diff options
Diffstat (limited to 'dts/upstream/src/arm64/qcom/x1e80100-crd.dts')
| -rw-r--r-- | dts/upstream/src/arm64/qcom/x1e80100-crd.dts | 106 |
1 files changed, 102 insertions, 4 deletions
diff --git a/dts/upstream/src/arm64/qcom/x1e80100-crd.dts b/dts/upstream/src/arm64/qcom/x1e80100-crd.dts index e17ab8251e2..c6e0356ed9a 100644 --- a/dts/upstream/src/arm64/qcom/x1e80100-crd.dts +++ b/dts/upstream/src/arm64/qcom/x1e80100-crd.dts @@ -6,6 +6,8 @@ /dts-v1/; #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/gpio-keys.h> +#include <dt-bindings/input/input.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> #include "x1e80100.dtsi" @@ -49,6 +51,21 @@ stdout-path = "serial0:115200n8"; }; + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&hall_int_n_default>; + pinctrl-names = "default"; + + switch-lid { + gpios = <&tlmm 92 GPIO_ACTIVE_LOW>; + linux,input-type = <EV_SW>; + linux,code = <SW_LID>; + wakeup-source; + wakeup-event-action = <EV_ACT_DEASSERTED>; + }; + }; + pmic-glink { compatible = "qcom,x1e80100-pmic-glink", "qcom,sm8550-pmic-glink", @@ -160,9 +177,9 @@ compatible = "qcom,x1e80100-sndcard"; model = "X1E80100-CRD"; audio-routing = "WooferLeft IN", "WSA WSA_SPK1 OUT", - "TwitterLeft IN", "WSA WSA_SPK2 OUT", + "TweeterLeft IN", "WSA WSA_SPK2 OUT", "WooferRight IN", "WSA2 WSA_SPK2 OUT", - "TwitterRight IN", "WSA2 WSA_SPK2 OUT", + "TweeterRight IN", "WSA2 WSA_SPK2 OUT", "IN1_HPHL", "HPHL_OUT", "IN2_HPHR", "HPHR_OUT", "AMIC2", "MIC BIAS2", @@ -283,6 +300,24 @@ pinctrl-names = "default"; pinctrl-0 = <&nvme_reg_en>; + + regulator-boot-on; + }; + + vreg_wwan: regulator-wwan { + compatible = "regulator-fixed"; + + regulator-name = "SDX_VPH_PWR"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 221 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&wwan_sw_en>; + pinctrl-names = "default"; + + regulator-boot-on; }; }; @@ -783,6 +818,25 @@ status = "okay"; }; +&pcie5 { + perst-gpios = <&tlmm 149 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 151 GPIO_ACTIVE_LOW>; + + vddpe-3v3-supply = <&vreg_wwan>; + + pinctrl-0 = <&pcie5_default>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&pcie5_phy { + vdda-phy-supply = <&vreg_l3i_0p8>; + vdda-pll-supply = <&vreg_l3e_1p2>; + + status = "okay"; +}; + &pcie6a { perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>; wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>; @@ -848,6 +902,10 @@ vdd3-supply = <&vreg_l14b_3p0>; }; +&smb2360_2 { + status = "okay"; +}; + &smb2360_2_eusb2_repeater { vdd18-supply = <&vreg_l3d_1p8>; vdd3-supply = <&vreg_l8b_3p0>; @@ -868,6 +926,7 @@ sound-name-prefix = "WooferLeft"; vdd-1p8-supply = <&vreg_l15b_1p8>; vdd-io-supply = <&vreg_l12b_1p2>; + qcom,port-mapping = <1 2 3 7 10 13>; }; /* WSA8845, Left Tweeter */ @@ -876,9 +935,10 @@ reg = <0 1>; reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>; #sound-dai-cells = <0>; - sound-name-prefix = "TwitterLeft"; + sound-name-prefix = "TweeterLeft"; vdd-1p8-supply = <&vreg_l15b_1p8>; vdd-io-supply = <&vreg_l12b_1p2>; + qcom,port-mapping = <4 5 6 7 11 13>; }; }; @@ -919,6 +979,7 @@ sound-name-prefix = "WooferRight"; vdd-1p8-supply = <&vreg_l15b_1p8>; vdd-io-supply = <&vreg_l12b_1p2>; + qcom,port-mapping = <1 2 3 7 10 13>; }; /* WSA8845, Right Tweeter */ @@ -927,9 +988,10 @@ reg = <0 1>; reset-gpios = <&lpass_tlmm 13 GPIO_ACTIVE_LOW>; #sound-dai-cells = <0>; - sound-name-prefix = "TwitterRight"; + sound-name-prefix = "TweeterRight"; vdd-1p8-supply = <&vreg_l15b_1p8>; vdd-io-supply = <&vreg_l12b_1p2>; + qcom,port-mapping = <4 5 6 7 11 13>; }; }; @@ -945,6 +1007,12 @@ bias-disable; }; + hall_int_n_default: hall-int-n-state { + pins = "gpio92"; + function = "gpio"; + bias-disable; + }; + kybd_default: kybd-default-state { pins = "gpio67"; function = "gpio"; @@ -981,6 +1049,29 @@ }; }; + pcie5_default: pcie5-default-state { + clkreq-n-pins { + pins = "gpio150"; + function = "pcie5_clk"; + drive-strength = <2>; + bias-pull-up; + }; + + perst-n-pins { + pins = "gpio149"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + wake-n-pins { + pins = "gpio151"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + pcie6a_default: pcie6a-default-state { clkreq-n-pins { pins = "gpio153"; @@ -1032,6 +1123,13 @@ bias-disable; output-low; }; + + wwan_sw_en: wwan-sw-en-state { + pins = "gpio221"; + function = "gpio"; + drive-strength = <4>; + bias-disable; + }; }; &uart21 { |