diff options
Diffstat (limited to 'drivers/qe/uccf.c')
-rw-r--r-- | drivers/qe/uccf.c | 509 |
1 files changed, 0 insertions, 509 deletions
diff --git a/drivers/qe/uccf.c b/drivers/qe/uccf.c deleted file mode 100644 index d5d734439cf..00000000000 --- a/drivers/qe/uccf.c +++ /dev/null @@ -1,509 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright (C) 2006 Freescale Semiconductor, Inc. - * - * Dave Liu <daveliu@freescale.com> - * based on source code of Shlomi Gridish - */ - -#include <common.h> -#include <malloc.h> -#include <linux/errno.h> -#include <asm/io.h> -#include <linux/immap_qe.h> -#include "uccf.h" -#include <fsl_qe.h> - -#if !defined(CONFIG_DM_ETH) -void ucc_fast_transmit_on_demand(struct ucc_fast_priv *uccf) -{ - out_be16(&uccf->uf_regs->utodr, UCC_FAST_TOD); -} - -u32 ucc_fast_get_qe_cr_subblock(int ucc_num) -{ - switch (ucc_num) { - case 0: - return QE_CR_SUBBLOCK_UCCFAST1; - case 1: - return QE_CR_SUBBLOCK_UCCFAST2; - case 2: - return QE_CR_SUBBLOCK_UCCFAST3; - case 3: - return QE_CR_SUBBLOCK_UCCFAST4; - case 4: - return QE_CR_SUBBLOCK_UCCFAST5; - case 5: - return QE_CR_SUBBLOCK_UCCFAST6; - case 6: - return QE_CR_SUBBLOCK_UCCFAST7; - case 7: - return QE_CR_SUBBLOCK_UCCFAST8; - default: - return QE_CR_SUBBLOCK_INVALID; - } -} - -static void ucc_get_cmxucr_reg(int ucc_num, u32 **p_cmxucr, - u8 *reg_num, u8 *shift) -{ - switch (ucc_num) { - case 0: /* UCC1 */ - *p_cmxucr = &qe_immr->qmx.cmxucr1; - *reg_num = 1; - *shift = 16; - break; - case 2: /* UCC3 */ - *p_cmxucr = &qe_immr->qmx.cmxucr1; - *reg_num = 1; - *shift = 0; - break; - case 4: /* UCC5 */ - *p_cmxucr = &qe_immr->qmx.cmxucr2; - *reg_num = 2; - *shift = 16; - break; - case 6: /* UCC7 */ - *p_cmxucr = &qe_immr->qmx.cmxucr2; - *reg_num = 2; - *shift = 0; - break; - case 1: /* UCC2 */ - *p_cmxucr = &qe_immr->qmx.cmxucr3; - *reg_num = 3; - *shift = 16; - break; - case 3: /* UCC4 */ - *p_cmxucr = &qe_immr->qmx.cmxucr3; - *reg_num = 3; - *shift = 0; - break; - case 5: /* UCC6 */ - *p_cmxucr = &qe_immr->qmx.cmxucr4; - *reg_num = 4; - *shift = 16; - break; - case 7: /* UCC8 */ - *p_cmxucr = &qe_immr->qmx.cmxucr4; - *reg_num = 4; - *shift = 0; - break; - default: - break; - } -} - -static int ucc_set_clk_src(int ucc_num, qe_clock_e clock, comm_dir_e mode) -{ - u32 *p_cmxucr = NULL; - u8 reg_num = 0; - u8 shift = 0; - u32 clk_bits; - u32 clk_mask; - int source = -1; - - /* check if the UCC number is in range. */ - if ((ucc_num > UCC_MAX_NUM - 1) || ucc_num < 0) - return -EINVAL; - - if (!(mode == COMM_DIR_RX || mode == COMM_DIR_TX)) { - printf("%s: bad comm mode type passed\n", __func__); - return -EINVAL; - } - - ucc_get_cmxucr_reg(ucc_num, &p_cmxucr, ®_num, &shift); - - switch (reg_num) { - case 1: - switch (clock) { - case QE_BRG1: - source = 1; - break; - case QE_BRG2: - source = 2; - break; - case QE_BRG7: - source = 3; - break; - case QE_BRG8: - source = 4; - break; - case QE_CLK9: - source = 5; - break; - case QE_CLK10: - source = 6; - break; - case QE_CLK11: - source = 7; - break; - case QE_CLK12: - source = 8; - break; - case QE_CLK15: - source = 9; - break; - case QE_CLK16: - source = 10; - break; - default: - source = -1; - break; - } - break; - case 2: - switch (clock) { - case QE_BRG5: - source = 1; - break; - case QE_BRG6: - source = 2; - break; - case QE_BRG7: - source = 3; - break; - case QE_BRG8: - source = 4; - break; - case QE_CLK13: - source = 5; - break; - case QE_CLK14: - source = 6; - break; - case QE_CLK19: - source = 7; - break; - case QE_CLK20: - source = 8; - break; - case QE_CLK15: - source = 9; - break; - case QE_CLK16: - source = 