diff options
Diffstat (limited to 'drivers/usb/host')
| -rw-r--r-- | drivers/usb/host/Makefile | 5 | ||||
| -rw-r--r-- | drivers/usb/host/ehci-armada100.c | 48 | ||||
| -rw-r--r-- | drivers/usb/host/ehci-faraday.c | 144 | ||||
| -rw-r--r-- | drivers/usb/host/ehci-hcd.c | 5 | ||||
| -rw-r--r-- | drivers/usb/host/ehci-mx6.c | 4 | ||||
| -rw-r--r-- | drivers/usb/host/ehci-rmobile.c | 129 | ||||
| -rw-r--r-- | drivers/usb/host/ehci-tegra.c | 46 | ||||
| -rw-r--r-- | drivers/usb/host/ehci-vct.c | 44 | ||||
| -rw-r--r-- | drivers/usb/host/sl811-hcd.c | 714 | ||||
| -rw-r--r-- | drivers/usb/host/sl811.h | 104 | ||||
| -rw-r--r-- | drivers/usb/host/utmi-armada100.c | 80 |
11 files changed, 39 insertions, 1284 deletions
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile index ddc36632069..8dad36f9369 100644 --- a/drivers/usb/host/Makefile +++ b/drivers/usb/host/Makefile @@ -17,7 +17,6 @@ obj-$(CONFIG_USB_OHCI_NEW) += ohci-hcd.o obj-$(CONFIG_USB_ATMEL) += ohci-at91.o obj-$(CONFIG_USB_OHCI_DA8XX) += ohci-da8xx.o obj-$(CONFIG_USB_R8A66597_HCD) += r8a66597-hcd.o -obj-$(CONFIG_USB_SL811HS) += sl811-hcd.o obj-$(CONFIG_USB_OHCI_LPC32XX) += ohci-lpc32xx.o obj-$(CONFIG_USB_OHCI_PCI) += ohci-pci.o obj-$(CONFIG_USB_OHCI_GENERIC) += ohci-generic.o @@ -25,10 +24,8 @@ obj-$(CONFIG_USB_OHCI_NPCM) += ohci-npcm.o # echi obj-$(CONFIG_USB_EHCI_HCD) += ehci-hcd.o -obj-$(CONFIG_USB_EHCI_ARMADA100) += ehci-armada100.o utmi-armada100.o obj-$(CONFIG_USB_EHCI_ATMEL) += ehci-atmel.o obj-$(CONFIG_USB_EHCI_FSL) += ehci-fsl.o -obj-$(CONFIG_USB_EHCI_FARADAY) += ehci-faraday.o obj-$(CONFIG_USB_EHCI_GENERIC) += ehci-generic.o obj-$(CONFIG_USB_EHCI_EXYNOS) += ehci-exynos.o obj-$(CONFIG_USB_EHCI_MXS) += ehci-mxs.o @@ -41,9 +38,7 @@ obj-$(CONFIG_USB_EHCI_MARVELL) += ehci-marvell.o obj-$(CONFIG_USB_EHCI_MSM) += ehci-msm.o obj-$(CONFIG_USB_EHCI_PCI) += ehci-pci.o obj-$(CONFIG_USB_EHCI_TEGRA) += ehci-tegra.o -obj-$(CONFIG_USB_EHCI_VCT) += ehci-vct.o obj-$(CONFIG_USB_EHCI_VF) += ehci-vf.o -obj-$(CONFIG_USB_EHCI_RMOBILE) += ehci-rmobile.o obj-$(CONFIG_USB_EHCI_ZYNQ) += ehci-zynq.o # xhci diff --git a/drivers/usb/host/ehci-armada100.c b/drivers/usb/host/ehci-armada100.c deleted file mode 100644 index 2ce9f27b862..00000000000 --- a/drivers/usb/host/ehci-armada100.c +++ /dev/null @@ -1,48 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * (C) Copyright 2012 - * eInfochips Ltd. <www.einfochips.com> - * Written-by: Ajay Bhargav <contact@8051projects.net> - * - * This driver is based on Kirkwood echi driver - * (C) Copyright 2009 - * Marvell Semiconductor <www.marvell.com> - * Written-by: Prafulla Wadaskar <prafulla@marvell.com> - */ - -#include <common.h> -#include <log.h> -#include <asm/io.h> -#include <usb.h> -#include "ehci.h" -#include <asm/arch/cpu.h> -#include <asm/arch/armada100.h> -#include <asm/arch/utmi-armada100.h> - -/* - * EHCI host controller init - */ -int ehci_hcd_init(int index, enum usb_init_type init, - struct ehci_hccr **hccr, struct ehci_hcor **hcor) -{ - if (utmi_init() < 0) - return -1; - - *hccr = (struct ehci_hccr *)(ARMD1_USB_HOST_BASE + 0x100); - *hcor = (struct ehci_hcor *)((uint32_t) *hccr - + HC_LENGTH(ehci_readl(&(*hccr)->cr_capbase))); - - debug("armada100-ehci: init hccr %x and hcor %x hc_length %d\n", - (uint32_t)*hccr, (uint32_t)*hcor, - (uint32_t)HC_LENGTH(ehci_readl(&(*hccr)->cr_capbase))); - - return 0; -} - -/* - * EHCI host controller stop - */ -int ehci_hcd_stop(int index) -{ - return 0; -} diff --git a/drivers/usb/host/ehci-faraday.c b/drivers/usb/host/ehci-faraday.c deleted file mode 100644 index 85a35269601..00000000000 --- a/drivers/usb/host/ehci-faraday.c +++ /dev/null @@ -1,144 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Faraday USB 2.0 EHCI Controller - * - * (C) Copyright 2010 Faraday Technology - * Dante Su <dantesu@faraday-tech.com> - */ - -#include <common.h> -#include <log.h> -#include <asm/io.h> -#include <usb.h> -#include <linux/delay.h> -#include <usb/fusbh200.h> -#include <usb/fotg210.h> - -#include "ehci.h" - -#ifndef CFG_USB_EHCI_BASE_LIST -#define CFG_USB_EHCI_BASE_LIST { CONFIG_USB_EHCI_BASE } -#endif - -union ehci_faraday_regs { - struct fusbh200_regs usb; - struct fotg210_regs otg; -}; - -static inline int ehci_is_fotg2xx(union ehci_faraday_regs *regs) -{ - return !readl(®s->usb.easstr); -} - -void faraday_ehci_set_usbmode(struct ehci_ctrl *ctrl) -{ - /* nothing needs to be done */ -} - -int faraday_ehci_get_port_speed(struct ehci_ctrl *ctrl, uint32_t reg) -{ - int spd, ret = PORTSC_PSPD_HS; - union ehci_faraday_regs *regs; - - ret = (void __iomem *)((ulong)ctrl->hcor - 0x10); - if (ehci_is_fotg2xx(regs)) - spd = OTGCSR_SPD(readl(®s->otg.otgcsr)); - else - spd = BMCSR_SPD(readl(®s->usb.bmcsr)); - - switch (spd) { - case 0: /* full speed */ - ret = PORTSC_PSPD_FS; - break; - case 1: /* low speed */ - ret = PORTSC_PSPD_LS; - break; - case 2: /* high speed */ - ret = PORTSC_PSPD_HS; - break; - default: - printf("ehci-faraday: invalid device speed\n"); - break; - } - - return ret; -} - -uint32_t *faraday_ehci_get_portsc_register(struct ehci_ctrl *ctrl, int port) -{ - /* Faraday EHCI has one and only one portsc register */ - if (port) { - /* Printing the message would cause a scan failure! */ - debug("The request port(%d) is not configured\n", port); - return NULL; - } - - /* Faraday EHCI PORTSC register offset is 0x20 from hcor */ - return (uint32_t *)((uint8_t *)ctrl->hcor + 0x20); -} - -static const struct ehci_ops faraday_ehci_ops = { - .set_usb_mode = faraday_ehci_set_usbmode, - .get_port_speed = faraday_ehci_get_port_speed, - .get_portsc_register = faraday_ehci_get_portsc_register, -}; - -/* - * Create the appropriate control structures to manage - * a new EHCI host controller. - */ -int ehci_hcd_init(int index, enum usb_init_type init, - struct ehci_hccr **ret_hccr, struct ehci_hcor **ret_hcor) -{ - struct ehci_hccr *hccr; - struct ehci_hcor *hcor; - union ehci_faraday_regs *regs; - uint32_t base_list[] = CFG_USB_EHCI_BASE_LIST; - - if (index < 0 || index >= ARRAY_SIZE(base_list)) - return -1; - ehci_set_controller_priv(index, NULL, &faraday_ehci_ops); - regs = (void __iomem *)base_list[index]; - hccr = (struct ehci_hccr *)®s->usb.hccr; - hcor = (struct ehci_hcor *)®s->usb.hcor; - - if (ehci_is_fotg2xx(regs)) { - /* A-device bus reset */ - /* ... Power off A-device */ - setbits_le32(®s->otg.otgcsr, OTGCSR_A_BUSDROP); - /* ... Drop vbus and bus traffic */ - clrbits_le32(®s->otg.otgcsr, OTGCSR_A_BUSREQ); - mdelay(1); - /* ... Power on A-device */ - clrbits_le32(®s->otg.otgcsr, OTGCSR_A_BUSDROP); - /* ... Drive vbus and bus traffic */ - setbits_le32(®s->otg.otgcsr, OTGCSR_A_BUSREQ); - mdelay(1); - /* Disable OTG & DEV interrupts, triggered at level-high */ - writel(IMR_IRQLH | IMR_OTG | IMR_DEV, ®s->otg.imr); - /* Clear all interrupt status */ - writel(ISR_HOST | ISR_OTG | ISR_DEV, ®s->otg.isr); - } else { - /* Interrupt=level-high */ - setbits_le32(®s->usb.bmcsr, BMCSR_IRQLH); - /* VBUS on */ - clrbits_le32(®s->usb.bmcsr, BMCSR_VBUS_OFF); - /* Disable all interrupts */ - writel(0x00, ®s->usb.bmier); - writel(0x1f, ®s->usb.bmisr); - } - - *ret_hccr = hccr; - *ret_hcor = hcor; - - return 0; -} - -/* - * Destroy the appropriate control structures corresponding - * the the EHCI host controller. - */ -int ehci_hcd_stop(int index) -{ - return 0; -} diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 9139d61dd0c..9839aa17492 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -705,12 +705,10 @@ ehci_submit_async(struct usb_device *dev, unsigned long pipe, void *buffer, dev->act_len = length - QT_TOKEN_GET_TOTALBYTES(qhtoken); } else { dev->act_len = 0; -#ifndef CONFIG_USB_EHCI_FARADAY debug("dev=%u, usbsts=%#x, p[1]=%#x, p[2]=%#x\n", dev->devnum, ehci_readl(&ctrl->hcor->or_usbsts), ehci_readl(&ctrl->hcor->or_portsc[0]), ehci_readl(&ctrl->hcor->or_portsc[1])); -#endif } free(qtd); @@ -1190,9 +1188,6 @@ int usb_lowlevel_init(int index, enum usb_init_type init, void **controller) if (rc) return rc; #endif -#ifdef CONFIG_USB_EHCI_FARADAY - tweaks |= EHCI_TWEAK_NO_INIT_CF; -#endif rc = ehci_common_init(ctrl, tweaks); if (rc) return rc; diff --git a/drivers/usb/host/ehci-mx6.c b/drivers/usb/host/ehci-mx6.c index 0a12db614ff..91633f013a5 100644 --- a/drivers/usb/host/ehci-mx6.c +++ b/drivers/usb/host/ehci-mx6.c @@ -360,7 +360,7 @@ int ehci_hcd_init(int index, enum usb_init_type init, if (index > 3) return -EINVAL; - if (CONFIG_IS_ENABLED(IMX_MODULE_FUSE)) { + if (IS_ENABLED(CONFIG_IMX_MODULE_FUSE)) { if (usb_fused((ulong)ehci)) { printf("SoC fuse indicates USB@0x%lx is unavailable.\n", (ulong)ehci); @@ -641,7 +641,7 @@ static int ehci_usb_probe(struct udevice *dev) struct ehci_hcor *hcor; int ret; - if (CONFIG_IS_ENABLED(IMX_MODULE_FUSE)) { + if (IS_ENABLED(CONFIG_IMX_MODULE_FUSE)) { if (usb_fused((ulong)ehci)) { printf("SoC fuse indicates USB@0x%lx is unavailable.\n", (ulong)ehci); diff --git a/drivers/usb/host/ehci-rmobile.c b/drivers/usb/host/ehci-rmobile.c deleted file mode 100644 index 60525f22867..00000000000 --- a/drivers/usb/host/ehci-rmobile.c +++ /dev/null @@ -1,129 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * EHCI HCD (Host Controller Driver) for USB. - * - * Copyright (C) 2013,2014 Renesas Electronics Corporation - * Copyright (C) 2014 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> - */ - -#include <common.h> -#include <asm/io.h> -#include <asm/arch/ehci-rmobile.h> -#include <linux/delay.h> -#include "ehci.h" - -#if defined(CONFIG_R8A7740) -static u32 usb_base_address[] = { - 0xC6700000 -}; -#elif defined(CONFIG_R8A7790) -static u32 usb_base_address[] = { - 0xEE080000, /* USB0 (EHCI) */ - 0xEE0A0000, /* USB1 */ - 0xEE0C0000, /* USB2 */ -}; -#elif defined(CONFIG_R8A7791) || defined(CONFIG_R8A7793) || \ - defined(CONFIG_R8A7794) -static u32 usb_base_address[] = { - 0xEE080000, /* USB0 (EHCI) */ - 0xEE0C0000, /* USB1 */ -}; -#else -#error rmobile EHCI USB driver not supported on this platform -#endif - -int ehci_hcd_stop(int index) -{ - int i; - u32 base; - struct ahbcom_pci_bridge *ahbcom_pci; - - base = usb_base_address[index]; - ahbcom_pci = (struct ahbcom_pci_bridge *)(base + AHBPCI_OFFSET); - writel(0, &ahbcom_pci->ahb_bus_ctr); - - /* reset ehci */ - setbits_le32(base + EHCI_USBCMD, CMD_RESET); - for (i = 100; i > 0; i--) { - if (!(readl(base + EHCI_USBCMD) & CMD_RESET)) - break; - udelay(100); - } - - if (!i) - printf("error : ehci(%d) reset failed.