diff options
Diffstat (limited to 'include/configs/KUP4K.h')
| -rw-r--r-- | include/configs/KUP4K.h | 170 |
1 files changed, 85 insertions, 85 deletions
diff --git a/include/configs/KUP4K.h b/include/configs/KUP4K.h index 6f99c1b318e..a8299846491 100644 --- a/include/configs/KUP4K.h +++ b/include/configs/KUP4K.h @@ -81,7 +81,7 @@ #define CONFIG_MISC_INIT_F 1 #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ -#undef CFG_LOADS_BAUD_CHANGE /* don't allow baudrate change */ +#undef CONFIG_SYS_LOADS_BAUD_CHANGE /* don't allow baudrate change */ #define CONFIG_WATCHDOG 1 /* watchdog enabled */ @@ -109,8 +109,8 @@ #undef CONFIG_HARD_I2C /* I2C with hardware support */ #define CONFIG_SOFT_I2C 1 /* I2C bit-banged */ -#define CFG_I2C_SPEED 93000 /* 93 kHz is supposed to work */ -#define CFG_I2C_SLAVE 0xFE +#define CONFIG_SYS_I2C_SPEED 93000 /* 93 kHz is supposed to work */ +#define CONFIG_SYS_I2C_SLAVE 0xFE #ifdef CONFIG_SOFT_I2C /* @@ -135,20 +135,20 @@ * I2C Configuration */ -#define CFG_I2C_PICIO_ADDR 0x21 /* PCF8574 IO Expander */ -#define CFG_I2C_RTC_ADDR 0x51 /* PCF8563 RTC */ +#define CONFIG_SYS_I2C_PICIO_ADDR 0x21 /* PCF8574 IO Expander */ +#define CONFIG_SYS_I2C_RTC_ADDR 0x51 /* PCF8563 RTC */ /* List of I2C addresses to be verified by POST */ -#define I2C_ADDR_LIST {CFG_I2C_PICIO_ADDR, \ - CFG_I2C_RTC_ADDR, \ +#define I2C_ADDR_LIST {CONFIG_SYS_I2C_PICIO_ADDR, \ + CONFIG_SYS_I2C_RTC_ADDR, \ } #define CONFIG_RTC_PCF8563 /* use Philips PCF8563 RTC */ -#define CFG_DISCOVER_PHY +#define CONFIG_SYS_DISCOVER_PHY #define CONFIG_MII #if 0 @@ -161,9 +161,9 @@ #if 1 /* POST support */ -#define CONFIG_POST (CFG_POST_CPU | \ - CFG_POST_RTC | \ - CFG_POST_I2C) +#define CONFIG_POST (CONFIG_SYS_POST_CPU | \ + CONFIG_SYS_POST_RTC | \ + CONFIG_SYS_POST_I2C) #endif @@ -186,27 +186,27 @@ /* * Miscellaneous configurable options */ -#define CFG_LONGHELP /* undef to save memory */ -#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) -#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else -#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #endif -#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ -#define CFG_MAXARGS 16 /* max number of command args */ -#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CFG_MEMTEST_START 0x000400000 /* memtest works on */ -#define CFG_MEMTEST_END 0x002C00000 /* 4 ... 44 MB in DRAM */ +#define CONFIG_SYS_MEMTEST_START 0x000400000 /* memtest works on */ +#define CONFIG_SYS_MEMTEST_END 0x002C00000 /* 4 ... 44 MB in DRAM */ -#define CFG_LOAD_ADDR 0x200000 /* default load address */ +#define CONFIG_SYS_LOAD_ADDR 0x200000 /* default load address */ -#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ +#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ -#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 115200 } +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 115200 } -#define CFG_CONSOLE_INFO_QUIET 1 +#define CONFIG_SYS_CONSOLE_INFO_QUIET 1 /* * Low Level Configuration Settings @@ -216,43 +216,43 @@ /*----------------------------------------------------------------------- * Internal Memory Mapped Register */ -#define CFG_IMMR 0xFFF00000 +#define CONFIG_SYS_IMMR 0xFFF00000 /*----------------------------------------------------------------------- * Definitions for initial stack pointer and data area (in DPRAM) */ -#define CFG_INIT_RAM_ADDR CFG_IMMR -#define CFG_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */ -#define CFG_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) -#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET +#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR +#define CONFIG_SYS_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */ +#define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- * Start addresses for the final memory configuration * (Set up by the startup code) - * Please note that CFG_SDRAM_BASE _must_ start at 0 + * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 */ -#define CFG_SDRAM_BASE 0x00000000 -#define CFG_FLASH_BASE 0x40000000 -#define CFG_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */ -#define CFG_MONITOR_BASE CFG_FLASH_BASE -#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ +#define CONFIG_SYS_SDRAM_BASE 0x00000000 +#define CONFIG_SYS_FLASH_BASE 0x40000000 +#define CONFIG_SYS_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */ +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE +#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ /* * For