diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/i2c/Kconfig | 9 | ||||
| -rw-r--r-- | drivers/i2c/Makefile | 4 | ||||
| -rw-r--r-- | drivers/net/rtl8169.c | 22 | ||||
| -rw-r--r-- | drivers/pci/Kconfig | 13 | ||||
| -rw-r--r-- | drivers/pci/Makefile | 2 | ||||
| -rw-r--r-- | drivers/pci/pcie_plda_common.c | 116 | ||||
| -rw-r--r-- | drivers/pci/pcie_plda_common.h | 118 | ||||
| -rw-r--r-- | drivers/pci/pcie_starfive_jh7110.c | 317 |
8 files changed, 589 insertions, 12 deletions
diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig index 5e81698143a..4c76fd7e415 100644 --- a/drivers/i2c/Kconfig +++ b/drivers/i2c/Kconfig @@ -231,6 +231,15 @@ config SYS_I2C_DW controller is used in various SoCs, e.g. the ST SPEAr, Altera SoCFPGA, Synopsys ARC700 and some Intel x86 SoCs. +config SYS_I2C_DW_PCI + bool "Designware PCI I2C Controller" + depends on SYS_I2C_DW && PCI && ACPIGEN + default y + help + Say yes here to select the Designware PCI I2C Host Controller. + This PCI I2C controller is the base on Desigware I2C host + controller. + config SYS_I2C_AST2600 bool "AST2600 I2C Controller" depends on DM_I2C && ARCH_ASPEED diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile index 99545df2e55..d5b85f398db 100644 --- a/drivers/i2c/Makefile +++ b/drivers/i2c/Makefile @@ -18,9 +18,7 @@ obj-$(CONFIG_SYS_I2C_CADENCE) += i2c-cdns.o obj-$(CONFIG_SYS_I2C_CA) += i2c-cortina.o obj-$(CONFIG_SYS_I2C_DAVINCI) += davinci_i2c.o obj-$(CONFIG_SYS_I2C_DW) += designware_i2c.o -ifdef CONFIG_PCI -obj-$(CONFIG_SYS_I2C_DW) += designware_i2c_pci.o -endif +obj-$(CONFIG_SYS_I2C_DW_PCI) += designware_i2c_pci.o obj-$(CONFIG_SYS_I2C_FSL) += fsl_i2c.o obj-$(CONFIG_SYS_I2C_IHS) += ihs_i2c.o obj-$(CONFIG_SYS_I2C_INTEL) += intel_i2c.o diff --git a/drivers/net/rtl8169.c b/drivers/net/rtl8169.c index 2276a465e78..963702777c2 100644 --- a/drivers/net/rtl8169.c +++ b/drivers/net/rtl8169.c @@ -96,12 +96,12 @@ static int media[MAX_UNITS] = { -1, -1, -1, -1, -1, -1, -1, -1 }; #define TX_TIMEOUT (6*HZ) /* write/read MMIO register. Notice: {read,write}[wl] do the necessary swapping */ -#define RTL_W8(reg, val8) writeb((val8), ioaddr + (reg)) -#define RTL_W16(reg, val16) writew((val16), ioaddr + (reg)) -#define RTL_W32(reg, val32) writel((val32), ioaddr + (reg)) -#define RTL_R8(reg) readb(ioaddr + (reg)) -#define RTL_R16(reg) readw(ioaddr + (reg)) -#define RTL_R32(reg) readl(ioaddr + (reg)) +#define RTL_W8(reg, val8) writeb((val8), (void *)(ioaddr + (reg))) +#define RTL_W16(reg, val16) writew((val16), (void *)(ioaddr + (reg))) +#define RTL_W32(reg, val32) writel((val32), (void *)(ioaddr + (reg))) +#define RTL_R8(reg) readb((void *)(ioaddr + (reg))) +#define RTL_R16(reg) readw((void *)(ioaddr + (reg))) +#define RTL_R32(reg) readl((void *)(ioaddr + (reg))) #define bus_to_phys(a) pci_mem_to_phys((pci_dev_t)(unsigned long)dev->priv, \ (pci_addr_t)(unsigned long)a) @@ -311,10 +311,12 @@ static unsigned char rxdata[RX_BUF_LEN]; * * This