\n", index); - - if (index == (ARRAY_SIZE(usb_base_address) - 1)) - setbits_le32(SMSTPCR7, SMSTPCR703); - - return 0; -} - -int ehci_hcd_init(int index, enum usb_init_type init, - struct ehci_hccr **hccr, struct ehci_hcor **hcor) -{ - u32 base; - u32 phys_base; - struct rmobile_ehci_reg *rehci; - struct ahbcom_pci_bridge *ahbcom_pci; - struct ahbconf_pci_bridge *ahbconf_pci; - struct ahb_pciconf *ahb_pciconf_ohci; - struct ahb_pciconf *ahb_pciconf_ehci; - uint32_t cap_base; - - base = usb_base_address[index]; - phys_base = base; - if (index == 0) - clrbits_le32(SMSTPCR7, SMSTPCR703); - - rehci = (struct rmobile_ehci_reg *)(base + EHCI_OFFSET); - ahbcom_pci = (struct ahbcom_pci_bridge *)(base + AHBPCI_OFFSET); - ahbconf_pci = - (struct ahbconf_pci_bridge *)(base + PCI_CONF_AHBPCI_OFFSET); - ahb_pciconf_ohci = (struct ahb_pciconf *)(base + PCI_CONF_OHCI_OFFSET); - ahb_pciconf_ehci = (struct ahb_pciconf *)(base + PCI_CONF_EHCI_OFFSET); - - /* Clock & Reset & Direct Power Down */ - clrsetbits_le32(&ahbcom_pci->usbctr, - (DIRPD | PCICLK_MASK | USBH_RST), USBCTR_WIN_SIZE_1GB); - clrbits_le32(&ahbcom_pci->usbctr, PLL_RST); - - /* AHB-PCI Bridge Communication Registers */ - writel(AHB_BUS_CTR_INIT, &ahbcom_pci->ahb_bus_ctr); - writel((CFG_SYS_SDRAM_BASE & 0xf0000000) | PCIAHB_WIN_PREFETCH, - &ahbcom_pci->pciahb_win1_ctr); - writel(0xf0000000 | PCIAHB_WIN_PREFETCH, - &ahbcom_pci->pciahb_win2_ctr); - writel(phys_base | PCIWIN2_PCICMD, &ahbcom_pci->ahbpci_win2_ctr); - - setbits_le32(&ahbcom_pci->pci_arbiter_ctr, - PCIBP_MODE | PCIREQ1 | PCIREQ0); - - /* PCI Configuration Registers for AHBPCI */ - writel(PCIWIN1_PCICMD | AHB_CFG_AHBPCI, - &ahbcom_pci->ahbpci_win1_ctr); - writel(phys_base + AHBPCI_OFFSET, &ahbconf_pci->basead); - writel(CFG_SYS_SDRAM_BASE & 0xf0000000, &ahbconf_pci->win1_basead); - writel(0xf0000000, &ahbconf_pci->win2_basead); - writel(SERREN | PERREN | MASTEREN | MEMEN, - &ahbconf_pci->cmnd_sts); - - /* PCI Configuration Registers for EHCI */ - writel(PCIWIN1_PCICMD | AHB_CFG_HOST, &ahbcom_pci->ahbpci_win1_ctr); - writel(phys_base + OHCI_OFFSET, &ahb_pciconf_ohci->basead); - writel(phys_base + EHCI_OFFSET, &ahb_pciconf_ehci->basead); - writel(SERREN | PERREN | MASTEREN | MEMEN, - &ahb_pciconf_ohci->cmnd_sts); - writel(SERREN | PERREN | MASTEREN | MEMEN, - &ahb_pciconf_ehci->cmnd_sts); - - /* Enable PCI interrupt */ - setbits_le32(&ahbcom_pci->pci_int_enable, - USBH_PMEEN | USBH_INTBEN | USBH_INTAEN); - - *hccr = (struct ehci_hccr *)((uint32_t)&rehci->hciversion); - cap_base = ehci_readl(&(*hccr)->cr_capbase); - *hcor = (struct ehci_hcor *)((uint32_t)*hccr + HC_LENGTH(cap_base)); - - return 0; -} diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c index 11d776747c0..76562bd749f 100644 --- a/drivers/usb/host/ehci-tegra.c +++ b/drivers/usb/host/ehci-tegra.c @@ -127,42 +127,70 @@ struct fdt_usb { static const unsigned T20_usb_pll[CLOCK_OSC_FREQ_COUNT][PARAM_COUNT] = { /* DivN, DivM, DivP, CPCON, LFCON, Delays Debounce, Bias */ { 0x3C0, 0x0D, 0x00, 0xC, 0, 0x02, 0x33, 0x05, 0x7F, 0x7EF4, 5 }, + { 0x3C0, 0x0D, 0x00, 0xC, 0, 0x02, 0x33, 0x05, 0x7F, 0x7EF4, 5 }, + { 0x000, 0x00, 0x00, 0x0, 0, 0x00, 0x00, 0x00, 0x00, 0x0000, 0 }, + { 0x000, 0x00, 0x00, 0x0, 0, 0x00, 0x00, 0x00, 0x00, 0x0000, 0 }, + { 0x0C8, 0x04, 0x00, 0x3, 0, 0x03, 0x4B, 0x06, 0xBB, 0xBB80, 7 }, { 0x0C8, 0x04, 0x00, 0x3, 0, 0x03, 0x4B, 0x06, 0xBB, 0xBB80, 7 }, + { 0x000, 0x00, 0x00, 0x0, 0, 0x00, 0x00, 0x00, 0x00, 0x0000, 0 }, + { 0x000, 0x00, 0x00, 0x0, 0, 0x00, 0x00, 0x00, 0x00, 0x0000, 0 }, + { 0x3C0, 0x0C, 0x00, 0xC, 0, 0x02, 0x2F, 0x04, 0x76, 0x7530, 5 }, { 0x3C0, 0x0C, 0x00, 0xC, 0, 0x02, 0x2F, 0x04, 0x76, 0x7530, 5 }, - { 0x3C0, 0x1A, 0x00, 0xC, 0, 0x04, 0x66, 0x09, 0xFE, 0xFDE8, 9 }, { 0x000, 0x00, 0x00, 0x0, 0, 0x00, 0x00, 0x00, 0x00, 0x0000, 0 }, - { 0x000, 0x00, 0x00, 0x0, 0, 0x00, 0x00, 0x00, 0x00, 0x0000, 0 } + { 0x000, 0x00, 0x00, 0x0, 0, 0x00, 0x00, 0x00, 0x00, 0x0000, 0 }, + { 0x3C0, 0x1A, 0x00, 0xC, 0, 0x04, 0x66, 0x09, 0xFE, 0xFDE8, 9 } }; static const unsigned T30_usb_pll[CLOCK_OSC_FREQ_COUNT][PARAM_COUNT] = { /* DivN, DivM, DivP, CPCON, LFCON, Delays Debounce, Bias */ { 0x3C0, 0x0D, 0x00, 0xC, 1, 0x02, 0x33, 0x09, 0x7F, 0x7EF4, 5 }, + { 0x3C0, 0x0D, 0x00, 0xC, 1, 0x02, 0x33, 0x09, 0x7F, 0x7EF4, 5 }, + { 0x000, 0x00, 0x00, 0x0, 0, 0x00, 0x00, 0x00, 0x00, 0x0000, 0 }, + { 0x000, 0x00, 0x00, 0x0, 0, 0x00, 0x00, 0x00, 0x00, 0x0000, 0 }, { 0x0C8, 0x04, 0x00, 0x3, 0, 0x03, 0x4B, 0x0C, 0xBB, 0xBB80, 7 }, + { 0x0C8, 0x04, 0x00, 0x3, 0, 0x03, 0x4B, 0x0C, 0xBB, 0xBB80, 7 }, + { 0x000, 0x00, 0x00, 0x0, 0, 0x00, 0x00, 0x00, 0x00, 0x0000, 0 }, + { 0x000, 0x00, 0x00, 0x0, 0, 0x00, 0x00, 0x00, 0x00, 0x0000, 0 }, { 0x3C0, 0x0C, 0x00, 0xC, 1, 0x02, 0x2F, 0x08, 0x76, 0x7530, 5 }, - { 0x3C0, 0x1A, 0x00, 0xC, 1, 0x04, 0x66, 0x09, 0xFE, 0xFDE8, 9 }, + { 0x3C0, 0x0C, 0x00, 0xC, 1, 0x02, 0x2F, 0x08, 0x76, 0x7530, 5 }, + { 0x000, 0x00, 0x00, 0x0, 0, 0x00, 0x00, 0x00, 0x00, 0x0000, 0 }, { 0x000, 0x00, 0x00, 0x0, 0, 0x00, 0x00, 0x00, 0x00, 0x0000, 0 }, - { 0x000, 0x00, 0x00, 0x0, 0, 0x00, 0x00, 0x00, 0x00, 0x0000, 0 } + { 0x3C0, 0x1A, 0x00, 0xC, 1, 0x04, 0x66, 0x09, 0xFE, 0xFDE8, 9 } }; static const unsigned T114_usb_pll[CLOCK_OSC_FREQ_COUNT][PARAM_COUNT] = { /* DivN, DivM, DivP, CPCON, LFCON, Delays Debounce, Bias */ { 0x3C0, 0x0D, 0x00, 0xC, 2, 0x02, 0x33, 0x09, 0x7F, 0x7EF4, 6 }, + { 0x3C0, 0x0D, 0x00, 0xC, 2, 0x02, 0x33, 0x09, 0x7F, 0x7EF4, 6 }, + { 0x000, 0x00, 0x00, 0x0, 0, 0x00, 0x00, 0x00, 0x00, 0x0000, 0 }, + { 0x000, 0x00, 0x00, 0x0, 0, 0x00, 0x00, 0x00, 0x00, 0x0000, 0 }, + { 0x0C8, 0x04, 0x00, 0x3, 2, 0x03, 0x4B, 0x0C, 0xBB, 0xBB80, 8 }, { 0x0C8, 0x04, 0x00, 0x3, 2, 0x03, 0x4B, 0x0C, 0xBB, 