diff options
Diffstat (limited to 'dts/upstream/src/arm64/qcom/x1e80100-microsoft-romulus.dtsi')
| -rw-r--r-- | dts/upstream/src/arm64/qcom/x1e80100-microsoft-romulus.dtsi | 527 |
1 files changed, 517 insertions, 10 deletions
diff --git a/dts/upstream/src/arm64/qcom/x1e80100-microsoft-romulus.dtsi b/dts/upstream/src/arm64/qcom/x1e80100-microsoft-romulus.dtsi index 6835fdeef3a..5867953c735 100644 --- a/dts/upstream/src/arm64/qcom/x1e80100-microsoft-romulus.dtsi +++ b/dts/upstream/src/arm64/qcom/x1e80100-microsoft-romulus.dtsi @@ -22,6 +22,33 @@ i2c7 = &i2c7; }; + wcd938x: audio-codec { + compatible = "qcom,wcd9385-codec"; + + reset-gpios = <&tlmm 191 GPIO_ACTIVE_LOW>; + + qcom,micbias1-microvolt = <1800000>; + qcom,micbias2-microvolt = <1800000>; + qcom,micbias3-microvolt = <1800000>; + qcom,micbias4-microvolt = <1800000>; + qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>; + qcom,mbhc-headset-vthreshold-microvolt = <1700000>; + qcom,mbhc-headphone-vthreshold-microvolt = <50000>; + qcom,rx-device = <&wcd_rx>; + qcom,tx-device = <&wcd_tx>; + + + vdd-buck-supply = <&vreg_l15b>; + vdd-rxtx-supply = <&vreg_l15b>; + vdd-io-supply = <&vreg_l15b>; + vdd-mic-bias-supply = <&vreg_bob1>; + + pinctrl-0 = <&wcd_default>; + pinctrl-names = "default"; + + #sound-dai-cells = <1>; + }; + backlight: backlight { compatible = "pwm-backlight"; pwms = <&pmk8550_pwm 0 5000000>; @@ -97,7 +124,15 @@ reg = <1>; pmic_glink_ss0_ss_in: endpoint { - remote-endpoint = <&usb_1_ss0_qmpphy_out>; + remote-endpoint = <&retimer_ss0_ss_out>; + }; + }; + + port@2 { + reg = <2>; + + pmic_glink_ss0_con_sbu_in: endpoint { + remote-endpoint = <&retimer_ss0_con_sbu_out>; }; }; }; @@ -126,7 +161,15 @@ reg = <1>; pmic_glink_ss1_ss_in: endpoint { - remote-endpoint = <&usb_1_ss1_qmpphy_out>; + remote-endpoint = <&retimer_ss1_ss_out>; + }; + }; + + port@2 { + reg = <2>; + + pmic_glink_ss1_con_sbu_in: endpoint { + remote-endpoint = <&retimer_ss1_con_sbu_out>; }; }; }; @@ -158,6 +201,109 @@ regulator-boot-on; }; + vreg_rtmr0_1p15: regulator-rtmr0-1p15 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_RTMR0_1P15"; + + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + + gpio = <&pmc8380_5_gpios 8 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&rtmr0_1p15_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vreg_rtmr0_1p8: regulator-rtmr0-1p8 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_RTMR0_1P8"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + gpio = <&pm8550ve_9_gpios 8 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&rtmr0_1p8_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vreg_rtmr0_3p3: regulator-rtmr0-3p3 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_RTMR0_3P3"; + + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&pm8550_gpios 11 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&rtmr0_3p3_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vreg_rtmr1_1p15: regulator-rtmr1-1p15 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_RTMR1_1P15"; + + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + + gpio = <&tlmm 188 