10; - break; - default: - source = -1; - break; - } - break; - case 3: - switch (clock) { - case QE_BRG9: - source = 1; - break; - case QE_BRG10: - source = 2; - break; - case QE_BRG15: - source = 3; - break; - case QE_BRG16: - source = 4; - break; - case QE_CLK3: - source = 5; - break; - case QE_CLK4: - source = 6; - break; - case QE_CLK17: - source = 7; - break; - case QE_CLK18: - source = 8; - break; - case QE_CLK7: - source = 9; - break; - case QE_CLK8: - source = 10; - break; - case QE_CLK16: - source = 11; - break; - default: - source = -1; - break; - } - break; - case 4: - switch (clock) { - case QE_BRG13: - source = 1; - break; - case QE_BRG14: - source = 2; - break; - case QE_BRG15: - source = 3; - break; - case QE_BRG16: - source = 4; - break; - case QE_CLK5: - source = 5; - break; - case QE_CLK6: - source = 6; - break; - case QE_CLK21: - source = 7; - break; - case QE_CLK22: - source = 8; - break; - case QE_CLK7: - source = 9; - break; - case QE_CLK8: - source = 10; - break; - case QE_CLK16: - source = 11; - break; - default: - source = -1; - break; - } - break; - default: - source = -1; - break; - } - - if (source == -1) { - printf("%s: Bad combination of clock and UCC\n", __func__); - return -ENOENT; - } - - clk_bits = (u32)source; - clk_mask = QE_CMXUCR_TX_CLK_SRC_MASK; - if (mode == COMM_DIR_RX) { - clk_bits <<= 4; /* Rx field is 4 bits to left of Tx field */ - clk_mask <<= 4; /* Rx field is 4 bits to left of Tx field */ - } - clk_bits <<= shift; - clk_mask <<= shift; - - out_be32(p_cmxucr, (in_be32(p_cmxucr) & ~clk_mask) | clk_bits); - - return 0; -} - -static uint ucc_get_reg_baseaddr(int ucc_num) -{ - uint base = 0; - - /* check if the UCC number is in range */ - if ((ucc_num > UCC_MAX_NUM - 1) || ucc_num < 0) { - printf("%s: the UCC num not in ranges\n", __func__); - return 0; - } - - switch (ucc_num) { - case 0: - base = 0x00002000; - break; - case 1: - base = 0x00003000; - break; - case 2: - base = 0x00002200; - break; - case 3: - base = 0x00003200; - break; - case 4: - base = 0x00002400; - break; - case 5: - base = 0x00003400; - break; - case 6: - base = 0x00002600; - break; - case 7: - base = 0x00003600; - break; - default: - break; - } - - base = (uint)qe_immr + base; - return base; -} - -void ucc_fast_enable(struct ucc_fast_priv *uccf, comm_dir_e mode) -{ - ucc_fast_t *uf_regs; - u32 gumr; - - uf_regs = uccf->uf_regs; - - /* Enable reception and/or transmission on this UCC. */ - gumr = in_be32(&uf_regs->gumr); - if (mode & COMM_DIR_TX) { - gumr |= UCC_FAST_GUMR_ENT; - uccf->enabled_tx = 1; - } - if (mode & COMM_DIR_RX) { - gumr |= UCC_FAST_GUMR_ENR; - uccf->enabled_rx = 1; - } - out_be32(&uf_regs->gumr, gumr); -} - -void ucc_fast_disable(struct ucc_fast_priv *uccf, comm_dir_e mode) -{ - ucc_fast_t *uf_regs; - u32 gumr; - - uf_regs = uccf->uf_regs; - - /* Disable reception and/or transmission on this UCC. */ - gumr = in_be32(&uf_regs->gumr); - if (mode & COMM_DIR_TX) { - gumr &= ~UCC_FAST_GUMR_ENT; - uccf->enabled_tx = 0; - } - if (mode & COMM_DIR_RX) { - gumr &= ~UCC_FAST_GUMR_ENR; - uccf->enabled_rx = 0; - } - out_be32(&uf_regs->gumr, gumr); -} - -int ucc_fast_init(struct ucc_fast_inf *uf_info, - struct ucc_fast_priv **uccf_ret) -{ - struct ucc_fast_priv *uccf; - ucc_fast_t *uf_regs; - - if (!uf_info) - return -EINVAL; - - if (uf_info->ucc_num < 0 || (uf_info->ucc_num > UCC_MAX_NUM - 1)) { - printf("%s: Illagal UCC number!\n", __func__); - return -EINVAL; - } - - uccf = (struct ucc_fast_priv *)malloc(sizeof(struct ucc_fast_priv)); - if (!uccf) { - printf("%s: No memory for UCC fast data structure!