summaryrefslogtreecommitdiff
path: root/drivers/usb
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb')
-rw-r--r--drivers/usb/cdns3/Makefile4
-rw-r--r--drivers/usb/cdns3/core.c6
-rw-r--r--drivers/usb/common/Makefile2
-rw-r--r--drivers/usb/dwc3/Makefile4
-rw-r--r--drivers/usb/dwc3/dwc3-generic.c6
-rw-r--r--drivers/usb/gadget/Makefile10
-rw-r--r--drivers/usb/gadget/f_sdp.c10
-rw-r--r--drivers/usb/gadget/udc/Makefile4
-rw-r--r--drivers/usb/host/Makefile6
-rw-r--r--drivers/usb/host/ehci-tegra.c136
-rw-r--r--drivers/usb/mtu3/mtu3_plat.c4
11 files changed, 142 insertions, 50 deletions
diff --git a/drivers/usb/cdns3/Makefile b/drivers/usb/cdns3/Makefile
index 18d7190755d..d6047856091 100644
--- a/drivers/usb/cdns3/Makefile
+++ b/drivers/usb/cdns3/Makefile
@@ -4,8 +4,8 @@ cdns3-y := core.o drd.o
obj-$(CONFIG_USB_CDNS3) += cdns3.o
-cdns3-$(CONFIG_$(SPL_)USB_CDNS3_GADGET) += gadget.o ep0.o
+cdns3-$(CONFIG_$(XPL_)USB_CDNS3_GADGET) += gadget.o ep0.o
-cdns3-$(CONFIG_$(SPL_)USB_CDNS3_HOST) += host.o
+cdns3-$(CONFIG_$(XPL_)USB_CDNS3_HOST) += host.o
obj-$(CONFIG_USB_CDNS3_TI) += cdns3-ti.o
diff --git a/drivers/usb/cdns3/core.c b/drivers/usb/cdns3/core.c
index cbe06a9e7b6..4cfd38ec245 100644
--- a/drivers/usb/cdns3/core.c
+++ b/drivers/usb/cdns3/core.c
@@ -149,7 +149,7 @@ static int cdns3_core_init_role(struct cdns3 *cdns)
dr_mode = best_dr_mode;
-#if defined(CONFIG_SPL_USB_HOST) || !defined(CONFIG_SPL_BUILD)
+#if defined(CONFIG_SPL_USB_HOST) || !defined(CONFIG_XPL_BUILD)
if (dr_mode == USB_DR_MODE_OTG || dr_mode == USB_DR_MODE_HOST) {
ret = cdns3_host_init(cdns);
if (ret) {
@@ -412,7 +412,7 @@ int cdns3_bind(struct udevice *parent)
switch (dr_mode) {
#if defined(CONFIG_SPL_USB_HOST) || \
- (!defined(CONFIG_SPL_BUILD) && defined(CONFIG_USB_HOST))
+ (!defined(CONFIG_XPL_BUILD) && defined(CONFIG_USB_HOST))
case USB_DR_MODE_HOST:
debug("%s: dr_mode: HOST\n", __func__);
driver = "cdns-usb3-host";
@@ -498,7 +498,7 @@ int dm_usb_gadget_handle_interrupts(struct udevice *dev)
#endif
#if defined(CONFIG_SPL_USB_HOST) || \
- (!defined(CONFIG_SPL_BUILD) && defined(CONFIG_USB_HOST))
+ (!defined(CONFIG_XPL_BUILD) && defined(CONFIG_USB_HOST))
static int cdns3_host_probe(struct udevice *dev)
{
struct cdns3_host_priv *priv = dev_get_priv(dev);
