diff options
Diffstat (limited to 'drivers/serial')
| -rw-r--r-- | drivers/serial/atmel_usart.c | 11 | ||||
| -rw-r--r-- | drivers/serial/ns16550.c | 2 | ||||
| -rw-r--r-- | drivers/serial/serial.c | 3 | ||||
| -rw-r--r-- | drivers/serial/serial_pl01x.c | 2 | ||||
| -rw-r--r-- | drivers/serial/serial_xuartlite.c | 34 |
5 files changed, 32 insertions, 20 deletions
diff --git a/drivers/serial/atmel_usart.c b/drivers/serial/atmel_usart.c index e326b2bcff9..943ef70fa60 100644 --- a/drivers/serial/atmel_usart.c +++ b/drivers/serial/atmel_usart.c @@ -49,17 +49,26 @@ int serial_init(void) { atmel_usart3_t *usart = (atmel_usart3_t *)CONFIG_USART_BASE; + /* + * Just in case: drain transmitter register + * 1000us is enough for baudrate >= 9600 + */ + if (!(readl(&usart->csr) & USART3_BIT(TXEMPTY))) + __udelay(1000); + writel(USART3_BIT(RSTRX) | USART3_BIT(RSTTX), &usart->cr); serial_setbrg(); - writel(USART3_BIT(RXEN) | USART3_BIT(TXEN), &usart->cr); writel((USART3_BF(USART_MODE, USART3_USART_MODE_NORMAL) | USART3_BF(USCLKS, USART3_USCLKS_MCK) | USART3_BF(CHRL, USART3_CHRL_8) | USART3_BF(PAR, USART3_PAR_NONE) | USART3_BF(NBSTOP, USART3_NBSTOP_1)), &usart->mr); + writel(USART3_BIT(RXEN) | USART3_BIT(TXEN), &usart->cr); + /* 100us is enough for the new settings to be settled */ + __udelay(100); return 0; } diff --git a/drivers/serial/ns16550.c b/drivers/serial/ns16550.c index 0c239553188..facadd2f5c3 100644 --- a/drivers/serial/ns16550.c +++ b/drivers/serial/ns16550.c @@ -52,7 +52,7 @@ void NS16550_init(NS16550_t com_port, int baud_divisor) serial_out((baud_divisor >> 8) & 0xff, &com_port->dlm); serial_out(UART_LCRVAL, &com_port->lcr); #if (defined(CONFIG_OMAP) && !defined(CONFIG_OMAP3_ZOOM2)) || \ - defined(CONFIG_AM33XX) + defined(CONFIG_AM33XX) || defined(CONFIG_SOC_DA8XX) #if defined(CONFIG_APTIX) /* /13 mode so Aptix 6MHz can hit 115200 */ diff --git a/drivers/serial/serial.c b/drivers/serial/serial.c index 0d6ad6283ac..b10bab70d02 100644 --- a/drivers/serial/serial.c +++ b/drivers/serial/serial.c @@ -84,9 +84,6 @@ static NS16550_t serial_ports[4] = { }; #define PORT serial_ports[port-1] -#if defined(CONFIG_CONS_INDEX) -#define CONSOLE (serial_ports[CONFIG_CONS_INDEX-1]) -#endif #if defined(CONFIG_SERIAL_MULTI) diff --git a/drivers/serial/serial_pl01x.c b/drivers/serial/serial_pl01x.c index ed581ae22bf..d4c5137092f 100644 --- a/drivers/serial/serial_pl01x.c +++ b/drivers/serial/serial_pl01x.c @@ -156,6 +156,8 @@ int serial_init (void) writel(lcr, ®s->fr); writel(lcr, ®s->pl011_rlcr); + /* lcrh needs to be set again for change to be effective */ + writel(lcr, ®s->pl011_lcrh); } #endif /* Finally, enable the UART */ diff --git a/drivers/serial/serial_xuartlite.c b/drivers/serial/serial_xuartlite.c index 3a38f9e327f..2bdb68ba4aa 100644 --- a/drivers/serial/serial_xuartlite.c +++ b/drivers/serial/serial_xuartlite.c @@ -89,11 +89,17 @@ int uartlite_serial_tstc(const int port) return in_be32(®s->status) & SR_RX_FIFO_VALID_DATA; } +static int uartlite_serial_init(const int port) +{ + if (userial_ports[port]) + return 0; + return -1; +} + #if !defined(CONFIG_SERIAL_MULTI) int serial_init(void) { - /* FIXME: Nothing for now. We should initialize fifo, etc */ - return 0; + return uartlite_serial_init(0); } void serial_setbrg(void) @@ -126,7 +132,7 @@ int serial_tstc(void) /* Multi serial device functions */ #define DECLARE_ESERIAL_FUNCTIONS(port) \ int userial##port##_init(void) \ - { return(0); } \ + { return uartlite_serial_init(port); } \ void userial##port##_setbrg(void) {} \ int userial##port##_getc(void) \ { return uartlite_serial_getc(port); } \ @@ -163,17 +169,15 @@ struct serial_device uartlite_serial3_device = __weak struct serial_device *default_serial_console(void) { -# ifdef XILINX_UARTLITE_BASEADDR - return &uartlite_serial0_device; -# endif /* XILINX_UARTLITE_BASEADDR */ -# ifdef XILINX_UARTLITE_BASEADDR1 - return &uartlite_serial1_device; -# endif /* XILINX_UARTLITE_BASEADDR1 */ -# ifdef XILINX_UARTLITE_BASEADDR2 - return &uartlite_serial2_device; -# endif /* XILINX_UARTLITE_BASEADDR2 */ -# ifdef XILINX_UARTLITE_BASEADDR3 - return &uartlite_serial3_device; -# endif /* XILINX_UARTLITE_BASEADDR3 */ + if (userial_ports[0]) + return &uartlite_serial0_device; + if (userial_ports[1]) + return &uartlite_serial1_device; + if (userial_ports[2]) + return &uartlite_serial2_device; + if (userial_ports[3]) + return &uartlite_serial3_device; + + return NULL; } #endif /* CONFIG_SERIAL_MULTI */ |