diff options
Diffstat (limited to 'include/configs/M5475EVB.h')
| -rw-r--r-- | include/configs/M5475EVB.h | 198 |
1 files changed, 99 insertions, 99 deletions
diff --git a/include/configs/M5475EVB.h b/include/configs/M5475EVB.h index 37b1c603dca..e48de15f79a 100644 --- a/include/configs/M5475EVB.h +++ b/include/configs/M5475EVB.h @@ -39,9 +39,9 @@ #define CONFIG_M5475 /* define processor type */ #define CONFIG_MCFUART -#define CFG_UART_PORT (0) +#define CONFIG_SYS_UART_PORT (0) #define CONFIG_BAUDRATE 115200 -#define CFG_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } +#define CONFIG_SYS_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } #define CONFIG_HW_WATCHDOG #define CONFIG_WATCHDOG_TIMEOUT 5000 /* timeout in milliseconds, max timeout is 6.71sec */ @@ -72,27 +72,27 @@ # define CONFIG_MII_INIT 1 # define CONFIG_HAS_ETH1 -# define CFG_DMA_USE_INTSRAM 1 -# define CFG_DISCOVER_PHY -# define CFG_RX_ETH_BUFFER 32 -# define CFG_TX_ETH_BUFFER 48 -# define CFG_FAULT_ECHO_LINK_DOWN +# define CONFIG_SYS_DMA_USE_INTSRAM 1 +# define CONFIG_SYS_DISCOVER_PHY +# define CONFIG_SYS_RX_ETH_BUFFER 32 +# define CONFIG_SYS_TX_ETH_BUFFER 48 +# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN -# define CFG_FEC0_PINMUX 0 -# define CFG_FEC0_MIIBASE CFG_FEC0_IOBASE -# define CFG_FEC1_PINMUX 0 -# define CFG_FEC1_MIIBASE CFG_FEC0_IOBASE +# define CONFIG_SYS_FEC0_PINMUX 0 +# define CONFIG_SYS_FEC0_MIIBASE CONFIG_SYS_FEC0_IOBASE +# define CONFIG_SYS_FEC1_PINMUX 0 +# define CONFIG_SYS_FEC1_MIIBASE CONFIG_SYS_FEC0_IOBASE # define MCFFEC_TOUT_LOOP 50000 -/* If CFG_DISCOVER_PHY is not defined - hardcoded */ -# ifndef CFG_DISCOVER_PHY +/* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */ +# ifndef CONFIG_SYS_DISCOVER_PHY # define FECDUPLEX FULL # define FECSPEED _100BASET # else -# ifndef CFG_FAULT_ECHO_LINK_DOWN -# define CFG_FAULT_ECHO_LINK_DOWN +# ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN +# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN # endif -# endif /* CFG_DISCOVER_PHY */ +# endif /* CONFIG_SYS_DISCOVER_PHY */ # define CONFIG_ETHADDR 00:e0:0c:bc:e5:60 # define CONFIG_ETH1ADDR 00:e0:0c:bc:e5:61 @@ -114,21 +114,21 @@ # define CONFIG_PCI_OHCI # define CONFIG_DOS_PARTITION -# undef CFG_USB_OHCI_BOARD_INIT -# undef CFG_USB_OHCI_CPU_INIT -# define CFG_USB_OHCI_MAX_ROOT_PORTS 15 -# define CFG_USB_OHCI_SLOT_NAME "isp1561" -# define CFG_OHCI_SWAP_REG_ACCESS +# undef CONFIG_SYS_USB_OHCI_BOARD_INIT +# undef CONFIG_SYS_USB_OHCI_CPU_INIT +# define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 15 +# define CONFIG_SYS_USB_OHCI_SLOT_NAME "isp1561" +# define CONFIG_SYS_OHCI_SWAP_REG_ACCESS #endif /* I2C */ #define CONFIG_FSL_I2C #define CONFIG_HARD_I2C /* I2C with hw support */ #undef CONFIG_SOFT_I2C /* I2C bit-banged */ -#define CFG_I2C_SPEED 80000 -#define CFG_I2C_SLAVE 0x7F -#define CFG_I2C_OFFSET 0x00008F00 -#define CFG_IMMR CFG_MBAR +#define CONFIG_SYS_I2C_SPEED 80000 +#define CONFIG_SYS_I2C_SLAVE 0x7F +#define CONFIG_SYS_I2C_OFFSET 0x00008F00 +#define CONFIG_SYS_IMMR CONFIG_SYS_MBAR /* PCI */ #ifdef CONFIG_CMD_PCI @@ -136,19 +136,19 @@ #define CONFIG_PCI_PNP 1 #define CONFIG_PCIAUTO_SKIP_HOST_BRIDGE 1 -#define CFG_PCI_CACHE_LINE_SIZE 8 +#define CONFIG_SYS_PCI_CACHE_LINE_SIZE 8 -#define CFG_PCI_MEM_BUS 0x80000000 -#define CFG_PCI_MEM_PHYS CFG_PCI_MEM_BUS -#define CFG_PCI_MEM_SIZE 0x10000000 +#define CONFIG_SYS_PCI_MEM_BUS 0x80000000 +#define CONFIG_SYS_PCI_MEM_PHYS CONFIG_SYS_PCI_MEM_BUS +#define CONFIG_SYS_PCI_MEM_SIZE 0x10000000 -#define CFG_PCI_IO_BUS 0x71000000 -#define CFG_PCI_IO_PHYS CFG_PCI_IO_BUS -#define CFG_PCI_IO_SIZE 0x01000000 +#define CONFIG_SYS_PCI_IO_BUS 0x71000000 +#define CONFIG_SYS_PCI_IO_PHYS CONFIG_SYS_PCI_IO_BUS +#define CONFIG_SYS_PCI_IO_SIZE 