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&rtmr1_1p15_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vreg_rtmr1_1p8: regulator-rtmr1-1p8 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_RTMR1_1P8"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + gpio = <&tlmm 175 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&rtmr1_1p8_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vreg_rtmr1_3p3: regulator-rtmr1-3p3 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_RTMR1_3P3"; + + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 186 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&rtmr1_3p3_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vreg_nvme: regulator-nvme { compatible = "regulator-fixed"; @@ -184,6 +330,86 @@ regulator-always-on; regulator-boot-on; }; + + sound { + compatible = "qcom,x1e80100-sndcard"; + model = "X1E80100-Romulus"; + audio-routing = "SpkrLeft IN", "WSA WSA_SPK1 OUT", + "SpkrRight IN", "WSA WSA_SPK2 OUT", + "IN1_HPHL", "HPHL_OUT", + "IN2_HPHR", "HPHR_OUT", + "AMIC2", "MIC BIAS2", + "VA DMIC0", "MIC BIAS3", + "VA DMIC1", "MIC BIAS3", + "VA DMIC0", "VA MIC BIAS3", + "VA DMIC1", "VA MIC BIAS3", + "TX SWR_INPUT1", "ADC2_OUTPUT"; + + va-dai-link { + link-name = "VA Capture"; + + cpu { + sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>; + }; + + codec { + sound-dai = <&lpass_vamacro 0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + wcd-capture-dai-link { + link-name = "WCD Capture"; + + cpu { + sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>; + }; + + codec { + sound-dai = <&wcd938x 1>, <&swr2 1>, <&lpass_txmacro 0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + wcd-playback-dai-link { + link-name = "WCD Playback"; + + cpu { + sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>; + }; + + codec { + sound-dai = <&wcd938x 0>, <&swr1 0>, <&lpass_rxmacro 0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + wsa-dai-link { + link-name = "WSA Playback"; + + cpu { + sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>; + }; + + codec { + sound-dai = <&left_spkr>, <&right_spkr>, + <&swr0 0>, <&lpass_wsamacro 0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + }; }; &apps_rsc { @@ -558,7 +784,59 @@ status = "okay"; - /* PS8830 USB retimer @8 */ + /* Left-side rear port */ + typec-mux@8 { + compatible = "parade,ps8830"; + reg = <0x8>; + + reset-gpios = <&pm8550_gpios 10 GPIO_ACTIVE_LOW>; + + clocks = <&rpmhcc RPMH_RF_CLK3>; + clock-names = "xo"; + + vdd-supply = <&vreg_rtmr0_1p15>; + vdd33-supply = <&vreg_rtmr0_3p3>; + vdd33-cap-supply = <&vreg_rtmr0_3p3>; + vddar-supply = <&vreg_rtmr0_1p15>; + vddat-supply = <&vreg_rtmr0_1p15>; + vddio-supply = <&vreg_rtmr0_1p8>; + + pinctrl-0 = <&rtmr0_default>; + pinctrl-names = "default"; + + retimer-switch; + orientation-switch; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + retimer_ss0_ss_out: endpoint { + remote-endpoint = <&pmic_glink_ss0_ss_in>; + }; + }; + + port@1 { + reg = <1>; + + retimer_ss0_ss_in: endpoint { + remote-endpoint = <&usb_1_ss0_qmpphy_out>; + }; + }; + + port@2 { + reg = <2>; + + retimer_ss0_con_sbu_out: endpoint { + remote-endpoint = <&pmic_glink_ss0_con_sbu_in>; + }; + }; + }; + }; + }; &i2c4 { @@ -592,7 +870,74 @@ status = "okay"; - /* PS8830 USB retimer @8 */ + /* Left-side front port */ + typec-mux@8 { + compatible = "parade,ps8830"; + reg = <0x8>; + + reset-gpios = <&tlmm 176 GPIO_ACTIVE_LOW>; + + clocks = <&rpmhcc RPMH_RF_CLK4>; + clock-names = "xo"; + + vdd-supply = <&vreg_rtmr1_1p15>; + vdd33-supply = <&vreg_rtmr1_3p3>; + vdd33-cap-supply = <&vreg_rtmr1_3p3>; + vddar-supply = <&vreg_rtmr1_1p15>; + vddat-supply = <&vreg_rtmr1_1p15>; + vddio-supply = <&vreg_rtmr1_1p8>; + + retimer-switch; + orientation-switch; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + retimer_ss1_ss_out: endpoint { + remote-endpoint = <&pmic_glink_ss1_ss_in>; + }; + }; + + port@1 { + reg = <1>; + + retimer_ss1_ss_in: endpoint { + remote-endpoint = <&usb_1_ss1_qmpphy_out>; + }; + }; + + port@2 { + reg = <2>; + + retimer_ss1_con_sbu_out: endpoint { + remote-endpoint = <&pmic_glink_ss1_con_sbu_in>; + }; + }; + }; + }; +}; + +&lpass_tlmm { + spkr_01_sd_n_active: spkr-01-sd-n-active-state { + pins = "gpio12"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-low; + }; +}; + +&lpass_vamacro { + qcom,dmic-sample-rate = <4800000>; + + vdd-micb-supply = <&vreg_l1b>; + + pinctrl-0 = <&dmic01_default>; + pinctrl-names = "default"; }; &mdss { @@ -641,6 +986,25 @@ status = "okay"; }; +&pcie3 { + perst-gpios = <&tlmm 143 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 145 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&pcie3_default>; + pinctrl-names = "default"; + + /* The RTS5261 chip on the other side only does Gen1x1 anyway */ + max-link-speed = <1>; + status = "okay"; +}; + +&pcie3_phy { + vdda-phy-supply = <&vreg_l3c>; + vdda-pll-supply = <&vreg_l3e>; + + status = "okay"; +}; + &pcie4 { status = "okay"; }; @@ -671,6 +1035,28 @@ status = "okay"; }; +&pm8550_gpios { + rtmr0_default: rtmr0-reset-n-active-state { + pins = "gpio10"; + function = "normal"; + power-source = <1>; /* 1.8V */ + }; + + rtmr0_3p3_reg_en: rtmr0-3p3-reg-en-state { + pins = "gpio11"; + function = "normal"; + power-source = <1>; /* 1.8V */ + }; +}; + +&pm8550ve_9_gpios { + rtmr0_1p8_reg_en: rtmr0-1p8-reg-en-state { + pins = "gpio8"; + function = "normal"; + power-source = <1>; /* 1.8V */ + }; +}; + &pmc8380_3_gpios { edp_bl_en: edp-bl-en-state { pins = "gpio4"; @@ -681,6 +1067,14 @@ }; }; +&pmc8380_5_gpios { + rtmr0_1p15_reg_en: rtmr0-1p15-reg-en-state { + pins = "gpio8"; + function = "normal"; + power-source = <1>; /* 1.8V */ + }; +}; + &pmk8550_pwm { status = "okay"; }; @@ -706,23 +1100,31 @@ &remoteproc_adsp { firmware-name = "qcom/x1e80100/microsoft/Romulus/qcadsp8380.mbn", - "qcom/x1e80100/microsoft/Romulus/adsp_dtb.mbn"; + "qcom/x1e80100/microsoft/Romulus/adsp_dtbs.elf"; status = "okay"; }; &remoteproc_cdsp { firmware-name = "qcom/x1e80100/microsoft/Romulus/qccdsp8380.mbn", - "qcom/x1e80100/microsoft/Romulus/cdsp_dtb.mbn"; + "qcom/x1e80100/microsoft/Romulus/cdsp_dtbs.elf"; status = "okay"; }; +&smb2360_0 { + status = "okay"; +}; + &smb2360_0_eusb2_repeater { vdd18-supply = <&vreg_l3d>; vdd3-supply = <&vreg_l2b>; }; +&smb2360_1 { + status = "okay"; +}; + &smb2360_1_eusb2_repeater { vdd18-supply = <&vreg_l3d>; vdd3-supply = <&vreg_l14b>; @@ -737,6 +1139,59 @@ vdd3-supply = <&vreg_l8b>; }; +&swr0 { + pinctrl-0 = <&wsa_swr_active>, <&spkr_01_sd_n_active>; + pinctrl-names = "default"; + + status = "okay"; + + /* WSA8845, Left speaker */ + left_spkr: speaker@0,0 { + compatible = "sdw20217020400"; + reg = <0 0>; + reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>; + #sound-dai-cells = <0>; + sound-name-prefix = "SpkrLeft"; + vdd-1p8-supply = <&vreg_l15b>; + vdd-io-supply = <&vreg_l12b>; + qcom,port-mapping = <1 2 3 7 10 13>; + }; + + /* WSA8845, Right speaker */ + right_spkr: speaker@0,1 { + compatible = "sdw20217020400"; + reg = <0 1>; + reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>; + #sound-dai-cells = <0>; + sound-name-prefix = "SpkrRight"; + vdd-1p8-supply = <&vreg_l15b>; + vdd-io-supply = <&vreg_l12b>; + qcom,port-mapping = <4 5 6 7 11 13>; + }; +}; + +&swr1 { + status = "okay"; + + /* WCD9385 RX */ + wcd_rx: codec@0,4 { + compatible = "sdw20217010d00"; + reg = <0 4>; + qcom,rx-port-mapping = <1 2 3 4 5>; + }; +}; + +&swr2 { + status = "okay"; + + /* WCD9385 TX */ + wcd_tx: codec@0,3 { + compatible = "sdw20217010d00"; + reg = <0 3>; + qcom,tx-port-mapping = <2 2 3 4>; + }; +}; + &tlmm { gpio-reserved-ranges = <44 4>, /* SPI (TPM) */ <238 1>; /* UFS Reset */ @@ -767,6 +1222,29 @@ bias-disable; }; + pcie3_default: pcie3-default-state { + perst-n-pins { + pins = "gpio143"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + clkreq-n-pins { + pins = "gpio144"; + function = "pcie3_clk"; + drive-strength = <2>; + bias-pull-up; + }; + + wake-n-pins { + pins = "gpio145"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + pcie6a_default: pcie6a-default-state { perst-n-pins { pins = "gpio152"; @@ -790,6 +1268,35 @@ }; }; + rtmr1_1p8_reg_en: rtmr1-1p8-reg-en-state { + pins = "gpio175"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + rtmr1_3p3_reg_en: rtmr1-3p3-reg-en-state { + pins = "gpio186"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + rtmr1_1p15_reg_en: rtmr1-1p15-reg-en-state { + pins = "gpio188"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + wcd_default: wcd-reset-n-active-state { + pins = "gpio191"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-low; + }; + cam_indicator_en: cam-indicator-en-state { pins = "gpio225"; function = "gpio"; @@ -823,7 +1330,7 @@ }; &usb_1_ss0_qmpphy { - vdda-phy-supply = <&vreg_l3e>; + vdda-phy-supply = <&vreg_l2j>; vdda-pll-supply = <&vreg_l1j>; status = "okay"; @@ -842,7 +1349,7 @@ }; &usb_1_ss0_qmpphy_out { - remote-endpoint = <&pmic_glink_ss0_ss_in>; + remote-endpoint = <&retimer_ss0_ss_in>; }; &usb_1_ss1_hsphy { @@ -855,7 +1362,7 @@ }; &usb_1_ss1_qmpphy { - vdda-phy-supply = <&vreg_l3e>; + vdda-phy-supply = <&vreg_l2j>; vdda-pll-supply = <&vreg_l2d>; status = "okay"; @@ -874,7 +1381,7 @@ }; &usb_1_ss1_qmpphy_out { - remote-endpoint = <&pmic_glink_ss1_ss_in>; + remote-endpoint = <&retimer_ss1_ss_in>; }; /* MP0 goes to the Surface Connector, MP1 goes to the USB-A port */ |