0xBB80, 8 }, + { 0x000, 0x00, 0x00, 0x0, 0, 0x00, 0x00, 0x00, 0x00, 0x0000, 0 }, + { 0x000, 0x00, 0x00, 0x0, 0, 0x00, 0x00, 0x00, 0x00, 0x0000, 0 }, + { 0x3C0, 0x0C, 0x00, 0xC, 2, 0x02, 0x2F, 0x08, 0x76, 0x7530, 5 }, { 0x3C0, 0x0C, 0x00, 0xC, 2, 0x02, 0x2F, 0x08, 0x76, 0x7530, 5 }, - { 0x3C0, 0x1A, 0x00, 0xC, 2, 0x04, 0x66, 0x09, 0xFE, 0xFDE8, 11 }, { 0x000, 0x00, 0x00, 0x0, 0, 0x00, 0x00, 0x00, 0x00, 0x0000, 0 }, - { 0x000, 0x00, 0x00, 0x0, 0, 0x00, 0x00, 0x00, 0x00, 0x0000, 0 } + { 0x000, 0x00, 0x00, 0x0, 0, 0x00, 0x00, 0x00, 0x00, 0x0000, 0 }, + { 0x3C0, 0x1A, 0x00, 0xC, 2, 0x04, 0x66, 0x09, 0xFE, 0xFDE8, 11 } }; /* NOTE: 13/26MHz settings are N/A for T210, so dupe 12MHz settings for now */ static const unsigned T210_usb_pll[CLOCK_OSC_FREQ_COUNT][PARAM_COUNT] = { /* DivN, DivM, DivP, KCP, KVCO, Delays Debounce, Bias */ { 0x028, 0x01, 0x01, 0x0, 0, 0x02, 0x2F, 0x08, 0x76, 32500, 5 }, + { 0x028, 0x01, 0x01, 0x0, 0, 0x02, 0x2F, 0x08, 0x76, 32500, 5 }, + { 0x000, 0x00, 0x00, 0x0, 0, 0x00, 0x00, 0x00, 0x00, 0, 0 }, + { 0x000, 0x00, 0x00, 0x0, 0, 0x00, 0x00, 0x00, 0x00, 0, 0 }, { 0x019, 0x01, 0x01, 0x0, 0, 0x03, 0x4B, 0x0C, 0xBB, 48000, 8 }, - { 0x028, 0x01, 0x01, 0x0, 0, 0x02, 0x2F, 0x08, 0x76, 30000, 5 }, - { 0x028, 0x01, 0x01, 0x0, 0, 0x02, 0x2F, 0x08, 0x76, 65000, 5 }, { 0x019, 0x02, 0x01, 0x0, 0, 0x05, 0x96, 0x18, 0x177, 96000, 15 }, - { 0x028, 0x04, 0x01, 0x0, 0, 0x04, 0x66, 0x09, 0xFE, 120000, 20 } + { 0x000, 0x00, 0x00, 0x0, 0, 0x00, 0x00, 0x00, 0x00, 0, 0 }, + { 0x000, 0x00, 0x00, 0x0, 0, 0x00, 0x00, 0x00, 0x00, 0, 0 }, + { 0x028, 0x01, 0x01, 0x0, 0, 0x02, 0x2F, 0x08, 0x76, 30000, 5 }, + { 0x028, 0x04, 0x01, 0x0, 0, 0x04, 0x66, 0x09, 0xFE, 120000, 20 }, + { 0x000, 0x00, 0x00, 0x0, 0, 0x00, 0x00, 0x00, 0x00, 0, 0 }, + { 0x000, 0x00, 0x00, 0x0, 0, 0x00, 0x00, 0x00, 0x00, 0, 0 }, + { 0x028, 0x01, 0x01, 0x0, 0, 0x02, 0x2F, 0x08, 0x76, 65000, 5 } }; /* UTMIP Idle Wait Delay */ diff --git a/drivers/usb/host/ehci-vct.c b/drivers/usb/host/ehci-vct.c deleted file mode 100644 index 7167f82b481..00000000000 --- a/drivers/usb/host/ehci-vct.c +++ /dev/null @@ -1,44 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * (C) Copyright 2009 Stefan Roese <sr@denx.de>, DENX Software Engineering - */ - -#include <common.h> -#include <usb.h> - -#include "ehci.h" - -int vct_ehci_hcd_init(u32 *hccr, u32 *hcor); - -/* - * Create the appropriate control structures to manage - * a new EHCI host controller. - */ -int ehci_hcd_init(int index, enum usb_init_type init, - struct ehci_hccr **hccr, struct ehci_hcor **hcor) -{ - int ret; - u32 vct_hccr; - u32 vct_hcor; - - /* - * Init VCT specific stuff - */ - ret = vct_ehci_hcd_init(&vct_hccr, &vct_hcor); - if (ret) - return ret; - - *hccr = (struct ehci_hccr *)vct_hccr; - *hcor = (struct ehci_hcor *)vct_hcor; - - return 0; -} - -/* - * Destroy the appropriate control structures corresponding - * the the EHCI host controller. - */ -int ehci_hcd_stop(int index) -{ - return 0; -} diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c deleted file mode 100644 index 7c823f241a8..00000000000 --- a/drivers/usb/host/sl811-hcd.c +++ /dev/null @@ -1,714 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * (C) Copyright 2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * This code is based on linux driver for sl811hs chip, source at - * drivers/usb/host/sl811.c: - * - * SL811 Host Controller Interface driver for USB. - * - * Copyright (c) 2003/06, Courage Co., Ltd. - * - * Based on: - * 1.uhci.c by Linus Torvalds, Johannes Erdfelt, Randy Dunlap, - * Georg Acher, Deti Fliegl, Thomas Sailer, Roman Weissgaerber, - * Adam Richter, Gregory P. Smith; - * 2.Original SL811 driver (hc_sl811.o) by Pei Liu <pbl@cypress.com> - * 3.Rewrited as sl811.o by Yin Aihua <yinah:couragetech.com.cn> - */ - -#include <common.h> -#include <mpc8xx.h> -#include <usb.h> -#include <linux/delay.h> -#include "sl811.h" - -#include "../../../board/kup/common/kup.h" - -#ifdef __PPC__ -# define EIEIO __asm__ volatile ("eieio") -#else -# define EIEIO /* nothing */ -#endif - -#define SL811_ADR (0x50000000) -#define SL811_DAT (0x50000001) - -#ifdef SL811_DEBUG -static int debug = 9; -#endif - -static int root_hub_devnum = 0; -static struct usb_port_status rh_status = { 0 };/* root hub port status */ - -static int sl811_rh_submit_urb(struct usb_device *usb_dev, unsigned long pipe, - void *data, int buf_len, struct devrequest *cmd); - -static void sl811_write (__u8 index, __u8 data) -{ - *(volatile unsigned char *) (SL811_ADR) = index; - EIEIO; - *(volatile unsigned char *) (SL811_DAT) = data; - EIEIO; -} - -static __u8 sl811_read (__u8 index) -{ - __u8 data; - - *(volatile unsigned char *) (SL811_ADR) = index; - EIEIO; - data = *(volatile unsigned char *) (SL811_DAT); - EIEIO; - return (data); -} - -/* - * Read consecutive bytes of data from the SL811H/SL11H buffer - */ -static void inline sl811_read_buf(__u8 offset, __u8 *buf, __u8 size) -{ - *(volatile unsigned char *) (SL811_ADR) = offset; - EIEIO; - while (size--) { - *buf++ = *(volatile unsigned char *) (SL811_DAT); - EIEIO; - } -} - -/* - * Write consecutive bytes of data to the SL811H/SL11H buffer - */ -static void inline sl811_write_buf(__u8 offset, __u8 *buf, __u8 size) -{ - *(volatile unsigned char *) (SL811_ADR) = offset; - EIEIO; - while (size--) { - *(volatile unsigned char *) (SL811_DAT) = *buf++; - EIEIO; - } -} - -int