diff options
Diffstat (limited to 'include/configs/IVMS8.h')
| -rw-r--r-- | include/configs/IVMS8.h | 196 |
1 files changed, 98 insertions, 98 deletions
diff --git a/include/configs/IVMS8.h b/include/configs/IVMS8.h index ea3ffe0a10a..125cb4b2037 100644 --- a/include/configs/IVMS8.h +++ b/include/configs/IVMS8.h @@ -66,7 +66,7 @@ "nfsaddrs=10.0.0.99:10.0.0.2" #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ -#undef CFG_LOADS_BAUD_CHANGE /* don't allow baudrate change */ +#undef CONFIG_SYS_LOADS_BAUD_CHANGE /* don't allow baudrate change */ #undef CONFIG_WATCHDOG /* watchdog disabled */ @@ -95,34 +95,34 @@ /* * Miscellaneous configurable options */ -#define CFG_LONGHELP /* undef to save memory */ -#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) -#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else -#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #endif -#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ -#define CFG_MAXARGS 16 /* max number of command args */ -#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CFG_MEMTEST_START 0x00100000 /* memtest works on */ -#define CFG_MEMTEST_END 0x00F00000 /* 1 ... 15MB in DRAM */ +#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */ +#define CONFIG_SYS_MEMTEST_END 0x00F00000 /* 1 ... 15MB in DRAM */ -#define CFG_LOAD_ADDR 0x00100000 /* default load address */ +#define CONFIG_SYS_LOAD_ADDR 0x00100000 /* default load address */ -#define CFG_PIO_MODE 0 /* IDE interface in PIO Mode 0 */ +#define CONFIG_SYS_PIO_MODE 0 /* IDE interface in PIO Mode 0 */ -#define CFG_PB_SDRAM_CLKE 0x00008000 /* PB 16 */ -#define CFG_PB_ETH_POWERDOWN 0x00010000 /* PB 15 */ -#define CFG_PB_IDE_MOTOR 0x00020000 /* PB 14 */ +#define CONFIG_SYS_PB_SDRAM_CLKE 0x00008000 /* PB 16 */ +#define CONFIG_SYS_PB_ETH_POWERDOWN 0x00010000 /* PB 15 */ +#define CONFIG_SYS_PB_IDE_MOTOR 0x00020000 /* PB 14 */ -#define CFG_PC_ETH_RESET ((ushort)0x0010) /* PC 11 */ -#define CFG_PC_IDE_RESET ((ushort)0x0020) /* PC 10 */ +#define CONFIG_SYS_PC_ETH_RESET ((ushort)0x0010) /* PC 11 */ +#define CONFIG_SYS_PC_IDE_RESET ((ushort)0x0020) /* PC 10 */ -#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ +#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ -#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } /* * Low Level Configuration Settings @@ -132,63 +132,63 @@ /*----------------------------------------------------------------------- * Internal Memory Mapped Register */ -#define CFG_IMMR 0xFFF00000 /* was: 0xFF000000 */ +#define CONFIG_SYS_IMMR 0xFFF00000 /* was: 0xFF000000 */ /*----------------------------------------------------------------------- * Definitions for initial stack pointer and data area (in DPRAM) */ -#define CFG_INIT_RAM_ADDR CFG_IMMR +#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR #if defined (CONFIG_IVMS8_16M) -# define CFG_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */ +# define CONFIG_SYS_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */ #elif defined (CONFIG_IVMS8_32M) -# define CFG_INIT_RAM_END 0x3000 /* End of used area in DPRAM */ +# define CONFIG_SYS_INIT_RAM_END 0x3000 /* End of used area in DPRAM */ #elif defined (CONFIG_IVMS8_64M) -# define CFG_INIT_RAM_END 0x3000 /* End of used area in DPRAM */ +# define CONFIG_SYS_INIT_RAM_END 0x3000 /* End of used area in DPRAM */ #endif -#define CFG_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) -#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET +#define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- * Start addresses for the final memory configuration * (Set up by the startup code) - * Please note that CFG_SDRAM_BASE _must_ start at 0 + * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 */ -#define CFG_SDRAM_BASE 0x00000000 -#define CFG_FLASH_BASE 0xFF000000 +#define CONFIG_SYS_SDRAM_BASE 0x00000000 +#define CONFIG_SYS_FLASH_BASE 0xFF000000 #ifdef DEBUG -#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ +#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ #else -#define CFG_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */ +#define CONFIG_SYS_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */ #endif -#define CFG_MONITOR_BASE CFG_FLASH_BASE -#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE +#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ /* * For booting Linux, the board info and command line data * have to be in the first 8 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization. */ -#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ +#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ /*----------------------------------------------------------------------- * FLASH organization */ -#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CFG_MAX_FLASH_SECT 256 /* max number of sectors on one chip */ +#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CONFIG_SYS_MAX_FLASH_SECT 256 /* max number of sectors on one chip */ -#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ +#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ +#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ -#define CFG_ENV_IS_IN_FLASH 1 -#define CFG_ENV_OFFSET 0x7A000 /* Offset of Environment Sector */ -#define CFG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */ +#define CONFIG_ENV_IS_IN_FLASH 1 +#define CONFIG_ENV_OFFSET 0x7A000 /* Offset of Environment Sector */ +#define CONFIG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */ /*----------------------------------------------------------------------- * Cache Configuration */ -#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ +#define CONFIG_SYS_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ #if defined(CONFIG_CMD_KGDB) -#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ +#define CONFIG_SYS_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif /*----------------------------------------------------------------------- @@ -199,17 +199,17 @@ */ #if defined(CONFIG_WATCHDOG) # if defined (CONFIG_IVMS8_16M) -# define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \ +# define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \ SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP) # elif defined (CONFIG_IVMS8_32M) -# define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \ +# define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \ SYPCR_SWE | SYPCR_SWP) # elif defined (CONFIG_IVMS8_64M) -# define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \ +# define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \ SYPCR_SWE | SYPCR_SWP) # endif #else -# define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP) +# define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP) #endif /*----------------------------------------------------------------------- @@ -219,21 +219,21 @@ */ /* EARB, DBGC and DBPC are initialised by the HCW */ /* => 0x000000C0 */ -#define CFG_SIUMCR (SIUMCR_BSC | SIUMCR_GB5E) +#define CONFIG_SYS_SIUMCR (SIUMCR_BSC | SIUMCR_GB5E) /*----------------------------------------------------------------------- * TBSCR - Time Base Status and Control 11-26 *----------------------------------------------------------------------- * Clear Reference Interrupt Status, Timebase freezing enabled */ -#define CFG_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF) +#define CONFIG_SYS_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF) /*----------------------------------------------------------------------- * PISCR - Periodic Interrupt Status and Control 11-31 *----------------------------------------------------------------------- * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled */ -#define CFG_PISCR (PISCR_PS | PISCR_PITF) +#define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF) /*----------------------------------------------------------------------- * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30 @@ -242,7 +242,7 @@ * interrupt status bit, set PLL multiplication factor ! */ /* 0x00B0C0C0 */ -#define CFG_PLPRCR \ +#define CONFIG_SYS_PLPRCR \ ( (11 << PLPRCR_MF_SHIFT) | \ PLPRCR_SPLSS | PLPRCR_TEXPS | /*PLPRCR_TMIST|*/ \ /*PLPRCR_CSRC|*/ PLPRCR_LPM_NORMAL | \ @@ -257,7 +257,7 @@ */ #define SCCR_MASK SCCR_EBDF11 /* 0x01800014 */ -#define CFG_SCCR (SCCR_COM01 | /*SCCR_TBS|*/ \ +#define CONFIG_SYS_SCCR (SCCR_COM01 | /*SCCR_TBS|*/ \ SCCR_RTDIV | SCCR_RTSEL | \ /*SCCR_CRQEN|*/ /*SCCR_PRQEN|*/ \ SCCR_EBDF00 | SCCR_DFSYNC00 | \ @@ -270,7 +270,7 @@ *----------------------------------------------------------------------- */ /* 0x00C3 */ -#define CFG_RTCSC (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE) +#define CONFIG_SYS_RTCSC (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE) /*----------------------------------------------------------------------- @@ -278,34 +278,34 @@ *----------------------------------------------------------------------- */ /* TIMEP=2 */ -#define CFG_RCCR 0x0200 +#define CONFIG_SYS_RCCR 0x0200 /*----------------------------------------------------------------------- * RMDS - RISC Microcode Development Support Control Register *----------------------------------------------------------------------- */ -#define CFG_RMDS 0 +#define CONFIG_SYS_RMDS 0 /*----------------------------------------------------------------------- * * Interrupt Levels *----------------------------------------------------------------------- */ -#define CFG_CPM_INTERRUPT 13 /* SIU_LEVEL6 */ +#define CONFIG_SYS_CPM_INTERRUPT 13 /* SIU_LEVEL6 */ /*----------------------------------------------------------------------- * PCMCIA stuff *----------------------------------------------------------------------- * */ -#define CFG_PCMCIA_MEM_ADDR (0xE0000000) -#define CFG_PCMCIA_MEM_SIZE ( 64 << 20 ) -#define CFG_PCMCIA_DMA_ADDR (0xE4000000) -#define CFG_PCMCIA_DMA_SIZE ( 64 << 20 ) -#define CFG_PCMCIA_ATTRB_ADDR (0xE8000000) -#define CFG_PCMCIA_ATTRB_SIZE ( 64 << 20 ) -#define CFG_PCMCIA_IO_ADDR (0xEC000000) -#define CFG_PCMCIA_IO_SIZE ( 64 << 20 ) +#define