diff options
Diffstat (limited to 'drivers/mtd/nand')
| -rw-r--r-- | drivers/mtd/nand/Makefile | 4 | ||||
| -rw-r--r-- | drivers/mtd/nand/raw/Makefile | 4 | ||||
| -rw-r--r-- | drivers/mtd/nand/raw/atmel_nand.c | 4 | ||||
| -rw-r--r-- | drivers/mtd/nand/raw/lpc32xx_nand_mlc.c | 6 | ||||
| -rw-r--r-- | drivers/mtd/nand/raw/lpc32xx_nand_slc.c | 8 | ||||
| -rw-r--r-- | drivers/mtd/nand/raw/nand_base.c | 10 | ||||
| -rw-r--r-- | drivers/mtd/nand/raw/omap_gpmc.c | 4 | ||||
| -rw-r--r-- | drivers/mtd/nand/raw/sand_nand.c | 4 |
8 files changed, 22 insertions, 22 deletions
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile index 96e186600a1..c8169cf7390 100644 --- a/drivers/mtd/nand/Makefile +++ b/drivers/mtd/nand/Makefile @@ -1,10 +1,10 @@ # SPDX-License-Identifier: GPL-2.0+ -ifeq ($(CONFIG_SPL_BUILD)$(CONFIG_TPL_BUILD),) +ifeq ($(CONFIG_XPL_BUILD)$(CONFIG_TPL_BUILD),) nandcore-objs := core.o bbt.o obj-$(CONFIG_MTD_NAND_CORE) += nandcore.o obj-$(CONFIG_MTD_RAW_NAND) += raw/ obj-$(CONFIG_MTD_SPI_NAND) += spi/ else -obj-$(CONFIG_$(SPL_TPL_)NAND_SUPPORT) += raw/ +obj-$(CONFIG_$(PHASE_)NAND_SUPPORT) += raw/ endif diff --git a/drivers/mtd/nand/raw/Makefile b/drivers/mtd/nand/raw/Makefile index 46fead6fa48..b47a3d787ce 100644 --- a/drivers/mtd/nand/raw/Makefile +++ b/drivers/mtd/nand/raw/Makefile @@ -3,7 +3,7 @@ # (C) Copyright 2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. -ifdef CONFIG_SPL_BUILD +ifdef CONFIG_XPL_BUILD ifdef CONFIG_SPL_NAND_DRIVERS NORMAL_DRIVERS=y @@ -18,7 +18,7 @@ obj-$(CONFIG_SPL_NAND_BASE) += nand_base.o nand_amd.o nand_hynix.o \ nand_macronix.o nand_micron.o \ nand_samsung.o nand_toshiba.o obj-$(CONFIG_SPL_NAND_IDENT) += nand_ids.o nand_timings.o -obj-$(CONFIG_$(SPL_TPL_)NAND_INIT) += nand.o +obj-$(CONFIG_$(PHASE_)NAND_INIT) += nand.o ifeq ($(CONFIG_SPL_ENV_SUPPORT),y) obj-$(CONFIG_ENV_IS_IN_NAND) += nand_util.o endif diff --git a/drivers/mtd/nand/raw/atmel_nand.c b/drivers/mtd/nand/raw/atmel_nand.c index 4dbf7b47135..605298628d6 100644 --- a/drivers/mtd/nand/raw/atmel_nand.c +++ b/drivers/mtd/nand/raw/atmel_nand.c @@ -1251,7 +1251,7 @@ static int at91_nand_ready(struct mtd_info *mtd) } #endif -#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_XPL_BUILD /* The following code is for SPL */ static struct mtd_info *mtd; static struct nand_chip nand_chip; @@ -1526,4 +1526,4 @@ void board_nand_init(void) if (atmel_nand_chip_init(i, base_addr[i])) log_err("atmel_nand: Fail to initialize #%d chip", i); } -#endif /* CONFIG_SPL_BUILD */ +#endif /* CONFIG_XPL_BUILD */ diff --git a/drivers/mtd/nand/raw/lpc32xx_nand_mlc.c b/drivers/mtd/nand/raw/lpc32xx_nand_mlc.c index c89661badbf..4430c4e93ee 100644 --- a/drivers/mtd/nand/raw/lpc32xx_nand_mlc.c +++ b/drivers/mtd/nand/raw/lpc32xx_nand_mlc.c @@ -152,7 +152,7 @@ static void lpc32xx_nand_init(void) &lpc32xx_nand_mlc_registers->time_reg); } -#if !defined(CONFIG_SPL_BUILD) +#if !defined(CONFIG_XPL_BUILD) /** * lpc32xx_cmd_ctrl - write command to either cmd or data register @@ -606,7 +606,7 @@ void board_nand_init(void) pr_err("nand_register returned %i", ret); } -#else /* defined(CONFIG_SPL_BUILD) */ +#else /* defined(CONFIG_XPL_BUILD) */ void nand_init(void) { @@ -770,4 +770,4 @@ unsigned int nand_page_size(void) return BYTES_PER_PAGE; } -#endif /* CONFIG_SPL_BUILD */ +#endif /* CONFIG_XPL_BUILD */ diff --git a/drivers/mtd/nand/raw/lpc32xx_nand_slc.c b/drivers/mtd/nand/raw/lpc32xx_nand_slc.c index 4d643bc64bc..109c31fb4d1 100644 --- a/drivers/mtd/nand/raw/lpc32xx_nand_slc.c +++ b/drivers/mtd/nand/raw/lpc32xx_nand_slc.c @@ -84,7 +84,7 @@ static struct nand_ecclayout lpc32xx_nand_oob_16 = { } }; -#if defined(CONFIG_DMA_LPC32XX) && !defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_DMA_LPC32XX) && !defined(CONFIG_XPL_BUILD) #define ECCSTEPS (CONFIG_SYS_NAND_PAGE_SIZE / CFG_SYS_NAND_ECCSIZE) /* @@ -162,7 +162,7 @@ static int lpc32xx_nand_dev_ready(struct mtd_info *mtd) return readl(&lpc32xx_nand_slc_regs->stat) & STAT_NAND_READY; } -#if