diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/Makefile | 19 | ||||
| -rw-r--r-- | drivers/ali512x.c | 423 | ||||
| -rw-r--r-- | drivers/ds1722.c | 142 | ||||
| -rw-r--r-- | drivers/eepro100.c | 2 | ||||
| -rw-r--r-- | drivers/mw_eeprom.c | 242 | ||||
| -rw-r--r-- | drivers/ti_pci1410a.c | 668 |
6 files changed, 1489 insertions, 7 deletions
diff --git a/drivers/Makefile b/drivers/Makefile index c28ed9f00a1..277d6f68c63 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -27,16 +27,23 @@ include $(TOPDIR)/config.mk LIB = libdrivers.a -OBJS = 3c589.o 5701rls.o at91rm9200_ether.o \ - bcm570x.o bcm570x_autoneg.o \ - cfb_console.o cs8900.o ct69000.o dc2114x.o \ +OBJS = 3c589.o 5701rls.o ali512x.o at91rm9200_ether.o \ + bcm570x.o bcm570x_autoneg.o cfb_console.o \ + cs8900.o ct69000.o dc2114x.o \ eepro100.o i8042.o i82365.o inca-ip_sw.o \ - lan91c96.o natsemi.o ns16550.o ns8382x.o ns87308.o \ + lan91c96.o natsemi.o \ + ns16550.o ns8382x.o ns87308.o \ pci.o pci_auto.o pci_indirect.o \ pcnet.o plb2800_eth.o \ s3c24x0_i2c.o sed13806.o serial.o \ - smc91111.o smiLynxEM.o sym53c8xx.o \ - tigon3.o w83c553f.o + smc91111.o smiLynxEM.o sym53c8xx.o \ + ti_pci1410a.o tigon3.o w83c553f.o + +## Disabled for now: +## cs8900.o ct69000.o dc2114x.o ds1722.o \ +## lan91c96.o mw_eeprom.o natsemi.o \ +## smc91111.o smiLynxEM.o spi_eeprom.o sym53c8xx.o \ +## all: $(LIB) diff --git a/drivers/ali512x.c b/drivers/ali512x.c new file mode 100644 index 00000000000..e52edd003d7 --- /dev/null +++ b/drivers/ali512x.c @@ -0,0 +1,423 @@ +/* + * (C) Copyright 2002 + * Daniel Engström, Omicron Ceti AB <daniel@omicron.se>. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * Based on sc520cdp.c from rolo 1.6: + *---------------------------------------------------------------------- + * (C) Copyright 2000 + * Sysgo Real-Time Solutions GmbH + * Klein-Winternheim, Germany + *---------------------------------------------------------------------- + */ + +#include <config.h> + +#ifdef CONFIG_ALI152X + +#include <common.h> +#include <asm/io.h> +#include <asm/ic/ali512x.h> + + +/* ALI M5123 Logical device numbers: + * 0 FDC + * 1 unused? + * 2 unused? + * 3 lpt + * 4 UART1 + * 5 UART2 + * 6 RTC + * 7 mouse/kbd + * 8 CIO + */ + +/* + ************************************************************ + * Some access primitives for the ALi chip: * + ************************************************************ + */ + +static void ali_write(u8 index, u8 value) +{ + /* write an arbirary register */ + outb(index, ALI_INDEX); + outb(value, ALI_DATA); +} + +#if 0 +static int ali_read(u8 index) +{ + outb(index, ALI_INDEX); + return inb(ALI_DATA); +} +#endif + +#define ALI_OPEN() \ + outb(0x51, ALI_INDEX); \ + outb(0x23, ALI_INDEX) + + +#define ALI_CLOSE() \ + outb(0xbb, ALI_INDEX) + +/* Select a logical device */ +#define ALI_SELDEV(dev) \ + ali_write(0x07, dev) + + +void ali512x_init(void) +{ + ALI_OPEN(); + + ali_write(0x02, 0x01); /* soft reset */ + ali_write(0x03, 0x03); /* disable access to CIOs */ + ali_write(0x22, 0x00); /* disable direct powerdown */ + ali_write(0x23, 0x00); /* disable auto powerdown */ + ali_write(0x24, 0x00); /* IR 8 is active hi, pin26 is PDIR */ + + ALI_CLOSE(); +} + +void ali512x_set_fdc(int enabled, u16 io, u8 irq, u8 dma_channel) +{ + ALI_OPEN(); + ALI_SELDEV(0); + + ali_write(0x30, enabled?1:0); + if (enabled) { + ali_write(0x60, io >> 8); + ali_write(0x61, io & 0xff); + ali_write(0x70, irq); + ali_write(0x74, dma_channel); + + /* AT mode, no drive swap */ + ali_write(0xf0, 0x08); + ali_write(0xf1, 0x00); + ali_write(0xf2, 0xff); + ali_write(0xf4, 0x00); + } + ALI_CLOSE(); +} + + +void ali512x_set_pp(int enabled, u16 io, u8 irq, u8 dma_channel) +{ + ALI_OPEN(); + ALI_SELDEV(3); + + ali_write(0x30, enabled?1:0); + if (enabled) { + ali_write(0x60, io >> 8); + ali_write(0x61, io & 0xff); + ali_write(0x70, irq); + ali_write(0x74, dma_channel); + + /* mode: EPP 1.9, ECP FIFO threshold = 