diff options
Diffstat (limited to 'dts/upstream/Bindings/mfd/tps65910.txt')
| -rw-r--r-- | dts/upstream/Bindings/mfd/tps65910.txt | 205 |
1 files changed, 0 insertions, 205 deletions
diff --git a/dts/upstream/Bindings/mfd/tps65910.txt b/dts/upstream/Bindings/mfd/tps65910.txt deleted file mode 100644 index a5ced46bbde..00000000000 --- a/dts/upstream/Bindings/mfd/tps65910.txt +++ /dev/null @@ -1,205 +0,0 @@ -TPS65910 Power Management Integrated Circuit - -Required properties: -- compatible: "ti,tps65910" or "ti,tps65911" -- reg: I2C slave address -- interrupts: the interrupt outputs of the controller -- #gpio-cells: number of cells to describe a GPIO, this should be 2. - The first cell is the GPIO number. - The second cell is used to specify additional options <unused>. -- gpio-controller: mark the device as a GPIO controller -- #interrupt-cells: the number of cells to describe an IRQ, this should be 2. - The first cell is the IRQ number. - The second cell is the flags, encoded as the trigger masks from - Documentation/devicetree/bindings/interrupt-controller/interrupts.txt -- regulators: This is the list of child nodes that specify the regulator - initialization data for defined regulators. Not all regulators for the given - device need to be present. The definition for each of these nodes is defined - using the standard binding for regulators found at - Documentation/devicetree/bindings/regulator/regulator.txt. - The regulator is matched with the regulator-compatible. - - The valid regulator-compatible values are: - tps65910: vrtc, vio, vdd1, vdd2, vdd3, vdig1, vdig2, vpll, vdac, vaux1, - vaux2, vaux33, vmmc, vbb - tps65911: vrtc, vio, vdd1, vdd2, vddctrl, ldo1, ldo2, ldo3, ldo4, ldo5, - ldo6, ldo7, ldo8 - -- xxx-supply: Input voltage supply regulator. - These entries are required if regulators are enabled for a device. Missing these - properties can cause the regulator registration to fail. - If some of input supply is powered through battery or always-on supply then - also it is require to have these parameters with proper node handle of always - on power supply. - tps65910: - vcc1-supply: VDD1 input. - vcc2-supply: VDD2 input. - vcc3-supply: VAUX33 and VMMC input. - vcc4-supply: VAUX1 and VAUX2 input. - vcc5-supply: VPLL and VDAC input. - vcc6-supply: VDIG1 and VDIG2 input. - vcc7-supply: VRTC and VBB input. - vccio-supply: VIO input. - tps65911: - vcc1-supply: VDD1 input. - vcc2-supply: VDD2 input. - vcc3-supply: LDO6, LDO7 and LDO8 input. - vcc4-supply: LDO5 input. - vcc5-supply: LDO3 and LDO4 input. - vcc6-supply: LDO1 and LDO2 input. - vcc7-supply: VRTC input. - vccio-supply: VIO input. - -Optional properties: -- ti,vmbch-threshold: (tps65911) main battery charged threshold - comparator. (see VMBCH_VSEL in TPS65910 datasheet) -- ti,vmbch2-threshold: (tps65911) main battery discharged threshold - comparator. (see VMBCH_VSEL in TPS65910 datasheet) -- ti,en-ck32k-xtal: enable external 32-kHz crystal oscillator (see CK32K_CTRL - in TPS6591X datasheet) -- ti,en-gpio-sleep: enable sleep control for gpios - There should be 9 entries here, one for each gpio. -- ti,system-power-controller: Telling whether or not this pmic is controlling - the system power. -- ti,sleep-enable: Enable SLEEP state. -- ti,sleep-keep-therm: Keep thermal monitoring on in sleep state. -- ti,sleep-keep-ck32k: Keep the 32KHz clock output on in sleep state. -- ti,sleep-keep-hsclk: Keep high speed internal clock on in sleep state. - -Regulator Optional properties: -- ti,regulator-ext-sleep-control: enable external sleep - control through external inputs [0 (not enabled), 1 (EN1), 2 (EN2) or 4(EN3)] - If this property is not defined, it defaults to 0 (not enabled). - -Example: - - pmu: tps65910@d2 { - compatible = "ti,tps65910"; - reg = <0xd2>; - interrupt-parent = <&intc>; - interrupts = < 0 118 0x04 >; - - #gpio-cells = <2>; - gpio-controller; - - #interrupt-cells = <2>; - interrupt-controller; - - ti,system-power-controller; - - ti,vmbch-threshold = 0; - ti,vmbch2-threshold = 0; - ti,en-ck32k-xtal; - ti,en-gpio-sleep = <0 0 1 0 0 0 0 0 0>; - - vcc1-supply = <®_parent>; - vcc2-supply = <&some_reg>; - vcc3-supply = <...>; - vcc4-supply = <...>; - vcc5-supply = <...>; - vcc6-supply = <...>; - vcc7-supply = <...>; - vccio-supply = <...>; - - regulators { - #address-cells = <1>; - #size-cells = <0>; - - vdd1_reg: regulator@0 { - regulator-compatible = "vdd1"; - reg = <0>; - regulator-min-microvolt = < 600000>; - regulator-max-microvolt = <1500000>; - regulator-always-on; - regulator-boot-on; - ti,regulator-ext-sleep-control = <0>; - }; - vdd2_reg: regulator@1 { - regulator-compatible = "vdd2"; - reg = <1>; - regulator-min-microvolt = < 600000>; - regulator-max-microvolt = <1500000>; - regulator-always-on; - regulator-boot-on; - ti,regulator-ext-sleep-control = <4>; - }; - vddctrl_reg: regulator@2 { - regulator-compatible = "vddctrl"; - reg = <2>; - regulator-min-microvolt = < 600000>; - regulator-max-microvolt = <1400000>; - regulator-always-on; - regulator-boot-on; - ti,regulator-ext-sleep-control = <0>; - }; - vio_reg: regulator@3 { - regulator-compatible = "vio"; - reg = <3>; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - ti,regulator-ext-sleep-control = <1>; - }; - ldo1_reg: regulator@4 { - regulator-compatible = "ldo1"; - reg = <4>; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <3300000>; - ti,regulator-ext-sleep-control = <0>; - }; - ldo2_reg: regulator@5 { - regulator-compatible = "ldo2"; - reg = <5>; - regulator-min-microvolt = <1050000>; - regulator-max-microvolt = <1050000>; - ti,regulator-ext-sleep-control = <0>; - }; - ldo3_reg: regulator@6 { - regulator-compatible = "ldo3"; - reg = <6>; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <3300000>; - ti,regulator-ext-sleep-control = <0>; - }; - ldo4_reg: regulator@7 { - regulator-compatible = "ldo4"; - reg = <7>; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - ti,regulator-ext-sleep-control = <0>; - }; - ldo5_reg: regulator@8 { - regulator-compatible = "ldo5"; - reg = <8>; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <3300000>; - ti,regulator-ext-sleep-control = <0>; - }; - ldo6_reg: regulator@9 { - regulator-compatible = "ldo6"; - reg = <9>; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - ti,regulator-ext-sleep-control = <0>; - }; - ldo7_reg: regulator@10 { - regulator-compatible = "ldo7"; - reg = <10>; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - regulator-boot-on; - ti,regulator-ext-sleep-control = <1>; - }; - ldo8_reg: regulator@11 { - regulator-compatible = "ldo8"; - reg = <11>; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - ti,regulator-ext-sleep-control = <1>; - }; - }; - }; |