usb_init_kup4x (void) -{ - volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - volatile memctl8xx_t *memctl = &immap->im_memctl; - int i; - unsigned char tmp; - - memctl = &immap->im_memctl; - memctl->memc_or7 = 0xFFFF8726; - memctl->memc_br7 = 0x50000401; /* start at 0x50000000 */ - /* BP 14 low = USB ON */ - immap->im_cpm.cp_pbdat &= ~(BP_USB_VCC); - /* PB 14 nomal port */ - immap->im_cpm.cp_pbpar &= ~(BP_USB_VCC); - /* output */ - immap->im_cpm.cp_pbdir |= (BP_USB_VCC); - - puts ("USB: "); - - for (i = 0x10; i < 0xff; i++) { - sl811_write(i, i); - tmp = (sl811_read(i)); - if (tmp != i) { - printf ("SL811 compare error index=0x%02x read=0x%02x\n", i, tmp); - return (-1); - } - } - printf ("SL811 ready\n"); - return (0); -} - -/* - * This function resets SL811HS controller and detects the speed of - * the connecting device - * - * Return: 0 = no device attached; 1 = USB device attached - */ -static int sl811_hc_reset(void) -{ - int status ; - - sl811_write(SL811_CTRL2, SL811_CTL2_HOST | SL811_12M_HI); - sl811_write(SL811_CTRL1, SL811_CTRL1_RESET); - - mdelay(20); - - /* Disable hardware SOF generation, clear all irq status. */ - sl811_write(SL811_CTRL1, 0); - mdelay(2); - sl811_write(SL811_INTRSTS, 0xff); - status = sl811_read(SL811_INTRSTS); - - if (status & SL811_INTR_NOTPRESENT) { - /* Device is not present */ - PDEBUG(0, "Device not present\n"); - rh_status.wPortStatus &= ~(USB_PORT_STAT_CONNECTION | USB_PORT_STAT_ENABLE); - rh_status.wPortChange |= USB_PORT_STAT_C_CONNECTION; - sl811_write(SL811_INTR, SL811_INTR_INSRMV); - return 0; - } - - /* Send SOF to address 0, endpoint 0. */ - sl811_write(SL811_LEN_B, 0); - sl811_write(SL811_PIDEP_B, PIDEP(USB_PID_SOF, 0)); - sl811_write(SL811_DEV_B, 0x00); - sl811_write(SL811_SOFLOW, SL811_12M_LOW); - - if (status & SL811_INTR_SPEED_FULL) { - /* full speed device connect directly to root hub */ - PDEBUG (0, "Full speed Device attached\n"); - - sl811_write(SL811_CTRL1, SL811_CTRL1_RESET); - mdelay(20); - sl811_write(SL811_CTRL2, SL811_CTL2_HOST | SL811_12M_HI); - sl811_write(SL811_CTRL1, SL811_CTRL1_SOF); - - /* start the SOF or EOP */ - sl811_write(SL811_CTRL_B, SL811_USB_CTRL_ARM); - rh_status.wPortStatus |= USB_PORT_STAT_CONNECTION; - rh_status.wPortStatus &= ~USB_PORT_STAT_LOW_SPEED; - mdelay(2); - sl811_write(SL811_INTRSTS, 0xff); - } else { - /* slow speed device connect directly to root-hub */ - PDEBUG(0, "Low speed Device attached\n"); - - sl811_write(SL811_CTRL1, SL811_CTRL1_RESET); - mdelay(20); - sl811_write(SL811_CTRL2, SL811_CTL2_HOST | SL811_CTL2_DSWAP | SL811_12M_HI); - sl811_write(SL811_CTRL1, SL811_CTRL1_SPEED_LOW | SL811_CTRL1_SOF); - - /* start the SOF or EOP */ - sl811_write(SL811_CTRL_B, SL811_USB_CTRL_ARM); - rh_status.wPortStatus |= USB_PORT_STAT_CONNECTION | USB_PORT_STAT_LOW_SPEED; - mdelay(2); - sl811_write(SL811_INTRSTS, 0xff); - } - - rh_status.wPortChange |= USB_PORT_STAT_C_CONNECTION; - sl811_write(SL811_INTR, /*SL811_INTR_INSRMV*/SL811_INTR_DONE_A); - - return 1; -} - -int usb_lowlevel_init(int index, enum usb_init_type init, void **controller) -{ - root_hub_devnum = 0; - sl811_hc_reset(); - return 0; -} - -int usb_lowlevel_stop(int index) -{ - sl811_hc_reset(); - return 0; -} - -static int calc_needed_buswidth(int bytes, int need_preamble) -{ - return !need_preamble ? bytes * 8 + 256 : 8 * 8 * bytes + 2048; -} - -static int sl811_send_packet(struct usb_device *dev, unsigned long pipe, __u8 *buffer, int len) -{ - __u8 ctrl = SL811_USB_CTRL_ARM | SL811_USB_CTRL_ENABLE; - __u16 status = 0; - int err = 0, time_start = get_timer(0); - int need_preamble = !(rh_status.wPortStatus & USB_PORT_STAT_LOW_SPEED) && - (dev->speed == USB_SPEED_LOW); - - if (len > 239) - return -1; - - if (usb_pipeout(pipe)) - ctrl |= SL811_USB_CTRL_DIR_OUT; - if (usb_gettoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe))) - ctrl |= SL811_USB_CTRL_TOGGLE_1; - if (need_preamble) - ctrl |= SL811_USB_CTRL_PREAMBLE; - - sl811_write(SL811_INTRSTS, 0xff); - - while (err < 3) { - sl811_write(SL811_ADDR_A, 0x10); - sl811_write(SL811_LEN_A, len); - if (usb_pipeout(pipe) && len) - sl811_write_buf(0x10, buffer, len); - - if (!(rh_status.wPortStatus & USB_PORT_STAT_LOW_SPEED) && - sl811_read(SL811_SOFCNTDIV)*64 < calc_needed_buswidth(len, need_preamble)) - ctrl |= SL811_USB_CTRL_SOF; - else - ctrl &= ~SL811_USB_CTRL_SOF; - - sl811_write(SL811_CTRL_A, ctrl); - while (!(sl811_read(SL811_INTRSTS) & SL811_INTR_DONE_A)) { - if (5*CONFIG_SYS_HZ < get_timer(time_start)) { - printf("USB transmit timed out\n"); - return -USB_ST_CRC_ERR; - } - } - - sl811_write(SL811_INTRSTS, 0xff); - status = sl811_read(SL811_STS_A); - - if (status & SL811_USB_STS_ACK) { - int remainder = sl811_read(SL811_CNT_A); - if (remainder) { - PDEBUG(0, "usb transfer remainder = %d\n", remainder); - len -= remainder; - } - if (usb_pipein(pipe) && len) - sl811_read_buf(0x10, buffer, len); - return len; - } - - if ((status & SL811_USB_STS_NAK) == SL811_USB_STS_NAK) - continue; - - PDEBUG(0, "usb transfer error %#x\n", (int)status); - err++; - } - - err = 0; - - if (status & SL811_USB_STS_ERROR) - err |= USB_ST_BUF_ERR; - if (status & SL811_USB_STS_TIMEOUT) - err |= USB_ST_CRC_ERR; - if (status & SL811_USB_STS_STALL) - err |= USB_ST_STALLED; - - return -err; -} - -int submit_bulk_msg(struct usb_device *dev, unsigned long pipe, void *buffer, - int