\n", - __func__); - return -ENOMEM; - } - memset(uccf, 0, sizeof(struct ucc_fast_priv)); - - /* Save fast UCC structure */ - uccf->uf_info = uf_info; - uccf->uf_regs = (ucc_fast_t *)ucc_get_reg_baseaddr(uf_info->ucc_num); - - if (!uccf->uf_regs) { - printf("%s: No memory map for UCC fast controller!\n", - __func__); - return -ENOMEM; - } - - uccf->enabled_tx = 0; - uccf->enabled_rx = 0; - - uf_regs = uccf->uf_regs; - uccf->p_ucce = (u32 *)&uf_regs->ucce; - uccf->p_uccm = (u32 *)&uf_regs->uccm; - - /* Init GUEMR register, UCC both Rx and Tx is Fast protocol */ - out_8(&uf_regs->guemr, UCC_GUEMR_SET_RESERVED3 | UCC_GUEMR_MODE_FAST_RX - | UCC_GUEMR_MODE_FAST_TX); - - /* Set GUMR, disable UCC both Rx and Tx, Ethernet protocol */ - out_be32(&uf_regs->gumr, UCC_FAST_GUMR_ETH); - - /* Set the Giga ethernet VFIFO stuff */ - if (uf_info->eth_type == GIGA_ETH) { - /* Allocate memory for Tx Virtual Fifo */ - uccf->ucc_fast_tx_virtual_fifo_base_offset = - qe_muram_alloc(UCC_GETH_UTFS_GIGA_INIT, - UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT); - - /* Allocate memory for Rx Virtual Fifo */ - uccf->ucc_fast_rx_virtual_fifo_base_offset = - qe_muram_alloc(UCC_GETH_URFS_GIGA_INIT + - UCC_FAST_RX_VIRTUAL_FIFO_SIZE_PAD, - UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT); - - /* utfb, urfb are offsets from MURAM base */ - out_be32(&uf_regs->utfb, - uccf->ucc_fast_tx_virtual_fifo_base_offset); - out_be32(&uf_regs->urfb, - uccf->ucc_fast_rx_virtual_fifo_base_offset); - - /* Set Virtual Fifo registers */ - out_be16(&uf_regs->urfs, UCC_GETH_URFS_GIGA_INIT); - out_be16(&uf_regs->urfet, UCC_GETH_URFET_GIGA_INIT); - out_be16(&uf_regs->urfset, UCC_GETH_URFSET_GIGA_INIT); - out_be16(&uf_regs->utfs, UCC_GETH_UTFS_GIGA_INIT); - out_be16(&uf_regs->utfet, UCC_GETH_UTFET_GIGA_INIT); - out_be16(&uf_regs->utftt, UCC_GETH_UTFTT_GIGA_INIT); - } - - /* Set the Fast ethernet VFIFO stuff */ - if (uf_info->eth_type == FAST_ETH) { - /* Allocate memory for Tx Virtual Fifo */ - uccf->ucc_fast_tx_virtual_fifo_base_offset = - qe_muram_alloc(UCC_GETH_UTFS_INIT, - UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT); - - /* Allocate memory for Rx Virtual Fifo */ - uccf->ucc_fast_rx_virtual_fifo_base_offset = - qe_muram_alloc(UCC_GETH_URFS_INIT + - UCC_FAST_RX_VIRTUAL_FIFO_SIZE_PAD, - UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT); - - /* utfb, urfb are offsets from MURAM base */ - out_be32(&uf_regs->utfb, - uccf->ucc_fast_tx_virtual_fifo_base_offset); - out_be32(&uf_regs->urfb, - uccf->ucc_fast_rx_virtual_fifo_base_offset); - - /* Set Virtual Fifo registers */ - out_be16(&uf_regs->urfs, UCC_GETH_URFS_INIT); - out_be16(&uf_regs->urfet, UCC_GETH_URFET_INIT); - out_be16(&uf_regs->urfset, UCC_GETH_URFSET_INIT); - out_be16(&uf_regs->utfs, UCC_GETH_UTFS_INIT); - out_be16(&uf_regs->utfet, UCC_GETH_UTFET_INIT); - out_be16(&uf_regs->utftt, UCC_GETH_UTFTT_INIT); - } - - /* Rx clock routing */ - if (uf_info->rx_clock != QE_CLK_NONE) { - if (ucc_set_clk_src(uf_info->ucc_num, - uf_info->rx_clock, COMM_DIR_RX)) { - printf("%s: Illegal value for parameter 'RxClock'.\n", - __func__); - return -EINVAL; - } - } - - /* Tx clock routing */ - if (uf_info->tx_clock != QE_CLK_NONE) { - if (ucc_set_clk_src(uf_info->ucc_num, - uf_info->tx_clock, COMM_DIR_TX)) { - printf("%s: Illegal value for parameter 'TxClock'.\n", - __func__); - return -EINVAL; - } - } - - /* Clear interrupt mask register to disable all of interrupts */ - out_be32(&uf_regs->uccm, 0x0); - - /* Writing '1' to clear all of envents */ - out_be32(&uf_regs->ucce, 0xffffffff); - - *uccf_ret = uccf; - return 0; -} -#endif |