7, IRQ active low */ + ali_write(0xf0, 0xbc); + /* 12 MHz, Burst DMA in ECP */ + ali_write(0xf1, 0x05); + } + ALI_CLOSE(); + +} + +void ali512x_set_uart(int enabled, int index, u16 io, u8 irq) +{ + ALI_OPEN(); + ALI_SELDEV(index?5:4); + + ali_write(0x30, enabled?1:0); + if (enabled) { + ali_write(0x60, io >> 8); + ali_write(0x61, io & 0xff); + ali_write(0x70, irq); + + ali_write(0xf0, 0x00); + ali_write(0xf1, 0x00); + + /* huh? write 0xf2 twice - a typo in rolo + * or some secret ali errata? Who knows? + */ + if (index) { + ali_write(0xf2, 0x00); + } + ali_write(0xf2, 0x0c); + } + ALI_CLOSE(); + +} + +void ali512x_set_uart2_irda(int enabled) +{ + ALI_OPEN(); + ALI_SELDEV(5); + + ali_write(0xf1, enabled?0x48:0x00); /* fullduplex IrDa */ + ALI_CLOSE(); + +} + +void ali512x_set_rtc(int enabled, u16 io, u8 irq) +{ + ALI_OPEN(); + ALI_SELDEV(6); + + ali_write(0x30, enabled?1:0); + if (enabled) { + ali_write(0x60, io >> 8); + ali_write(0x61, io & 0xff); + ali_write(0x70, irq); + + ali_write(0xf0, 0x00); + } + ALI_CLOSE(); +} + +void ali512x_set_kbc(int enabled, u8 kbc_irq, u8 mouse_irq) +{ + ALI_OPEN(); + ALI_SELDEV(7); + + ali_write(0x30, enabled?1:0); + if (enabled) { + ali_write(0x70, kbc_irq); + ali_write(0x72, mouse_irq); + + ali_write(0xf0, 0x00); + } + ALI_CLOSE(); +} + + +/* Common I/O + * + * (This descripotsion is base on several incompete sources + * since I have not been able to obtain any datasheet for the device + * there may be some mis-understandings burried in here. + * -- Daniel daniel@omicron.se) + * + * There are 22 CIO pins numbered + * 10-17 + * 20-25 + * 30-37 + * + * 20-24 are dedicated CIO pins, the other 17 are muliplexed with + * other functions. + * + * Secondary + * CIO Pin Function Decription + * ======================================================= + * CIO10 IRQIN1 Interrupt input 1? + * CIO11 IRQIN2 Interrupt input 2? + * CIO12 IRRX IrDa Receive + * CIO13 IRTX IrDa Transmit + * CIO14 P21 KBC P21 fucntion + * CIO15 P20 KBC P21 fucntion + * CIO16 I2C_CLK I2C Clock + * CIO17 I2C_DAT I2C Data + * + * CIO20 - + * CIO21 - + * CIO22 - + * CIO23 - + * CIO24 - + * CIO25 LOCK Keylock + * + * CIO30 KBC_CLK Keybaord Clock + * CIO31 CS0J General Chip Select decoder CS0J + * CIO32 CS1J General Chip Select decoder CS1J + * CIO33 ALT_KCLK Alternative Keyboard Clock + * CIO34 ALT_KDAT Alternative Keyboard Data + * CIO35 ALT_MCLK Alternative Mouse Clock + * CIO36 ALT_MDAT Alternative Mouse Data + * CIO37 ALT_KBC Alternative KBC select + * + * The CIO use an indirect address scheme. + * + * Reigster 3 in the SIO is used to select the index and data + * port addresses where the CIO I/O registers show up. + * The function selection registers are accessible under + * function SIO 8. + * + * SIO reigster 3 (CIO Address Selection) bit definitions: + * bit 7 CIO index and data registers enabled + * bit 1-0 CIO indirect registers port address select + * 0 index = 0xE0 data = 0xE1 + * 1 index = 0xE2 data = 0xE3 + * 2 index = 0xE4 data = 0xE5 + * 3 index = 0xEA data = 0xEB + * + * There are three CIO I/O register accessed via CIO index port and CIO data port + * 0x01 CIO 10-17 data + * 0x02 CIO 20-25 data (bits 7-6 unused) + * 0x03 CIO 30-37 data + * + * + * The pin function is accessed through normal + * SIO registers, each register have the same format: + * + * Bit Function Value + * 0 Input/output 1=input + * 1 Polarity of signal 1=inverted + * 2 Unused ?? + * 3 Function (normal or special) 1=special + * 7-4 Unused + * + * SIO REG + * 0xe0 CIO 10 Config + * 0xe1 CIO 11 Config + * 0xe2 CIO 12 Config + * 0xe3 CIO 13 Config + * 0xe4 CIO 14 Config + * 0xe5 CIO 15 Config + * 0xe6 CIO 16 Config + * 0xe7 CIO 16 Config + * + * 0xe8 CIO 20 Config + * 0xe9 CIO 21 Config + * 0xea CIO 22 Config + * 0xeb CIO 23 Config + * 0xec CIO 24 Config + * 0xed CIO 25 Config + * + * 0xf5 CIO 30 Config + * 0xf6 CIO 31 Config + * 0xf7 CIO 32 Config + * 0xf8 CIO 33 Config + * 0xf9 CIO 