1 files changed, 0 insertions, 72 deletions
diff --git a/dts/upstream/Bindings/pci/mobiveil-pcie.txt b/dts/upstream/Bindings/pci/mobiveil-pcie.txt
deleted file mode 100644
index 64156993e05..00000000000
--- a/dts/upstream/Bindings/pci/mobiveil-pcie.txt
+++ /dev/null
@@ -1,72 +0,0 @@
-* Mobiveil AXI PCIe Root Port Bridge DT description
-
-Mobiveil's GPEX 4.0 is a PCIe Gen4 root port bridge IP. This configurable IP
-has up to 8 outbound and inbound windows for the address translation.
-
-Required properties:
-- #address-cells: Address representation for root ports, set to <3>
-- #size-cells: Size representation for root ports, set to <2>
-- #interrupt-cells: specifies the number of cells needed to encode an
-	interrupt source. The value must be 1.
-- compatible: Should contain "mbvl,gpex40-pcie"
-- reg: Should contain PCIe registers location and length
-	Mandatory:
-	"config_axi_slave": PCIe controller registers
-	"csr_axi_slave"	  : Bridge config registers
-	Optional:
-	"gpio_slave"	  : GPIO registers to control slot power
-	"apb_csr"	  : MSI registers
-
-- device_type: must be "pci"
-- apio-wins : number of requested apio outbound windows
-		default 2 outbound windows are configured -
-		1. Config window
-		2. Memory window
-- ppio-wins : number of requested ppio inbound windows
-		default 1 inbound memory window is configured.
-- bus-range: PCI bus numbers covered
-- interrupt-controller: identifies the node as an interrupt controller
-- #interrupt-cells: specifies the number of cells needed to encode an
-	interrupt source. The value must be 1.
-- interrupts: The interrupt line of the PCIe controller
-		last cell of this field is set to 4 to
-		denote it as IRQ_TYPE_LEVEL_HIGH type interrupt.
-- interrupt-map-mask,
-	interrupt-map: standard PCI properties to define the mapping of the
-	PCI interface to interrupt numbers.
-- ranges: ranges for the PCI memory regions (I/O space region is not
-	supported by hardware)
-	Please refer to the standard PCI bus binding document for a more
-	detailed explanation
-
-
-Example:
-++++++++
-	pcie0: pcie@a0000000 {
-		#address-cells = <3>;
-		#size-cells = <2>;
-		compatible = "mbvl,gpex40-pcie";
-		reg =	<0xa0000000 0x00001000>,
-			<0xb0000000 0x00010000>,
-			<0xff000000 0x00200000>,
-			<0xb0010000 0x00001000>;
-		reg-names =	"config_axi_slave",
-				"csr_axi_slave",
-				"gpio_slave",
-				"apb_csr";
-		device_type = "pci";
-		apio-wins = <2>;
-		ppio-wins = <1>;
-		bus-range = <0x00000000 0x000000ff>;
-		interrupt-controller;
-		interrupt-parent = <&gic>;
-		#interrupt-cells = <1>;
-		interrupts = < 0 89 4 >;
-		interrupt-map-mask = <0 0 0 7>;
-		interrupt-map = <0 0 0 0 &pci_express 0>,
-				<0 0 0 1 &pci_express 1>,
-				<0 0 0 2 &pci_express 2>,
-				<0 0 0 3 &pci_express 3>;
-		ranges = < 0x83000000 0 0x00000000 0xa8000000 0 0x8000000>;
-
-	};