CONFIG_SYS_PCMCIA_MEM_ADDR (0xE0000000) +#define CONFIG_SYS_PCMCIA_MEM_SIZE ( 64 << 20 ) +#define CONFIG_SYS_PCMCIA_DMA_ADDR (0xE4000000) +#define CONFIG_SYS_PCMCIA_DMA_SIZE ( 64 << 20 ) +#define CONFIG_SYS_PCMCIA_ATTRB_ADDR (0xE8000000) +#define CONFIG_SYS_PCMCIA_ATTRB_SIZE ( 64 << 20 ) +#define CONFIG_SYS_PCMCIA_IO_ADDR (0xEC000000) +#define CONFIG_SYS_PCMCIA_IO_SIZE ( 64 << 20 ) /*----------------------------------------------------------------------- * IDE/ATA stuff @@ -314,23 +314,23 @@ #define CONFIG_IDE_8xx_DIRECT 1 /* PCMCIA interface required */ #define CONFIG_IDE_RESET 1 /* reset for ide supported */ -#define CFG_IDE_MAXBUS 1 /* The IVMS8 has only 1 IDE bus */ -#define CFG_IDE_MAXDEVICE 1 /* ... and only 1 IDE device */ +#define CONFIG_SYS_IDE_MAXBUS 1 /* The IVMS8 has only 1 IDE bus */ +#define CONFIG_SYS_IDE_MAXDEVICE 1 /* ... and only 1 IDE device */ -#define CFG_ATA_BASE_ADDR 0xFE100000 -#define CFG_ATA_IDE0_OFFSET 0x0000 -#undef CFG_ATA_IDE1_OFFSET /* only one IDE bus available */ +#define CONFIG_SYS_ATA_BASE_ADDR 0xFE100000 +#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000 +#undef CONFIG_SYS_ATA_IDE1_OFFSET /* only one IDE bus available */ -#define CFG_ATA_DATA_OFFSET 0x0000 /* Offset for data I/O */ -#define CFG_ATA_REG_OFFSET 0x0080 /* Offset for normal register accesses */ -#define CFG_ATA_ALT_OFFSET 0x0100 /* Offset for alternate registers */ +#define CONFIG_SYS_ATA_DATA_OFFSET 0x0000 /* Offset for data I/O */ +#define CONFIG_SYS_ATA_REG_OFFSET 0x0080 /* Offset for normal register accesses */ +#define CONFIG_SYS_ATA_ALT_OFFSET 0x0100 /* Offset for alternate registers */ /*----------------------------------------------------------------------- * *----------------------------------------------------------------------- * */ -#define CFG_DER 0 +#define CONFIG_SYS_DER 0 /* * Init Memory Controller: @@ -345,17 +345,17 @@ * but not too much to meddle with FLASH accesses */ /* EPROMs are 512kb */ -#define CFG_REMAP_OR_AM 0xFFF80000 /* OR addr mask */ -#define CFG_PRELIM_OR_AM 0xFFF80000 /* OR addr mask */ +#define CONFIG_SYS_REMAP_OR_AM 0xFFF80000 /* OR addr mask */ +#define CONFIG_SYS_PRELIM_OR_AM 0xFFF80000 /* OR addr mask */ /* FLASH timing: ACS = 11, TRLX = 0, CSNT = 1, SCY = 5, EHTR = 1 */ -#define CFG_OR_TIMING_FLASH (/* OR_CSNT_SAM | */ OR_ACS_DIV4 | OR_BI | \ +#define CONFIG_SYS_OR_TIMING_FLASH (/* OR_CSNT_SAM | */ OR_ACS_DIV4 | OR_BI | \ OR_SCY_5_CLK | OR_EHTR) -#define CFG_OR0_REMAP (CFG_REMAP_OR_AM | CFG_OR_TIMING_FLASH) -#define CFG_OR0_PRELIM (CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH) +#define CONFIG_SYS_OR0_REMAP (CONFIG_SYS_REMAP_OR_AM | CONFIG_SYS_OR_TIMING_FLASH) +#define CONFIG_SYS_OR0_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH) /* 16 bit, bank valid */ -#define CFG_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_16 | BR_V ) +#define CONFIG_SYS_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_16 | BR_V ) /* * BR1/OR1 - ELIC SACCO bank @ 0xFE000000 @@ -366,8 +366,8 @@ #define ELIC_SACCO_OR_AM 0xFFFF8000 #define ELIC_SACCO_TIMING 0x00000F26 -#define CFG_OR1 (ELIC_SACCO_OR_AM | ELIC_SACCO_TIMING) -#define CFG_BR1 ((ELIC_SACCO_BASE & BR_BA_MSK) | BR_PS_8 | BR_V ) +#define CONFIG_SYS_OR1 (ELIC_SACCO_OR_AM | ELIC_SACCO_TIMING) +#define CONFIG_SYS_BR1 ((ELIC_SACCO_BASE & BR_BA_MSK) | BR_PS_8 | BR_V ) /* * BR2/OR2 - ELIC EPIC bank @ 0xFE008000 @@ -378,8 +378,8 @@ #define ELIC_EPIC_OR_AM 0xFFFF8000 #define ELIC_EPIC_TIMING 0x00000F26 -#define CFG_OR2 (ELIC_EPIC_OR_AM | ELIC_EPIC_TIMING) -#define CFG_BR2 ((ELIC_EPIC_BASE & BR_BA_MSK) | BR_PS_8 | BR_V ) +#define CONFIG_SYS_OR2 (ELIC_EPIC_OR_AM | ELIC_EPIC_TIMING) +#define CONFIG_SYS_BR2 ((ELIC_EPIC_BASE & BR_BA_MSK) | BR_PS_8 | BR_V ) /* * BR3/OR3: SDRAM @@ -392,8 +392,8 @@ #define SDRAM_MAX_SIZE 0x04000000 /* max 64 MB SDRAM */ -#define CFG_OR3_PRELIM (SDRAM_PRELIM_OR_AM | SDRAM_TIMING ) -#define CFG_BR3_PRELIM ((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMB | BR_V ) +#define CONFIG_SYS_OR3_PRELIM (SDRAM_PRELIM_OR_AM | SDRAM_TIMING ) +#define CONFIG_SYS_BR3_PRELIM ((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMB | BR_V ) /* * BR4/OR4: not used @@ -408,28 +408,28 @@ #define SHARC_OR_AM 0xFFC00000 #define SHARC_TIMING 0x00000700 -#define CFG_OR5 (SHARC_OR_AM | SHARC_TIMING ) -#define CFG_BR5 ((SHARC_BASE & BR_BA_MSK) | BR_PS_32 | BR_MS_UPMA | BR_V ) +#define CONFIG_SYS_OR5 (SHARC_OR_AM | SHARC_TIMING ) +#define CONFIG_SYS_BR5 ((SHARC_BASE & BR_BA_MSK) | BR_PS_32 | BR_MS_UPMA | BR_V ) /* * Memory Periodic Timer Prescaler */ /* periodic timer for refresh */ -#define CFG_MBMR_PTB 204 +#define CONFIG_SYS_MBMR_PTB 204 /* refresh rate 15.6 us (= 64 ms / 4K = 62.4 / quad bursts) for <= 128 MBit */ -#define CFG_MPTPR_2BK_4K MPTPR_PTP_DIV16 /* setting for 2 banks */ -#define CFG_MPTPR_1BK_4K MPTPR_PTP_DIV32 /* setting for 1 bank */ +#define CONFIG_SYS_MPTPR_2BK_4K MPTPR_PTP_DIV16 /* setting for 2 banks */ +#define CONFIG_SYS_MPTPR_1BK_4K MPTPR_PTP_DIV32 /* setting for 1 bank */ /* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit */ -#define CFG_MPTPR_2BK_8K MPTPR_PTP_DIV8 /* setting for 2 banks */ +#define CONFIG_SYS_MPTPR_2BK_8K MPTPR_PTP_DIV8 /* setting for 2 banks */ #if defined (CONFIG_IVMS8_16M) - #define CFG_MPTPR_1BK_8K MPTPR_PTP_DIV16 /* setting for 1 bank */ + #define CONFIG_SYS_MPTPR_1BK_8K MPTPR_PTP_DIV16 /* setting for 1 bank */ #elif defined (CONFIG_IVMS8_32M) -#define CFG_MPTPR_1BK_8K MPTPR_PTP_DIV16 /* setting for 1 bank */ +#define CONFIG_SYS_MPTPR_1BK_8K MPTPR_PTP_DIV16 /* setting for 1 bank */ #elif defined (CONFIG_IVMS8_64M) -#define CFG_MPTPR_1BK_8K MPTPR_PTP_DIV8 /* setting for 1 bank */ +#define CONFIG_SYS_MPTPR_1BK_8K MPTPR_PTP_DIV8 /* setting for 1 bank */ #endif @@ -439,17 +439,17 @@ #if defined (CONFIG_IVMS8_16M) /* 8 column SDRAM */ -# define CFG_MBMR_8COL ((CFG_MBMR_PTB << MBMR_PTB_SHIFT) | \ +# define CONFIG_SYS_MBMR_8COL ((CONFIG_SYS_MBMR_PTB << MBMR_PTB_SHIFT) | \ MBMR_AMB_TYPE_0 | MBMR_DSB_1_CYCL | MBMR_G0CLB_A11 | \ MBMR_RLFB_1X | MBMR_WLFB_1X | MBMR_TLFB_4X) #elif defined (CONFIG_IVMS8_32M) /* 128 MBit SDRAM */ -#define CFG_MBMR_8COL ((CFG_MBMR_PTB << MBMR_PTB_SHIFT) | \ +#define CONFIG_SYS_MBMR_8COL ((CONFIG_SYS_MBMR_PTB << MBMR_PTB_SHIFT) | \ MBMR_AMB_TYPE_1 | MBMR_DSB_1_CYCL | MBMR_G0CLB_A10 | \ MBMR_RLFB_1X | MBMR_WLFB_1X | MBMR_TLFB_4X) #elif defined (CONFIG_IVMS8_64M) /* 128 MBit SDRAM */ -#define CFG_MBMR_8COL ((CFG_MBMR_PTB << MBMR_PTB_SHIFT) | \ +#define CONFIG_SYS_MBMR_8COL ((CONFIG_SYS_MBMR_PTB << MBMR_PTB_SHIFT) | \ MBMR_AMB_TYPE_1 | MBMR_DSB_1_CYCL | MBMR_G0CLB_A10 | \ MBMR_RLFB_1X | MBMR_WLFB_1X | MBMR_TLFB_4X) |