diff options
Diffstat (limited to 'doc/device-tree-bindings')
| -rw-r--r-- | doc/device-tree-bindings/gpio/intel,apl-gpio.txt | 2 | ||||
| -rw-r--r-- | doc/device-tree-bindings/net/ti,dp83867.txt | 35 | ||||
| -rw-r--r-- | doc/device-tree-bindings/pinctrl/intel,apl-pinctrl.txt | 2 |
3 files changed, 2 insertions, 37 deletions
diff --git a/doc/device-tree-bindings/gpio/intel,apl-gpio.txt b/doc/device-tree-bindings/gpio/intel,apl-gpio.txt index e27a40b4374..cf0659b70ec 100644 --- a/doc/device-tree-bindings/gpio/intel,apl-gpio.txt +++ b/doc/device-tree-bindings/gpio/intel,apl-gpio.txt @@ -23,7 +23,7 @@ Example: { p2sb: p2sb@d,0 { reg = <0x02006810 0 0 0 0>; - compatible = "intel,apl-p2sb"; + compatible = "intel,p2sb"; early-regs = <IOMAP_P2SB_BAR 0x100000>; north { diff --git a/doc/device-tree-bindings/net/ti,dp83867.txt b/doc/device-tree-bindings/net/ti,dp83867.txt deleted file mode 100644 index 268220964aa..00000000000 --- a/doc/device-tree-bindings/net/ti,dp83867.txt +++ /dev/null @@ -1,35 +0,0 @@ -* Texas Instruments - dp83867 Giga bit ethernet phy - -Required properties: - - reg - The ID number for the phy, usually a small integer - - ti,rx-internal-delay - RGMII Recieve Clock Delay - see dt-bindings/net/ti-dp83867.h - for applicable values - - ti,tx-internal-delay - RGMII Transmit Clock Delay - see dt-bindings/net/ti-dp83867.h - for applicable values - - ti,fifo-depth - Transmitt FIFO depth- see dt-bindings/net/ti-dp83867.h - for applicable values - - enet-phy-lane-swap - Indicates that PHY will swap the TX/RX lanes to - compensate for the board being designed with the lanes swapped. - - enet-phy-no-lane-swap - Indicates that PHY will disable swap of the - TX/RX lanes. - - ti,clk-output-sel - Muxing option for CLK_OUT pin. See dt-bindings/net/ti-dp83867.h - for applicable values. The CLK_OUT pin can also - be disabled by this property. When omitted, the - PHY's default will be left as is. - -Default child nodes are standard Ethernet PHY device -nodes as described in doc/devicetree/bindings/net/ethernet.txt - -Example: - - ethernet-phy@0 { - reg = <0>; - ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>; - ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_75_NS>; - ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; - enet-phy-lane-no-swap; - ti,clk-output-sel = <DP83867_CLK_O_SEL_CHN_A_TCLK>; - }; - -Datasheet can be found: -http://www.ti.com/product/DP83867IR/datasheet diff --git a/doc/device-tree-bindings/pinctrl/intel,apl-pinctrl.txt b/doc/device-tree-bindings/pinctrl/intel,apl-pinctrl.txt index cd7f8a0ca38..12ec8461073 100644 --- a/doc/device-tree-bindings/pinctrl/intel,apl-pinctrl.txt +++ b/doc/device-tree-bindings/pinctrl/intel,apl-pinctrl.txt @@ -23,7 +23,7 @@ Example: { p2sb: p2sb@d,0 { reg = <0x02006810 0 0 0 0>; - compatible = "intel,apl-p2sb"; + compatible = "intel,p2sb"; early-regs = <IOMAP_P2SB_BAR 0x100000>; n { |