summaryrefslogtreecommitdiff
path: root/include/configs/EB+MCF-EV123.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/configs/EB+MCF-EV123.h')
-rw-r--r--include/configs/EB+MCF-EV123.h168
1 files changed, 84 insertions, 84 deletions
diff --git a/include/configs/EB+MCF-EV123.h b/include/configs/EB+MCF-EV123.h
index 72f7b3fe4fb..876ec20ad15 100644
--- a/include/configs/EB+MCF-EV123.h
+++ b/include/configs/EB+MCF-EV123.h
@@ -27,7 +27,7 @@
#define CONFIG_EB_MCF_EV123
-#undef CFG_HALT_BEFOR_RAM_JUMP
+#undef CONFIG_SYS_HALT_BEFOR_RAM_JUMP
/*
* High Level Configuration Options (easy to change)
@@ -39,9 +39,9 @@
#define CONFIG_MISC_INIT_R
#define CONFIG_MCFUART
-#define CFG_UART_PORT (0)
+#define CONFIG_SYS_UART_PORT (0)
#define CONFIG_BAUDRATE 9600
-#define CFG_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 }
#undef CONFIG_MONITOR_IS_IN_RAM /* define if monitor is started from a pre-loader */
@@ -91,22 +91,22 @@
# define CONFIG_NET_MULTI 1
# define CONFIG_MII 1
# define CONFIG_MII_INIT 1
-# define CFG_DISCOVER_PHY
-# define CFG_RX_ETH_BUFFER 8
-# define CFG_FAULT_ECHO_LINK_DOWN
+# define CONFIG_SYS_DISCOVER_PHY
+# define CONFIG_SYS_RX_ETH_BUFFER 8
+# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
-# define CFG_FEC0_PINMUX 0
-# define CFG_FEC0_MIIBASE CFG_FEC0_IOBASE
+# define CONFIG_SYS_FEC0_PINMUX 0
+# define CONFIG_SYS_FEC0_MIIBASE CONFIG_SYS_FEC0_IOBASE
# define MCFFEC_TOUT_LOOP 50000
-/* If CFG_DISCOVER_PHY is not defined - hardcoded */
-# ifndef CFG_DISCOVER_PHY
+/* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */
+# ifndef CONFIG_SYS_DISCOVER_PHY
# define FECDUPLEX FULL
# define FECSPEED _100BASET
# else
-# ifndef CFG_FAULT_ECHO_LINK_DOWN
-# define CFG_FAULT_ECHO_LINK_DOWN
+# ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
+# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
# endif
-# endif /* CFG_DISCOVER_PHY */
+# endif /* CONFIG_SYS_DISCOVER_PHY */
#endif
#ifdef CONFIG_MCFFEC
@@ -119,146 +119,146 @@
#endif /* CONFIG_MCFFEC */
#define CONFIG_BOOTDELAY 5
-#define CFG_PROMPT "\nEV123 U-Boot> "
-#define CFG_LONGHELP /* undef to save memory */
+#define CONFIG_SYS_PROMPT "\nEV123 U-Boot> "
+#define CONFIG_SYS_LONGHELP /* undef to save memory */
#if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
#else
-#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
#endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS 16 /* max number of command args */
-#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-#define CFG_LOAD_ADDR 0x20000
+#define CONFIG_SYS_LOAD_ADDR 0x20000
-#define CFG_MEMTEST_START 0x100000
-#define CFG_MEMTEST_END 0x400000
-/*#define CFG_DRAM_TEST 1 */
-#undef CFG_DRAM_TEST
+#define CONFIG_SYS_MEMTEST_START 0x100000
+#define CONFIG_SYS_MEMTEST_END 0x400000
+/*#define CONFIG_SYS_DRAM_TEST 1 */
+#undef CONFIG_SYS_DRAM_TEST
/* Clock and PLL Configuration */
-#define CFG_HZ 10000000
-#define CFG_CLK 58982400 /* 9,8304MHz * 6 */
+#define CONFIG_SYS_HZ 10000000
+#define CONFIG_SYS_CLK 58982400 /* 9,8304MHz * 6 */
/* PLL Configuration: Ext Clock * 6 (see table 9-4 of MCF user manual) */
-#define CFG_MFD 0x01 /* PLL Multiplication Factor Devider */
-#define CFG_RFD 0x00 /* PLL Reduce Frecuency Devider */
+#define CONFIG_SYS_MFD 0x01 /* PLL Multiplication Factor Devider */
+#define CONFIG_SYS_RFD 0x00 /* PLL Reduce Frecuency Devider */
/*
* Low Level Configuration Settings
* (address mappings, register initial values, etc.)
