diff options
Diffstat (limited to 'dts/upstream/Bindings/leds')
| -rw-r--r-- | dts/upstream/Bindings/leds/cznic,turris-omnia-leds.yaml | 8 | ||||
| -rw-r--r-- | dts/upstream/Bindings/leds/leds-class-multicolor.yaml | 2 | ||||
| -rw-r--r-- | dts/upstream/Bindings/leds/leds-lp8860.txt | 50 | ||||
| -rw-r--r-- | dts/upstream/Bindings/leds/qcom,spmi-flash-led.yaml | 1 | ||||
| -rw-r--r-- | dts/upstream/Bindings/leds/st,led1202.yaml | 132 | ||||
| -rw-r--r-- | dts/upstream/Bindings/leds/ti,lp8860.yaml | 90 |
6 files changed, 232 insertions, 51 deletions
diff --git a/dts/upstream/Bindings/leds/cznic,turris-omnia-leds.yaml b/dts/upstream/Bindings/leds/cznic,turris-omnia-leds.yaml index 34ef5215c15..f52f6304c79 100644 --- a/dts/upstream/Bindings/leds/cznic,turris-omnia-leds.yaml +++ b/dts/upstream/Bindings/leds/cznic,turris-omnia-leds.yaml @@ -23,6 +23,12 @@ properties: description: I2C slave address of the microcontroller. maxItems: 1 + interrupts: + description: + Specifier for the global LED brightness changed by front button press + interrupt. + maxItems: 1 + "#address-cells": const: 1 @@ -56,6 +62,7 @@ additionalProperties: false examples: - | + #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/leds/common.h> i2c { @@ -65,6 +72,7 @@ examples: led-controller@2b { compatible = "cznic,turris-omnia-leds"; reg = <0x2b>; + interrupts-extended = <&mcu 11 IRQ_TYPE_NONE>; #address-cells = <1>; #size-cells = <0>; diff --git a/dts/upstream/Bindings/leds/leds-class-multicolor.yaml b/dts/upstream/Bindings/leds/leds-class-multicolor.yaml index e850a889475..bb40bb9e036 100644 --- a/dts/upstream/Bindings/leds/leds-class-multicolor.yaml +++ b/dts/upstream/Bindings/leds/leds-class-multicolor.yaml @@ -27,7 +27,7 @@ properties: description: | For multicolor LED support this property should be defined as either LED_COLOR_ID_RGB or LED_COLOR_ID_MULTI which can be found in - include/linux/leds/common.h. + include/dt-bindings/leds/common.h. enum: [ 8, 9 ] required: diff --git a/dts/upstream/Bindings/leds/leds-lp8860.txt b/dts/upstream/Bindings/leds/leds-lp8860.txt deleted file mode 100644 index 8bb25749a3d..00000000000 --- a/dts/upstream/Bindings/leds/leds-lp8860.txt +++ /dev/null @@ -1,50 +0,0 @@ -* Texas Instruments - lp8860 4-Channel LED Driver - -The LP8860-Q1 is an high-efficiency LED -driver with boost controller. It has 4 high-precision -current sinks that can be controlled by a PWM input -signal, a SPI/I2C master, or both. - -Required properties: - - compatible : - "ti,lp8860" - - reg : I2C slave address - - #address-cells : 1 - - #size-cells : 0 - -Optional properties: - - enable-gpios : gpio pin to enable (active high)/disable the device. - - vled-supply : LED supply - -Required child properties: - - reg : 0 - -Optional child properties: - - function : see Documentation/devicetree/bindings/leds/common.txt - - color : see Documentation/devicetree/bindings/leds/common.txt - - label : see Documentation/devicetree/bindings/leds/common.txt (deprecated) - - linux,default-trigger : - see Documentation/devicetree/bindings/leds/common.txt - -Example: - -#include <dt-bindings/leds/common.h> - -led-controller@2d { - compatible = "ti,lp8860"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x2d>; - enable-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>; - vled-supply = <&vbatt>; - - led@0 { - reg = <0>; - function = LED_FUNCTION_BACKLIGHT; - color = <LED_COLOR_ID_WHITE>; - linux,default-trigger = "backlight"; - }; -} - -For more product information please see the link below: -https://www.ti.com/product/lp8860-q1 diff --git a/dts/upstream/Bindings/leds/qcom,spmi-flash-led.yaml b/dts/upstream/Bindings/leds/qcom,spmi-flash-led.yaml index 1ba607685f5..bcf0ad4ea57 100644 --- a/dts/upstream/Bindings/leds/qcom,spmi-flash-led.yaml +++ b/dts/upstream/Bindings/leds/qcom,spmi-flash-led.yaml @@ -23,6 +23,7 @@ properties: items: - enum: - qcom,pm6150l-flash-led + - qcom,pm660l-flash-led - qcom,pm8150c-flash-led - qcom,pm8150l-flash-led - qcom,pm8350c-flash-led diff --git a/dts/upstream/Bindings/leds/st,led1202.yaml b/dts/upstream/Bindings/leds/st,led1202.yaml new file mode 100644 index 00000000000..f1e5e4efaa3 --- /dev/null +++ b/dts/upstream/Bindings/leds/st,led1202.yaml @@ -0,0 +1,132 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/leds/st,led1202.