diff options
Diffstat (limited to 'include/configs/Alaska8220.h')
| -rw-r--r-- | include/configs/Alaska8220.h | 194 |
1 files changed, 97 insertions, 97 deletions
diff --git a/include/configs/Alaska8220.h b/include/configs/Alaska8220.h index 431ed4e56fb..2581fdfefd8 100644 --- a/include/configs/Alaska8220.h +++ b/include/configs/Alaska8220.h @@ -35,8 +35,8 @@ /* Input clock running at 30Mhz, read Hid1 for the CPU multiplier to determine the CPU speed. */ -#define CFG_MPC8220_CLKIN 30000000/* ... running at 30MHz */ -#define CFG_MPC8220_SYSPLL_VCO_MULTIPLIER 16 /* VCO multiplier can't be read from any register */ +#define CONFIG_SYS_MPC8220_CLKIN 30000000/* ... running at 30MHz */ +#define CONFIG_SYS_MPC8220_SYSPLL_VCO_MULTIPLIER 16 /* VCO multiplier can't be read from any register */ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ @@ -53,16 +53,16 @@ #ifdef CONFIG_EXTUART_CONSOLE # define CONFIG_CONS_INDEX 1 -# define CFG_NS16550_SERIAL -# define CFG_NS16550 -# define CFG_NS16550_REG_SIZE 1 -# define CFG_NS16550_COM1 (CFG_CPLD_BASE + 0x1008) -# define CFG_NS16550_CLK 18432000 +# define CONFIG_SYS_NS16550_SERIAL +# define CONFIG_SYS_NS16550 +# define CONFIG_SYS_NS16550_REG_SIZE 1 +# define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CPLD_BASE + 0x1008) +# define CONFIG_SYS_NS16550_CLK 18432000 #endif #define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */ -#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } #define CONFIG_TIMESTAMP /* Print image info with timestamp */ @@ -120,104 +120,104 @@ * I2C configuration */ #define CONFIG_HARD_I2C 1 -#define CFG_I2C_MODULE 1 +#define CONFIG_SYS_I2C_MODULE 1 -#define CFG_I2C_SPEED 100000 /* 100 kHz */ -#define CFG_I2C_SLAVE 0x7F +#define CONFIG_SYS_I2C_SPEED 100000 /* 100 kHz */ +#define CONFIG_SYS_I2C_SLAVE 0x7F /* * EEPROM configuration */ -#define CFG_I2C_EEPROM_ADDR 0x52 /* 1011000xb */ -#define CFG_I2C_EEPROM_ADDR_LEN 1 -#define CFG_EEPROM_PAGE_WRITE_BITS 3 -#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 70 +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x52 /* 1011000xb */ +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 70 /* #define CONFIG_ENV_IS_IN_EEPROM 1 #define CONFIG_ENV_OFFSET 0 #define CONFIG_ENV_SIZE 256 */ -/* If CFG_AMD_BOOT is defined, the the system will boot from AMD. +/* If CONFIG_SYS_AMD_BOOT is defined, the the system will boot from AMD. else undefined it will boot from Intel Strata flash */ -#define CFG_AMD_BOOT 1 +#define CONFIG_SYS_AMD_BOOT 1 /* * Flexbus Chipselect configuration */ -#if defined (CFG_AMD_BOOT) -#define CFG_CS0_BASE 0xfff0 -#define CFG_CS0_MASK 0x00080000 /* 512 KB */ -#define CFG_CS0_CTRL 0x003f0d40 - -#define CFG_CS1_BASE 0xfe00 -#define CFG_CS1_MASK 0x01000000 /* 16 MB */ -#define CFG_CS1_CTRL 0x003f1540 +#if defined (CONFIG_SYS_AMD_BOOT) +#define CONFIG_SYS_CS0_BASE 0xfff0 +#define CONFIG_SYS_CS0_MASK 0x00080000 /* 512 KB */ +#define CONFIG_SYS_CS0_CTRL 0x003f0d40 + +#define CONFIG_SYS_CS1_BASE 0xfe00 +#define CONFIG_SYS_CS1_MASK 0x01000000 /* 16 MB */ +#define CONFIG_SYS_CS1_CTRL 0x003f1540 #else -#define CFG_CS0_BASE 0xff00 -#define CFG_CS0_MASK 0x01000000 /* 16 MB */ -#define CFG_CS0_CTRL 0x003f1540 +#define CONFIG_SYS_CS0_BASE 0xff00 +#define CONFIG_SYS_CS0_MASK 0x01000000 /* 16 MB */ +#define CONFIG_SYS_CS0_CTRL 0x003f1540 -#define CFG_CS1_BASE 0xfe08 -#define CFG_CS1_MASK 0x00080000 /* 512 KB */ -#define CFG_CS1_CTRL 0x003f0d40 +#define CONFIG_SYS_CS1_BASE 0xfe08 +#define CONFIG_SYS_CS1_MASK 0x00080000 /* 512 KB */ +#define CONFIG_SYS_CS1_CTRL 0x003f0d40 #endif -#define CFG_CS2_BASE 0xf100 -#define CFG_CS2_MASK 0x00040000 -#define CFG_CS2_CTRL 0x003f1140 +#define CONFIG_SYS_CS2_BASE 0xf100 +#define CONFIG_SYS_CS2_MASK 