diff options
Diffstat (limited to 'drivers/pci/Kconfig')
| -rw-r--r-- | drivers/pci/Kconfig | 30 |
1 files changed, 30 insertions, 0 deletions
diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig index fd2203420c3..436acca898e 100644 --- a/drivers/pci/Kconfig +++ b/drivers/pci/Kconfig @@ -48,6 +48,10 @@ config PCI_REGION_MULTI_ENTRY region type. This helps to add support for SoC's like OcteonTX/TX2 where every peripheral is on the PCI bus. +config PCI_CONFIG_HOST_BRIDGE + bool "Configure PCI host bridges" + default y if X86 + config PCI_MAP_SYSTEM_MEMORY bool "Map local system memory from a virtual base address" depends on MIPS @@ -81,6 +85,10 @@ config PCI_ARID support on PCI devices. This helps to skip some devices in BDF scan that are not present. +config PCI_SCAN_SHOW + bool "Show PCI devices during startup" + depends on PCIE_IMX + config PCIE_ECAM_GENERIC bool "Generic ECAM-based PCI host controller support" help @@ -97,6 +105,10 @@ config PCIE_ECAM_SYNQUACER Note that this must be configured when boot because Linux driver expects the PCIe RC has been configured in the bootloader. +config PCI_GT64120 + bool "GT64120 PCI support" + depends on MIPS + config PCI_PHYTIUM bool "Phytium PCIe support" help @@ -121,8 +133,12 @@ config PCIE_DW_SIFIVE Say Y here if you want to enable PCIe controller support on FU740. +config SYS_FSL_PCI_VER_3_X + bool + config PCIE_FSL bool "FSL PowerPC PCIe support" + select SYS_FSL_PCI_VER_3_X if ARCH_T2080 || ARCH_T4240 help Say Y here if you want to enable PCIe controller support on FSL PowerPC MPC85xx, MPC86xx, B series, P series and T series SoCs. @@ -134,6 +150,10 @@ config PCI_MPC85XX Say Y here if you want to enable PCI controller support on FSL PowerPC MPC85xx SoC. +config PCI_MSC01 + bool "MSC01 PCI support" + depends on TARGET_MALTA + config PCI_RCAR_GEN2 bool "Renesas RCar Gen2 PCIe driver" depends on RCAR_32 @@ -159,6 +179,12 @@ config PCI_SANDBOX the device tree but the normal PCI scan technique is used to find then. +config SH7751_PCI + bool "SH7751 PCI controller support" + depends on SH + help + SuperH PCI Bridge Configuration + config PCI_TEGRA bool "Tegra PCI support" depends on ARCH_TEGRA @@ -254,6 +280,10 @@ config FSL_PCIE_EP_COMPAT This compatible is used to find pci controller ep node in Kernel DT to complete fixup. +config PCIE_IMX + bool "i.MX PCIe support" + depends on ARCH_MX6 + config PCIE_INTEL_FPGA bool "Intel FPGA PCIe support" help |