* You should know what you are doing if you make changes here.
*/
-#define CFG_MBAR 0x40000000
+#define CONFIG_SYS_MBAR 0x40000000
/*-----------------------------------------------------------------------
* Definitions for initial stack pointer and data area (in DPRAM)
*/
-#define CFG_INIT_RAM_ADDR 0x20000000
-#define CFG_INIT_RAM_END 0x10000 /* End of used area in internal SRAM */
-#define CFG_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_RAM_ADDR 0x20000000
+#define CONFIG_SYS_INIT_RAM_END 0x10000 /* End of used area in internal SRAM */
+#define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
/*-----------------------------------------------------------------------
* Start addresses for the final memory configuration
* (Set up by the startup code)
- * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
*/
-#define CFG_SDRAM_BASE1 0x00000000
-#define CFG_SDRAM_SIZE1 16 /* SDRAM size in MB */
+#define CONFIG_SYS_SDRAM_BASE1 0x00000000
+#define CONFIG_SYS_SDRAM_SIZE1 16 /* SDRAM size in MB */
/*
-#define CFG_SDRAM_BASE0 CFG_SDRAM_BASE1+CFG_SDRAM_SIZE1*1024*1024
-#define CFG_SDRAM_SIZE0 16 */ /* SDRAM size in MB */
+#define CONFIG_SYS_SDRAM_BASE0 CONFIG_SYS_SDRAM_BASE1+CONFIG_SYS_SDRAM_SIZE1*1024*1024
+#define CONFIG_SYS_SDRAM_SIZE0 16 */ /* SDRAM size in MB */
-#define CFG_SDRAM_BASE CFG_SDRAM_BASE1
-#define CFG_SDRAM_SIZE CFG_SDRAM_SIZE1
+#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_SDRAM_BASE1
+#define CONFIG_SYS_SDRAM_SIZE CONFIG_SYS_SDRAM_SIZE1
-#define CFG_FLASH_BASE 0xFFE00000
-#define CFG_INT_FLASH_BASE 0xF0000000
-#define CFG_INT_FLASH_ENABLE 0x21
+#define CONFIG_SYS_FLASH_BASE 0xFFE00000
+#define CONFIG_SYS_INT_FLASH_BASE 0xF0000000
+#define CONFIG_SYS_INT_FLASH_ENABLE 0x21
/* If M5282 port is fully implemented the monitor base will be behind
* the vector table. */
-#if (TEXT_BASE != CFG_INT_FLASH_BASE)
-#define CFG_MONITOR_BASE (TEXT_BASE + 0x400)
+#if (TEXT_BASE != CONFIG_SYS_INT_FLASH_BASE)
+#define CONFIG_SYS_MONITOR_BASE (TEXT_BASE + 0x400)
#else
-#define CFG_MONITOR_BASE (TEXT_BASE + 0x418) /* 24 Byte for CFM-Config */
+#define CONFIG_SYS_MONITOR_BASE (TEXT_BASE + 0x418) /* 24 Byte for CFM-Config */
#endif
-#define CFG_MONITOR_LEN 0x20000
-#define CFG_MALLOC_LEN (256 << 10)
-#define CFG_BOOTPARAMS_LEN 64*1024
+#define CONFIG_SYS_MONITOR_LEN 0x20000
+#define CONFIG_SYS_MALLOC_LEN (256 << 10)
+#define CONFIG_SYS_BOOTPARAMS_LEN 64*1024
/*
* For booting Linux, the board info and command line data
* have to be in the first 8 MB of memory, since this is
* the maximum mapped by the Linux kernel during initialization ??
