1 files changed, 42 insertions, 20 deletions

diff --git a/drivers/serial/serial_msm.c b/drivers/serial/serial_msm.c
index f4d96313b93..ac4280c6c4c 100644
--- a/drivers/serial/serial_msm.c
+++ b/drivers/serial/serial_msm.c
@@ -160,29 +160,14 @@ static int msm_uart_clk_init(struct udevice *dev)
 {
 	uint clk_rate = fdtdec_get_uint(gd->fdt_blob, dev_of_offset(dev),
 					"clock-frequency", 115200);
-	uint clkd[2]; /* clk_id and clk_no */
-	int clk_offset;
-	struct udevice *clk_dev;
 	struct clk clk;
 	int ret;
 
-	ret = fdtdec_get_int_array(gd->fdt_blob, dev_of_offset(dev), "clock",
-				   clkd, 2);
-	if (ret)
-		return ret;
-
-	clk_offset = fdt_node_offset_by_phandle(gd->fdt_blob, clkd[0]);
-	if (clk_offset < 0)
-		return clk_offset;
-
-	ret = uclass_get_device_by_of_offset(UCLASS_CLK, clk_offset, &clk_dev);
-	if (ret)
-		return ret;
-
-	clk.id = clkd[1];
-	ret = clk_request(clk_dev, &clk);
-	if (ret < 0)
+	ret = clk_get_by_name(dev, "core", &clk);
+	if (ret < 0) {
+		pr_warn("%s: Failed to get clock: %d\n", __func__, ret);
 		return ret;
+	}
 
 	ret = clk_set_rate(&clk, clk_rate);
 	if (ret < 0)
@@ -218,7 +203,6 @@ static int msm_serial_probe(struct udevice *dev)
 	if (ret)
 		return ret;
 
-	pinctrl_select_state(dev, "uart");
 	uart_dm_init(priv);
 
 	return 0;
@@ -251,4 +235,42 @@ U_BOOT_DRIVER(serial_msm) = {
 	.priv_auto	= sizeof(struct msm_serial_data),
 	.probe = msm_serial_probe,
 	.ops	= &msm_serial_ops,
+	.flags = DM_FLAG_PRE_RELOC,
 };
+
+#ifdef CONFIG_DEBUG_UART_MSM
+
+static struct msm_serial_data init_serial_data = {
+	.base = CONFIG_VAL(DEBUG_UART_BASE),
+	.clk_rate = 7372800,
+};
+
+#include <debug_uart.h>
+
+/* Uncomment to turn on UART clocks when debugging U-Boot as aboot on MSM8916 */
+//int apq8016_clk_init_uart(phys_addr_t gcc_base);
+
+static inline void _debug_uart_init(void)
+{
+	/* Uncomment to turn on UART clocks when debugging U-Boot as aboot on MSM8916 */
+	//apq8016_clk_init_uart(0x1800000);
+	uart_dm_init(&init_serial_data);
+}
+
+static inline void _debug_uart_putc(int ch)
+{
+	struct msm_serial_data *priv = &init_serial_data;
+
+	while (!(readl(priv->base + UARTDM_SR) & UARTDM_SR_TX_EMPTY) &&
+	       !(readl(priv->base + UARTDM_ISR) & UARTDM_ISR_TX_READY))
+		;
+
+	writel(UARTDM_CR_CMD_RESET_TX_READY, priv->base + UARTDM_CR);
+
+	writel(1, priv->base + UARTDM_NCF_TX);
+	writel(ch, priv->base + UARTDM_TF);
+}
+
+DEBUG_UART_FUNCS
+
+#endif