diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/block/pata_bfin.h | 1 | ||||
| -rw-r--r-- | drivers/power/power_i2c.c | 2 | ||||
| -rw-r--r-- | drivers/rtc/mvrtc.h | 2 | ||||
| -rw-r--r-- | drivers/serial/serial_pl01x.c | 48 | ||||
| -rw-r--r-- | drivers/tpm/tpm.c | 2 | ||||
| -rw-r--r-- | drivers/tpm/tpm_tis_i2c.c | 2 |
6 files changed, 30 insertions, 27 deletions
diff --git a/drivers/block/pata_bfin.h b/drivers/block/pata_bfin.h index 2093cf06b4b..b678f60b2d7 100644 --- a/drivers/block/pata_bfin.h +++ b/drivers/block/pata_bfin.h @@ -43,7 +43,6 @@ struct ata_port { #define DRV_NAME "pata-bfin" #define DRV_VERSION "0.9" -#define __iomem #define ATA_REG_CTRL 0x0E #define ATA_REG_ALTSTATUS ATA_REG_CTRL diff --git a/drivers/power/power_i2c.c b/drivers/power/power_i2c.c index 594cd11725e..0dcf9fe9187 100644 --- a/drivers/power/power_i2c.c +++ b/drivers/power/power_i2c.c @@ -14,7 +14,7 @@ #include <linux/types.h> #include <power/pmic.h> #include <i2c.h> -#include <compiler.h> +#include <linux/compiler.h> int pmic_reg_write(struct pmic *p, u32 reg, u32 val) { diff --git a/drivers/rtc/mvrtc.h b/drivers/rtc/mvrtc.h index ebddc124c3d..424743c9906 100644 --- a/drivers/rtc/mvrtc.h +++ b/drivers/rtc/mvrtc.h @@ -13,7 +13,7 @@ #define _MVRTC_H_ #include <asm/arch/soc.h> -#include <compiler.h> +#include <linux/compiler.h> /* RTC registers */ struct mvrtc_registers { diff --git a/drivers/serial/serial_pl01x.c b/drivers/serial/serial_pl01x.c index 38dda910217..e1bf4965f92 100644 --- a/drivers/serial/serial_pl01x.c +++ b/drivers/serial/serial_pl01x.c @@ -72,30 +72,39 @@ static int pl01x_tstc(struct pl01x_regs *regs) static int pl01x_generic_serial_init(struct pl01x_regs *regs, enum pl01x_type type) { - unsigned int lcr; - + switch (type) { + case TYPE_PL010: + /* disable everything */ + writel(0, ®s->pl010_cr); + break; + case TYPE_PL011: #ifdef CONFIG_PL011_SERIAL_FLUSH_ON_INIT - if (type == TYPE_PL011) { /* Empty RX fifo if necessary */ if (readl(®s->pl011_cr) & UART_PL011_CR_UARTEN) { while (!(readl(®s->fr) & UART_PL01x_FR_RXFE)) readl(®s->dr); } - } #endif + /* disable everything */ + writel(0, ®s->pl011_cr); + break; + default: + return -EINVAL; + } - /* First, disable everything */ - writel(0, ®s->pl010_cr); + return 0; +} - /* Set the UART to be 8 bits, 1 stop bit, no parity, fifo enabled */ +static int set_line_control(struct pl01x_regs *regs) +{ + unsigned int lcr; + /* + * Internal update of baud rate register require line + * control register write + */ lcr = UART_PL011_LCRH_WLEN_8 | UART_PL011_LCRH_FEN; - writel(lcr, ®s->pl011_lcrh); - - switch (type) { - case TYPE_PL010: - break; - case TYPE_PL011: { #ifdef CONFIG_PL011_SERIAL_RLCR + { int i; /* @@ -107,15 +116,9 @@ static int pl01x_generic_serial_init(struct pl01x_regs *regs, writel(lcr, ®s->fr); writel(lcr, ®s->pl011_rlcr); - /* lcrh needs to be set again for change to be effective */ - writel(lcr, ®s->pl011_lcrh); -#endif - break; - } - default: - return -EINVAL; } - +#endif + writel(lcr, ®s->pl011_lcrh); return 0; } @@ -175,6 +178,7 @@ static int pl01x_generic_setbrg(struct pl01x_regs *regs, enum pl01x_type type, writel(divider, ®s->pl011_ibrd); writel(fraction, ®s->pl011_fbrd); + set_line_control(regs); /* Finally, enable the UART */ writel(UART_PL011_CR_UARTEN | UART_PL011_CR_TXE | UART_PL011_CR_RXE | UART_PL011_CR_RTS, ®s->pl011_cr); @@ -201,7 +205,7 @@ static void pl01x_serial_init_baud(int baudrate) base_regs = (struct pl01x_regs *)port[CONFIG_CONS_INDEX]; pl01x_generic_serial_init(base_regs, pl01x_type); - pl01x_generic_setbrg(base_regs, TYPE_PL010, clock, baudrate); + pl01x_generic_setbrg(base_regs, pl01x_type, clock, baudrate); } /* diff --git a/drivers/tpm/tpm.c b/drivers/tpm/tpm.c index bc0f9645b59..31761ec3381 100644 --- a/drivers/tpm/tpm.c +++ b/drivers/tpm/tpm.c @@ -34,7 +34,7 @@ #include <config.h> #include <common.h> -#include <compiler.h> +#include <linux/compiler.h> #include <fdtdec.h> #include <i2c.h> #include <tpm.h> diff --git a/drivers/tpm/tpm_tis_i2c.c b/drivers/tpm/tpm_tis_i2c.c index 2dd8501f92d..c1bbed4eb58 100644 --- a/drivers/tpm/tpm_tis_i2c.c +++ b/drivers/tpm/tpm_tis_i2c.c @@ -38,7 +38,7 @@ #include <common.h> #include <fdtdec.h> -#include <compiler.h> +#include <linux/compiler.h> #include <i2c.h> #include <tpm.h> #include <asm-generic/errno.h> |