booting Linux, the board info and command line data * have to be in the first 8 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization. */ -#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ +#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ /*----------------------------------------------------------------------- * FLASH organization */ -#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CFG_MAX_FLASH_SECT 19 /* max number of sectors on one chip */ +#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CONFIG_SYS_MAX_FLASH_SECT 19 /* max number of sectors on one chip */ -#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ +#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ +#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ #define CONFIG_ENV_IS_IN_FLASH 1 #define CONFIG_ENV_OFFSET 0x40000 /* Offset of Environment Sector */ @@ -268,16 +268,16 @@ * Hardware Information Block */ #if 1 -#define CFG_HWINFO_OFFSET 0x000F0000 /* offset of HW Info block */ -#define CFG_HWINFO_SIZE 0x00000100 /* size of HW Info block */ -#define CFG_HWINFO_MAGIC 0x4B26500D /* 'K&P<CR>' */ +#define CONFIG_SYS_HWINFO_OFFSET 0x000F0000 /* offset of HW Info block */ +#define CONFIG_SYS_HWINFO_SIZE 0x00000100 /* size of HW Info block */ +#define CONFIG_SYS_HWINFO_MAGIC 0x4B26500D /* 'K&P<CR>' */ #endif /*----------------------------------------------------------------------- * Cache Configuration */ -#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ +#define CONFIG_SYS_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ #if defined(CONFIG_CMD_KGDB) -#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ +#define CONFIG_SYS_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif /*----------------------------------------------------------------------- @@ -287,10 +287,10 @@ * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze */ #if 0 && defined(CONFIG_WATCHDOG) /* KUP uses external TPS3705 WD */ -#define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \ +#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \ SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP) #else -#define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP) +#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP) #endif /*----------------------------------------------------------------------- @@ -298,27 +298,27 @@ *----------------------------------------------------------------------- * PCMCIA config., multi-function pin tri-state */ -#define CFG_SIUMCR (SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC00) +#define CONFIG_SYS_SIUMCR (SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC00) /*----------------------------------------------------------------------- * TBSCR - Time Base Status and Control 11-26 *----------------------------------------------------------------------- * Clear Reference Interrupt Status, Timebase freezing enabled */ -#define CFG_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF) +#define CONFIG_SYS_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF) /*----------------------------------------------------------------------- * RTCSC - Real-Time Clock Status and Control Register 11-27 *----------------------------------------------------------------------- */ -#define CFG_RTCSC (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE) +#define CONFIG_SYS_RTCSC (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE) /*----------------------------------------------------------------------- * PISCR - Periodic Interrupt Status and Control 11-31 *----------------------------------------------------------------------- * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled */ -#define CFG_PISCR (PISCR_PS | PISCR_PITF) +#define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF) /*----------------------------------------------------------------------- * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30 @@ -328,7 +328,7 @@ * * If this is a 80 MHz CPU, set PLL multiplication factor to 5 (5*16=80)! */ -#define CFG_PLPRCR ( (5-1)<<PLPRCR_MF_SHIFT | PLPRCR_TEXPS | PLPRCR_TMIST ) +#define CONFIG_SYS_PLPRCR ( (5-1)<<PLPRCR_MF_SHIFT | PLPRCR_TEXPS | PLPRCR_TMIST ) /*----------------------------------------------------------------------- * SCCR - System Clock and reset Control Register 15-27 @@ -337,7 +337,7 @@ * power management and some other internal clocks */ #define SCCR_MASK SCCR_EBDF00 -#define CFG_SCCR (SCCR_TBS | SCCR_EBDF01 | \ +#define