diff --git a/drivers/usb/common/Makefile b/drivers/usb/common/Makefile
index 2e9353b76a6..11cc4657a0f 100644
--- a/drivers/usb/common/Makefile
+++ b/drivers/usb/common/Makefile
@@ -3,7 +3,7 @@
# (C) Copyright 2016 Freescale Semiconductor, Inc.
#
-obj-$(CONFIG_$(SPL_)DM_USB) += common.o
+obj-$(CONFIG_$(XPL_)DM_USB) += common.o
obj-$(CONFIG_USB_ISP1760) += usb_urb.o
obj-$(CONFIG_USB_MUSB_HOST) += usb_urb.o
obj-$(CONFIG_USB_MUSB_GADGET) += usb_urb.o
diff --git a/drivers/usb/dwc3/Makefile b/drivers/usb/dwc3/Makefile
index a46b6824ab7..a085c9d4628 100644
--- a/drivers/usb/dwc3/Makefile
+++ b/drivers/usb/dwc3/Makefile
@@ -6,11 +6,11 @@ dwc3-y := core.o
obj-$(CONFIG_USB_DWC3_GADGET) += gadget.o ep0.o
-obj-$(CONFIG_$(SPL_)USB_DWC3_AM62) += dwc3-am62.o
+obj-$(CONFIG_$(XPL_)USB_DWC3_AM62) += dwc3-am62.o
obj-$(CONFIG_USB_DWC3_OMAP) += dwc3-omap.o
obj-$(CONFIG_USB_DWC3_MESON_G12A) += dwc3-meson-g12a.o
obj-$(CONFIG_USB_DWC3_MESON_GXL) += dwc3-meson-gxl.o
-obj-$(CONFIG_$(SPL_)USB_DWC3_GENERIC) += dwc3-generic.o
+obj-$(CONFIG_$(XPL_)USB_DWC3_GENERIC) += dwc3-generic.o
obj-$(CONFIG_USB_DWC3_UNIPHIER) += dwc3-uniphier.o
obj-$(CONFIG_USB_DWC3_LAYERSCAPE) += dwc3-layerscape.o
obj-$(CONFIG_USB_DWC3_PHY_OMAP) += ti_usb_phy.o
diff --git a/drivers/usb/dwc3/dwc3-generic.c b/drivers/usb/dwc3/dwc3-generic.c
index a9ba315463c..2ab41cbae45 100644
--- a/drivers/usb/dwc3/dwc3-generic.c
+++ b/drivers/usb/dwc3/dwc3-generic.c
@@ -246,12 +246,12 @@ static int dwc3_generic_host_probe(struct udevice *dev)
return rc;
rc = device_get_supply_regulator(dev, "vbus-supply", &priv->vbus_supply);
- if (rc)
+ if (rc && rc != -ENOSYS)
debug("%s: No vbus regulator found: %d\n", dev->name, rc);
- /* Only returns an error if regulator is valid and failed to enable due to a driver issue */
+ /* Does not return an error if regulator is invalid - but does so when DM_REGULATOR is disabled */
rc = regulator_set_enable_if_allowed(priv->vbus_supply, true);
- if (rc)
+ if (rc && rc != -ENOSYS)
return rc;
hccr = (struct xhci_hccr *)priv->gen_priv.base;
diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile
index da76b6524de..4bda224ff1a 100644
--- a/drivers/usb/gadget/Makefile
+++ b/drivers/usb/gadget/Makefile
@@ -3,11 +3,11 @@
# (C) Copyright 2000-2007
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-obj-$(CONFIG_$(SPL_TPL_)USB_GADGET) += epautoconf.o config.o usbstring.o
-obj-$(CONFIG_$(SPL_TPL_)USB_ETHER) += epautoconf.o config.o usbstring.o ether.o
-obj-$(CONFIG_$(SPL_TPL_)USB_ETH_RNDIS) += rndis.o
+obj-$(CONFIG_$(PHASE_)USB_GADGET) += epautoconf.o config.o usbstring.o
+obj-$(CONFIG_$(PHASE_)USB_ETHER) += epautoconf.o config.o usbstring.o ether.o
+obj-$(CONFIG_$(PHASE_)USB_ETH_RNDIS) += rndis.o
-ifdef CONFIG_SPL_BUILD
+ifdef CONFIG_XPL_BUILD
obj-$(CONFIG_SPL_USB_GADGET) += g_dnl.o
