diff options
Diffstat (limited to 'drivers/mmc')
| -rw-r--r-- | drivers/mmc/Kconfig | 66 | ||||
| -rw-r--r-- | drivers/mmc/dw_mmc.c | 4 | ||||
| -rw-r--r-- | drivers/mmc/mtk-sd.c | 21 |
3 files changed, 44 insertions, 47 deletions
diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig index f4fdf15242c..4827834b4aa 100644 --- a/drivers/mmc/Kconfig +++ b/drivers/mmc/Kconfig @@ -3,7 +3,8 @@ menu "MMC Host controller Support" config MMC bool "MMC/SD/SDIO card support" default ARM || PPC || SANDBOX - select DM_MMC if DM + select BLK + select DM_MMC help This selects MultiMediaCard, Secure Digital and Secure Digital I/O support. @@ -39,14 +40,14 @@ config MMC_BROKEN_CD If card detection feature is broken, just poll to detect. config DM_MMC - bool "Enable MMC controllers using Driver Model" + bool depends on DM help - This enables the MultiMediaCard (MMC) uclass which supports MMC and - Secure Digital I/O (SDIO) cards. Both removable (SD, micro-SD, etc.) - and non-removable (e.g. eMMC chip) devices are supported. These - appear as block devices in U-Boot and can support filesystems such - as EXT4 and FAT. + This enables the MultiMediaCard (MMC) driver model uclass which + supports MMC and Secure Digital I/O (SDIO) cards. Both removable (SD, + micro-SD, etc.) and non-removable (e.g. eMMC chip) devices are + supported. These appear as block devices in U-Boot and can support + filesystems such as EXT4 and FAT. config SPL_DM_MMC bool "Enable MMC controllers using Driver Model in SPL" @@ -79,7 +80,7 @@ config MMC_SDHCI_ADMA_HELPERS config MMC_SPI bool "Support for SPI-based MMC controller" - depends on DM_MMC && DM_SPI + depends on DM_SPI help This selects SPI-based MMC controllers. If you have an MMC controller on a SPI bus, say Y here. @@ -97,7 +98,6 @@ config MMC_SPI_CRC_ON config ARM_PL180_MMCI bool "ARM AMBA Multimedia Card Interface and compatible support" - depends on DM_MMC help This selects the ARM(R) AMBA(R) PrimeCell Multimedia Card Interface (PL180, PL181 and compatible) support. @@ -258,7 +258,6 @@ config MMC_DW config MMC_DW_CORTINA bool "Cortina specific extensions for Synopsys DW Memory Card Interface" - depends on DM_MMC depends on MMC_DW help This selects support for Cortina SoC specific extensions to the @@ -285,7 +284,7 @@ config MMC_DW_K3 config MMC_DW_ROCKCHIP bool "Rockchip SD/MMC controller support" - depends on DM_MMC && OF_CONTROL + depends on OF_CONTROL depends on MMC_DW help This enables support for the Rockchip SD/MMM controller, which is @@ -306,7 +305,6 @@ config MMC_DW_SOCFPGA config MMC_DW_SNPS bool "Extensions for DW Memory Card Interface used in Synopsys ARC devboards" depends on MMC_DW - depends on DM_MMC depends on OF_CONTROL depends on CLK help @@ -317,13 +315,12 @@ config NEXELL_DWMMC bool "Nexell SD/MMC controller support" depends on ARCH_NEXELL depends on MMC_DW - depends on DM_MMC depends on PINCTRL_NEXELL default y config MMC_MESON_GX bool "Meson GX EMMC controller support" - depends on DM_MMC && ARCH_MESON + depends on ARCH_MESON help Support for EMMC host controller on Meson GX ARM SoCs platform (S905) @@ -338,7 +335,7 @@ config MMC_MXC config MMC_OWL bool "Actions OWL Multimedia Card Interface