summaryrefslogtreecommitdiff
path: root/doc
diff options
context:
space:
mode:
Diffstat (limited to 'doc')
-rw-r--r--doc/imx/common/imx25.txt (renamed from doc/README.imx25)0
-rw-r--r--doc/imx/common/imx27.txt (renamed from doc/README.imx27)0
-rw-r--r--doc/imx/common/imx5.txt (renamed from doc/README.imx5)0
-rw-r--r--doc/imx/common/imx6.txt (renamed from doc/README.imx6)25
-rw-r--r--doc/imx/common/mxs.txt (renamed from doc/README.mxs)0
-rw-r--r--doc/imx/hab/habv4/encrypted_boot.txt43
-rw-r--r--doc/imx/hab/habv4/secure_boot.txt (renamed from doc/README.mxc_hab)44
-rw-r--r--doc/imx/misc/sdp.txt (renamed from doc/README.sdp)22
-rw-r--r--doc/imx/mkimage/imximage.txt (renamed from doc/README.imximage)0
-rw-r--r--doc/imx/mkimage/mxsimage.txt (renamed from doc/README.mxsimage)0
10 files changed, 63 insertions, 71 deletions
diff --git a/doc/README.imx25 b/doc/imx/common/imx25.txt
index 0ca21b6dfe..0ca21b6dfe 100644
--- a/doc/README.imx25
+++ b/doc/imx/common/imx25.txt
diff --git a/doc/README.imx27 b/doc/imx/common/imx27.txt
index 6f92cb47ce..6f92cb47ce 100644
--- a/doc/README.imx27
+++ b/doc/imx/common/imx27.txt
diff --git a/doc/README.imx5 b/doc/imx/common/imx5.txt
index ea0e144ced..ea0e144ced 100644
--- a/doc/README.imx5
+++ b/doc/imx/common/imx5.txt
diff --git a/doc/README.imx6 b/doc/imx/common/imx6.txt
index b0644f8491..eab88353f6 100644
--- a/doc/README.imx6
+++ b/doc/imx/common/imx6.txt
@@ -88,28 +88,3 @@ Reading bank 4:
Word 0x00000002: 9f027772 00000004
-2. Using imx_usb_loader for first install with SPL
---------------------------------------------------
-
-imx_usb_loader is a very nice tool by Boundary Devices that
-allow to install U-Boot without a JTAG debugger, using
-the USB boot mode as described in the manual. It is
-a replacement for Freescale's MFGTOOLS.
-
-The sources can be found here:
-
- https://github.com/boundarydevices/imx_usb_loader.git
-
-Booting in USB mode, the i.MX6 announces itself to the Linux Host as:
-
-Bus 001 Device 111: ID 15a2:0061 Freescale Semiconductor, Inc.
-
-imx_usb_loader is able to download a single file (u-boot.imx)
-to the board. For boards without SPL support, it is enough to
-issue the command:
-
- sudo ../imx_usb_loader/imx_usb -v u-boot.imx
-
-In order to load SPL and u-boot.img via imx_usb_loader tool,
-please refer to doc/README.sdp.
-
diff --git a/doc/README.mxs b/doc/imx/common/mxs.txt
index e23ab9cc6d..e23ab9cc6d 100644
--- a/doc/README.mxs
+++ b/doc/imx/common/mxs.txt
diff --git a/doc/imx/hab/habv4/encrypted_boot.txt b/doc/imx/hab/habv4/encrypted_boot.txt
new file mode 100644
index 0000000000..c59d204d38
--- /dev/null
+++ b/doc/imx/hab/habv4/encrypted_boot.txt
@@ -0,0 +1,43 @@
+1. Setup U-Boot Image for Encrypted Boot
+----------------------------------------
+An authenticated U-Boot image is used as starting point for
+Encrypted Boot. The image is encrypted by i.MX Code Signing
+Tool (CST). The CST replaces only the image data of
+u-boot-dtb.imx with the encrypted data. The Initial Vector Table,
+DCD, and Boot data, remains in plaintext.
+
+The image data is encrypted with a Encryption Key (DEK).
+Therefore, this key is needed to decrypt the data during the
+booting process. The DEK is protected by wrapping it in a Blob,
+which needs to be appended to the U-Boot image and specified in
+the CSF file.
+
+The DEK blob is generated by an authenticated U-Boot image with
+the dek_blob cmd enabled. The image used for DEK blob generation
+needs to have the following configurations enabled in Kconfig:
+
+CONFIG_SECURE_BOOT=y
+CONFIG_CMD_DEKBLOB=y
+
+Note: The encrypted boot feature is only supported by HABv4 or
+greater.
+
+The dek_blob command then can be used to generate the DEK blob of
+a DEK previously loaded in memory. The command is used as follows:
+
+dek_blob <DEK address> <Output Address> <Key Size in Bits>
+example: dek_blob 0x10800000 0x10801000 192
+
+The resulting DEK blob then is used to construct the encrypted
+U-Boot image. Note that the blob needs to be transferred back
+to the host.Then the following commands are used to construct
+the final image.