34 Config + * 0xfa CIO 35 Config + * 0xfb CIO 36 Config + * 0xfc CIO 37 Config + * + */ + +#define ALI_CIO_PORT_SEL 0x83 +#define ALI_CIO_INDEX 0xea +#define ALI_CIO_DATA 0xeb + +void ali512x_set_cio(int enabled) +{ + int i; + + ALI_OPEN(); + + if (enabled) { + ali_write(0x3, ALI_CIO_PORT_SEL); /* Enable CIO data register */ + } else { + ali_write(0x3, ALI_CIO_PORT_SEL & ~0x80); + } + + ALI_SELDEV(8); + + ali_write(0x30, enabled?1:0); + + /* set all pins to input to start with */ + for (i=0xe0;i<0xee;i++) { + ali_write(i, 1); + } + + for (i=0xf5;i<0xfe;i++) { + ali_write(i, 1); + } + + ALI_CLOSE(); +} + + +void ali512x_cio_function(int pin, int special, int inv, int input) +{ + u8 data; + u8 addr; + + /* valid pins are 10-17, 20-25 and 30-37 */ + if (pin >= 10 && pin <= 17) { + addr = 0xe0+(pin&7); + } else if (pin >= 20 && pin <= 25) { + addr = 0xe8+(pin&7); + } else if (pin >= 30 && pin <= 37) { + addr = 0xf5+(pin&7); + } else { + return; + } + + ALI_OPEN(); + + ALI_SELDEV(8); + + + data=0xf4; + if (special) { + data |= 0x08; + } else { + if (inv) { + data |= 0x02; + } + if (input) { + data |= 0x01; + } + } + + ali_write(addr, data); + + ALI_CLOSE(); +} + +void ali512x_cio_out(int pin, int value) +{ + u8 reg; + u8 data; + u8 bit; + + reg = pin/10; + bit = 1 << (pin%10); + + + outb(reg, ALI_CIO_INDEX); /* select I/O register */ + data = inb(ALI_CIO_DATA); + if (value) { + data |= bit; + } else { + data &= ~bit; + } + outb(data, ALI_CIO_DATA); +} + +int ali512x_cio_in(int pin) +{ + u8 reg; + u8 data; + u8 bit; + + /* valid pins are 10-17, 20-25 and 30-37 */ + reg = pin/10; + bit = 1 << (pin%10); + + + outb(reg, ALI_CIO_INDEX); /* select I/O register */ + data = inb(ALI_CIO_DATA); + + return data & bit; +} + + +#endif diff --git a/drivers/ds1722.c b/drivers/ds1722.c new file mode 100644 index 00000000000..34eb80ca23a --- /dev/null +++ b/drivers/ds1722.c @@ -0,0 +1,142 @@ + +#include <common.h> + +#include <ssi.h> + +#ifdef CONFIG_DS1722 + +static void ds1722_select(int dev) +{ + ssi_set_interface(4096, 0, 0, 0); + ssi_chip_select(0); + udelay(1); + ssi_chip_select(dev); + udelay(1); +} + + +u8 ds1722_read(int dev, int addr) +{ + u8 res; + + ds1722_select(dev); + + ssi_tx_byte(addr); + res = ssi_rx_byte(); + + ssi_chip_select(0); + + return res; +} + +void ds1722_write(int dev, int addr, u8 data) +{ + ds1722_select(dev); + + ssi_tx_byte(0x80|addr); + ssi_tx_byte(data); + + ssi_chip_select(0); +} + + +u16 ds1722_temp(int dev, int resolution) +{ + static int useconds[] = { + 75000, 150000, 300000, 600000, 1200000 + }; + char temp; + u16 res; + + + /* set up the desired resulotion ... */ + ds1722_write(dev, 0, 0xe0 | (resolution << 1)); + + /* wait while the chip measures the tremperature */ + udelay(useconds[resolution]); + + res = (temp = ds1722_read(dev, 2)) << 8; + + if (temp < 0) { + temp = (16 - (ds1722_read(dev, 1) >> 4)) & 0x0f; + } else { + temp = (ds1722_read(dev, 1) >> 4); + } + + switch (temp) { + case 0: + /* .0000 */ + break; + case 1: + /* .0625 */ + res |=1; + break; + case 2: + /* .1250 */ + res |=1; + break; + case 3: + /* .1875 */ + res |=2; + break; + case 4: + /* .2500 */ + res |=3; + break; + case 5: + /* .3125 */ + res |=3; + break; + case 6: + /* .3750 */ + res |=4; + break; + case 7: + /* .4375 */ + res |=4; + break; + case 8: + /* .5000 */ + res |=5; + break; + case 9: + /* .5625 */ + res |=6; + break; + case 10: + /* .6250 */ + res |=6; + break; + case 11: + /* .6875 */ + res |=7; + break; + case 12: + /* .7500 */ + res |=8; + break; + case 13: + /* .8125 */ + res |=8; + break; + case 14: + /* .8750 */ + res |=9; + break; + case 15: + /* .9375 */ + res |=9; + break; + } + return res; + +} + +int ds1722_probe(int dev) +{ + u16 temp = ds1722_temp(dev, DS1722_RESOLUTION_12BIT); + printf("%d.