1 files changed, 0 insertions, 134 deletions
diff --git a/drivers/power/axp313.c b/drivers/power/axp313.c
deleted file mode 100644
index bbc9e911115..00000000000
--- a/drivers/power/axp313.c
+++ /dev/null
@@ -1,134 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * AXP313(a) driver
- *
- * (C) Copyright 2023 Arm Ltd.
- *
- * Based on axp305.c
- * (C) Copyright 2020 Jernej Skrabec <jernej.skrabec@siol.net>
- * (C) Copyright 2014 Hans de Goede <hdegoede@redhat.com>
- * (C) Copyright 2013 Oliver Schinagl <oliver@schinagl.nl>
- */
-
-#include <common.h>
-#include <command.h>
-#include <errno.h>
-#include <asm/arch/pmic_bus.h>
-#include <axp_pmic.h>
-
-enum axp313_reg {
-	AXP313_CHIP_VERSION	= 0x03,
-	AXP313_OUTPUT_CTRL	= 0x10,
-	AXP313_DCDC1_CTRL	= 0x13,
-	AXP313_SHUTDOWN		= 0x1a,
-};
-
-#define AXP313_CHIP_VERSION_MASK	0xcf
-#define AXP313_CHIP_VERSION_AXP1530	0x48
-#define AXP313_CHIP_VERSION_AXP313A	0x4b
-#define AXP313_CHIP_VERSION_AXP313B	0x4c
-
-#define AXP313_DCDC_SPLIT_OFFSET	71
-#define AXP313_DCDC_SPLIT_MVOLT		1200
-
-#define AXP313_POWEROFF			BIT(7)
-
-static u8 mvolt_to_cfg(int mvolt, int min, int max, int div)
-{
-	if (mvolt < min)
-		mvolt = min;
-	else if (mvolt > max)
-		mvolt = max;
-
-	return (mvolt - min) / div;
-}
-
-static int axp_set_dcdc(int dcdc_num, unsigned int mvolt)
-{
-	int ret;
-	u8 cfg, enable_mask = 1U << (dcdc_num - 1);
-	int volt_reg = AXP313_DCDC1_CTRL + dcdc_num - 1;
-	int max_mV;
-
-	switch (dcdc_num) {
-	case 1:
-	case 2:
-		max_mV	= 1540;
-		break;
-	case 3:
-		/*
-		 * The manual defines a different split point, but tests
-		 * show that it's the same 1200mV as for DCDC1/2.
-		 */
-		max_mV	= 1840;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	if (mvolt > AXP313_DCDC_SPLIT_MVOLT)
-		cfg = AXP313_DCDC_SPLIT_OFFSET + mvolt_to_cfg(mvolt,
-				AXP313_DCDC_SPLIT_MVOLT + 20, max_mV, 20);
-	else
-		cfg = mvolt_to_cfg(mvolt, 500, AXP313_DCDC_SPLIT_MVOLT, 10);
-
-	if (mvolt == 0)
-		return pmic_bus_clrbits(AXP313_OUTPUT_CTRL, enable_mask);
-
-	debug("DCDC%d: writing 0x%x to reg 0x%x\n", dcdc_num, cfg, volt_reg);
-	ret = pmic_bus_write(volt_reg, cfg);
-	if (ret)
-		return ret;
-
-	return pmic_bus_setbits(AXP313_OUTPUT_CTRL, enable_mask);
-}
-
-int axp_set_dcdc2(unsigned int mvolt)
-{
-	return axp_set_dcdc(2, mvolt);
-}
-
-int axp_set_dcdc3(unsigned int mvolt)
-{
-	return axp_set_dcdc(3, mvolt);
-}
-
-int axp_init(void)
-{
-	u8 axp_chip_id;
-	int ret;
-
-	ret = pmic_bus_init();
-	if (ret)
-		return ret;
-
-	ret = pmic_bus_read(AXP313_CHIP_VERSION, &axp_chip_id);
-	if (ret)
-		return ret;
-
-	axp_chip_id &= AXP313_CHIP_VERSION_MASK;
-	switch (axp_chip_id) {
-	case AXP313_CHIP_VERSION_AXP1530:
-	case AXP313_CHIP_VERSION_AXP313A:
-	case AXP313_CHIP_VERSION_AXP313B:
-		break;
-	default:
-		debug("unknown PMIC: 0x%x\n", axp_chip_id);
-		return -EINVAL;
-	}
-
-	return ret;
-}
-
-#if !CONFIG_IS_ENABLED(ARM_PSCI_FW) && !IS_ENABLED(CONFIG_SYSRESET_CMD_POWEROFF)
-int do_poweroff(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[])
-{
-	pmic_bus_write(AXP313_SHUTDOWN, AXP313_POWEROFF);
-
-	/* infinite loop during shutdown */
-	while (1) {}
-
-	/* not reached */
-	return 0;
-}
-#endif