obj-$(CONFIG_SPL_DFU) += f_dfu.o
obj-$(CONFIG_SPL_USB_SDP_SUPPORT) += f_sdp.o
@@ -22,7 +22,7 @@ obj-$(CONFIG_USB_GADGET_DWC2_OTG) += dwc2_udc_otg.o
obj-$(CONFIG_USB_GADGET_DWC2_OTG_PHY) += dwc2_udc_otg_phy.o
obj-$(CONFIG_USB_GADGET_MAX3420) += max3420_udc.o
obj-$(CONFIG_USB_RENESAS_USBHS) += rcar/
-ifndef CONFIG_SPL_BUILD
+ifndef CONFIG_XPL_BUILD
obj-$(CONFIG_USB_GADGET_DOWNLOAD) += g_dnl.o
obj-$(CONFIG_USB_FUNCTION_THOR) += f_thor.o
obj-$(CONFIG_DFU_OVER_USB) += f_dfu.o
diff --git a/drivers/usb/gadget/f_sdp.c b/drivers/usb/gadget/f_sdp.c
index 5d62eb475d0..36934b1bcf7 100644
--- a/drivers/usb/gadget/f_sdp.c
+++ b/drivers/usb/gadget/f_sdp.c
@@ -411,7 +411,7 @@ static void sdp_rx_data_complete(struct usb_ep *ep, struct usb_request *req)
return;
}
-#ifndef CONFIG_SPL_BUILD
+#ifndef CONFIG_XPL_BUILD
env_set_hex("filesize", sdp->dnl_bytes);
#endif
printf("done\n");
@@ -736,7 +736,7 @@ static u32 sdp_jump_imxheader(void *address)
return 0;
}
-#ifdef CONFIG_SPL_BUILD
+#ifdef CONFIG_XPL_BUILD
static ulong sdp_load_read(struct spl_load_info *load, ulong sector,
ulong count, void *buf)
{
@@ -825,7 +825,7 @@ static int sdp_handle_in_ep(struct spl_image_info *spl_image,
/* If imx header fails, try some U-Boot specific headers */
if (status) {
-#ifdef CONFIG_SPL_BUILD
+#ifdef CONFIG_XPL_BUILD
if (IS_ENABLED(CONFIG_SPL_LOAD_IMX_CONTAINER))
sdp_func->jmp_address = (u32)search_container_header((ulong)sdp_func->jmp_address, sdp_func->dnl_bytes);
else if (IS_ENABLED(CONFIG_SPL_LOAD_FIT))
@@ -907,7 +907,7 @@ static void sdp_handle_out_ep(void)
}
}
-#ifndef CONFIG_SPL_BUILD
+#ifndef CONFIG_XPL_BUILD
int sdp_handle(struct udevice *udc)
#else
int spl_sdp_handle(struct udevice *udc, struct spl_image_info *spl_image,
@@ -928,7 +928,7 @@ int spl_sdp_handle(struct udevice *udc, struct spl_image_info *spl_image,
schedule();
dm_usb_gadget_handle_interrupts(udc);
-#ifdef CONFIG_SPL_BUILD
+#ifdef CONFIG_XPL_BUILD
flag = sdp_handle_in_ep(spl_image, bootdev);
#else
flag = sdp_handle_in_ep(NULL, NULL);
diff --git a/drivers/usb/gadget/udc/Makefile b/drivers/usb/gadget/udc/Makefile
index 467c566f6d3..4b6a8fdfeee 100644
--- a/drivers/usb/gadget/udc/Makefile
+++ b/drivers/usb/gadget/udc/Makefile
@@ -2,9 +2,9 @@
#
# USB peripheral controller drivers
-ifndef CONFIG_$(SPL_)DM_USB_GADGET
+ifndef CONFIG_$(XPL_)DM_USB_GADGET
obj-$(CONFIG_USB_DWC3_GADGET) += udc-core.o
endif
-obj-$(CONFIG_$(SPL_)DM_USB_GADGET) += udc-core.o
+obj-$(CONFIG_$(XPL_)DM_USB_GADGET) += udc-core.o
obj-y += udc-uclass.o
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index 8dad36f9369..792956e647a 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -3,13 +3,13 @@
# (C) Copyright 2000-2007
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-ifdef CONFIG_$(SPL_)DM_USB
+ifdef CONFIG_$(XPL_)DM_USB