%d deg C\n\n", (char)(temp >> 8), temp & 0xff); + return 0; +} + +#endif diff --git a/drivers/eepro100.c b/drivers/eepro100.c index c8d07de8b6a..a0bb76da4d1 100644 --- a/drivers/eepro100.c +++ b/drivers/eepro100.c @@ -331,8 +331,8 @@ int eepro100_initialize (bd_t * bis) dev = (struct eth_device *) malloc (sizeof *dev); sprintf (dev->name, "i82559#%d", card_number); + dev->priv = (void *) devno; /* this have to come before bus_to_phys() */ dev->iobase = bus_to_phys (iobase); - dev->priv = (void *) devno; dev->init = eepro100_init; dev->halt = eepro100_halt; dev->send = eepro100_send; diff --git a/drivers/mw_eeprom.c b/drivers/mw_eeprom.c new file mode 100644 index 00000000000..30a51fa0517 --- /dev/null +++ b/drivers/mw_eeprom.c @@ -0,0 +1,242 @@ +/* Three-wire (MicroWire) serial eeprom driver (for 93C46 and compatibles) */ + +#include <common.h> +#include <ssi.h> + + +#ifdef CONFIG_MW_EEPROM + +/* + * Serial EEPROM opcodes, including start bit + */ +#define EEP_OPC_ERASE 0x7 /* 3-bit opcode */ +#define EEP_OPC_WRITE 0x5 /* 3-bit opcode */ +#define EEP_OPC_READ 0x6 /* 3-bit opcode */ + +#define EEP_OPC_ERASE_ALL 0x12 /* 5-bit opcode */ +#define EEP_OPC_ERASE_EN 0x13 /* 5-bit opcode */ +#define EEP_OPC_WRITE_ALL 0x11 /* 5-bit opcode */ +#define EEP_OPC_ERASE_DIS 0x10 /* 5-bit opcode */ + +static int addrlen; + +static void mw_eeprom_select(int dev) +{ + ssi_set_interface(2048, 0, 0, 0); + ssi_chip_select(0); + udelay(1); + ssi_chip_select(dev); + udelay(1); +} + +static int mw_eeprom_size(int dev) +{ + int x; + u16 res; + + mw_eeprom_select(dev); + ssi_tx_byte(EEP_OPC_READ); + + res = ssi_txrx_byte(0) << 8; + res |= ssi_rx_byte(); + for (x = 0; x < 16; x++) { + if (! (res & 0x8000)) { + break; + } + res <<= 1; + } + ssi_chip_select(0); + + return x; +} + +int mw_eeprom_erase_enable(int dev) +{ + mw_eeprom_select(dev); + ssi_tx_byte(EEP_OPC_ERASE_EN); + ssi_tx_byte(0); + udelay(1); + ssi_chip_select(0); + + return 0; +} + +int mw_eeprom_erase_disable(int dev) +{ + mw_eeprom_select(dev); + ssi_tx_byte(EEP_OPC_ERASE_DIS); + ssi_tx_byte(0); + udelay(1); + ssi_chip_select(0); + + return 0; +} + + +u32 mw_eeprom_read_word(int dev, int addr) +{ + u16 rcv; + u16 res; + int bits; + + mw_eeprom_select(dev); + ssi_tx_byte((EEP_OPC_READ << 5) | ((addr >> (addrlen - 5)) & 0x1f)); + rcv = ssi_txrx_byte(addr << (13 - addrlen)); + res = rcv << (16 - addrlen); + bits = 4 + addrlen; + + while (bits>0) { + rcv = ssi_rx_byte(); + if (bits > 7) { + res |= rcv << (bits - 8); + } else { + res |= rcv >> (8 - bits); + } + bits -= 8; + } + + ssi_chip_select(0); + + return res; +} + +int mw_eeprom_write_word(int dev, int addr, u16 data) +{ + u8 byte1=0; + u8 byte2=0; + + mw_eeprom_erase_enable(dev); + mw_eeprom_select(dev); + + switch (addrlen) { + case 6: + byte1 = EEP_OPC_WRITE >> 2; + byte2 = (EEP_OPC_WRITE << 6)&0xc0; + byte2 |= addr; + break; + case 7: + byte1 = EEP_OPC_WRITE >> 1; + byte2 = (EEP_OPC_WRITE << 7)&0x80; + byte2 |= addr; + break; + case 8: + byte1 = EEP_OPC_WRITE; + byte2 = addr; + break; + case 9: + byte1 = EEP_OPC_WRITE << 1; + byte1 |= addr >> 8; + byte2 = addr & 0xff; + break; + case 10: + byte1 = EEP_OPC_WRITE << 2; + byte1 |= addr >> 8; + byte2 = addr & 0xff; + break; + default: + printf("Unsupported number of address bits: %d\n", addrlen); + return -1; + + } + + ssi_tx_byte(byte1); + ssi_tx_byte(byte2); + ssi_tx_byte(data >> 8); + ssi_tx_byte(data & 0xff); + ssi_chip_select(0); + udelay(10000); /* Worst case */ + mw_eeprom_erase_disable(dev); + + return 0; +} + + +int mw_eeprom_write(int dev, int addr, u8 *buffer, int len) +{ + int done; + + done = 0; + if (addr & 1) { + u16 temp = mw_eeprom_read_word(dev, addr >> 1); + temp &= 0xff00; + temp |= buffer[0]; + + mw_eeprom_write_word(dev, addr >> 1, temp); + len--; + addr++; + buffer++; + done++; + } + + while (len <= 2) { + mw_eeprom_write_word(dev, addr >> 1, *(u16*)buffer); + len-=2; + addr+=2; + buffer+=2; + done+=2; + } + + if (len) { + u16 temp = mw_eeprom_read_word(dev, addr >> 1); + temp &= 0x00ff; + temp |= buffer[0] << 8; + + mw_eeprom_write_word(dev, addr >> 