CONFIG_SYS_SCCR (SCCR_TBS | SCCR_EBDF01 | \ SCCR_COM00 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \ SCCR_DFNL000 | SCCR_DFNH000 | SCCR_DFLCD000 | \ SCCR_DFALCD00) @@ -351,14 +351,14 @@ /* KUP4K use both slots, SLOT_A as "primary". */ #define CONFIG_PCMCIA_SLOT_A 1 -#define CFG_PCMCIA_MEM_ADDR (0xE0000000) -#define CFG_PCMCIA_MEM_SIZE ( 64 << 20 ) -#define CFG_PCMCIA_DMA_ADDR (0xE4000000) -#define CFG_PCMCIA_DMA_SIZE ( 64 << 20 ) -#define CFG_PCMCIA_ATTRB_ADDR (0xE8000000) -#define CFG_PCMCIA_ATTRB_SIZE ( 64 << 20 ) -#define CFG_PCMCIA_IO_ADDR (0xEC000000) -#define CFG_PCMCIA_IO_SIZE ( 64 << 20 ) +#define CONFIG_SYS_PCMCIA_MEM_ADDR (0xE0000000) +#define CONFIG_SYS_PCMCIA_MEM_SIZE ( 64 << 20 ) +#define CONFIG_SYS_PCMCIA_DMA_ADDR (0xE4000000) +#define CONFIG_SYS_PCMCIA_DMA_SIZE ( 64 << 20 ) +#define CONFIG_SYS_PCMCIA_ATTRB_ADDR (0xE8000000) +#define CONFIG_SYS_PCMCIA_ATTRB_SIZE ( 64 << 20 ) +#define CONFIG_SYS_PCMCIA_IO_ADDR (0xEC000000) +#define CONFIG_SYS_PCMCIA_IO_SIZE ( 64 << 20 ) #define PCMCIA_SOCKETS_NO 2 #define PCMCIA_MEM_WIN_NO 8 @@ -373,23 +373,23 @@ #define CONFIG_IDE_LED 1 /* LED for ide supported */ #undef CONFIG_IDE_RESET /* reset for ide not supported */ -#define CFG_IDE_MAXBUS 2 -#define CFG_IDE_MAXDEVICE 4 +#define CONFIG_SYS_IDE_MAXBUS 2 +#define CONFIG_SYS_IDE_MAXDEVICE 4 -#define CFG_ATA_IDE0_OFFSET 0x0000 +#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000 -#define CFG_ATA_IDE1_OFFSET (4 * CFG_PCMCIA_MEM_SIZE) +#define CONFIG_SYS_ATA_IDE1_OFFSET (4 * CONFIG_SYS_PCMCIA_MEM_SIZE) -#define CFG_ATA_BASE_ADDR CFG_PCMCIA_MEM_ADDR +#define CONFIG_SYS_ATA_BASE_ADDR CONFIG_SYS_PCMCIA_MEM_ADDR /* Offset for data I/O */ -#define CFG_ATA_DATA_OFFSET (CFG_PCMCIA_MEM_SIZE + 0x320) +#define CONFIG_SYS_ATA_DATA_OFFSET (CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320) /* Offset for normal register accesses */ -#define CFG_ATA_REG_OFFSET (2 * CFG_PCMCIA_MEM_SIZE + 0x320) +#define CONFIG_SYS_ATA_REG_OFFSET (2 * CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320) /* Offset for alternate registers */ -#define CFG_ATA_ALT_OFFSET 0x0100 +#define CONFIG_SYS_ATA_ALT_OFFSET 0x0100 /*----------------------------------------------------------------------- @@ -397,7 +397,7 @@ *----------------------------------------------------------------------- * */ -#define CFG_DER 0 +#define CONFIG_SYS_DER 0 /* * Init Memory Controller: @@ -410,22 +410,22 @@ * restrict access enough to keep SRAM working (if any) * but not too much to meddle with FLASH accesses */ -#define CFG_REMAP_OR_AM 0x80000000 /* OR addr mask */ -#define CFG_PRELIM_OR_AM 0xE0000000 /* OR addr mask */ +#define CONFIG_SYS_REMAP_OR_AM 0x80000000 /* OR addr mask */ +#define CONFIG_SYS_PRELIM_OR_AM 0xE0000000 /* OR addr mask */ /* * FLASH timing: */ -#define CFG_OR_TIMING_FLASH (OR_ACS_DIV1 | OR_TRLX | OR_CSNT_SAM | \ +#define CONFIG_SYS_OR_TIMING_FLASH (OR_ACS_DIV1 | OR_TRLX | OR_CSNT_SAM | \ OR_SCY_2_CLK | OR_EHTR | OR_BI) -#define CFG_OR0_REMAP (CFG_REMAP_OR_AM | CFG_OR_TIMING_FLASH) -#define CFG_OR0_PRELIM (CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH) -#define CFG_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_16 | BR_V ) +#define CONFIG_SYS_OR0_REMAP (CONFIG_SYS_REMAP_OR_AM | CONFIG_SYS_OR_TIMING_FLASH) +#define CONFIG_SYS_OR0_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH) +#define CONFIG_SYS_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_16 | BR_V ) /* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care) */ -#define CFG_OR_TIMING_SDRAM 0x00000A00 +#define CONFIG_SYS_OR_TIMING_SDRAM 0x00000A00 /* @@ -455,11 +455,11 @@ * 80 Mhz => 80.000.000 / Divider = 156 */ #if defined(CONFIG_80MHz) -#define CFG_MAMR_PTA 156 +#define CONFIG_SYS_MAMR_PTA 156 #elif defined(CONFIG_66MHz) -#define CFG_MAMR_PTA 129 +#define CONFIG_SYS_MAMR_PTA 129 #else /* 50 MHz */ -#define CFG_MAMR_PTA 98 +#define CONFIG_SYS_MAMR_PTA 98 #endif /*CONFIG_??MHz */ /* @@ -467,15 +467,15 @@ * (= 64 ms / 2K = 125 / quad bursts). * For a simpler initialization, 15.6 us is used instead. * - * #define CFG_MPTPR_2BK_2K MPTPR_PTP_DIV32 for 2 banks - * #define CFG_MPTPR_1BK_2K MPTPR_PTP_DIV64 for 1 bank + * #define CONFIG_SYS_MPTPR_2BK_2K MPTPR_PTP_DIV32 for 2 banks + * #define CONFIG_SYS_MPTPR_1BK_2K MPTPR_PTP_DIV64 for 1 bank */ -#define CFG_MPTPR 0x400 +#define CONFIG_SYS_MPTPR 0x400 /* * MAMR settings for SDRAM */ -#define CFG_MAMR 0x80802114 +#define CONFIG_SYS_MAMR 0x80802114 /* * Internal Definitions |