip select and everything + * gets better :-) + */ + epcs_cs (0); /* Negate chip select */ + return (0); +} + epcs_devinfo_t *epcs_dev_find (void) { unsigned char buf[4]; |