obj-y += usb-uclass.o
obj-$(CONFIG_SANDBOX) += usb-sandbox.o
endif
-ifdef CONFIG_$(SPL_TPL_)USB_STORAGE
-obj-$(CONFIG_$(SPL_TPL_)BOOTSTD) += usb_bootdev.o
+ifdef CONFIG_$(PHASE_)USB_STORAGE
+obj-$(CONFIG_$(PHASE_)BOOTSTD) += usb_bootdev.o
endif
# ohci
diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c
index 343893b9f19..7c73eb66b60 100644
--- a/drivers/usb/host/ehci-tegra.c
+++ b/drivers/usb/host/ehci-tegra.c
@@ -66,9 +66,24 @@ enum usb_ctlr_type {
USB_CTRL_COUNT,
};
+struct tegra_utmip_config {
+ u32 hssync_start_delay;
+ u32 elastic_limit;
+ u32 idle_wait_delay;
+ u32 term_range_adj;
+ bool xcvr_setup_use_fuses;
+ u32 xcvr_setup;
+ u32 xcvr_lsfslew;
+ u32 xcvr_lsrslew;
+ u32 xcvr_hsslew;
+ u32 hssquelch_level;
+ u32 hsdiscon_level;
+};
+
/* Information about a USB port */
struct fdt_usb {
struct ehci_ctrl ehci;
+ struct tegra_utmip_config utmip_config;
struct usb_ctlr *reg; /* address of registers in physical memory */
unsigned utmi:1; /* 1 if port has external tranceiver, else 0 */
unsigned ulpi:1; /* 1 if port has external ULPI transceiver */
@@ -192,15 +207,6 @@ static const unsigned T210_usb_pll[CLOCK_OSC_FREQ_COUNT][PARAM_COUNT] = {
{ 0x028, 0x01, 0x01, 0x0, 0, 0x02, 0x2F, 0x08, 0x76, 65000, 5 }
};
-/* UTMIP Idle Wait Delay */
-static const u8 utmip_idle_wait_delay = 17;
-
-/* UTMIP Elastic limit */
-static const u8 utmip_elastic_limit = 16;
-
-/* UTMIP High Speed Sync Start Delay */
-static const u8 utmip_hs_sync_start_delay = 9;
-
struct fdt_usb_controller {
/* flag to determine whether controller supports hostpc register */
u32 has_hostpc:1;
@@ -377,6 +383,7 @@ static int init_utmi_usb_controller(struct fdt_usb *config,
u32 b_sess_valid_mask, val;
int loop_count;
const unsigned *timing;
+ struct tegra_utmip_config *utmip_config = &config->utmip_config;
struct usb_ctlr *usbctlr = config->reg;
struct clk_rst_ctlr *clkrst;
struct usb_ctlr *usb1ctlr;
@@ -463,16 +470,29 @@ static int init_utmi_usb_controller(struct fdt_usb *config,
/* Recommended PHY settings for EYE diagram */
val = readl(&usbctlr->utmip_xcvr_cfg0);
- clrsetbits_le32(&val, UTMIP_XCVR_SETUP_MASK,
- 0x4 << UTMIP_XCVR_SETUP_SHIFT);
- clrsetbits_le32(&val, UTMIP_XCVR_SETUP_MSB_MASK,
- 0x3 << UTMIP_XCVR_SETUP_MSB_SHIFT);
- clrsetbits_le32(&val, UTMIP_XCVR_HSSLEW_MSB_MASK,
- 0x8 << UTMIP_XCVR_HSSLEW_MSB_SHIFT);
+
+ if (!utmip_config->xcvr_setup_use_fuses) {
+ clrsetbits_le32(&val, UTMIP_XCVR_SETUP(~0),
+ UTMIP_XCVR_SETUP(utmip_config->xcvr_setup));
+ clrsetbits_le32(&val, UTMIP_XCVR_SETUP_MSB(~0),
+ UTMIP_XCVR_SETUP_MSB(utmip_config->xcvr_setup));
+ }
+
+ clrsetbits_le32(&val, UTMIP_XCVR_LSFSLEW(~0),
+ UTMIP_XCVR_LSFSLEW(utmip_config->xcvr_lsfslew));
+ clrsetbits_le32(&val, UTMIP_XCVR_LSRSLEW(~0),
+ UTMIP_XCVR_LSRSLEW(utmip_config->xcvr_lsrslew));