1, temp); + len--; + addr++; + buffer++; + done++; + } + + return done; +} + + + +int mw_eeprom_read(int dev, int addr, u8 *buffer, int len) +{ + int done; + + done = 0; + if (addr & 1) { + u16 temp = mw_eeprom_read_word(dev, addr >> 1); + buffer[0]= temp & 0xff; + + len--; + addr++; + buffer++; + done++; + } + + while (len <= 2) { + *(u16*)buffer = mw_eeprom_read_word(dev, addr >> 1); + len-=2; + addr+=2; + buffer+=2; + done+=2; + } + + if (len) { + u16 temp = mw_eeprom_read_word(dev, addr >> 1); + buffer[0] = temp >> 8; + + len--; + addr++; + buffer++; + done++; + } + + return done; +} + +int mw_eeprom_probe(int dev) +{ + addrlen = mw_eeprom_size(dev); + + if (addrlen < 6 || addrlen > 10) { + return -1; + } + return 0; +} + +#endif diff --git a/drivers/ti_pci1410a.c b/drivers/ti_pci1410a.c new file mode 100644 index 00000000000..a2b1a17f206 --- /dev/null +++ b/drivers/ti_pci1410a.c @@ -0,0 +1,668 @@ +/* + * (C) Copyright 2000-2002 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * (C) Copyright 2002 + * Daniel Engström, Omicron Ceti AB + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + ******************************************************************** + * + * Lots of code copied from: + * + * m8xx_pcmcia.c - Linux PCMCIA socket driver for the mpc8xx series. + * (C) 1999-2000 Magnus Damm <damm@bitsmart.com> + * + * "The ExCA standard specifies that socket controllers should provide + * two IO and five memory windows per socket, which can be independently + * configured and positioned in the host address space and mapped to + * arbitrary segments of card address space. " - David A Hinds. 1999 + * + * This controller does _not_ meet the ExCA standard. + * + * m8xx pcmcia controller brief info: + * + 8 windows (attrib, mem, i/o) + * + up to two slots (SLOT_A and SLOT_B) + * + inputpins, outputpins, event and mask registers. + * - no offset register. sigh. + * + * Because of the lacking offset register we must map the whole card. + * We assign each memory window PCMCIA_MEM_WIN_SIZE address space. + * Make sure there is (PCMCIA_MEM_WIN_SIZE * PCMCIA_MEM_WIN_NO + * * PCMCIA_SOCKETS_NO) bytes at PCMCIA_MEM_WIN_BASE. + * The i/o windows are dynamically allocated at PCMCIA_IO_WIN_BASE. + * They are maximum 64KByte each... + */ + + +#undef DEBUG /**/ + +/* + * PCMCIA support + */ +#include <common.h> +#include <command.h> +#include <config.h> +#include <pci.h> +#include <asm/io.h> + +#include <pcmcia.h> +#include <cmd_pcmcia.h> + +#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA) && defined(CONFIG_IDE_TI_CARDBUS) + +int pcmcia_on(int ide_base_bus); + +static int pcmcia_off(void); +static int hardware_disable(int slot); +static int hardware_enable(int slot); +static int voltage_set(int slot, int vcc, int vpp); +static void print_funcid(int func); +static void print_fixed(volatile uchar *p); +static int identify(volatile uchar *p); +static int check_ide_device(int slot, int ide_base_bus); + + +/* ------------------------------------------------------------------------- */ + + +const char *indent = "\t "; + +/* ------------------------------------------------------------------------- */ + + +int do_pinit(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +{ +#ifndef CFG_FISRT_PCMCIA_BUS +# define CFG_FISRT_PCMCIA_BUS 0 +#endif + + int rcode = 0; + + if (argc != 2) { + printf ("Usage: pinit {on | off}\n"); + return 1; + } + if (strcmp(argv[1],"on") == 0) { + rcode = pcmcia_on(CFG_FISRT_PCMCIA_BUS); + } else if (strcmp(argv[1],"off") == 0) { + rcode = pcmcia_off(); + } else { + printf ("Usage: pinit {on | off}\n"); + return 1; + } + + return rcode; +} + +/* ------------------------------------------------------------------------- */ + + +static struct pci_device_id supported[] = { + { PCI_VENDOR_ID_TI, 0xac50 }, /* Ti PCI1410A */ + { PCI_VENDOR_ID_TI, 0xac56 }, /* Ti PCI1510 */ + { } +}; + +static pci_dev_t devbusfn; +static u32 socket_base; +static u32 