defined(CONFIG_DMA_LPC32XX) && !defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_DMA_LPC32XX) && !defined(CONFIG_XPL_BUILD) /* * Prepares DMA descriptors for NAND RD/WR operations * If the size is < 256 Bytes then it is assumed to be @@ -510,7 +510,7 @@ static void lpc32xx_write_byte(struct mtd_info *mtd, uint8_t byte) */ int board_nand_init(struct nand_chip *lpc32xx_chip) { -#if defined(CONFIG_DMA_LPC32XX) && !defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_DMA_LPC32XX) && !defined(CONFIG_XPL_BUILD) int ret; /* Acquire a channel for our use */ @@ -533,7 +533,7 @@ int board_nand_init(struct nand_chip *lpc32xx_chip) lpc32xx_chip->read_byte = lpc32xx_read_byte; lpc32xx_chip->write_byte = lpc32xx_write_byte; -#if defined(CONFIG_DMA_LPC32XX) && !defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_DMA_LPC32XX) && !defined(CONFIG_XPL_BUILD) /* Hardware ECC calculation is supported when DMA driver is selected */ lpc32xx_chip->ecc.mode = NAND_ECC_HW; diff --git a/drivers/mtd/nand/raw/nand_base.c b/drivers/mtd/nand/raw/nand_base.c index 0545c23e268..1b65c6f6443 100644 --- a/drivers/mtd/nand/raw/nand_base.c +++ b/drivers/mtd/nand/raw/nand_base.c @@ -414,7 +414,7 @@ static int nand_block_markbad_lowlevel(struct mtd_info *mtd, loff_t ofs) { struct nand_chip *chip = mtd_to_nand(mtd); int ret = 0; -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD int res; #endif @@ -434,7 +434,7 @@ static int nand_block_markbad_lowlevel(struct mtd_info *mtd, loff_t ofs) nand_release_device(mtd); } -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD /* Mark block bad in BBT */ if (chip->bbt) { res = nand_markbad_bbt(mtd, ofs); @@ -488,7 +488,7 @@ static int nand_block_isreserved(struct mtd_info *mtd, loff_t ofs) if (!chip->bbt) return 0; /* Return info from the table */ -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD return nand_isreserved_bbt(mtd, ofs); #else return 0; @@ -518,7 +518,7 @@ static int nand_block_checkbad(struct mtd_info *mtd, loff_t ofs, int allowbbt) return chip->block_bad(mtd, ofs); /* Return info from the table */ -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD return nand_isbad_bbt(mtd, ofs, allowbbt); #else return 0; @@ -3729,7 +3729,7 @@ static void nand_set_defaults(struct nand_chip *chip, int busw) if (!chip->read_buf || chip->read_buf == nand_read_buf) chip->read_buf = busw ? nand_read_buf16 : nand_read_buf; -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD if (!chip->scan_bbt) chip->scan_bbt = nand_default_bbt; #endif diff --git a/drivers/mtd/nand/raw/omap_gpmc.c b/drivers/mtd/nand/raw/omap_gpmc.c index a36e2a148cc..9c704c60e8e 100644 --- a/drivers/mtd/nand/raw/omap_gpmc.c +++ b/drivers/mtd/nand/raw/omap_gpmc.c @@ -1011,7 +1011,7 @@ static int omap_select_ecc_scheme(struct nand_chip *nand, return 0; } -#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_XPL_BUILD /* * omap_nand_switch_ecc - switch the ECC operation between different engines * (h/w and s/w) and different algorithms (hamming and BCHx) @@ -1072,7 +1072,7 @@ int __maybe_unused omap_nand_switch_ecc(uint32_t hardware, uint32_t eccstrength) err = nand_scan_tail(mtd); return err; } -#endif /* CONFIG_SPL_BUILD */ +#endif /* CONFIG_XPL_BUILD */ /* * Board-specific NAND initialization. The following members of the diff --git a/drivers/mtd/nand/raw/sand_nand.c b/drivers/mtd/nand/raw/sand_nand.c index 229d7b5b65a..3678bb8a41b 100644 --- a/drivers/mtd/nand/raw/sand_nand.c +++ b/drivers/mtd/nand/raw/sand_nand.c @@ -601,7 +601,7 @@ static int sand_nand_probe(struct udevice *dev) } nand = &chip->nand; - nand->options = spl_in_proper() ? 0 : NAND_SKIP_BBTSCAN; + nand->options = not_xpl() ? 0 : NAND_SKIP_BBTSCAN; nand->flash_node = np; nand->dev_ready = sand_nand_dev_ready; nand->cmdfunc = sand_nand_command; @@ -680,7 +680,7 @@ void board_nand_init(void) log_info("Failed to get sandbox NAND: %d\n", err); } -#if IS_ENABLED(CONFIG_SPL_BUILD) && IS_ENABLED(CONFIG_SPL_NAND_INIT) +#if IS_ENABLED(CONFIG_XPL_BUILD) && IS_ENABLED(CONFIG_SPL_NAND_INIT) void nand_deselect(void) { nand_chip->select_chip(nand_to_mtd(nand_chip), -1); |