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ST LED1202 LED controllers + +maintainers: + - Vicentiu Galanopulo <vicentiu.galanopulo@remote-tech.co.uk> + +description: | + The LED1202 is a 12-channel low quiescent current LED controller + programmable via I2C; The output current can be adjusted separately + for each channel by 8-bit analog and 12-bit digital dimming control. + Datasheet available at + https://www.st.com/en/power-management/led1202.html + +properties: + compatible: + const: st,led1202 + + reg: + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + +patternProperties: + "^led@[0-9a-f]$": + type: object + $ref: common.yaml# + unevaluatedProperties: false + + properties: + reg: + minimum: 0 + maximum: 11 + + required: + - reg + +required: + - compatible + - reg + - "#address-cells" + - "#size-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/leds/common.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + led-controller@58 { + compatible = "st,led1202"; + reg = <0x58>; + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0x0>; + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_RED>; + function-enumerator = <1>; + }; + + led@1 { + reg = <0x1>; + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_GREEN>; + function-enumerator = <2>; + }; + + led@2 { + reg = <0x2>; + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_BLUE>; + function-enumerator = <3>; + }; + + led@3 { + reg = <0x3>; + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_RED>; + function-enumerator = <4>; + }; + + led@4 { + reg = <0x4>; + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_GREEN>; + function-enumerator = <5>; + }; + + led@5 { + reg = <0x5>; + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_BLUE>; + function-enumerator = <6>; + }; + + led@6 { + reg = <0x6>; + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_RED>; + function-enumerator = <7>; + }; + + led@7 { + reg = <0x7>; + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_GREEN>; + function-enumerator = <8>; + }; + + led@8 { + reg = <0x8>; + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_BLUE>; + function-enumerator = <9>; + }; + }; + }; +... diff --git a/dts/upstream/Bindings/leds/ti,lp8860.yaml b/dts/upstream/Bindings/leds/ti,lp8860.yaml new file mode 100644 index 00000000000..0ee357b0266 --- /dev/null +++ b/dts/upstream/Bindings/leds/ti,lp8860.yaml @@ -0,0 +1,90 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/leds/ti,lp8860.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments - lp8860 4-Channel LED Driver + +maintainers: + - Andrew Davis <afd@ti.com> + +description: | + The LP8860-Q1 is an high-efficiency LED driver with boost controller. + It has 4 high-precision current sinks that can be controlled by a PWM input + signal, a SPI/I2C master, or both. + + For more product information please see the link below: + https://www.ti.com/product/lp8860-q1 + +properties: + compatible: + const: ti,lp8860 + + reg: + maxItems: 1 + description: I2C slave address + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + enable-gpios: + maxItems: 1 + description: GPIO pin to enable (active high) / disable the device + + vled-supply: + description: LED supply + +patternProperties: + "^led(@[0-3])?$": + type: object + $ref: common.yaml# + unevaluatedProperties: false + + properties: + reg: + description: + Index of the LED. + maxItems: 1 + + function: true + color: true + label: true + linux,default-trigger: true + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/leds/common.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + led-controller@2d { + compatible = "ti,lp8860"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x2d>; + enable-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>; + vled-supply = <&vbatt>; + + led@0 { + reg = <0>; + function = LED_FUNCTION_BACKLIGHT; + color = <LED_COLOR_ID_WHITE>; + linux,default-trigger = "backlight"; + }; + }; + }; + +... |