1 files changed, 266 insertions, 0 deletions
diff --git a/drivers/remoteproc/renesas_apmu.c b/drivers/remoteproc/renesas_apmu.c
new file mode 100644
index 00000000000..32d138e6487
--- /dev/null
+++ b/drivers/remoteproc/renesas_apmu.c
@@ -0,0 +1,266 @@
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+/*
+ * Copyright (C) 2024 Renesas Electronics Corp.
+ */
+
+#include <asm/io.h>
+#include <dm.h>
+#include <dm/device-internal.h>
+#include <dm/lists.h>
+#include <errno.h>
+#include <hang.h>
+#include <linux/iopoll.h>
+#include <linux/sizes.h>
+#include <malloc.h>
+#include <remoteproc.h>
+
+/* R-Car V4H/V4M contain 3 clusters / 3 cores */
+#define RCAR4_CR52_CORES		3
+
+/* Reset Control Register for Cortex-R52 #n */
+#define APMU_CRRSTCTRL(n)		(0x304 + ((n) * 0x40))
+#define APMU_CRRSTCTRL_CR52RST		BIT(0)
+
+/* Base Address Register for Cortex-R52 #n */
+#define APMU_CRBARP(n)			(0x33c + ((n) * 0x40))
+#define APMU_CRBARP_CR_VLD_BARP		BIT(0)
+#define APMU_CRBARP_CR_BAREN_VALID	BIT(4)
+#define APMU_CRBARP_CR_RBAR_MASK	0xfffc0000
+#define APMU_CRBARP_CR_RBAR_ALIGN	0x40000
+
+/**
+ * struct renesas_apmu_rproc_privdata - remote processor private data
+ * @regs:		controller registers
+ * @core_id:		CPU core id
+ * @trampoline:		jump trampoline code
+ */
+struct renesas_apmu_rproc_privdata {
+	void __iomem	*regs;
+	ulong		core_id;
+	u32		*trampoline;
+};
+
+/*
+ * CRBARP address is aligned to 0x40000 / 256 kiB , this trampoline
+ * allows arbitrary address alignment at instruction granularity.
+ */
+static const u32 renesas_apmu_rproc_trampoline[4] = {
+	0xe59f0004,	/* ldr r0, [pc, #4] */
+	0xe1a0f000,	/* mov pc, r0 */
+	0xeafffffe,	/* 1: b 1b */
+	0xabcd1234	/* jump target (rewritten on load) */
+};
+
+/**
+ * renesas_apmu_rproc_load() - Load the remote processor
+ * @dev:	corresponding remote processor device
+ * @addr:	Address in memory where image is stored
+ * @size:	Size in bytes of the image
+ *
+ * Return: 0 if all went ok, else corresponding -ve error
+ */
+static int renesas_apmu_rproc_load(struct udevice *dev, ulong addr, ulong size)
+{
+	struct renesas_apmu_rproc_privdata *priv = dev_get_priv(dev);
+	u32 trampolineaddr = (u32)(uintptr_t)(priv->trampoline);
+
+	priv->trampoline[3] = addr;
+	flush_dcache_range(trampolineaddr,
+			   trampolineaddr +
+			   sizeof(renesas_apmu_rproc_trampoline));
+
+	/* CR52 boot address set */
+	writel(trampolineaddr | APMU_CRBARP_CR_VLD_BARP,
+	       priv->regs + APMU_CRBARP(priv->core_id));
+	writel(trampolineaddr | APMU_CRBARP_CR_VLD_BARP | APMU_CRBARP_CR_BAREN_VALID,
+	       priv->regs + APMU_CRBARP(priv->core_id));
+
+	return 0;
+}
+
+/**
+ * renesas_apmu_rproc_start() - Start the remote processor
+ * @dev:	corresponding remote processor device
+ *
+ * Return: 0 if all went ok, else corresponding -ve error
+ */
+static int renesas_apmu_rproc_start(struct udevice *dev)
+{
+	struct renesas_apmu_rproc_privdata *priv = dev_get_priv(dev);
+
+	/* Clear APMU_CRRSTCTRL_CR52RST, the only bit in this register */
+	writel(0, priv->regs + APMU_CRRSTCTRL(priv->core_id));
+
+	return 0;
+}
+
+/**
+ * renesas_apmu_rproc_stop() - Stop the remote processor
+ * @dev:	corresponding remote processor device
+ *
+ * Return: 0 if all went ok, else corresponding -ve error
+ */
+static int renesas_apmu_rproc_stop(struct udevice *dev)
+{
+	struct renesas_apmu_rproc_privdata *priv = dev_get_priv(dev);
+
+	/* Set APMU_CRRSTCTRL_CR52RST, the only bit in this register */
+	writel(APMU_CRRSTCTRL_CR52RST,
+	       priv->regs + APMU_CRRSTCTRL(priv->core_id));
+
+	return 0;
+}
+
+/**
+ * renesas_apmu_rproc_reset() - Reset the remote processor
+ * @dev:	corresponding remote processor device
+ *
+ * Return: 0 if all went ok, else corresponding -ve error
+ */
+static int renesas_apmu_rproc_reset(struct udevice *dev)
+{
+	renesas_apmu_rproc_stop(dev);
+	renesas_apmu_rproc_start(dev);
+	return 0;
+}
+
+/**