support" - depends on ARCH_OWL && DM_MMC && BLK + depends on ARCH_OWL help This selects the OWL SD/MMC host controller found on board based on Actions S700/S900 SoC. @@ -366,7 +363,6 @@ config MMC_PCI config MMC_OCTEONTX bool "Marvell Octeon Multimedia Card Interface support" depends on (ARCH_OCTEON || ARCH_OCTEONTX || ARCH_OCTEONTX2) - depends on DM_MMC select MMC_SUPPORTS_TUNING if ARCH_OCTEONTX2 help This selects the Octeon Multimedia card Interface. @@ -377,7 +373,7 @@ config MMC_OCTEONTX config MVEBU_MMC bool "Kirkwood MMC controller support" - depends on DM_MMC && ARCH_KIRKWOOD + depends on ARCH_KIRKWOOD help Support for MMC host controller on Kirkwood SoCs. If you are on a Kirkwood architecture, say Y here. @@ -386,8 +382,7 @@ config MVEBU_MMC config MMC_OMAP_HS bool "TI OMAP High Speed Multimedia Card Interface support" - select DM_REGULATOR_PBIAS if DM_MMC && DM_REGULATOR - select DM_REGULATOR_PBIAS if DM_MMC && DM_REGULATOR + select DM_REGULATOR_PBIAS if DM_REGULATOR help This selects the TI OMAP High Speed Multimedia card Interface. If you have an omap2plus board with a Multimedia Card slot, @@ -430,7 +425,6 @@ config SH_MMCIF config MMC_UNIPHIER bool "UniPhier SD/MMC Host Controller support" depends on ARCH_UNIPHIER - depends on DM_MMC depends on OF_CONTROL help This selects support for the Matsushita SD/MMC Host Controller on @@ -439,7 +433,6 @@ config MMC_UNIPHIER config RENESAS_SDHI bool "Renesas R-Car SD/MMC Host Controller support" depends on ARCH_RENESAS - depends on DM_MMC depends on OF_CONTROL select BOUNCE_BUFFER help @@ -449,7 +442,6 @@ config RENESAS_SDHI config MMC_BCM2835 bool "BCM2835 family custom SD/MMC Host Controller support" depends on ARCH_BCM283X - depends on DM_MMC depends on OF_CONTROL default y help @@ -469,7 +461,7 @@ config JZ47XX_MMC config MMC_SANDBOX bool "Sandbox MMC support" depends on SANDBOX - depends on DM_MMC && OF_CONTROL + depends on OF_CONTROL help This select a dummy sandbox MMC driver. At present this does nothing other than allow sandbox to be build with MMC support. This @@ -559,7 +551,6 @@ config FIXED_SDHCI_ALIGNED_BUFFER config MMC_SDHCI_ASPEED bool "Aspeed SDHCI controller" depends on ARCH_ASPEED - depends on DM_MMC depends on MMC_SDHCI select MISC help @@ -571,7 +562,7 @@ config MMC_SDHCI_ASPEED config MMC_SDHCI_ATMEL bool "Atmel SDHCI controller support" depends on ARCH_AT91 - depends on DM_MMC && ARCH_AT91 + depends on ARCH_AT91 depends on MMC_SDHCI help This enables support for the Atmel SDHCI controller, which supports @@ -606,7 +597,6 @@ config MMC_SDHCI_BCMSTB config MMC_SDHCI_CADENCE bool "SDHCI support for the Cadence SD/SDIO/eMMC controller" - depends on DM_MMC depends on MMC_SDHCI depends on OF_CONTROL help @@ -618,7 +608,6 @@ config MMC_SDHCI_CADENCE config MMC_SDHCI_CV1800B bool "SDHCI support for the CV1800B SD/SDIO/eMMC controller" - depends on DM_MMC depends on MMC_SDHCI depends on OF_CONTROL help @@ -633,7 +622,7 @@ config MMC_SDHCI_AM654 bool "SDHCI Controller on TI's Am654 devices" depends on ARCH_K3 depends on MMC_SDHCI - depends on DM_MMC && OF_CONTROL && BLK + depends on OF_CONTROL depends on REGMAP select MMC_SDHCI_IO_ACCESSORS help @@ -653,7 +642,6 @@ config