can be fixed by defining CONFIG_SYS_NONCACHED_MEMORY which will cause * the driver to allocate descriptors from a pool of non-cached memory. + * + * Hardware maintain D-cache coherency in RISC-V architecture. */ #if RTL8169_DESC_SIZE < ARCH_DMA_MINALIGN #if !defined(CONFIG_SYS_NONCACHED_MEMORY) && \ - !CONFIG_IS_ENABLED(SYS_DCACHE_OFF) && !defined(CONFIG_X86) + !CONFIG_IS_ENABLED(SYS_DCACHE_OFF) && !defined(CONFIG_X86) && !defined(CONFIG_RISCV) #warning cache-line size is larger than descriptor size #endif #endif @@ -351,10 +353,11 @@ static const unsigned int rtl8169_rx_config = (RX_FIFO_THRESH << RxCfgFIFOShift) | (RX_DMA_BURST << RxCfgDMAShift); static struct pci_device_id supported[] = { + { PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8125) }, + { PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8161) }, { PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8167) }, { PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8168) }, { PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8169) }, - { PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8125) }, {} }; @@ -1049,8 +1052,9 @@ static int rtl8169_eth_probe(struct udevice *dev) int ret; switch (pplat->device) { - case 0x8168: case 0x8125: + case 0x8161: + case 0x8168: region = 2; break; default: diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig index 93e6f500000..a0bf44d38a9 100644 --- a/drivers/pci/Kconfig +++ b/drivers/pci/Kconfig @@ -393,4 +393,17 @@ config PCIE_XILINX_NWL Say 'Y' here if you want support for Xilinx / AMD NWL PCIe controller as Root Port. +config PCIE_PLDA_COMMON + bool + +config PCIE_STARFIVE_JH7110 + bool "Enable Starfive JH7110 PCIe driver" + select PCIE_PLDA_COMMON + imply STARFIVE_JH7110 + imply CLK_JH7110 + imply RESET_JH7110 + help + Say Y here if you want to enable PLDA XpressRich PCIe controller + support on StarFive JH7110 SoC. + endif diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile index 11f60c6991d..a712a317a39 100644 --- a/drivers/pci/Makefile +++ b/drivers/pci/Makefile @@ -50,3 +50,5 @@ obj-$(CONFIG_PCIE_OCTEON) += pcie_octeon.o obj-$(CONFIG_PCIE_DW_SIFIVE) += pcie_dw_sifive.o obj-$(CONFIG_PCIE_UNIPHIER) += pcie_uniphier.o obj-$(CONFIG_PCIE_XILINX_NWL) += pcie-xilinx-nwl.o +obj-$(CONFIG_PCIE_PLDA_COMMON) += pcie_plda_common.o +obj-$(CONFIG_PCIE_STARFIVE_JH7110) += pcie_starfive_jh7110.o diff --git a/drivers/pci/pcie_plda_common.c b/drivers/pci/pcie_plda_common.c new file mode 100644 index 00000000000..005b92616a7 --- /dev/null +++ b/drivers/pci/pcie_plda_common.c @@ -0,0 +1,116 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * PLDA XpressRich PCIe host controller common functions. + * + * Copyright (C) 2023 StarFive Technology Co., Ltd. + * + */ + +#include <common.h> +#include <clk.h> +#include <dm.h> +#include <pci.h> +#include <pci_ids.h> +#include <asm/global_data.h> +#include <asm/io.h> +#include <dm/device_compat.h> +#include <linux/delay.h> +#include <linux/iopoll.h> +#include "pcie_plda_common.h" + +static bool plda_pcie_addr_valid(struct pcie_plda *plda, pci_dev_t bdf) +{ + /* + * Single device limitation. + * PCIe controller contain HW issue that secondary bus of + * host bridge emumerate duplicate devices. + * Only can access device 0 in secondary bus. + */ + if (PCI_BUS(bdf) == plda->sec_busno && PCI_DEV(bdf) > 0) + return false; + + return true; +} + +static int plda_pcie_conf_address(const struct udevice *udev, pci_dev_t bdf, + uint offset, void **paddr) +{ + struct pcie_plda *priv = dev_get_priv(udev); + int where = PCIE_ECAM_OFFSET(PCI_BUS(bdf), PCI_DEV(bdf), + PCI_FUNC(bdf), offset); + + if (!plda_pcie_addr_valid(priv, bdf)) + return -ENODEV; + + *paddr = (void *)(priv->cfg_base + where); + return 0; +} + +int plda_pcie_config_read(const struct udevice *udev, pci_dev_t bdf, + uint offset, ulong *valuep, + enum pci_size_t size) +{ + return pci_generic_mmap_read_config(udev, plda_pcie_conf_address, + bdf, offset, valuep, size); +} + +int plda_pcie_config_write(struct udevice *udev, pci_dev_t bdf, + uint offset, ulong value, + enum pci_size_t size) +{ + struct pcie_plda *priv = dev_get_priv(udev); + int ret; + + ret = pci_generic_mmap_write_config(udev, plda_pcie_conf_address, + bdf, offset, value, size); + + /* record secondary bus number */ + if (!ret && PCI_BUS(bdf) == dev_seq(udev) && + PCI_DEV(bdf) == 0 && PCI_FUNC(bdf) == 0 && + (offset == PCI_SECONDARY_BUS || + (offset == PCI_PRIMARY_BUS && size != PCI_SIZE_8))) { + priv->sec_busno = + ((offset == PCI_PRIMARY_BUS) ? (value >> 8) : value) & 0xff; + debug("Secondary bus number was changed to %d\n", + priv->sec_busno); + } + return ret; +} + +int plda_pcie_set_atr_entry(struct pcie_plda *plda, phys_addr_t src_addr, + phys_addr_t trsl_addr, phys_size_t window_size, + int trsl_param) +{ + void __iomem *base = + plda->reg_base + XR3PCI_ATR_AXI4_SLV0; + + /* Support AXI4 Slave 0 Address Translation Tables 0-7. */ + if (plda->atr_table_num >= XR3PCI_ATR_MAX_TABLE_NUM) { + dev_err(plda->dev, "ATR table number %d exceeds max num\n", + plda->atr_table_num); + return -EINVAL; + } + base += XR3PCI_ATR_TABLE_OFFSET * plda->atr_table_num; + plda->atr_table_num++; + + /* + * X3PCI_ATR_SRC_ADDR_LOW: + * - bit 0: enable entry, + * - bits 1-6: ATR window size: total size in bytes: 2^(ATR_WSIZE + 1) + * - bits 7-11: reserved + * - bits 12-31: start of source address + */ + writel((lower_32_bits(src_addr) & XR3PCI_ATR_SRC_ADDR_MASK) | + (fls(window_size) - 1) << XR3PCI_ATR_SRC_WIN_SIZE_SHIFT | 1, + base + XR3PCI_ATR_SRC_ADDR_LOW); + writel(upper_32_bits(src_addr), base + XR3PCI_ATR_SRC_ADDR_HIGH); + writel((lower_32_bits(trsl_addr) & XR3PCI_ATR_TRSL_ADDR_MASK), + base + XR3PCI_ATR_TRSL_ADDR_LOW); + writel(upper_32_bits(trsl_addr), base + XR3PCI_ATR_TRSL_ADDR_HIGH); + writel(trsl_param, base + XR3PCI_ATR_TRSL_PARAM); + + dev_dbg(plda->dev, "ATR entry: 0x%010llx %s 0x%010llx [0x%010llx] (param: 0x%06x)\n", + src_addr, (trsl_param & XR3PCI_ATR_TRSL_DIR) ? "<-" : "->", + trsl_addr, (u64)window_size, trsl_param); + return 0; +} diff --git a/drivers/pci/pcie_plda_common.h b/drivers/pci/pcie_plda_common.h new file mode 100644 index 00000000000..409949f5342 --- /dev/null +++ b/drivers/pci/pcie_plda_common.h @@ -0,0 +1,118 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright (C) 2023 StarFive Technology Co., Ltd. + * Author: Minda Chen <minda.chen@starfivetech.com> + * + */ + +#ifndef PCIE_PLDA_COMMON_H +#define PCIE_PLDA_COMMON_H + +#define GEN_SETTINGS 0x80 +#define PCIE_PCI_IDS 0x9C +#define PCIE_WINROM 0xFC +#define PMSG_SUPPORT_RX 0x3F0 +#define PCI_MISC 0xB4 + +#define PLDA_EP_ENABLE 0 +#define PLDA_RP_ENABLE 1 + +#define IDS_CLASS_CODE_SHIFT 8 + +#define PREF_MEM_WIN_64_SUPPORT BIT(3) +#define PMSG_LTR_SUPPORT BIT(2) +#define PLDA_FUNCTION_DIS BIT(15) +#define PLDA_FUNC_NUM 4 +#define PLDA_PHY_FUNC_SHIFT 9 + +#define XR3PCI_ATR_AXI4_SLV0 0x800 +#define XR3PCI_ATR_SRC_ADDR_LOW 0x0 +#define XR3PCI_ATR_SRC_ADDR_HIGH 0x4 +#define XR3PCI_ATR_TRSL_ADDR_LOW 0x8 +#define XR3PCI_ATR_TRSL_ADDR_HIGH 0xc +#define XR3PCI_ATR_TRSL_PARAM 0x10 +#define XR3PCI_ATR_TABLE_OFFSET 0x20 +#define XR3PCI_ATR_MAX_TABLE_NUM 8 + +#define XR3PCI_ATR_SRC_WIN_SIZE_SHIFT 1 +#define XR3PCI_ATR_SRC_ADDR_MASK GENMASK(31, 12) +#define XR3PCI_ATR_TRSL_ADDR_MASK GENMASK(31, 12) +#define XR3PCI_ATR_TRSL_DIR BIT(22) +/* IDs used in the XR3PCI_ATR_TRSL_PARAM */ +#define XR3PCI_ATR_TRSLID_PCIE_MEMORY 0x0 +#define XR3PCI_ATR_TRSLID_PCIE_CONFIG 0x1 + +/** + * struct pcie_plda - PLDA PCIe controller state + * + * @reg_base: The base address of controller register space + * @cfg_base: The base address of configuration space + * @cfg_size: The size of configuration space + * @sec_busno: Secondary bus number. + * @atr_table_num: Total ATR table numbers. + */ +struct pcie_plda { + struct udevice *dev; + void __iomem *reg_base; + void __iomem *cfg_base; + phys_size_t cfg_size; + int sec_busno; + int atr_table_num; +}; + +int plda_pcie_config_read(const struct udevice *udev, pci_dev_t bdf, + uint offset, ulong *valuep, + enum pci_size_t size); +int plda_pcie_config_write(struct udevice *udev, pci_dev_t bdf, + uint offset, ulong value, + enum pci_size_t size); +int plda_pcie_set_atr_entry(struct pcie_plda *plda, phys_addr_t src_addr, + phys_addr_t trsl_addr, phys_size_t window_size, + int trsl_param); + +static inline void plda_pcie_enable_root_port(struct pcie_plda *plda) +{ + u32 value; + + value = readl(plda->reg_base + GEN_SETTINGS); + value |= PLDA_RP_ENABLE; + writel(value, plda->reg_base + GEN_SETTINGS); +} + +static inline void plda_pcie_set_standard_class(struct pcie_plda *plda) +{ + u32 value; + + value = readl(plda->reg_base + PCIE_PCI_IDS); + value &= 0xff; + value |= (PCI_CLASS_BRIDGE_PCI_NORMAL << IDS_CLASS_CODE_SHIFT); + writel(value, plda->reg_base + PCIE_PCI_IDS); +} + +static inline void plda_pcie_set_pref_win_64bit(struct pcie_plda *plda) +{ + u32 value; + + value = readl(plda->reg_base + PCIE_WINROM); + value |= PREF_MEM_WIN_64_SUPPORT; + writel(value, plda->reg_base + PCIE_WINROM); +} + +static inline void plda_pcie_disable_ltr(struct pcie_plda *plda) +{ + u32 value; + + value = readl(plda->reg_base + PMSG_SUPPORT_RX); + value &= ~PMSG_LTR_SUPPORT; + writel(value, plda->reg_base + PMSG_SUPPORT_RX); +} + +static inline void plda_pcie_disable_func(struct pcie_plda *plda) +{ + u32 value; + + value = readl(plda->reg_base + PCI_MISC); + value |= PLDA_FUNCTION_DIS; + writel(value, plda->reg_base + PCI_MISC); +} +#endif diff --git a/drivers/pci/pcie_starfive_jh7110.c b/drivers/pci/pcie_starfive_jh7110.c new file mode 100644 index 00000000000..903a544d37f --- /dev/null +++ b/drivers/pci/pcie_starfive_jh7110.c @@ -0,0 +1,317 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * StarFive PLDA PCIe host controller driver + * + * Copyright (C) 2023 StarFive Technology Co., Ltd. + * Author: Mason Huo <mason.huo@starfivetech.com> + * + */ + +#include <common.h> +#include <clk.h> +#include <dm.h> +#include <pci.h> +#include <pci_ids.h> +#include <power-domain.h> +#include <regmap.h> +#include <reset.h> +#include <syscon.h> +#include <asm/global_data.h> +#include <asm/io.h> +#include <asm-generic/gpio.h> +#include <dm/device_compat.h> +#include <dm/pinctrl.h> +#include <linux/delay.h> +#include <linux/iopoll.h> +#include "pcie_plda_common.h" + +/* system control */ +#define STG_SYSCON_K_RP_NEP_MASK BIT(8) +#define STG_SYSCON_AXI4_SLVL_ARFUNC_MASK GENMASK(22, 8) +#define STG_SYSCON_AXI4_SLVL_ARFUNC_SHIFT 8 +#define STG_SYSCON_AXI4_SLVL_AWFUNC_MASK GENMASK(14, 0) +#define STG_SYSCON_CLKREQ_MASK BIT(22) +#define STG_SYSCON_CKREF_SRC_SHIFT 18 +#define STG_SYSCON_CKREF_SRC_MASK GENMASK(19, 18) + +DECLARE_GLOBAL_DATA_PTR; + +struct starfive_pcie { + struct pcie_plda plda; + struct clk_bulk clks; + struct reset_ctl_bulk rsts; + struct gpio_desc reset_gpio; + struct regmap *regmap; + u32 stg_arfun; + u32 stg_awfun; + u32 stg_rp_nep; +}; + +static int starfive_pcie_atr_init(struct starfive_pcie *priv) +{ + struct udevice *ctlr = pci_get_controller(priv->plda.dev); + struct pci_controller *hose = dev_get_uclass_priv(ctlr); + int i, ret; + + /* + * As the two host bridges in JH7110 soc have the same default + * address translation table, this cause the second root port can't + * access it's host bridge config space correctly. + * To workaround, config the ATR of host bridge config space by SW. + */ + + ret = plda_pcie_set_atr_entry(&priv->plda, + (phys_addr_t)priv->plda.cfg_base, 0, + priv->plda.cfg_size, + XR3PCI_ATR_TRSLID_PCIE_CONFIG); + if (ret) + return ret; + + for (i = 0; i < hose->region_count; i++) { + if (hose->regions[i].flags == PCI_REGION_SYS_MEMORY) + continue; + + /* Only support identity mappings. */ + if (hose->regions[i].bus_start != + hose->regions[i].phys_start) + return -EINVAL; + + ret = plda_pcie_set_atr_entry(&priv->plda, + hose->regions[i].phys_start, + hose->regions[i].bus_start, + hose->regions[i].size, + XR3PCI_ATR_TRSLID_PCIE_MEMORY); + if (ret) + return ret; + } + + return 0; +} + +static int starfive_pcie_get_syscon(struct udevice *dev) +{ + struct starfive_pcie *priv = dev_get_priv(dev); + struct udevice *syscon; + struct ofnode_phandle_args syscfg_phandle; + u32 cells[4]; + int ret; + + /* get corresponding syscon phandle */ + ret = dev_read_phandle_with_args(dev, "starfive,stg-syscon", NULL, 0, 0, + &syscfg_phandle); + + if (ret < 0) { + dev_err(dev, "Can't get syscfg phandle: %d\n", ret); + return ret; + } + + ret = uclass_get_device_by_ofnode(UCLASS_SYSCON, syscfg_phandle.node, + &syscon); + if (ret) { + dev_err(dev, "Unable to find syscon device (%d)\n", ret); + return ret; + } + + priv->regmap = syscon_get_regmap(syscon); + if (!priv->regmap) { + dev_err(dev, "Unable to find regmap\n"); + return -ENODEV; + } + + /* get syscon register offset */ + ret = dev_read_u32_array(dev, "starfive,stg-syscon", + cells, ARRAY_SIZE(cells)); + if (ret) { + dev_err(dev, "Get syscon register err %d\n", ret); + return -EINVAL; + } + + dev_dbg(dev, "Get syscon values: %x, %x, %x\n", + cells[1], cells[2], cells[3]); + priv->stg_arfun = cells[1]; + priv->stg_awfun = cells[2]; + priv->stg_rp_nep = cells[3]; + + return 0; +} + +static int starfive_pcie_parse_dt(struct udevice *dev) +{ + struct starfive_pcie *priv = dev_get_priv(dev); + int ret; + + priv->plda.reg_base = (void *)dev_read_addr_name(dev, "reg"); + if (priv->plda.reg_base == (void __iomem *)FDT_ADDR_T_NONE) { + dev_err(dev, "Missing required reg address range\n"); + return -EINVAL; + } + + priv->plda.cfg_base = + (void *)dev_read_addr_size_name(dev, + "config", + &priv->plda.cfg_size); + if (priv->plda.cfg_base == (void __iomem *)FDT_ADDR_T_NONE) { + dev_err(dev, "Missing required config address range"); + return -EINVAL; + } + + ret = starfive_pcie_get_syscon(dev); + if (ret) { + dev_err(dev, "Can't get syscon: %d\n", ret); + return ret; + } + + ret = reset_get_bulk(dev, &priv->rsts); + if (ret) { + dev_err(dev, "Can't get reset: %d\n", ret); + return ret; + } + + ret = clk_get_bulk(dev, &priv->clks); + if (ret) { + dev_err(dev, "Can't get clock: %d\n", ret); + return ret; + } + + ret = gpio_request_by_name(dev, "reset-gpios", 0, &priv->reset_gpio, + GPIOD_IS_OUT); + if (ret) { + dev_err(dev, "Can't get reset-gpio: %d\n", ret); + return ret; + } + + if (!dm_gpio_is_valid(&priv->reset_gpio)) { + dev_err(dev, "reset-gpio is not valid\n"); + return -EINVAL; + } + return 0; +} + +static int starfive_pcie_init_port(struct udevice *dev) +{ + int ret, i; + struct starfive_pcie *priv = dev_get_priv(dev); + struct pcie_plda *plda = &priv->plda; + + ret = clk_enable_bulk(&priv->clks); + if (ret) { + dev_err(dev, "Failed to enable clks (ret=%d)\n", ret); + return