*/
-#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
/*-----------------------------------------------------------------------
* FLASH organization
*/
-#define CFG_MAX_FLASH_SECT 35
-#define CFG_MAX_FLASH_BANKS 2
-#define CFG_FLASH_ERASE_TOUT 10000000
-#define CFG_FLASH_PROTECTION
+#define CONFIG_SYS_MAX_FLASH_SECT 35
+#define CONFIG_SYS_MAX_FLASH_BANKS 2
+#define CONFIG_SYS_FLASH_ERASE_TOUT 10000000
+#define CONFIG_SYS_FLASH_PROTECTION
/*-----------------------------------------------------------------------
* Cache Configuration
*/
-#define CFG_CACHELINE_SIZE 16
+#define CONFIG_SYS_CACHELINE_SIZE 16
/*-----------------------------------------------------------------------
* Memory bank definitions
*/
-#define CFG_CS0_BASE CFG_FLASH_BASE
-#define CFG_CS0_SIZE 2*1024*1024
-#define CFG_CS0_WIDTH 16
-#define CFG_CS0_RO 0
-#define CFG_CS0_WS 6
+#define CONFIG_SYS_CS0_BASE CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_CS0_SIZE 2*1024*1024
+#define CONFIG_SYS_CS0_WIDTH 16
+#define CONFIG_SYS_CS0_RO 0
+#define CONFIG_SYS_CS0_WS 6
-#define CFG_CS3_BASE 0xE0000000
-#define CFG_CS3_SIZE 1*1024*1024
-#define CFG_CS3_WIDTH 16
-#define CFG_CS3_RO 0
-#define CFG_CS3_WS 6
+#define CONFIG_SYS_CS3_BASE 0xE0000000
+#define CONFIG_SYS_CS3_SIZE 1*1024*1024
+#define CONFIG_SYS_CS3_WIDTH 16
+#define CONFIG_SYS_CS3_RO 0
+#define CONFIG_SYS_CS3_WS 6
/*-----------------------------------------------------------------------
* Port configuration
*/
-#define CFG_PACNT 0x0000000 /* Port A D[31:24] */
-#define CFG_PADDR 0x0000000
-#define CFG_PADAT 0x0000000
+#define CONFIG_SYS_PACNT 0x0000000 /* Port A D[31:24] */
+#define CONFIG_SYS_PADDR 0x0000000
+#define CONFIG_SYS_PADAT 0x0000000
-#define CFG_PBCNT 0x0000000 /* Port B D[23:16] */
-#define CFG_PBDDR 0x0000000
-#define CFG_PBDAT 0x0000000
+#define CONFIG_SYS_PBCNT 0x0000000 /* Port B D[23:16] */
+#define CONFIG_SYS_PBDDR 0x0000000
+#define CONFIG_SYS_PBDAT 0x0000000
-#define CFG_PCCNT 0x0000000 /* Port C D[15:08] */
-#define CFG_PCDDR 0x0000000
-#define CFG_PCDAT 0x0000000
+#define CONFIG_SYS_PCCNT 0x0000000 /* Port C D[15:08] */
+#define CONFIG_SYS_PCDDR 0x0000000
+#define CONFIG_SYS_PCDAT 0x0000000
-#define CFG_PDCNT 0x0000000 /* Port D D[07:00] */
-#define CFG_PCDDR 0x0000000
-#define CFG_PCDAT 0x0000000
+#define CONFIG_SYS_PDCNT 0x0000000 /* Port D D[07:00] */
+#define CONFIG_SYS_PCDDR 0x0000000
+#define CONFIG_SYS_PCDAT 0x0000000
-#define CFG_PEHLPAR 0xC0
-#define CFG_PUAPAR 0x0F /* UA0..UA3 = Uart 0 +1 */
-#define CFG_DDRUA 0x05
-#define CFG_PJPAR 0xFF
+#define CONFIG_SYS_PEHLPAR 0xC0
+#define CONFIG_SYS_PUAPAR 0x0F /* UA0..UA3 = Uart 0 +1 */
+#define CONFIG_SYS_DDRUA 0x05
+#define CONFIG_SYS_PJPAR 0xFF
/*-----------------------------------------------------------------------
* CCM configuration
*/
-#define CFG_CCM_SIZ 0
+#define CONFIG_SYS_CCM_SIZ 0
/*---------------------------------------------------------------------*/
#endif /* _CONFIG_M5282EVB_H */