diff options
Diffstat (limited to 'drivers/net/tsec.h')
-rw-r--r-- | drivers/net/tsec.h | 182 |
1 files changed, 91 insertions, 91 deletions
diff --git a/drivers/net/tsec.h b/drivers/net/tsec.h index 597ea1d3c7f..6a2338b46a6 100644 --- a/drivers/net/tsec.h +++ b/drivers/net/tsec.h @@ -36,9 +36,9 @@ #define MAC_ADDR_LEN 6 -/* #define TSEC_TIMEOUT 1000000 */ +/* #define TSEC_TIMEOUT 1000000 */ #define TSEC_TIMEOUT 1000 -#define TOUT_LOOP 1000000 +#define TOUT_LOOP 1000000 #define PHY_AUTONEGOTIATE_TIMEOUT 5000 /* in ms */ @@ -58,12 +58,12 @@ #define MACCFG2_INIT_SETTINGS 0x00007205 #define MACCFG2_FULL_DUPLEX 0x00000001 -#define MACCFG2_IF 0x00000300 +#define MACCFG2_IF 0x00000300 #define MACCFG2_GMII 0x00000200 -#define MACCFG2_MII 0x00000100 +#define MACCFG2_MII 0x00000100 #define ECNTRL_INIT_SETTINGS 0x00001000 -#define ECNTRL_TBI_MODE 0x00000020 +#define ECNTRL_TBI_MODE 0x00000020 #define ECNTRL_R100 0x00000008 #define ECNTRL_SGMII_MODE 0x00000002 @@ -76,21 +76,21 @@ #define MIIMCFG_INIT_VALUE 0x00000003 #define MIIMCFG_RESET 0x80000000 -#define MIIMIND_BUSY 0x00000001 -#define MIIMIND_NOTVALID 0x00000004 +#define MIIMIND_BUSY 0x00000001 +#define MIIMIND_NOTVALID 0x00000004 -#define MIIM_CONTROL 0x00 +#define MIIM_CONTROL 0x00 #define MIIM_CONTROL_RESET 0x00009140 -#define MIIM_CONTROL_INIT 0x00001140 -#define MIIM_CONTROL_RESTART 0x00001340 -#define MIIM_ANEN 0x00001000 +#define MIIM_CONTROL_INIT 0x00001140 +#define MIIM_CONTROL_RESTART 0x00001340 +#define MIIM_ANEN 0x00001000 -#define MIIM_CR 0x00 +#define MIIM_CR 0x00 #define MIIM_CR_RST 0x00008000 -#define MIIM_CR_INIT 0x00001000 +#define MIIM_CR_INIT 0x00001000 #define MIIM_STATUS 0x1 -#define MIIM_STATUS_AN_DONE 0x00000020 +#define MIIM_STATUS_AN_DONE 0x00000020 #define MIIM_STATUS_LINK 0x0004 #define PHY_BMSR_AUTN_ABLE 0x0008 #define PHY_BMSR_AUTN_COMP 0x0020 @@ -120,16 +120,16 @@ #define MIIM_BCM54xx_AUXSTATUS_LINKMODE_SHIFT 8 /* Cicada Auxiliary Control/Status Register */ -#define MIIM_CIS8201_AUX_CONSTAT 0x1c -#define MIIM_CIS8201_AUXCONSTAT_INIT 0x0004 -#define MIIM_CIS8201_AUXCONSTAT_DUPLEX 0x0020 -#define MIIM_CIS8201_AUXCONSTAT_SPEED 0x0018 -#define MIIM_CIS8201_AUXCONSTAT_GBIT 0x0010 -#define MIIM_CIS8201_AUXCONSTAT_100 0x0008 +#define MIIM_CIS8201_AUX_CONSTAT 0x1c +#define MIIM_CIS8201_AUXCONSTAT_INIT 0x0004 +#define MIIM_CIS8201_AUXCONSTAT_DUPLEX 0x0020 +#define MIIM_CIS8201_AUXCONSTAT_SPEED 0x0018 +#define MIIM_CIS8201_AUXCONSTAT_GBIT 0x0010 +#define MIIM_CIS8201_AUXCONSTAT_100 0x0008 /* Cicada Extended Control Register 1 */ -#define MIIM_CIS8201_EXT_CON1 0x17 -#define MIIM_CIS8201_EXTCON1_INIT 0x0000 +#define MIIM_CIS8201_EXT_CON1 0x17 +#define MIIM_CIS8201_EXTCON1_INIT 0x0000 /* Cicada 8204 Extended PHY Control Register 1 */ #define MIIM_CIS8204_EPHY_CON 0x17 @@ -145,21 +145,21 @@ /* Entry for Vitesse VSC8244 regs starts here */ /* Vitesse VSC8244 Auxiliary Control/Status Register */ -#define MIIM_VSC8244_AUX_CONSTAT 0x1c -#define MIIM_VSC8244_AUXCONSTAT_INIT 0x0000 -#define MIIM_VSC8244_AUXCONSTAT_DUPLEX 0x0020 -#define MIIM_VSC8244_AUXCONSTAT_SPEED 0x0018 -#define MIIM_VSC8244_AUXCONSTAT_GBIT 0x0010 -#define MIIM_VSC8244_AUXCONSTAT_100 0x0008 -#define MIIM_CONTROL_INIT_LOOPBACK 0x4000 +#define MIIM_VSC8244_AUX_CONSTAT 0x1c +#define MIIM_VSC8244_AUXCONSTAT_INIT 0x0000 +#define MIIM_VSC8244_AUXCONSTAT_DUPLEX 0x0020 +#define MIIM_VSC8244_AUXCONSTAT_SPEED 0x0018 +#define MIIM_VSC8244_AUXCONSTAT_GBIT 0x0010 +#define MIIM_VSC8244_AUXCONSTAT_100 0x0008 +#define MIIM_CONTROL_INIT_LOOPBACK 0x4000 /* Vitesse VSC8244 Extended PHY Control Register 1 */ -#define MIIM_VSC8244_EPHY_CON 0x17 -#define MIIM_VSC8244_EPHYCON_INIT 0x0006 +#define MIIM_VSC8244_EPHY_CON 0x17 +#define MIIM_VSC8244_EPHYCON_INIT 0x0006 /* Vitesse VSC8244 Serial LED Control Register */ -#define MIIM_VSC8244_LED_CON 0x1b -#define MIIM_VSC8244_LEDCON_INIT 0xF011 +#define MIIM_VSC8244_LED_CON 0x1b +#define MIIM_VSC8244_LEDCON_INIT 0xF011 /* Entry for Vitesse VSC8601 regs starts here (Not complete) */ /* Vitesse VSC8601 Extended PHY Control Register 1 */ @@ -168,11 +168,11 @@ #define MIIM_VSC8601_SKEW_CTRL 0x1c /* 88E1011 PHY Status Register */ -#define MIIM_88E1011_PHY_STATUS 0x11 -#define MIIM_88E1011_PHYSTAT_SPEED 0xc000 -#define MIIM_88E1011_PHYSTAT_GBIT 0x8000 -#define MIIM_88E1011_PHYSTAT_100 0x4000 -#define MIIM_88E1011_PHYSTAT_DUPLEX 0x2000 +#define MIIM_88E1011_PHY_STATUS 0x11 +#define MIIM_88E1011_PHYSTAT_SPEED 0xc000 +#define MIIM_88E1011_PHYSTAT_GBIT 0x8000 +#define MIIM_88E1011_PHYSTAT_100 0x4000 +#define MIIM_88E1011_PHYSTAT_DUPLEX 0x2000 #define MIIM_88E1011_PHYSTAT_SPDDONE 0x0800 #define MIIM_88E1011_PHYSTAT_LINK 0x0400 @@ -189,7 +189,7 @@ #define MIIM_M88E1145_RGMII_RX_DELAY 0x0080 #define MIIM_M88E1145_RGMII_TX_DELAY 0x0002 -#define MIIM_88E1145_PHY_PAGE 29 +#define MIIM_88E1145_PHY_PAGE 29 #define MIIM_88E1145_PHY_CAL_OV 30 /* RTL8211B PHY Status Register */ @@ -220,12 +220,12 @@ #define MIIM_DM9161_10BTCSR_INIT 0x7800 /* LXT971 Status 2 registers */ -#define MIIM_LXT971_SR2 0x11 /* Status Register 2 */ +#define MIIM_LXT971_SR2 0x11 /* Status Register 2 */ #define MIIM_LXT971_SR2_SPEED_MASK 0x4200 -#define MIIM_LXT971_SR2_10HDX 0x0000 /* 10 Mbit half duplex selected */ -#define MIIM_LXT971_SR2_10FDX 0x0200 /* 10 Mbit full duplex selected */ -#define MIIM_LXT971_SR2_100HDX 0x4000 /* 100 Mbit half duplex selected */ -#define MIIM_LXT971_SR2_100FDX 0x4200 /* 100 Mbit full duplex selected */ +#define MIIM_LXT971_SR2_10HDX 0x0000 /* 10 Mbit