+
+ clrsetbits_le32(&val, UTMIP_XCVR_HSSLEW(~0),
+ UTMIP_XCVR_HSSLEW(utmip_config->xcvr_hsslew));
+ clrsetbits_le32(&val, UTMIP_XCVR_HSSLEW_MSB(~0),
+ UTMIP_XCVR_HSSLEW_MSB(utmip_config->xcvr_hsslew));
writel(val, &usbctlr->utmip_xcvr_cfg0);
+
clrsetbits_le32(&usbctlr->utmip_xcvr_cfg1,
UTMIP_XCVR_TERM_RANGE_ADJ_MASK,
- 0x7 << UTMIP_XCVR_TERM_RANGE_ADJ_SHIFT);
+ utmip_config->term_range_adj <<
+ UTMIP_XCVR_TERM_RANGE_ADJ_SHIFT);
/* Some registers can be controlled from USB1 only. */
if (config->periph_id != PERIPH_ID_USBD) {
@@ -485,9 +505,11 @@ static int init_utmi_usb_controller(struct fdt_usb *config,
val = readl(&usb1ctlr->utmip_bias_cfg0);
setbits_le32(&val, UTMIP_HSDISCON_LEVEL_MSB);
clrsetbits_le32(&val, UTMIP_HSDISCON_LEVEL_MASK,
- 0x1 << UTMIP_HSDISCON_LEVEL_SHIFT);
+ utmip_config->hsdiscon_level <<
+ UTMIP_HSDISCON_LEVEL_SHIFT);
clrsetbits_le32(&val, UTMIP_HSSQUELCH_LEVEL_MASK,
- 0x2 << UTMIP_HSSQUELCH_LEVEL_SHIFT);
+ utmip_config->hssquelch_level <<
+ UTMIP_HSSQUELCH_LEVEL_SHIFT);
writel(val, &usb1ctlr->utmip_bias_cfg0);
/* Miscellaneous setting mentioned in Programming Guide */
@@ -521,7 +543,11 @@ static int init_utmi_usb_controller(struct fdt_usb *config,
setbits_le32(&usbctlr->utmip_bat_chrg_cfg0, UTMIP_PD_CHRG);
clrbits_le32(&usbctlr->utmip_xcvr_cfg0, UTMIP_XCVR_LSBIAS_SE);
- setbits_le32(&usbctlr->utmip_spare_cfg0, FUSE_SETUP_SEL);
+
+ if (utmip_config->xcvr_setup_use_fuses)
+ setbits_le32(&usbctlr->utmip_spare_cfg0, FUSE_SETUP_SEL);
+ else
+ clrbits_le32(&usbctlr->utmip_spare_cfg0, FUSE_SETUP_SEL);
/*
* Configure the UTMIP_IDLE_WAIT and UTMIP_ELASTIC_LIMIT
@@ -535,15 +561,16 @@ static int init_utmi_usb_controller(struct fdt_usb *config,
/* Set PLL enable delay count and Crystal frequency count */
val = readl(&usbctlr->utmip_hsrx_cfg0);
clrsetbits_le32(&val, UTMIP_IDLE_WAIT_MASK,
- utmip_idle_wait_delay << UTMIP_IDLE_WAIT_SHIFT);
+ utmip_config->idle_wait_delay << UTMIP_IDLE_WAIT_SHIFT);
clrsetbits_le32(&val, UTMIP_ELASTIC_LIMIT_MASK,
- utmip_elastic_limit << UTMIP_ELASTIC_LIMIT_SHIFT);
+ utmip_config->elastic_limit << UTMIP_ELASTIC_LIMIT_SHIFT);
writel(val, &usbctlr->utmip_hsrx_cfg0);
/* Configure the UTMIP_HS_SYNC_START_DLY */
clrsetbits_le32(&usbctlr->utmip_hsrx_cfg1,
UTMIP_HS_SYNC_START_DLY_MASK,
- utmip_hs_sync_start_delay << UTMIP_HS_SYNC_START_DLY_SHIFT);
+ utmip_config->hssync_start_delay <<
+ UTMIP_HS_SYNC_START_DLY_SHIFT);
/* Preceed the crystal clock disable by >100ns delay. */
udelay(1);
@@ -763,6 +790,69 @@ static int fdt_decode_usb(struct udevice *dev, struct fdt_usb *config)
return 0;
}
+static void fdt_decode_usb_phy(struct udevice *dev)
+{
+ struct fdt_usb *priv = dev_get_priv(dev);
+ struct tegra_utmip_config *utmip_config = &priv->utmip_config;
+ u32 usb_phy_phandle;
+ ofnode usb_phy_node;
