diff options
Diffstat (limited to 'drivers/net/xilinx_axi_emac.c')
| -rw-r--r-- | drivers/net/xilinx_axi_emac.c | 70 |
1 files changed, 68 insertions, 2 deletions
diff --git a/drivers/net/xilinx_axi_emac.c b/drivers/net/xilinx_axi_emac.c index 5f5bc650bef..3e9919993d0 100644 --- a/drivers/net/xilinx_axi_emac.c +++ b/drivers/net/xilinx_axi_emac.c @@ -109,6 +109,7 @@ struct axidma_plat { struct eth_pdata eth_pdata; struct axidma_reg *dmatx; struct axidma_reg *dmarx; + int pcsaddr; int phyaddr; u8 eth_hasnobuf; int phy_of_handle; @@ -119,6 +120,7 @@ struct axidma_plat { struct axidma_priv { struct axidma_reg *dmatx; struct axidma_reg *dmarx; + int pcsaddr; int phyaddr; struct axi_regs *iobase; phy_interface_t interface; @@ -301,6 +303,13 @@ static int axiemac_phy_init(struct udevice *dev) if (IS_ENABLED(CONFIG_DM_ETH_PHY)) priv->phyaddr = eth_phy_get_addr(dev); + /* + * Set address of PCS/PMA PHY to the one pointed by phy-handle for + * backward compatibility. + */ + if (priv->phyaddr != -1 && priv->pcsaddr == 0) + priv->pcsaddr = priv->phyaddr; + if (priv->phyaddr == -1) { /* Detect the PHY address */ for (i = 31; i >= 0; i--) { @@ -333,6 +342,45 @@ static int axiemac_phy_init(struct udevice *dev) return 0; } +static int pcs_pma_startup(struct axidma_priv *priv) +{ + u32 rc, retry_cnt = 0; + u16 mii_reg; + + rc = phyread(priv, priv->pcsaddr, MII_BMCR, &mii_reg); + if (rc) + goto failed_mdio; + + if (!(mii_reg & BMCR_ANENABLE)) { + mii_reg |= BMCR_ANENABLE; + if (phywrite(priv, priv->pcsaddr, MII_BMCR, mii_reg)) + goto failed_mdio; + } + + /* + * Check the internal PHY status and warn user if the link between it + * and the external PHY is not obtained. + */ + debug("axiemac: waiting for link status of the PCS/PMA PHY"); + while (retry_cnt * 10 < PHY_ANEG_TIMEOUT) { + rc = phyread(priv, priv->pcsaddr, MII_BMSR, &mii_reg); + if ((mii_reg & BMSR_LSTATUS) && mii_reg != 0xffff && !rc) { + debug(".Done\n"); + return 0; + } + if ((retry_cnt++ % 10) == 0) + debug("."); + mdelay(10); + } + debug("\n"); + printf("axiemac: Warning, PCS/PMA PHY@%d is not ready, link is down\n", + priv->pcsaddr); + return 1; +failed_mdio: + printf("axiemac: MDIO to the PCS/PMA PHY has failed\n"); + return 1; +} + /* Setting axi emac and phy to proper setting */ static int setup_phy(struct udevice *dev) { @@ -348,12 +396,12 @@ static int setup_phy(struct udevice *dev) * after DMA and ethernet resets and hence * check and clear if set. */ - ret = phyread(priv, priv->phyaddr, MII_BMCR, &temp); + ret = phyread(priv, priv->pcsaddr, MII_BMCR, &temp); if (ret) return 0; if (temp & BMCR_ISOLATE) { temp &= ~BMCR_ISOLATE; - ret = phywrite(priv, priv->phyaddr, MII_BMCR, temp); + ret = phywrite(priv, priv->pcsaddr, MII_BMCR, temp); if (ret) return 0; } @@ -364,6 +412,11 @@ static int setup_phy(struct udevice *dev) phydev->dev->name); return 0; } + if (priv->interface == PHY_INTERFACE_MODE_SGMII || + priv->interface == PHY_INTERFACE_MODE_1000BASEX) { + if (pcs_pma_startup(priv)) + return 0; + } if (!phydev->link) { printf("%s: No link.\n", phydev->dev->name); return 0; @@ -784,6 +837,7 @@ static int axi_emac_probe(struct udevice *dev) if (priv->mactype == EMAC_1G) { priv->eth_hasnobuf = plat->eth_hasnobuf; + priv->pcsaddr = plat->pcsaddr; priv->phyaddr = plat->phyaddr; priv->phy_of_handle = plat->phy_of_handle; priv->interface = pdata->phy_interface; @@ -861,6 +915,8 @@ static int axi_emac_of_to_plat(struct udevice *dev) if (plat->mactype == EMAC_1G) { plat->phyaddr = -1; + /* PHYAD 0 always redirects to the PCS/PMA PHY */ + plat->pcsaddr = 0; offset = fdtdec_lookup_phandle(gd->fdt_blob, node, "phy-handle"); @@ -878,6 +934,16 @@ static int axi_emac_of_to_plat(struct udevice *dev) plat->eth_hasnobuf = fdtdec_get_bool(gd->fdt_blob, node, "xlnx,eth-hasnobuf"); + + if (pdata->phy_interface == PHY_INTERFACE_MODE_SGMII || + pdata->phy_interface == PHY_INTERFACE_MODE_1000BASEX) { + offset = fdtdec_lookup_phandle(gd->fdt_blob, node, + "pcs-handle"); + if (offset > 0) { + plat->pcsaddr = fdtdec_get_int(gd->fdt_blob, + offset, "reg", -1); + } + } } return 0; |