half duplex selected */ +#define MIIM_LXT971_SR2_10FDX 0x0200 /* 10 Mbit full duplex selected */ +#define MIIM_LXT971_SR2_100HDX 0x4000 /* 100 Mbit half duplex selected */ +#define MIIM_LXT971_SR2_100FDX 0x4200 /* 100 Mbit full duplex selected */ /* DP83865 Control register values */ #define MIIM_DP83865_CR_INIT 0x9200 @@ -237,18 +237,18 @@ #define MIIM_DP83865_SPD_100 0x0008 #define MIIM_DP83865_DPX_FULL 0x0002 -#define MIIM_READ_COMMAND 0x00000001 +#define MIIM_READ_COMMAND 0x00000001 #define MRBLR_INIT_SETTINGS PKTSIZE_ALIGN #define MINFLR_INIT_SETTINGS 0x00000040 -#define DMACTRL_INIT_SETTINGS 0x000000c3 -#define DMACTRL_GRS 0x00000010 -#define DMACTRL_GTS 0x00000008 +#define DMACTRL_INIT_SETTINGS 0x000000c3 +#define DMACTRL_GRS 0x00000010 +#define DMACTRL_GTS 0x00000008 -#define TSTAT_CLEAR_THALT 0x80000000 -#define RSTAT_CLEAR_RHALT 0x00800000 +#define TSTAT_CLEAR_THALT 0x80000000 +#define RSTAT_CLEAR_RHALT 0x00800000 #define IEVENT_INIT_CLEAR 0xffffffff @@ -274,7 +274,7 @@ #define IMASK_INIT_CLEAR 0x00000000 #define IMASK_TXEEN 0x00400000 #define IMASK_TXBEN 0x00200000 -#define IMASK_TXFEN 0x00100000 +#define IMASK_TXFEN 0x00100000 #define IMASK_RXFEN0 0x00000080 @@ -296,7 +296,7 @@ #define TXBD_RETRYLIMIT 0x0040 #define TXBD_RETRYCOUNTMASK 0x003c #define TXBD_UNDERRUN 0x0002 -#define TXBD_STATS 0x03ff +#define TXBD_STATS 0x03ff /* RxBD status field bits */ #define RXBD_EMPTY 0x8000 @@ -318,16 +318,16 @@ typedef struct txbd8 { - ushort status; /* Status Fields */ - ushort length; /* Buffer length */ - uint bufPtr; /* Buffer Pointer */ + ushort status; /* Status Fields */ + ushort length; /* Buffer length */ + uint bufPtr; /* Buffer Pointer */ } txbd8_t; typedef struct rxbd8 { - ushort status; /* Status Fields */ - ushort length; /* Buffer Length */ - uint bufPtr; /* Buffer Pointer */ + ushort status; /* Status Fields */ + ushort length; /* Buffer Length */ + uint bufPtr; /* Buffer Pointer */ } rxbd8_t; typedef struct rmon_mib @@ -431,21 +431,21 @@ typedef struct tsec /* Transmit Control and Status Registers (0x2_n100) */ uint tctrl; /* Transmit Control */ - uint tstat; /* Transmit Status */ + uint tstat; /* Transmit Status */ uint res108; uint tbdlen; /* Tx BD Data Length */ uint res110[5]; - uint ctbptr; /* Current TxBD Pointer */ + uint ctbptr; /* Current TxBD Pointer */ uint res128[23]; uint tbptr; /* TxBD Pointer */ uint res188[30]; /* (0x2_n200) */ - uint res200; + uint res200; uint tbase; /* TxBD Base Address */ uint res208[42]; uint ostbd; /* Out of Sequence TxBD */ uint ostbdp; /* Out of Sequence Tx Data Buffer Pointer */ - uint res2b8[18]; + uint res2b8[18]; /* Receive Control and Status Registers (0x2_n300) */ uint rctrl; /* Receive Control */ @@ -453,17 +453,17 @@ typedef struct