+ int ret;
+
+ ret = ofnode_read_u32(dev_ofnode(dev), "nvidia,phy", &usb_phy_phandle);
+ if (ret)
+ log_debug("%s: required usb phy node isn't provided\n", __func__);
+
+ usb_phy_node = ofnode_get_by_phandle(usb_phy_phandle);
+ if (!ofnode_valid(usb_phy_node) || !ofnode_is_enabled(usb_phy_node)) {
+ log_debug("%s: failed to find usb phy node or it is disabled\n", __func__);
+ utmip_config->xcvr_setup_use_fuses = true;
+ } else {
+ utmip_config->xcvr_setup_use_fuses =
+ ofnode_read_bool(usb_phy_node, "nvidia,xcvr-setup-use-fuses");
+ }
+
+ utmip_config->hssync_start_delay =
+ ofnode_read_u32_default(usb_phy_node,
+ "nvidia,hssync-start-delay", 0x9);
+
+ utmip_config->elastic_limit =
+ ofnode_read_u32_default(usb_phy_node,
+ "nvidia,elastic-limit", 0x10);
+
+ utmip_config->idle_wait_delay =
+ ofnode_read_u32_default(usb_phy_node,
+ "nvidia,idle-wait-delay", 0x11);
+
+ utmip_config->term_range_adj =
+ ofnode_read_u32_default(usb_phy_node,
+ "nvidia,term-range-adj", 0x7);
+
+ utmip_config->xcvr_lsfslew =
+ ofnode_read_u32_default(usb_phy_node,
+ "nvidia,xcvr-lsfslew", 0x0);
+
+ utmip_config->xcvr_lsrslew =
+ ofnode_read_u32_default(usb_phy_node,
+ "nvidia,xcvr-lsrslew", 0x3);
+
+ utmip_config->xcvr_hsslew =
+ ofnode_read_u32_default(usb_phy_node,
+ "nvidia,xcvr-hsslew", 0x8);
+
+ utmip_config->hssquelch_level =
+ ofnode_read_u32_default(usb_phy_node,
+ "nvidia,hssquelch-level", 0x2);
+
+ utmip_config->hsdiscon_level =
+ ofnode_read_u32_default(usb_phy_node,
+ "nvidia,hsdiscon-level", 0x1);
+
+ if (!utmip_config->xcvr_setup_use_fuses) {
+ ofnode_read_u32(usb_phy_node, "nvidia,xcvr-setup",
+ &utmip_config->xcvr_setup);
+ }
+}
+
int usb_common_init(struct fdt_usb *config, enum usb_init_type init)
{
int ret = 0;
@@ -850,6 +940,8 @@ static int ehci_usb_of_to_plat(struct udevice *dev)
priv->type = dev_get_driver_data(dev);
+ fdt_decode_usb_phy(dev);
+
return 0;
}
diff --git a/drivers/usb/mtu3/mtu3_plat.c b/drivers/usb/mtu3/mtu3_plat.c
index f8e14eabfb2..26fee141f6e 100644
--- a/drivers/usb/mtu3/mtu3_plat.c
+++ b/drivers/usb/mtu3/mtu3_plat.c
@@ -266,7 +266,7 @@ U_BOOT_DRIVER(mtu3_peripheral) = {
#endif
#if defined(CONFIG_SPL_USB_HOST) || \
- (!defined(CONFIG_SPL_BUILD) && defined(CONFIG_USB_HOST))
+ (!defined(CONFIG_XPL_BUILD) && defined(CONFIG_USB_HOST))
static int mtu3_host_probe(struct udevice *dev)
{
struct ssusb_mtk *ssusb = dev_to_ssusb(dev->parent);
@@ -334,7 +334,7 @@ static int mtu3_glue_bind(struct udevice *parent)
#endif
#if defined(CONFIG_SPL_USB_HOST) || \
- (!defined(CONFIG_SPL_BUILD) && defined(CONFIG_USB_HOST))
+ (!defined(CONFIG_XPL_BUILD) && defined(CONFIG_USB_HOST))
case USB_DR_MODE_HOST:
dev_dbg(parent, "%s: dr_mode: host\n", __func__);
driver = "mtu3-host";
generated by cgit v1.2.3 (git 2.0.4) at 2025-07-24 18:21:58 +0000