ret; + } + + ret = reset_deassert_bulk(&priv->rsts); + if (ret) { + dev_err(dev, "Failed to deassert resets (ret=%d)\n", ret); + goto err_deassert_clk; + } + + dm_gpio_set_value(&priv->reset_gpio, 1); + /* Disable physical functions except #0 */ + for (i = 1; i < PLDA_FUNC_NUM; i++) { + regmap_update_bits(priv->regmap, + priv->stg_arfun, + STG_SYSCON_AXI4_SLVL_ARFUNC_MASK, + (i << PLDA_PHY_FUNC_SHIFT) << + STG_SYSCON_AXI4_SLVL_ARFUNC_SHIFT); + regmap_update_bits(priv->regmap, + priv->stg_awfun, + STG_SYSCON_AXI4_SLVL_AWFUNC_MASK, + i << PLDA_PHY_FUNC_SHIFT); + + plda_pcie_disable_func(plda); + } + + /* Disable physical functions */ + regmap_update_bits(priv->regmap, + priv->stg_arfun, + STG_SYSCON_AXI4_SLVL_ARFUNC_MASK, + 0); + regmap_update_bits(priv->regmap, + priv->stg_awfun, + STG_SYSCON_AXI4_SLVL_AWFUNC_MASK, + 0); + + plda_pcie_enable_root_port(plda); + + /* PCIe PCI Standard Configuration Identification Settings. */ + plda_pcie_set_standard_class(plda); + + /* + * The LTR message forwarding of PCIe Message Reception was set by core + * as default, but the forward id & addr are also need to be reset. + * If we do not disable LTR message forwarding here, or set a legal + * forwarding address, the kernel will get stuck after this driver probe. + * To workaround, disable the LTR message forwarding support on + * PCIe Message Reception. + */ + plda_pcie_disable_ltr(plda); + + /* Prefetchable memory window 64-bit addressing support */ + plda_pcie_set_pref_win_64bit(plda); + starfive_pcie_atr_init(priv); + + dm_gpio_set_value(&priv->reset_gpio, 0); + /* Ensure that PERST in default at least 300 ms */ + mdelay(300); + + return 0; + +err_deassert_clk: + clk_disable_bulk(&priv->clks); + return ret; +} + +static int starfive_pcie_probe(struct udevice *dev) +{ + struct starfive_pcie *priv = dev_get_priv(dev); + int ret; + + priv->plda.atr_table_num = 0; + priv->plda.dev = dev; + + ret = starfive_pcie_parse_dt(dev); + if (ret) + return ret; + + regmap_update_bits(priv->regmap, + priv->stg_rp_nep, + STG_SYSCON_K_RP_NEP_MASK, + STG_SYSCON_K_RP_NEP_MASK); + + regmap_update_bits(priv->regmap, + priv->stg_awfun, + STG_SYSCON_CKREF_SRC_MASK, + 2 << STG_SYSCON_CKREF_SRC_SHIFT); + + regmap_update_bits(priv->regmap, + priv->stg_awfun, + STG_SYSCON_CLKREQ_MASK, + STG_SYSCON_CLKREQ_MASK); + + ret = starfive_pcie_init_port(dev); + if (ret) + return ret; + + dev_err(dev, "Starfive PCIe bus probed.\n"); + + return 0; +} + +static const struct dm_pci_ops starfive_pcie_ops = { + .read_config = plda_pcie_config_read, + .write_config = plda_pcie_config_write, +}; + +static const struct udevice_id starfive_pcie_ids[] = { + { .compatible = "starfive,jh7110-pcie" }, + { } +}; + +U_BOOT_DRIVER(starfive_pcie_drv) = { + .name = "starfive_7110_pcie", + .id = UCLASS_PCI, + .of_match = starfive_pcie_ids, + .ops = &starfive_pcie_ops, + .probe = starfive_pcie_probe, + .priv_auto = sizeof(struct starfive_pcie), +}; |