pcmcia_cis_ptr; + +int pcmcia_on(int ide_base_bus) +{ + u16 dev_id; + u32 socket_status; + int slot = 0; + int cis_len; + u16 io_base; + u16 io_len; + + /* + * Find the CardBus PCI device(s). + */ + if ((devbusfn = pci_find_devices(supported, 0)) < 0) { + printf("Ti CardBus: not found\n"); + return 1; + } + + pci_read_config_word(devbusfn, PCI_DEVICE_ID, &dev_id); + + if (dev_id == 0xac56) { + debug("Enable PCMCIA Ti PCI1510\n"); + } else { + debug("Enable PCMCIA Ti PCI1410A\n"); + } + + pcmcia_cis_ptr = CFG_PCMCIA_CIS_WIN; + cis_len = CFG_PCMCIA_CIS_WIN_SIZE; + + io_base = CFG_PCMCIA_IO_WIN; + io_len = CFG_PCMCIA_IO_WIN_SIZE; + + /* + * Setup the PCI device. + */ + pci_read_config_dword(devbusfn, PCI_BASE_ADDRESS_0, &socket_base); + socket_base &= ~0xf; + + socket_status = readl(socket_base+8); + if ((socket_status & 6) == 0) { + printf("Card Present: "); + + switch (socket_status & 0x3c00) { + + case 0x400: + printf("5V "); + break; + case 0x800: + printf("3.3V "); + break; + case 0xc00: + printf("3.3/5V "); + break; + default: + printf("unsupported Vcc "); + break; + } + switch (socket_status & 0x30) { + case 0x10: + printf("16bit PC-Card\n"); + break; + case 0x20: + printf("32bit CardBus Card\n"); + break; + default: + printf("8bit PC-Card\n"); + break; + } + } + + + writeb(0x41, socket_base + 0x806); /* Enable I/O window 0 and memory window 0 */ + writeb(0x0e, socket_base + 0x807); /* Reset I/O window options */ + + /* Careful: the linux yenta driver do not seem to reset the offset + * in the i/o windows, so leaving them non-zero is a problem */ + + writeb(io_base & 0xff, socket_base + 0x808); /* I/O window 0 base address */ + writeb(io_base>>8, socket_base + 0x809); + writeb((io_base + io_len - 1) & 0xff, socket_base + 0x80a); /* I/O window 0 end address */ + writeb((io_base + io_len - 1)>>8, socket_base + 0x80b); + writeb(0x00, socket_base + 0x836); /* I/O window 0 offset address 0x000 */ + writeb(0x00, socket_base + 0x837); + + + writeb((pcmcia_cis_ptr&0x000ff000) >> 12, + socket_base + 0x810); /* Memory window 0 start address bits 19-12 */ + writeb((pcmcia_cis_ptr&0x00f00000) >> 20, + socket_base + 0x811); /* Memory window 0 start address bits 23-20 */ + writeb(((pcmcia_cis_ptr+cis_len-1) & 0x000ff000) >> 12, + socket_base + 0x812); /* Memory window 0 end address bits 19-12*/ + writeb(((pcmcia_cis_ptr+cis_len-1) & 0x00f00000) >> 20, + socket_base + 0x813); /* Memory window 0 end address bits 23-20*/ + writeb(0x00, socket_base + 0x814); /* Memory window 0 offset bits 19-12 */ + writeb(0x40, socket_base + 0x815); /* Memory window 0 offset bits 23-20 and + * options (read/write, attribute access) */ + writeb(0x00, socket_base + 0x816); /* ExCA card-detect and general control */ + writeb(0x00, socket_base + 0x81e); /* ExCA global control (interrupt modes) */ + + writeb((pcmcia_cis_ptr & 0xff000000) >> 24, + socket_base + 0x840); /* Memory window address bits 31-24 */ + + + /* turn off voltage */ + if (voltage_set(slot, 0, 0)) { + return 1; + } + + /* Enable external hardware */ + if (hardware_enable(slot)) { + return 1; + } + + if (check_ide_device(slot, ide_base_bus)) { + return 1; + } + + return 0; +} + +/* ------------------------------------------------------------------------- */ + + +static int pcmcia_off (void) +{ + int slot = 0; + + writeb(0x00, socket_base + 0x806); /* disable all I/O and memory windows */ + + writeb(0x00, socket_base + 0x808); /* I/O window 0 base address */ + writeb(0x00, socket_base + 0x809); + writeb(0x00, socket_base + 0x80a); /* I/O window 0 end address */ + writeb(0x00, socket_base + 0x80b); + writeb(0x00, socket_base + 0x836); /* I/O window 0 offset address */ + writeb(0x00, socket_base + 0x837); + + writeb(0x00, socket_base + 0x80c); /* I/O window 1 base address */ + writeb(0x00, socket_base + 0x80d); + writeb(0x00, socket_base + 0x80e); /* I/O window 1 end address */ + writeb(0x00, socket_base + 0x80f); + writeb(0x00, socket_base + 0x838); /* I/O window 1 offset address */ + writeb(0x00, socket_base + 0x839); + + writeb(0x00, socket_base + 0x810); /* Memory window 0 start address */ + writeb(0x00, socket_base + 0x811); + writeb(0x00, socket_base + 0x812); /* Memory window 0 end address */ + writeb(0x00, socket_base + 0x813); + writeb(0x00, socket_base + 0x814); /* Memory window 0 offset */ + writeb(0x00, socket_base + 0x815); + + writeb(0xc0, socket_base + 0x840); /* Memory window 0 page address */ + + + /* turn off voltage */ + voltage_set(slot, 0, 0); + + /* disable external hardware */ + printf ("Shutdown and Poweroff Ti PCI1410A\n"); + hardware_disable(slot); + + return 0; +} + + +/* ------------------------------------------------------------------------- */ + + +#define MAX_TUPEL_SZ 512 +#define MAX_FEATURES 4 +int ide_devices_found; +static int check_ide_device(int slot, int ide_base_bus) +{ + volatile uchar *ident = NULL; + volatile uchar *feature_p[MAX_FEATURES]; + volatile uchar *p, *start; + int n_features = 0; + uchar func_id = ~0; + uchar code, len; + ushort config_base = 0; + int found = 0; + int i; + u32 socket_status; + + debug ("PCMCIA MEM: %08X\n", pcmcia_cis_ptr); + + socket_status = readl(socket_base+8); + + if ((socket_status & 6) != 0 || (socket_status & 0x20) != 0) { + printf("no card or CardBus card\n"); + return 1; + } + + start = p = (volatile uchar *) pcmcia_cis_ptr; + + while ((p - start) < MAX_TUPEL_SZ) { + + code = *p; p += 2; + + if (code == 0xFF) { /* End of chain */ + break; + } + + len = *p; p += 2; +#if defined(DEBUG) && (DEBUG > 1) + { + volatile uchar *q = p; + printf ("\nTuple code %02x length %d\n\tData:", + code, len); + + for (i = 0; i < len; ++i) { + printf (" %02x", *q); + q+= 2; + } + } +#endif /* DEBUG */ + switch (code) { + case CISTPL_VERS_1: + ident = p + 4; + break; + case CISTPL_FUNCID: + /* Fix for broken SanDisk which may have 0x80 bit set */ + func_id = *p & 0x7F; + break; + case CISTPL_FUNCE: + if (n_features < MAX_FEATURES) + feature_p[n_features++] = p; + break; + case CISTPL_CONFIG: + config_base = (*(p+6) << 8) + (*(p+4)); + debug ("\n## Config_base = %04x ###\n", config_base); + default: + break; + } + p += 2 * len; + } + + found = identify(ident); + + if (func_id != ((uchar)~0)) { + print_funcid (func_id); + + if (func_id == CISTPL_FUNCID_FIXED) + found = 1; + else + return 1; /* no disk drive */ + } + + for (i=0; i<n_features; ++i) { + print_fixed(feature_p[i]); + } + + if (!found) { + printf("unknown card type\n"); + return 1; + } + + /* select config index 1 */ + writeb(1, pcmcia_cis_ptr + config_base); + +#if 0 + printf("Confiuration Option Register: %02x\n", readb(pcmcia_cis_ptr + config_base)); + printf("Card Confiuration and Status Register: %02x\n", readb(pcmcia_cis_ptr + config_base + 2)); + printf("Pin Replacement Register Register: %02x\n", readb(pcmcia_cis_ptr + config_base + 4)); + printf("Socket and Copy Register: %02x\n", readb(pcmcia_cis_ptr + config_base + 6)); +#endif + ide_devices_found |= (1 << (slot+ide_base_bus)); + + return 0; +} + + + +static int voltage_set(int slot, int vcc, int vpp) +{ + u32 socket_control; + int reg=0; + + switch (slot) { + case 0: + reg = socket_base + 0x10; + break; + default: + return 1; + } + + socket_control = 0; + + + switch (vcc) { + case 50: + socket_control |= 0x20; + break; + case 33: + socket_control |= 0x30; + break; + case 0: + default: + } + + switch (vpp) { + case 120: + socket_control |= 0x1; + break; + case 50: + socket_control |= 0x2; + break; + case 33: + socket_control |= 0x3; + break; + case 0: + default: + } + + writel(socket_control, reg); + + debug ("voltage_set: Ti PCI1410A Slot %d, Vcc=%d.%d, Vpp=%d.