MMC_SDHCI_IPROC config MMC_SDHCI_F_SDH30 bool "SDHCI support for Fujitsu Semiconductor/Socionext F_SDH30" - depends on DM_MMC depends on MMC_SDHCI help This selects the Secure Digital Host Controller Interface (SDHCI) @@ -673,7 +661,6 @@ config MMC_SDHCI_KONA config MMC_SDHCI_MSM bool "Qualcomm SDHCI controller" - depends on DM_MMC depends on MMC_SDHCI help Enables support for SDHCI 2.0 controller present on some Qualcomm @@ -685,7 +672,6 @@ config MMC_SDHCI_MV bool "SDHCI support on Marvell platform" depends on ARCH_MVEBU depends on MMC_SDHCI - depends on DM_MMC help This selects the Secure Digital Host Controller Interface on Marvell platform. @@ -697,7 +683,6 @@ config MMC_SDHCI_MV config MMC_SDHCI_NPCM bool "SDHCI support on Nuvoton NPCM device" depends on MMC_SDHCI - depends on DM_MMC help This selects the Secure Digital Host Controller Interface (SDHCI) on Nuvoton NPCM device. @@ -708,7 +693,7 @@ config MMC_SDHCI_NPCM config MMC_SDHCI_PIC32 bool "Microchip PIC32 on-chip SDHCI support" - depends on DM_MMC && MACH_PIC32 + depends on MACH_PIC32 depends on MMC_SDHCI help Support for Microchip PIC32 SDHCI controller. @@ -716,7 +701,6 @@ config MMC_SDHCI_PIC32 config MMC_SDHCI_ROCKCHIP bool "Arasan SDHCI controller for Rockchip support" depends on ARCH_ROCKCHIP - depends on DM_MMC && BLK depends on MMC_SDHCI help Support for Arasan SDHCI host controller on Rockchip ARM SoCs platform @@ -735,7 +719,6 @@ config MMC_SDHCI_S5P config MMC_SDHCI_SNPS bool "Synopsys DesignWare SDHCI controller" depends on MMC_SDHCI - depends on DM_MMC help Support for DesignWare SDHCI host controller on Alibaba TH1520 SoC. This is a highly configurable and programmable, high performance @@ -753,7 +736,7 @@ config MMC_SDHCI_STI config MMC_SDHCI_XENON bool "SDHCI support for the Xenon SDHCI controller" - depends on MMC_SDHCI && DM_MMC && OF_CONTROL + depends on MMC_SDHCI && OF_CONTROL help Support for Xenon SDHCI host controller on Marvell Armada 3700 7k/8k ARM SoCs platforms @@ -764,7 +747,6 @@ config MMC_SDHCI_XENON config MMC_SDHCI_TANGIER bool "Tangier SDHCI controller support" - depends on DM_MMC && BLK depends on MMC_SDHCI help This selects support for SDHCI controller on Tanginer @@ -800,7 +782,7 @@ config TEGRA124_MMC_DISABLE_EXT_LOOPBACK config MMC_SDHCI_ZYNQ bool "Arasan SDHCI controller support" - depends on DM_MMC && OF_CONTROL && BLK + depends on OF_CONTROL depends on MMC_SDHCI help Support for Arasan SDHCI host controller on Zynq/ZynqMP ARM SoCs platform @@ -842,7 +824,6 @@ config MMC_SUNXI_HAS_MODE_SWITCH config MMC_PITON bool "MMC support for OpenPiton SoC" - depends on DM_MMC && BLK help This selects support for the SD host controller on OpenPiton SoC. Note that this SD controller directly exposes the contents of the @@ -851,7 +832,7 @@ config MMC_PITON config GENERIC_ATMEL_MCI bool "Atmel Multimedia Card Interface support" - depends on DM_MMC && ARCH_AT91 + depends on ARCH_AT91 help This enables support for Atmel High Speed Multimedia Card Interface (HSMCI), which supports the MultiMedia Card (MMC) Specification V4.3, @@ -860,7 +841,7 @@ config GENERIC_ATMEL_MCI config STM32_SDMMC2 bool "STMicroelectronics STM32H7 SD/MMC Host Controller support" - depends