+
+cat u-boot-dtb.imx csf-u-boot.bin > u-boot-signed.imx
+objcopy -I binary -O binary --pad-to <blob_dst> --gap-fill=0x00 \
+ u-boot-signed.imx u-boot-signed-pad.bin
+cat u-boot-signed-pad.imx DEK_blob.bin > u-boot-encrypted.imx
+
+ NOTE: u-boot-signed.bin needs to be padded to the value
+ equivalent to the address in which the DEK blob is specified
+ in the CSF.
diff --git a/doc/README.mxc_hab b/doc/imx/hab/habv4/secure_boot.txt
index a40ebf3e84..ae68dc8040 100644
--- a/doc/README.mxc_hab
+++ b/doc/imx/hab/habv4/secure_boot.txt
@@ -98,47 +98,3 @@ cat u-boot-ivt.img csf-u-boot.bin > u-boot-signed.img
These two signed binaries can be used on an i.MX in closed
configuration when the according SRK Table Hash has been flashed.
-
-4. Setup U-Boot Image for Encrypted Boot
-----------------------------------------
-An authenticated U-Boot image is used as starting point for
-Encrypted Boot. The image is encrypted by i.MX Code Signing
-Tool (CST). The CST replaces only the image data of
-u-boot-dtb.imx with the encrypted data. The Initial Vector Table,
-DCD, and Boot data, remains in plaintext.
-
-The image data is encrypted with a Encryption Key (DEK).
-Therefore, this key is needed to decrypt the data during the
-booting process. The DEK is protected by wrapping it in a Blob,
-which needs to be appended to the U-Boot image and specified in
-the CSF file.
-
-The DEK blob is generated by an authenticated U-Boot image with
-the dek_blob cmd enabled. The image used for DEK blob generation
-needs to have the following configurations enabled in Kconfig:
-
-CONFIG_SECURE_BOOT=y
-CONFIG_CMD_DEKBLOB=y
-
-Note: The encrypted boot feature is only supported by HABv4 or
-greater.
-
-The dek_blob command then can be used to generate the DEK blob of
-a DEK previously loaded in memory. The command is used as follows:
-
-dek_blob <DEK address> <Output Address> <Key Size in Bits>
-example: dek_blob 0x10800000 0x10801000 192
-
-The resulting DEK blob then is used to construct the encrypted
-U-Boot image. Note that the blob needs to be transferred back
-to the host.Then the following commands are used to construct
-the final image.
-
-cat u-boot-dtb.imx csf-u-boot.bin > u-boot-signed.imx
-objcopy -I binary -O binary --pad-to <blob_dst> --gap-fill=0x00 \
- u-boot-signed.imx u-boot-signed-pad.bin
-cat u-boot-signed-pad.imx DEK_blob.bin > u-boot-encrypted.imx
-
- NOTE: u-boot-signed.bin needs to be padded to the value
- equivalent to the address in which the DEK blob is specified
- in the CSF.
diff --git a/doc/README.sdp b/doc/imx/misc/sdp.txt
index 178ea688a7..6ea6e41395 100644
--- a/doc/README.sdp
+++ b/doc/imx/misc/sdp.txt
@@ -16,14 +16,19 @@ protocols allow to access a USB device without OS specific drivers. The
U-Boot implementation has primarly been tested using the open source
imx_loader utility (https://github.com/boundarydevices/imx_usb_loader).
+imx_usb_loader is a very nice tool by Boundary Devices that allow to
+install U-Boot without a JTAG debugger, using the USB boot mode as
+described in the manual. It is a replacement for Freescale's
+MFGTOOLS.
+
The host side utilities are typically capable to interpret the i.MX
specific image header (see doc/README.imximage). There are extensions
for imx_loader's imx_usb utility which allow to interpret the U-Boot
specific legacy image format (see mkimage(1)). Also the U-Boot side
support beside the i.MX specific header the U-Boot legacy header.
-Usage
------
+1. Using imx_usb_loader for first install with SPL
+--------------------------------------------------
This implementation can be started in U-Boot using the sdp command
(CONFIG_CMD_USB_SDP) or in SPL if Serial Downloader boot mode has been
@@ -98,3 +103,16 @@ With that SPL and U-Boot can be downloaded with a single invocation
of imx_usb without arguments:
# imx_usb
+
+2. Using imx_usb_loader non-SPL images
+---------------------------------------
+
+Booting in USB mode, the i.MX6 announces itself to the Linux Host as:
+
+Bus 001 Device 111: ID 15a2:0061 Freescale Semiconductor, Inc.
+
+imx_usb_loader is able to download a single file (u-boot.imx)
+to the board. For boards without SPL support, it is enough to
+issue the command:
+
+ sudo ../imx_usb_loader/imx_usb -v u-boot.imx
diff --git a/doc/README.imximage b/doc/imx/mkimage/imximage.txt
index 803682f558..803682f558 100644
--- a/doc/README.imximage
+++ b/doc/imx/mkimage/imximage.txt
diff --git a/doc/README.mxsimage b/doc/imx/mkimage/mxsimage.txt
index c3975ee5e6..c3975ee5e6 100644
--- a/doc/README.mxsimage
+++ b/doc/imx/mkimage/mxsimage.txt