diff options
Diffstat (limited to 'drivers/pci/pcie_imx.c')
| -rw-r--r-- | drivers/pci/pcie_imx.c | 12 |
1 files changed, 6 insertions, 6 deletions
diff --git a/drivers/pci/pcie_imx.c b/drivers/pci/pcie_imx.c index 46ac01713ff..902507aaae3 100644 --- a/drivers/pci/pcie_imx.c +++ b/drivers/pci/pcie_imx.c @@ -566,7 +566,7 @@ int imx6_pcie_toggle_reset(struct gpio_desc *gpio, bool active_high) * do self-initialisation. * * In case your #PERST pin is connected to a plain GPIO pin of the - * CPU, you can define CONFIG_PCIE_IMX_PERST_GPIO in your board's + * CPU, you can define CFG_PCIE_IMX_PERST_GPIO in your board's * configuration file and the condition below will handle the rest * of the reset toggling. * @@ -578,13 +578,13 @@ int imx6_pcie_toggle_reset(struct gpio_desc *gpio, bool active_high) * Linux at all in the first place since it's in some non-reset * state due to being previously used in U-Boot. */ -#ifdef CONFIG_PCIE_IMX_PERST_GPIO - gpio_request(CONFIG_PCIE_IMX_PERST_GPIO, "pcie_reset"); - gpio_direction_output(CONFIG_PCIE_IMX_PERST_GPIO, 0); +#ifdef CFG_PCIE_IMX_PERST_GPIO + gpio_request(CFG_PCIE_IMX_PERST_GPIO, "pcie_reset"); + gpio_direction_output(CFG_PCIE_IMX_PERST_GPIO, 0); mdelay(20); - gpio_set_value(CONFIG_PCIE_IMX_PERST_GPIO, 1); + gpio_set_value(CFG_PCIE_IMX_PERST_GPIO, 1); mdelay(20); - gpio_free(CONFIG_PCIE_IMX_PERST_GPIO); + gpio_free(CFG_PCIE_IMX_PERST_GPIO); #else if (dm_gpio_is_valid(gpio)) { /* Assert PERST# for 20ms then de-assert */ |