len) -{ - int dir_out = usb_pipeout(pipe); - int ep = usb_pipeendpoint(pipe); - int max = usb_maxpacket(dev, pipe); - int done = 0; - - PDEBUG(7, "dev = %ld pipe = %ld buf = %p size = %d dir_out = %d\n", - usb_pipedevice(pipe), usb_pipeendpoint(pipe), buffer, len, dir_out); - - dev->status = 0; - - sl811_write(SL811_DEV_A, usb_pipedevice(pipe)); - sl811_write(SL811_PIDEP_A, PIDEP(!dir_out ? USB_PID_IN : USB_PID_OUT, ep)); - while (done < len) { - int res = sl811_send_packet(dev, pipe, (__u8*)buffer+done, - max > len - done ? len - done : max); - if (res < 0) { - dev->status = -res; - return res; - } - - if (!dir_out && res < max) /* short packet */ - break; - - done += res; - usb_dotoggle(dev, ep, dir_out); - } - - dev->act_len = done; - - return 0; -} - -int submit_control_msg(struct usb_device *dev, unsigned long pipe, void *buffer, - int len,struct devrequest *setup) -{ - int done = 0; - int devnum = usb_pipedevice(pipe); - int ep = usb_pipeendpoint(pipe); - - dev->status = 0; - - if (devnum == root_hub_devnum) - return sl811_rh_submit_urb(dev, pipe, buffer, len, setup); - - PDEBUG(7, "dev = %d pipe = %ld buf = %p size = %d rt = %#x req = %#x bus = %i\n", - devnum, ep, buffer, len, (int)setup->requesttype, - (int)setup->request, sl811_read(SL811_SOFCNTDIV)*64); - - sl811_write(SL811_DEV_A, devnum); - sl811_write(SL811_PIDEP_A, PIDEP(USB_PID_SETUP, ep)); - /* setup phase */ - usb_settoggle(dev, ep, 1, 0); - if (sl811_send_packet(dev, usb_sndctrlpipe(dev, ep), - (__u8*)setup, sizeof(*setup)) == sizeof(*setup)) { - int dir_in = usb_pipein(pipe); - int max = usb_maxpacket(dev, pipe); - - /* data phase */ - sl811_write(SL811_PIDEP_A, - PIDEP(dir_in ? USB_PID_IN : USB_PID_OUT, ep)); - usb_settoggle(dev, ep, usb_pipeout(pipe), 1); - while (done < len) { - int res = sl811_send_packet(dev, pipe, (__u8*)buffer+done, - max > len - done ? len - done : max); - if (res < 0) { - PDEBUG(0, "status data failed!\n"); - dev->status = -res; - return 0; - } - done += res; - usb_dotoggle(dev, ep, usb_pipeout(pipe)); - if (dir_in && res < max) /* short packet */ - break; - } - - /* status phase */ - sl811_write(SL811_PIDEP_A, - PIDEP(!dir_in ? USB_PID_IN : USB_PID_OUT, ep)); - usb_settoggle(dev, ep, !usb_pipeout(pipe), 1); - if (sl811_send_packet(dev, - !dir_in ? usb_rcvctrlpipe(dev, ep) : - usb_sndctrlpipe(dev, ep), - 0, 0) < 0) { - PDEBUG(0, "status phase failed!\n"); - dev->status = -1; - } - } else { - PDEBUG(0, "setup phase failed!\n"); - dev->status = -1; - } - - dev->act_len = done; - - return done; -} - -int submit_int_msg(struct usb_device *dev, unsigned long pipe, void *buffer, - int len, int interval, bool nonblock) -{ - PDEBUG(0, "dev = %p pipe = %#lx buf = %p size = %d int = %d\n", dev, pipe, - buffer, len, interval); - return -1; -} - -/* - * SL811 Virtual Root Hub - */ - -/* Device descriptor */ -static __u8 sl811_rh_dev_des[] = -{ - 0x12, /* __u8 bLength; */ - 0x01, /* __u8 bDescriptorType; Device */ - 0x10, /* __u16 bcdUSB; v1.1 */ - 0x01, - 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */ - 0x00, /* __u8 bDeviceSubClass; */ - 0x00, /* __u8 bDeviceProtocol; */ - 0x08, /* __u8 bMaxPacketSize0; 8 Bytes */ - 0x00, /* __u16 idVendor; */ - 0x00, - 0x00, /* __u16 idProduct; */ - 0x00, - 0x00, /* __u16 bcdDevice; */ - 0x00, - 0x00, /* __u8 iManufacturer; */ - 0x02, /* __u8 iProduct; */ - 0x01, /* __u8 iSerialNumber; */ - 0x01 /* __u8 bNumConfigurations; */ -}; - -/* Configuration descriptor */ -static __u8 sl811_rh_config_des[] = -{ - 0x09, /* __u8 bLength; */ - 0x02, /* __u8 bDescriptorType; Configuration */ - 0x19, /* __u16 wTotalLength; */ - 0x00, - 0x01, /* __u8 bNumInterfaces; */ - 0x01, /* __u8 bConfigurationValue; */ - 0x00, /* __u8 iConfiguration; */ - 0x40, /* __u8 bmAttributes; - Bit 7: Bus-powered, 6: Self-powered, 5 Remote-wakwup, - 4..0: resvd */ - 0x00, /* __u8 MaxPower; */ - - /* interface */ - 0x09, /* __u8 if_bLength; */ - 0x04, /* __u8 if_bDescriptorType; Interface */ - 0x00, /* __u8 if_bInterfaceNumber; */ - 0x00, /* __u8 if_bAlternateSetting; */ - 0x01, /* __u8 if_bNumEndpoints; */ - 0x09, /* __u8 if_bInterfaceClass; HUB_CLASSCODE */ - 0x00, /* __u8 if_bInterfaceSubClass; */ - 0x00, /* __u8 if_bInterfaceProtocol; */ - 0x00, /* __u8 if_iInterface; */ - - /* endpoint */ - 0x07, /* __u8 ep_bLength; */ - 0x05, /* __u8 ep_bDescriptorType; Endpoint */ - 0x81, /* __u8 ep_bEndpointAddress; IN Endpoint 1 */ - 0x03, /* __u8 ep_bmAttributes; Interrupt */ - 0x08, /* __u16 ep_wMaxPacketSize; */ - 0x00, - 0xff /* __u8 ep_bInterval; 255 ms */ -}; - -/* root hub class descriptor*/ -static __u8 sl811_rh_hub_des[] = -{ - 0x09, /* __u8 bLength; */ - 0x29, /* __u8 bDescriptorType; Hub-descriptor */ - 0x01, /* __u8 bNbrPorts; */ - 0x00, /* __u16 wHubCharacteristics; */ - 0x00, - 0x50, /* __u8 bPwrOn2pwrGood; 2ms */ - 0x00, /* __u8 bHubContrCurrent; 0 mA */ - 0xfc, /* __u8 DeviceRemovable; *** 7 Ports max *** */ - 0xff /* __u8 PortPwrCtrlMask; *** 7 ports max *** */ -}; - -/* - * helper routine for returning string descriptors in UTF-16LE - * input can actually be ISO-8859-1; ASCII is its 7-bit subset - */ -static int ascii2utf (char *s, u8 *utf, int utfmax) -{ - int retval; - - for (retval = 0; *s && utfmax > 1; utfmax -= 2, retval += 2) { - *utf++ = *s++; - *utf++ = 0; - } - return retval; -} - -/* - * root_hub_string is used by each host controller's root