4 files changed, 55 insertions, 7 deletions
diff --git a/drivers/bootcount/Kconfig b/drivers/bootcount/Kconfig
index fa6d8e71281..0080d2a165c 100644
--- a/drivers/bootcount/Kconfig
+++ b/drivers/bootcount/Kconfig
@@ -164,6 +164,13 @@ config DM_BOOTCOUNT_SYSCON
 
 	  Accessing the backend is done using the regmap interface.
 
+config DM_BOOTCOUNT_ZYNQMP
+	bool "Support ZynqMP PMUFW as a backing store for bootcount"
+	depends on ARCH_ZYNQMP
+	help
+	  Enable support for the bootcount API by utilising the Persistent
+	  Global General Storage Register 2 of the PMU.
+
 endmenu
 
 endif
diff --git a/drivers/bootcount/Makefile b/drivers/bootcount/Makefile
index 245f8796337..0cf79e428d6 100644
--- a/drivers/bootcount/Makefile
+++ b/drivers/bootcount/Makefile
@@ -16,3 +16,4 @@ obj-$(CONFIG_DM_BOOTCOUNT_I2C_EEPROM)	+= i2c-eeprom.o
 obj-$(CONFIG_DM_BOOTCOUNT_I2C)	+= bootcount_dm_i2c.o
 obj-$(CONFIG_DM_BOOTCOUNT_SPI_FLASH)	+= spi-flash.o
 obj-$(CONFIG_DM_BOOTCOUNT_SYSCON) += bootcount_syscon.o
+obj-$(CONFIG_DM_BOOTCOUNT_ZYNQMP)	+= bootcount_zynqmp.o
diff --git a/drivers/bootcount/bootcount_zynqmp.c b/drivers/bootcount/bootcount_zynqmp.c
new file mode 100644
index 00000000000..bc0984e2d26
--- /dev/null
+++ b/drivers/bootcount/bootcount_zynqmp.c
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: GPL-2.0+
+// SPDX-FileCopyrightText: 2024 CERN (home.cern)
+
+#include <bootcount.h>
+#include <dm.h>
+#include <stdio.h>
+#include <zynqmp_firmware.h>
+#include <asm/arch/hardware.h>
+#include <dm/platdata.h>
+
+static int bootcount_zynqmp_set(struct udevice *dev, const u32 val)
+{
+	int ret;
+
+	ret = zynqmp_mmio_write((ulong)&pmu_base->pers_gen_storage2, 0xFF, val);
+	if (ret)
+		pr_info("%s write fail\n", __func__);
+
+	return ret;
+}
+
+static int bootcount_zynqmp_get(struct udevice *dev, u32 *val)
+{
+	int ret;
+
+	*val = 0;
+	ret = zynqmp_mmio_read((ulong)&pmu_base->pers_gen_storage2, val);
+	if (ret)
+		pr_info("%s read fail\n", __func__);
+
+	return ret;
+}
+
+U_BOOT_DRVINFO(bootcount_zynqmp) = {
+	.name = "bootcount_zynqmp",
+};
+
+static const struct bootcount_ops bootcount_zynqmp_ops = {
+	.get = bootcount_zynqmp_get,
+	.set = bootcount_zynqmp_set,
+};
+
+U_BOOT_DRIVER(bootcount_zynqmp) = {
+	.name = "bootcount_zynqmp",
+	.id = UCLASS_BOOTCOUNT,
+	.ops = &bootcount_zynqmp_ops,
+};
diff --git a/drivers/spi/cadence_qspi.c b/drivers/spi/cadence_qspi.c
index 9c466f8695e..331a46d88f7 100644
--- a/drivers/spi/cadence_qspi.c
+++ b/drivers/spi/cadence_qspi.c
@@ -251,13 +251,6 @@ static int cadence_spi_probe(struct udevice *bus)
 
 	priv->wr_delay = 50 * DIV_ROUND_UP(NSEC_PER_SEC, priv->ref_clk_hz);
 
-	/* Versal and Versal-NET use spi calibration to set read delay */
-	if (CONFIG_IS_ENABLED(ARCH_VERSAL) ||
-	    CONFIG_IS_ENABLED(ARCH_VERSAL_NET) ||
-	    CONFIG_IS_ENABLED(ARCH_VERSAL2))
-		if (priv->read_delay >= 0)
-			priv->read_delay = -1;
-
 	/* Reset ospi flash device */
 	return cadence_qspi_versal_flash_reset(bus);
 }