%d\n", + slot, vcc/10, vcc%10, vpp/10, vpp%10); + + udelay(500); + return 0; +} + + +static int hardware_enable(int slot) +{ + u32 socket_status; + u16 brg_ctrl; + int is_82365sl; + + socket_status = readl(socket_base+8); + + if ((socket_status & 6) == 0) { + + switch (socket_status & 0x3c00) { + + case 0x400: + printf("5V "); + voltage_set(slot, 50, 0); + break; + case 0x800: + voltage_set(slot, 33, 0); + break; + case 0xc00: + voltage_set(slot, 33, 0); + break; + default: + voltage_set(slot, 0, 0); + break; + } + } else { + voltage_set(slot, 0, 0); + } + + pci_read_config_word(devbusfn, PCI_BRIDGE_CONTROL, &brg_ctrl); + brg_ctrl &= ~PCI_BRIDGE_CTL_BUS_RESET; + pci_write_config_word(devbusfn, PCI_BRIDGE_CONTROL, brg_ctrl); + is_82365sl = ((readb(socket_base+0x800) & 0x0f) == 2); + writeb(is_82365sl?0x90:0x98, socket_base+0x802); + writeb(0x67, socket_base+0x803); + udelay(100000); +#if 0 + printf("ExCA Id %02x, Card Status %02x, Power config %02x, Interrupt Config %02x, bridge control %04x %d\n", + readb(socket_base+0x800), readb(socket_base+0x801), + readb(socket_base+0x802), readb(socket_base+0x803), brg_ctrl, is_82365sl); +#endif + + return ((readb(socket_base+0x801)&0x6c)==0x6c)?0:1; +} + + + +static int hardware_disable(int slot) +{ + voltage_set(slot, 0, 0); + return 0; +} + +static void print_funcid(int func) +{ + puts(indent); + switch (func) { + case CISTPL_FUNCID_MULTI: + puts(" Multi-Function"); + break; + case CISTPL_FUNCID_MEMORY: + puts(" Memory"); + break; + case CISTPL_FUNCID_SERIAL: + puts(" Serial Port"); + break; + case CISTPL_FUNCID_PARALLEL: + puts(" Parallel Port"); + break; + case CISTPL_FUNCID_FIXED: + puts(" Fixed Disk"); + break; + case CISTPL_FUNCID_VIDEO: + puts(" Video Adapter"); + break; + case CISTPL_FUNCID_NETWORK: + puts(" Network Adapter"); + break; + case CISTPL_FUNCID_AIMS: + puts(" AIMS Card"); + break; + case CISTPL_FUNCID_SCSI: + puts(" SCSI Adapter"); + break; + default: + puts(" Unknown"); + break; + } + puts(" Card\n"); +} + +/* ------------------------------------------------------------------------- */ + +static void print_fixed(volatile uchar *p) +{ + if (p == NULL) + return; + + puts(indent); + + switch (*p) { + case CISTPL_FUNCE_IDE_IFACE: + { uchar iface = *(p+2); + + puts ((iface == CISTPL_IDE_INTERFACE) ? " IDE" : " unknown"); + puts (" interface "); + break; + } + case CISTPL_FUNCE_IDE_MASTER: + case CISTPL_FUNCE_IDE_SLAVE: + { + uchar f1 = *(p+2); + uchar f2 = *(p+4); + + puts((f1 & CISTPL_IDE_SILICON) ? " [silicon]" : " [rotating]"); + + if (f1 & CISTPL_IDE_UNIQUE) { + puts(" [unique]"); + } + + puts((f1 & CISTPL_IDE_DUAL) ? " [dual]" : " [single]"); + + if (f2 & CISTPL_IDE_HAS_SLEEP) { + puts(" [sleep]"); + } + + if (f2 & CISTPL_IDE_HAS_STANDBY) { + puts(" [standby]"); + } + + if (f2 & CISTPL_IDE_HAS_IDLE) { + puts(" [idle]"); + } + + if (f2 & CISTPL_IDE_LOW_POWER) { + puts(" [low power]"); + } + + if (f2 & CISTPL_IDE_REG_INHIBIT) { + puts(" [reg inhibit]"); + } + + if (f2 & CISTPL_IDE_HAS_INDEX) { + puts(" [index]"); + } + + if (f2 & CISTPL_IDE_IOIS16) { + puts(" [IOis16]"); + } + + break; + } + } + putc('\n'); +} + +/* ------------------------------------------------------------------------- */ + +#define MAX_IDENT_CHARS 64 +#define MAX_IDENT_FIELDS 4 + +static uchar *known_cards[] = { + "ARGOSY PnPIDE D5", + NULL +}; + +static int identify(volatile uchar *p) +{ + uchar id_str[MAX_IDENT_CHARS]; + uchar data; + uchar *t; + uchar **card; + int i, done; + + if (p == NULL) + return (0); /* Don't know */ + + t = id_str; + done =0; + + for (i=0; i<=4 && !done; ++i, p+=2) { + while ((data = *p) != '\0') { + if (data == 0xFF) { + done = 1; + break; + } + *t++ = data; + if (t == &id_str[MAX_IDENT_CHARS-1]) { + done = 1; + break; + } + p += 2; + } + if (!done) + *t++ = ' '; + } + *t = '\0'; + while (--t > id_str) { + if (*t == ' ') { + *t = '\0'; + } else { + break; + } + } + puts(id_str); + putc('\n'); + + for (card=known_cards; *card; ++card) { + debug ("## Compare against \"%s\"\n", *card); + if (strcmp(*card, id_str) == 0) { /* found! */ + debug ("## CARD FOUND ##\n"); + return 1; + } + } + + return 0; /* don't know */ +} + +#endif /* CONFIG_IDE_TI_CARDBUS */ |