on DM_MMC && OF_CONTROL + depends on OF_CONTROL help This selects support for the SD/MMC controller on STM32H7 SoCs. If you have a board based on such a SoC and with a SD/MMC slot, @@ -880,7 +861,6 @@ config FTSDC010_SDIO config MMC_MTK bool "MediaTek SD/MMC Card Interface support" depends on ARCH_MEDIATEK || ARCH_MTMIPS - depends on DM_MMC depends on OF_CONTROL help This selects the MediaTek(R) Secure digital and Multimedia card Interface. @@ -911,7 +891,7 @@ config FSL_ESDHC_SUPPORT_ADMA2 config FSL_ESDHC_33V_IO_RELIABILITY_WORKAROUND bool "enable eSDHC workaround for 3.3v IO reliability issue" - depends on FSL_ESDHC && DM_MMC + depends on FSL_ESDHC help When eSDHC operates at 3.3v, damage can accumulate in an internal level shifter at a higher than expected rate. The faster the interface diff --git a/drivers/mmc/dw_mmc.c b/drivers/mmc/dw_mmc.c index e1110cace89..a51494380ce 100644 --- a/drivers/mmc/dw_mmc.c +++ b/drivers/mmc/dw_mmc.c @@ -724,7 +724,7 @@ static int dwmci_init(struct mmc *mmc) return 0; } -#ifdef CONFIG_DM_MMC +#if CONFIG_IS_ENABLED(DM_MMC) int dwmci_probe(struct udevice *dev) { struct mmc *mmc = mmc_get_mmc_dev(dev); @@ -749,7 +749,7 @@ void dwmci_setup_cfg(struct mmc_config *cfg, struct dwmci_host *host, u32 max_clk, u32 min_clk) { cfg->name = host->name; -#ifndef CONFIG_DM_MMC +#if !CONFIG_IS_ENABLED(DM_MMC) cfg->ops = &dwmci_ops; #endif cfg->f_min = min_clk; diff --git a/drivers/mmc/mtk-sd.c b/drivers/mmc/mtk-sd.c index d676cf9e314..2bc700b0d05 100644 --- a/drivers/mmc/mtk-sd.c +++ b/drivers/mmc/mtk-sd.c @@ -329,6 +329,7 @@ struct msdc_compatible { u8 clk_div_bits; bool pad_tune0; bool async_fifo; + bool async_fifo_crcsts; bool data_tune; bool busy_check; bool stop_clk_fix; @@ -1553,8 +1554,12 @@ static void msdc_init_hw(struct msdc_host *host) /* use async fifo to avoid tune internal delay */ clrbits_le32(&host->base->patch_bit2, MSDC_PB2_CFGRESP); - clrbits_le32(&host->base->patch_bit2, - MSDC_PB2_CFGCRCSTS); + if (host->dev_comp->async_fifo_crcsts) + setbits_le32(&host->base->patch_bit2, + MSDC_PB2_CFGCRCSTS); + else + clrbits_le32(&host->base->patch_bit2, + MSDC_PB2_CFGCRCSTS); } if (host->dev_comp->data_tune) { @@ -1844,6 +1849,17 @@ static const struct msdc_compatible mt7986_compat = { .enhance_rx = true, }; +static const struct msdc_compatible mt7987_compat = { + .clk_div_bits = 12, + .pad_tune0 = true, + .async_fifo = true, + .async_fifo_crcsts = true, + .data_tune = true, + .busy_check = true, + .stop_clk_fix = true, + .enhance_rx = true, +}; + static const struct msdc_compatible mt7981_compat = { .clk_div_bits = 12, .pad_tune0 = true, @@ -1886,6 +1902,7 @@ static const struct udevice_id msdc_ids[] = { { .compatible = "mediatek,mt7622-mmc", .data = (ulong)&mt7622_compat }, { .compatible = "mediatek,mt7623-mmc", .data = (ulong)&mt7623_compat }, { .compatible = "mediatek,mt7986-mmc", .data = (ulong)&mt7986_compat }, + { .compatible = "mediatek,mt7987-mmc", .data = (ulong)&mt7987_compat }, { .compatible = "mediatek,mt7981-mmc", .data = (ulong)&mt7981_compat }, { .compatible = "mediatek,mt8512-mmc", .data = (ulong)&mt8512_compat }, { .compatible = "mediatek,mt8516-mmc", .data = (ulong)&mt8516_compat }, |