hub code, - * so that they're identified consistently throughout the system. - */ -static int usb_root_hub_string (int id, int serial, char *type, __u8 *data, int len) -{ - char buf [30]; - - /* assert (len > (2 * (sizeof (buf) + 1))); - assert (strlen (type) <= 8);*/ - - /* language ids */ - if (id == 0) { - *data++ = 4; *data++ = 3; /* 4 bytes data */ - *data++ = 0; *data++ = 0; /* some language id */ - return 4; - - /* serial number */ - } else if (id == 1) { - sprintf (buf, "%#x", serial); - - /* product description */ - } else if (id == 2) { - sprintf (buf, "USB %s Root Hub", type); - - /* id 3 == vendor description */ - - /* unsupported IDs --> "stall" */ - } else - return 0; - - ascii2utf (buf, data + 2, len - 2); - data [0] = 2 + strlen(buf) * 2; - data [1] = 3; - return data [0]; -} - -/* helper macro */ -#define OK(x) len = (x); break - -/* - * This function handles all USB request to the the virtual root hub - */ -static int sl811_rh_submit_urb(struct usb_device *usb_dev, unsigned long pipe, - void *data, int buf_len, struct devrequest *cmd) -{ - __u8 data_buf[16]; - __u8 *bufp = data_buf; - int len = 0; - int status = 0; - __u16 bmRType_bReq; - __u16 wValue = le16_to_cpu (cmd->value); - __u16 wLength = le16_to_cpu (cmd->length); -#ifdef SL811_DEBUG - __u16 wIndex = le16_to_cpu (cmd->index); -#endif - - if (usb_pipeint(pipe)) { - PDEBUG(0, "interrupt transfer unimplemented!\n"); - return 0; - } - - bmRType_bReq = cmd->requesttype | (cmd->request << 8); - - PDEBUG(5, "submit rh urb, req = %d(%x) val = %#x index = %#x len=%d\n", - bmRType_bReq, bmRType_bReq, wValue, wIndex, wLength); - - /* Request Destination: - without flags: Device, - USB_RECIP_INTERFACE: interface, - USB_RECIP_ENDPOINT: endpoint, - USB_TYPE_CLASS means HUB here, - USB_RECIP_OTHER | USB_TYPE_CLASS almost ever means HUB_PORT here - */ - switch (bmRType_bReq) { - case RH_GET_STATUS: - *(__u16 *)bufp = cpu_to_le16(1); - OK(2); - - case RH_GET_STATUS | USB_RECIP_INTERFACE: - *(__u16 *)bufp = cpu_to_le16(0); - OK(2); - - case RH_GET_STATUS | USB_RECIP_ENDPOINT: - *(__u16 *)bufp = cpu_to_le16(0); - OK(2); - - case RH_GET_STATUS | USB_TYPE_CLASS: - *(__u32 *)bufp = cpu_to_le32(0); - OK(4); - - case RH_GET_STATUS | USB_RECIP_OTHER | USB_TYPE_CLASS: - *(__u32 *)bufp = cpu_to_le32(rh_status.wPortChange<<16 | rh_status.wPortStatus); - OK(4); - - case RH_CLEAR_FEATURE | USB_RECIP_ENDPOINT: - switch (wValue) { - case 1: - OK(0); - } - break; - - case RH_CLEAR_FEATURE | USB_TYPE_CLASS: - switch (wValue) { - case C_HUB_LOCAL_POWER: - OK(0); - - case C_HUB_OVER_CURRENT: - OK(0); - } - break; - - case RH_CLEAR_FEATURE | USB_RECIP_OTHER | USB_TYPE_CLASS: - switch (wValue) { - case USB_PORT_FEAT_ENABLE: - rh_status.wPortStatus &= ~USB_PORT_STAT_ENABLE; - OK(0); - - case USB_PORT_FEAT_SUSPEND: - rh_status.wPortStatus &= ~USB_PORT_STAT_SUSPEND; - OK(0); - - case USB_PORT_FEAT_POWER: - rh_status.wPortStatus &= ~USB_PORT_STAT_POWER; - OK(0); - - case USB_PORT_FEAT_C_CONNECTION: - rh_status.wPortChange &= ~USB_PORT_STAT_C_CONNECTION; - OK(0); - - case USB_PORT_FEAT_C_ENABLE: - rh_status.wPortChange &= ~USB_PORT_STAT_C_ENABLE; - OK(0); - - case USB_PORT_FEAT_C_SUSPEND: - rh_status.wPortChange &= ~USB_PORT_STAT_C_SUSPEND; - OK(0); - - case USB_PORT_FEAT_C_OVER_CURRENT: - rh_status.wPortChange &= ~USB_PORT_STAT_C_OVERCURRENT; - OK(0); - - case USB_PORT_FEAT_C_RESET: - rh_status.wPortChange &= ~USB_PORT_STAT_C_RESET; - OK(0); - } - break; - - case RH_SET_FEATURE | USB_RECIP_OTHER | USB_TYPE_CLASS: - switch (wValue) { - case USB_PORT_FEAT_SUSPEND: - rh_status.wPortStatus |= USB_PORT_STAT_SUSPEND; - OK(0); - - case USB_PORT_FEAT_RESET: - rh_status.wPortStatus |= USB_PORT_STAT_RESET; - rh_status.wPortChange = 0; - rh_status.wPortChange |= USB_PORT_STAT_C_RESET; - rh_status.wPortStatus &= ~USB_PORT_STAT_RESET; - rh_status.wPortStatus |= USB_PORT_STAT_ENABLE; - OK(0); - - case USB_PORT_FEAT_POWER: - rh_status.wPortStatus |= USB_PORT_STAT_POWER; - OK(0); - - case USB_PORT_FEAT_ENABLE: - rh_status.wPortStatus |= USB_PORT_STAT_ENABLE; - OK(0); - } - break; - - case RH_SET_ADDRESS: - root_hub_devnum = wValue; - OK(0); - - case RH_GET_DESCRIPTOR: - switch ((wValue & 0xff00) >> 8) { - case USB_DT_DEVICE: - len = sizeof(sl811_rh_dev_des); - bufp = sl811_rh_dev_des; - OK(len); - - case USB_DT_CONFIG: - len = sizeof(sl811_rh_config_des); - bufp = sl811_rh_config_des; - OK(len); - - case USB_DT_STRING: - len = usb_root_hub_string(wValue & 0xff, (int)(long)0, "SL811HS", data, wLength); - if (len > 0) { - bufp = data; - OK(len); - } - - default: - status = -32; - } - break; - - case RH_GET_DESCRIPTOR | USB_TYPE_CLASS: - len = sizeof(sl811_rh_hub_des); - bufp = sl811_rh_hub_des; - OK(len); - - case RH_GET_CONFIGURATION: - bufp[0] = 0x01; - OK(1); - - case RH_SET_CONFIGURATION: - OK(0); - - default: - PDEBUG(1, "unsupported root hub command\n"); - status = -32; - } - - len = min(len, buf_len); - if (data != bufp) - memcpy(data, bufp, len); - - PDEBUG(5, "len = %d, status = %d\n", len, status); - - usb_dev->status = status; - usb_dev->act_len = len; - - return status == 0 ? len : status; -} diff --git a/drivers/usb/host/sl811.h b/drivers/usb/host/sl811.h deleted file mode 100644 index c1f9f013bd1..00000000000 --- a/drivers/usb/host/sl811.h +++ /dev/null @@ -1,104 +0,0 @@ -#ifndef __UBOOT_SL811_H -#define __UBOOT_SL811_H - -#undef