+ * renesas_apmu_rproc_is_running() - Is the remote processor running
+ * @dev:	corresponding remote processor device
+ *
+ * Return: 0 if the remote processor is running, 1 otherwise
+ */
+static int renesas_apmu_rproc_is_running(struct udevice *dev)
+{
+	struct renesas_apmu_rproc_privdata *priv = dev_get_priv(dev);
+
+	return readl(priv->regs + APMU_CRRSTCTRL(priv->core_id)) &
+	       APMU_CRRSTCTRL_CR52RST;
+}
+
+/**
+ * renesas_apmu_rproc_init() - Initialize the remote processor CRBAR registers
+ * @dev:	corresponding remote processor device
+ *
+ * Return: 0 if all went ok, else corresponding -ve error
+ */
+static int renesas_apmu_rproc_init(struct udevice *dev)
+{
+	struct renesas_apmu_rproc_privdata *priv = dev_get_priv(dev);
+
+	/* If the core is running already, do nothing. */
+	if (renesas_apmu_rproc_is_running(dev))
+		return 0;
+
+	/* Clear and invalidate CRBARP content */
+	writel(0, priv->regs + APMU_CRBARP(priv->core_id));
+
+	return 0;
+}
+
+/**
+ * renesas_apmu_rproc_device_to_virt() - Convert device address to virtual address
+ * @dev:	corresponding remote processor device
+ * @da:		device address
+ * @size:	Size of the memory region @da is pointing to
+ *
+ * Return: converted virtual address
+ */
+static void *renesas_apmu_rproc_device_to_virt(struct udevice *dev, ulong da,
+					       ulong size)
+{
+	/*
+	 * The Cortex R52 and A76 share the same address space,
+	 * this operation is a no-op.
+	 */
+	return (void *)da;
+}
+
+static const struct dm_rproc_ops renesas_apmu_rproc_ops = {
+	.init		= renesas_apmu_rproc_init,
+	.load		= renesas_apmu_rproc_load,
+	.start		= renesas_apmu_rproc_start,
+	.stop		= renesas_apmu_rproc_stop,
+	.reset		= renesas_apmu_rproc_reset,
+	.is_running	= renesas_apmu_rproc_is_running,
+	.device_to_virt	= renesas_apmu_rproc_device_to_virt,
+};
+
+/**
+ * renesas_apmu_rproc_of_to_plat() - Convert OF data to platform data
+ * @dev:	corresponding remote processor device
+ *
+ * Return: 0 if all went ok, else corresponding -ve error
+ */
+static int renesas_apmu_rproc_of_to_plat(struct udevice *dev)
+{
+	struct renesas_apmu_rproc_privdata *priv = dev_get_priv(dev);
+
+	priv->core_id = dev_get_driver_data(dev);
+
+	priv->regs = dev_read_addr_ptr(dev);
+	if (!priv->regs)
+		return -EINVAL;
+
+	priv->trampoline = memalign(APMU_CRBARP_CR_RBAR_ALIGN,
+				    sizeof(renesas_apmu_rproc_trampoline));
+	if (!priv->trampoline)
+		return -ENOMEM;
+
+	memcpy(priv->trampoline, renesas_apmu_rproc_trampoline,
+	       sizeof(renesas_apmu_rproc_trampoline));
+
+	return 0;
+}
+
+U_BOOT_DRIVER(renesas_apmu_cr52) = {
+	.name		= "rcar-apmu-cr52",
+	.id		= UCLASS_REMOTEPROC,
+	.ops		= &renesas_apmu_rproc_ops,
+	.of_to_plat	= renesas_apmu_rproc_of_to_plat,
+	.priv_auto	= sizeof(struct renesas_apmu_rproc_privdata),
+};
+
+/**
+ * renesas_apmu_rproc_bind() - Bind rproc driver to each core control
+ * @dev:	corresponding remote processor parent device
+ *
+ * Return: 0 if all went ok, else corresponding -ve error
+ */
+static int renesas_apmu_rproc_bind(struct udevice *parent)
+{
+	const ulong cr52cores = RCAR4_CR52_CORES;
+	ofnode pnode = dev_ofnode(parent);
+	struct udevice *cdev;
+	struct driver *cdrv;
+	char name[32];
+	ulong i;
+	int ret;
+
+	cdrv = lists_driver_lookup_name("rcar-apmu-cr52");
+	if (!cdrv)
+		return -ENOENT;
+
+	for (i = 0; i < cr52cores; i++) {
+		snprintf(name, sizeof(name), "rcar-apmu-cr52.%ld", i);
+		ret = device_bind_with_driver_data(parent, cdrv, strdup(name),
+						   i, pnode, &cdev);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+static const struct udevice_id renesas_apmu_rproc_ids[] = {
+	{ .compatible = "renesas,r8a779g0-cr52" },
+	{ .compatible = "renesas,r8a779h0-cr52" },
+	{ }
+};
+
+U_BOOT_DRIVER(renesas_apmu_rproc) = {
+	.name		= "rcar-apmu-rproc",
+	.of_match	= renesas_apmu_rproc_ids,
+	.id		= UCLASS_NOP,
+	.bind		= renesas_apmu_rproc_bind,
+};