tsec uint res308; uint rbdlen; /* RxBD Data Length */ uint res310[4]; - uint res320; - uint crbptr; /* Current Receive Buffer Pointer */ + uint res320; + uint crbptr; /* Current Receive Buffer Pointer */ uint res328[6]; - uint mrblr; /* Maximum Receive Buffer Length */ + uint mrblr; /* Maximum Receive Buffer Length */ uint res344[16]; - uint rbptr; /* RxBD Pointer */ - uint res388[30]; + uint rbptr; /* RxBD Pointer */ + uint res388[30]; /* (0x2_n400) */ - uint res400; - uint rbase; /* RxBD Base Address */ - uint res408[62]; + uint res400; + uint rbase; /* RxBD Base Address */ + uint res408[62]; /* MAC Registers (0x2_n500) */ uint maccfg1; /* MAC Configuration #1 */ @@ -500,12 +500,12 @@ typedef struct tsec /* Hash Function Registers (0x2_n800) */ tsec_hash_t hash; - uint res900[128]; + uint res900[128]; /* Pattern Registers (0x2_nb00) */ - uint resb00[62]; - uint attr; /* Default Attribute Register */ - uint attreli; /* Default Attribute Extract Length and Index */ + uint resb00[62]; + uint attr; /* Default Attribute Register */ + uint attreli; /* Default Attribute Extract Length and Index */ /* TSEC Future Expansion Space (0x2_nc00-0x2_nffc) */ uint resc00[256]; @@ -535,18 +535,18 @@ struct tsec_private { * mii_reg: The register to read or write * * mii_data: For writes, the value to put in the register. - * A value of -1 indicates this is a read. + * A value of -1 indicates this is a read. * * funct: A function pointer which is invoked for each command. - * For reads, this function will be passed the value read + * For reads, this function will be passed the value read * from the PHY, and process it. * For writes, the result of this function will be written * to the PHY register */ struct phy_cmd { - uint mii_reg; - uint mii_data; - uint (*funct) (uint mii_reg, struct tsec_private* priv); + uint mii_reg; + uint mii_data; + uint (*funct) (uint mii_reg, struct tsec_private * priv); }; /* struct phy_info: a structure which defines attributes for a PHY @@ -562,18 +562,18 @@ struct phy_cmd { * commands which tell the driver what to do to the PHY. */ struct phy_info { - uint id; - char *name; - uint shift; - /* Called to configure the PHY, and modify the controller - * based on the results */ - struct phy_cmd *config; - - /* Called when starting up the controller */ - struct phy_cmd *startup; - - /* Called when bringing down the controller */ - struct phy_cmd *shutdown; + uint id; + char *name; + uint shift; + /* Called to configure the PHY, and modify the controller + * based on the results */ + struct phy_cmd *config; + + /* Called when starting up the controller */ + struct phy_cmd *startup; + + /* Called when bringing down the controller */ + struct phy_cmd *shutdown; }; #endif /* __TSEC_H */ |