diff options
Diffstat (limited to 'doc/board/starfive/milk-v_mars.rst')
| -rw-r--r-- | doc/board/starfive/milk-v_mars.rst | 18 |
1 files changed, 4 insertions, 14 deletions
diff --git a/doc/board/starfive/milk-v_mars.rst b/doc/board/starfive/milk-v_mars.rst index 554932ecfd4..ce4539a46f1 100644 --- a/doc/board/starfive/milk-v_mars.rst +++ b/doc/board/starfive/milk-v_mars.rst @@ -8,7 +8,7 @@ board. In U-Boot SPL the actual board is detected and the device-tree patched accordingly. Building -~~~~~~~~ +-------- 1. Add the RISC-V toolchain to your PATH. 2. Setup ARCH & cross compilation environment variable: @@ -40,7 +40,7 @@ This will generate the U-Boot SPL image (spl/u-boot-spl.bin.normal.out) as well as the FIT image (u-boot.itb) with OpenSBI and U-Boot. Device-tree selection -~~~~~~~~~~~~~~~~~~~~~ +--------------------- Depending on the board version U-Boot set variable $fdtfile to either starfive/jh7110-starfive-visionfive-2-v1.2a.dtb or @@ -57,15 +57,8 @@ environment or the configuration variable CONFIG_DEFAULT_FDT_FILE can be used to set to provide a default value. -Boot source selection -~~~~~~~~~~~~~~~~~~~~~ - -The board provides the DIP switches MSEL[1:0] to select the boot device out of -SPI flash, eMMC, SD-card, UART. To select booting from SD-card set the DIP -switches MSEL[1:0] to 10. - Preparing the SD-Card -~~~~~~~~~~~~~~~~~~~~~ +--------------------- The device firmware loads U-Boot SPL (u-boot-spl.bin.normal.out) from the partition with type GUID 2E54B353-1271-4842-806F-E436D6AF6985. You are free @@ -105,7 +98,4 @@ Copy U-Boot to the SD card sudo cp jh7110-starfive-visionfive-2.dtb /mnt/ sudo umount /mnt -Booting -~~~~~~~ - -Once you plugin the sdcard and power up, you should see the U-Boot prompt. +.. include:: jh7110_common.rst |