0x00040000 +#define CONFIG_SYS_CS2_CTRL 0x003f1140 -#define CFG_CS3_BASE 0xf200 -#define CFG_CS3_MASK 0x00040000 -#define CFG_CS3_CTRL 0x003f1100 +#define CONFIG_SYS_CS3_BASE 0xf200 +#define CONFIG_SYS_CS3_MASK 0x00040000 +#define CONFIG_SYS_CS3_CTRL 0x003f1100 -#define CFG_FLASH0_BASE (CFG_CS0_BASE << 16) -#define CFG_FLASH1_BASE (CFG_CS1_BASE << 16) +#define CONFIG_SYS_FLASH0_BASE (CONFIG_SYS_CS0_BASE << 16) +#define CONFIG_SYS_FLASH1_BASE (CONFIG_SYS_CS1_BASE << 16) -#if defined (CFG_AMD_BOOT) -#define CFG_AMD_BASE CFG_FLASH0_BASE -#define CFG_INTEL_BASE CFG_FLASH1_BASE + 0xf00000 -#define CFG_FLASH_BASE CFG_AMD_BASE +#if defined (CONFIG_SYS_AMD_BOOT) +#define CONFIG_SYS_AMD_BASE CONFIG_SYS_FLASH0_BASE +#define CONFIG_SYS_INTEL_BASE CONFIG_SYS_FLASH1_BASE + 0xf00000 +#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_AMD_BASE #else -#define CFG_INTEL_BASE CFG_FLASH0_BASE + 0xf00000 -#define CFG_AMD_BASE CFG_FLASH1_BASE -#define CFG_FLASH_BASE CFG_INTEL_BASE +#define CONFIG_SYS_INTEL_BASE CONFIG_SYS_FLASH0_BASE + 0xf00000 +#define CONFIG_SYS_AMD_BASE CONFIG_SYS_FLASH1_BASE +#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_INTEL_BASE #endif -#define CFG_CPLD_BASE (CFG_CS2_BASE << 16) -#define CFG_FPGA_BASE (CFG_CS3_BASE << 16) +#define CONFIG_SYS_CPLD_BASE (CONFIG_SYS_CS2_BASE << 16) +#define CONFIG_SYS_FPGA_BASE (CONFIG_SYS_CS3_BASE << 16) -#define CFG_MAX_FLASH_BANKS 4 /* max num of memory banks */ -#define CFG_MAX_FLASH_SECT 128 /* max num of sects on one chip */ +#define CONFIG_SYS_MAX_FLASH_BANKS 4 /* max num of memory banks */ +#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max num of sects on one chip */ -#define CFG_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout (in ms) */ -#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */ -#define CFG_FLASH_LOCK_TOUT 5 /* Timeout for Flash Set Lock Bit (in ms) */ -#define CFG_FLASH_UNLOCK_TOUT 10000 /* Timeout for Flash Clear Lock Bits (in ms) */ -#define CFG_FLASH_PROTECTION /* "Real" (hardware) sectors protection */ +#define CONFIG_SYS_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout (in ms) */ +#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */ +#define CONFIG_SYS_FLASH_LOCK_TOUT 5 /* Timeout for Flash Set Lock Bit (in ms) */ +#define CONFIG_SYS_FLASH_UNLOCK_TOUT 10000 /* Timeout for Flash Clear Lock Bits (in ms) */ +#define CONFIG_SYS_FLASH_PROTECTION /* "Real" (hardware) sectors protection */ #define PHYS_AMD_SECT_SIZE 0x00010000 /* 64 KB sectors (x2) */ #define PHYS_INTEL_SECT_SIZE 0x00020000 /* 128 KB sectors (x2) */ -#define CFG_FLASH_CHECKSUM +#define CONFIG_SYS_FLASH_CHECKSUM /* * Environment settings */ #define CONFIG_ENV_IS_IN_FLASH 1 -#if defined (CFG_AMD_BOOT) -#define CONFIG_ENV_ADDR (CFG_FLASH0_BASE + CFG_CS0_MASK - PHYS_AMD_SECT_SIZE) +#if defined (CONFIG_SYS_AMD_BOOT) +#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH0_BASE + CONFIG_SYS_CS0_MASK - PHYS_AMD_SECT_SIZE) #define CONFIG_ENV_SIZE PHYS_AMD_SECT_SIZE #define CONFIG_ENV_SECT_SIZE PHYS_AMD_SECT_SIZE -#define CONFIG_ENV1_ADDR (CFG_FLASH1_BASE + CFG_CS1_MASK - PHYS_INTEL_SECT_SIZE) +#define CONFIG_ENV1_ADDR (CONFIG_SYS_FLASH1_BASE + CONFIG_SYS_CS1_MASK - PHYS_INTEL_SECT_SIZE) #define CONFIG_ENV1_SIZE PHYS_INTEL_SECT_SIZE #define CONFIG_ENV1_SECT_SIZE PHYS_INTEL_SECT_SIZE #else -#define CONFIG_ENV_ADDR (CFG_FLASH0_BASE + CFG_CS0_MASK - PHYS_INTEL_SECT_SIZE) +#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH0_BASE + CONFIG_SYS_CS0_MASK - PHYS_INTEL_SECT_SIZE) #define CONFIG_ENV_SIZE PHYS_INTEL_SECT_SIZE #define CONFIG_ENV_SECT_SIZE PHYS_INTEL_SECT_SIZE -#define CONFIG_ENV1_ADDR (CFG_FLASH1_BASE + CFG_CS1_MASK - PHYS_AMD_SECT_SIZE) +#define CONFIG_ENV1_ADDR (CONFIG_SYS_FLASH1_BASE + CONFIG_SYS_CS1_MASK - PHYS_AMD_SECT_SIZE) #define CONFIG_ENV1_SIZE PHYS_AMD_SECT_SIZE #define CONFIG_ENV1_SECT_SIZE PHYS_AMD_SECT_SIZE #endif @@ -238,37 +238,37 @@ /* * Memory map */ -#define CFG_MBAR 0xF0000000 -#define CFG_SDRAM_BASE 0x00000000 -#define CFG_DEFAULT_MBAR 0x80000000 -#define CFG_SRAM_BASE (CFG_MBAR + 0x20000) -#define CFG_SRAM_SIZE 0x8000 +#define CONFIG_SYS_MBAR 0xF0000000 +#define CONFIG_SYS_SDRAM_BASE 0x00000000 +#define CONFIG_SYS_DEFAULT_MBAR 0x80000000 +#define CONFIG_SYS_SRAM_BASE (CONFIG_SYS_MBAR + 0x20000) +#define CONFIG_SYS_SRAM_SIZE 0x8000 /* Use SRAM until RAM will be available */ -#define CFG_INIT_RAM_ADDR (CFG_MBAR + 0x20000) -#define CFG_INIT_RAM_END 0x8000 /* End of used area in DPRAM */ +#define CONFIG_SYS_INIT_RAM_ADDR (CONFIG_SYS_MBAR + 0x20000) +#define CONFIG_SYS_INIT_RAM_END 0x8000 /* End of used area in DPRAM */ -#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) -#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET +#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET -#define CFG_MONITOR_BASE TEXT_BASE -#if (CFG_MONITOR_BASE < CFG_FLASH_BASE) -# define CFG_RAMBOOT 1 +#define CONFIG_SYS_MONITOR_BASE TEXT_BASE +#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) +# define CONFIG_SYS_RAMBOOT 1 #endif -#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ -#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ -#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ +#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ +#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ +#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ /* SDRAM configuration */ -#define CFG_SDRAM_TOTAL_BANKS 2 -#define CFG_SDRAM_SPD_I2C_ADDR 0x51 /* 7bit */ -#define CFG_SDRAM_SPD_SIZE 0x40 -#define CFG_SDRAM_CAS_LATENCY 4 /* (CL=2)x2 */ +#define CONFIG_SYS_SDRAM_TOTAL_BANKS 2 +#define CONFIG_SYS_SDRAM_SPD_I2C_ADDR 0x51 /* 7bit */ +#define CONFIG_SYS_SDRAM_SPD_SIZE 0x40 +#define CONFIG_SYS_SDRAM_CAS_LATENCY 4 /* (CL=2)x2 */ /* SDRAM drive strength register */ -#define CFG_SDRAM_DRIVE_STRENGTH ((DRIVE_STRENGTH_LOW << SDRAMDS_SBE_SHIFT) | \ +#define CONFIG_SYS_SDRAM_DRIVE_STRENGTH ((DRIVE_STRENGTH_LOW << SDRAMDS_SBE_SHIFT) | \ (DRIVE_STRENGTH_HIGH << SDRAMDS_SBC_SHIFT) | \ (DRIVE_STRENGTH_LOW << SDRAMDS_SBA_SHIFT) | \ (DRIVE_STRENGTH_OFF << SDRAMDS_SBS_SHIFT) | \ @@ -285,34 +285,34 @@ /* * Miscellaneous configurable options */ -#define CFG_LONGHELP /* undef to save memory */ -#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) -#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else -#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #endif -#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ -#define CFG_MAXARGS 16 /* max number of command args */ -#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CFG_MEMTEST_START 0x00100000 /* memtest works on */ -#define CFG_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */ +#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */ +#define CONFIG_SYS_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */ -#define CFG_LOAD_ADDR 0x100000 /* default load address */ +#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ -#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ +#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ -#define CFG_CACHELINE_SIZE 32 /* For MPC8220 CPUs */ +#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC8220 CPUs */ #if defined(CONFIG_CMD_KGDB) -# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif /* * Various low-level settings */ -#define CFG_HID0_INIT HID0_ICE | HID0_ICFI -#define CFG_HID0_FINAL HID0_ICE +#define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI +#define CONFIG_SYS_HID0_FINAL HID0_ICE /* * JFFS2 partitions |