SL811_DEBUG - -#ifdef SL811_DEBUG - #define PDEBUG(level, fmt, args...) \ - if (debug >= (level)) printf("[%s:%d] " fmt, \ - __PRETTY_FUNCTION__, __LINE__ , ## args) -#else - #define PDEBUG(level, fmt, args...) do {} while(0) -#endif - -/* Sl811 host control register */ -#define SL811_CTRL_A 0x00 -#define SL811_ADDR_A 0x01 -#define SL811_LEN_A 0x02 -#define SL811_STS_A 0x03 /* read */ -#define SL811_PIDEP_A 0x03 /* write */ -#define SL811_CNT_A 0x04 /* read */ -#define SL811_DEV_A 0x04 /* write */ -#define SL811_CTRL1 0x05 -#define SL811_INTR 0x06 -#define SL811_CTRL_B 0x08 -#define SL811_ADDR_B 0x09 -#define SL811_LEN_B 0x0A -#define SL811_STS_B 0x0B /* read */ -#define SL811_PIDEP_B 0x0B /* write */ -#define SL811_CNT_B 0x0C /* read */ -#define SL811_DEV_B 0x0C /* write */ -#define SL811_INTRSTS 0x0D /* write clears bitwise */ -#define SL811_HWREV 0x0E /* read */ -#define SL811_SOFLOW 0x0E /* write */ -#define SL811_SOFCNTDIV 0x0F /* read */ -#define SL811_CTRL2 0x0F /* write */ - -/* USB control register bits (addr 0x00 and addr 0x08) */ -#define SL811_USB_CTRL_ARM 0x01 -#define SL811_USB_CTRL_ENABLE 0x02 -#define SL811_USB_CTRL_DIR_OUT 0x04 -#define SL811_USB_CTRL_ISO 0x10 -#define SL811_USB_CTRL_SOF 0x20 -#define SL811_USB_CTRL_TOGGLE_1 0x40 -#define SL811_USB_CTRL_PREAMBLE 0x80 - -/* USB status register bits (addr 0x03 and addr 0x0B) */ -#define SL811_USB_STS_ACK 0x01 -#define SL811_USB_STS_ERROR 0x02 -#define SL811_USB_STS_TIMEOUT 0x04 -#define SL811_USB_STS_TOGGLE_1 0x08 -#define SL811_USB_STS_SETUP 0x10 -#define SL811_USB_STS_OVERFLOW 0x20 -#define SL811_USB_STS_NAK 0x40 -#define SL811_USB_STS_STALL 0x80 - -/* Control register 1 bits (addr 0x05) */ -#define SL811_CTRL1_SOF 0x01 -#define SL811_CTRL1_RESET 0x08 -#define SL811_CTRL1_JKSTATE 0x10 -#define SL811_CTRL1_SPEED_LOW 0x20 -#define SL811_CTRL1_SUSPEND 0x40 - -/* Interrut enable (addr 0x06) and interrupt status register bits (addr 0x0D) */ -#define SL811_INTR_DONE_A 0x01 -#define SL811_INTR_DONE_B 0x02 -#define SL811_INTR_SOF 0x10 -#define SL811_INTR_INSRMV 0x20 -#define SL811_INTR_DETECT 0x40 -#define SL811_INTR_NOTPRESENT 0x40 -#define SL811_INTR_SPEED_FULL 0x80 /* only in status reg */ - -/* HW rev and SOF lo register bits (addr 0x0E) */ -#define SL811_HWR_HWREV 0xF0 - -/* SOF counter and control reg 2 (addr 0x0F) */ -#define SL811_CTL2_SOFHI 0x3F -#define SL811_CTL2_DSWAP 0x40 -#define SL811_CTL2_HOST 0x80 - -/* Set up for 1-ms SOF time. */ -#define SL811_12M_LOW 0xE0 -#define SL811_12M_HI 0x2E - -#define SL811_DATA_START 0x10 -#define SL811_DATA_LIMIT 240 - -/* Requests: bRequest << 8 | bmRequestType */ -#define RH_GET_STATUS 0x0080 -#define RH_CLEAR_FEATURE 0x0100 -#define RH_SET_FEATURE 0x0300 -#define RH_SET_ADDRESS 0x0500 -#define RH_GET_DESCRIPTOR 0x0680 -#define RH_SET_DESCRIPTOR 0x0700 -#define RH_GET_CONFIGURATION 0x0880 -#define RH_SET_CONFIGURATION 0x0900 -#define RH_GET_STATE 0x0280 -#define RH_GET_INTERFACE 0x0A80 -#define RH_SET_INTERFACE 0x0B00 -#define RH_SYNC_FRAME 0x0C80 - - -#define PIDEP(pid, ep) (((pid) & 0x0f) << 4 | (ep)) - -#endif /* __UBOOT_SL811_H */ diff --git a/drivers/usb/host/utmi-armada100.c b/drivers/usb/host/utmi-armada100.c deleted file mode 100644 index 5d66e5881f3..00000000000 --- a/drivers/usb/host/utmi-armada100.c +++ /dev/null @@ -1,80 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * (C) Copyright 2012 - * eInfochips Ltd. <www.einfochips.com> - * Written-by: Ajay Bhargav <contact@8051projects.net> - * - * (C) Copyright 2009 - * Marvell Semiconductor <www.marvell.com> - */ - -#include <common.h> -#include <asm/io.h> -#include <usb.h> -#include <asm/arch/cpu.h> -#include <asm/arch/armada100.h> -#include <asm/arch/utmi-armada100.h> -#include <linux/delay.h> - -static int utmi_phy_init(void) -{ - struct armd1usb_phy_reg *phy_regs = - (struct armd1usb_phy_reg *)UTMI_PHY_BASE; - int timeout; - - setbits_le32(&phy_regs->utmi_ctrl, INPKT_DELAY_SOF | PLL_PWR_UP); - udelay(1000); - setbits_le32(&phy_regs->utmi_ctrl, PHY_PWR_UP); - - clrbits_le32(&phy_regs->utmi_pll, PLL_FBDIV_MASK | PLL_REFDIV_MASK); - setbits_le32(&phy_regs->utmi_pll, N_DIVIDER << PLL_FBDIV | M_DIVIDER); - - setbits_le32(&phy_regs->utmi_tx, PHSEL_VAL << CK60_PHSEL); - - /* Calibrate pll */ - timeout = 10000; - while (--timeout && ((readl(&phy_regs->utmi_pll) & PLL_READY) == 0)) - ; - if (!timeout) - return -1; - - udelay(200); - setbits_le32(&phy_regs->utmi_pll, VCOCAL_START); - udelay(400); - clrbits_le32(&phy_regs->utmi_pll, VCOCAL_START); - - udelay(200); - setbits_le32(&phy_regs->utmi_tx, RCAL_START); - udelay(400); - clrbits_le32(&phy_regs->utmi_tx, RCAL_START); - - timeout = 10000; - while (--timeout && ((readl(&phy_regs->utmi_pll) & PLL_READY) == 0)) - ; - if (!timeout) - return -1; - - return 0; -} - -/* - * Initialize USB host controller's UTMI Physical interface - */ -int utmi_init(void) -{ - struct armd1mpmu_registers *mpmu_regs = - (struct armd1mpmu_registers *)ARMD1_MPMU_BASE; - - struct armd1apmu_registers *apmu_regs = - (struct armd1apmu_registers *)ARMD1_APMU_BASE; - - /* Turn on 26Mhz ref clock for UTMI PLL */ - setbits_le32(&mpmu_regs->acgr, APB2_26M_EN | AP_26M); - - /* USB Clock reset */ - writel(USB_SPH_AXICLK_EN, &apmu_regs->usbcrc); - writel(USB_SPH_AXICLK_EN | USB_SPH_AXI_RST, &apmu_regs->usbcrc); - - /* Initialize UTMI transceiver */ - return utmi_phy_init(); -} |