0x01000000 -#define CFG_PCI_CFG_BUS 0x70000000 -#define CFG_PCI_CFG_PHYS CFG_PCI_CFG_BUS -#define CFG_PCI_CFG_SIZE 0x01000000 +#define CONFIG_SYS_PCI_CFG_BUS 0x70000000 +#define CONFIG_SYS_PCI_CFG_PHYS CONFIG_SYS_PCI_CFG_BUS +#define CONFIG_SYS_PCI_CFG_SIZE 0x01000000 #endif #define CONFIG_BOOTDELAY 1 /* autoboot after 5 seconds */ @@ -177,29 +177,29 @@ "" #define CONFIG_PRAM 512 /* 512 KB */ -#define CFG_PROMPT "-> " -#define CFG_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_PROMPT "-> " +#define CONFIG_SYS_LONGHELP /* undef to save memory */ #ifdef CONFIG_CMD_KGDB -# define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +# define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else -# define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +# define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #endif -#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ -#define CFG_MAXARGS 16 /* max number of command args */ -#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ -#define CFG_LOAD_ADDR 0x00010000 +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ +#define CONFIG_SYS_LOAD_ADDR 0x00010000 -#define CFG_HZ 1000 -#define CFG_CLK CFG_BUSCLK -#define CFG_CPU_CLK CFG_CLK * 2 +#define CONFIG_SYS_HZ 1000 +#define CONFIG_SYS_CLK CONFIG_SYS_BUSCLK +#define CONFIG_SYS_CPU_CLK CONFIG_SYS_CLK * 2 -#define CFG_MBAR 0xF0000000 -#define CFG_INTSRAM (CFG_MBAR + 0x10000) -#define CFG_INTSRAMSZ 0x8000 +#define CONFIG_SYS_MBAR 0xF0000000 +#define CONFIG_SYS_INTSRAM (CONFIG_SYS_MBAR + 0x10000) +#define CONFIG_SYS_INTSRAMSZ 0x8000 -/*#define CFG_LATCH_ADDR (CFG_CS1_BASE + 0x80000)*/ +/*#define CONFIG_SYS_LATCH_ADDR (CONFIG_SYS_CS1_BASE + 0x80000)*/ /* * Low Level Configuration Settings @@ -209,68 +209,68 @@ /*----------------------------------------------------------------------- * Definitions for initial stack pointer and data area (in DPRAM) */ -#define CFG_INIT_RAM_ADDR 0xF2000000 -#define CFG_INIT_RAM_END 0x1000 /* End of used area in internal SRAM */ -#define CFG_INIT_RAM_CTRL 0x21 -#define CFG_INIT_RAM1_ADDR (CFG_INIT_RAM_ADDR + CFG_INIT_RAM_END) -#define CFG_INIT_RAM1_END 0x1000 /* End of used area in internal SRAM */ -#define CFG_INIT_RAM1_CTRL 0x21 -#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CFG_GBL_DATA_OFFSET ((CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) - 0x10) -#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET +#define CONFIG_SYS_INIT_RAM_ADDR 0xF2000000 +#define CONFIG_SYS_INIT_RAM_END 0x1000 /* End of used area in internal SRAM */ +#define CONFIG_SYS_INIT_RAM_CTRL 0x21 +#define CONFIG_SYS_INIT_RAM1_ADDR (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_END) +#define CONFIG_SYS_INIT_RAM1_END 0x1000 /* End of used area in internal SRAM */ +#define CONFIG_SYS_INIT_RAM1_CTRL 0x21 +#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ +#define CONFIG_SYS_GBL_DATA_OFFSET ((CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) - 0x10) +#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- * Start addresses for the final memory configuration * (Set up by the startup code) - * Please note that CFG_SDRAM_BASE _must_ start at 0 + * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 */ -#define CFG_SDRAM_BASE 0x00000000 -#define CFG_SDRAM_CFG1 0x73711630 -#define CFG_SDRAM_CFG2 0x46770000 -#define CFG_SDRAM_CTRL 0xE10B0000 -#define CFG_SDRAM_EMOD 0x40010000 -#define CFG_SDRAM_MODE 0x018D0000 -#define CFG_SDRAM_DRVSTRENGTH 0x000002AA -#ifdef CFG_DRAMSZ1 -# define CFG_SDRAM_SIZE (CFG_DRAMSZ + CFG_DRAMSZ1) +#define CONFIG_SYS_SDRAM_BASE 0x00000000 +#define CONFIG_SYS_SDRAM_CFG1 0x73711630 +#define CONFIG_SYS_SDRAM_CFG2 0x46770000 +#define CONFIG_SYS_SDRAM_CTRL 0xE10B0000 +#define CONFIG_SYS_SDRAM_EMOD 0x40010000 +#define CONFIG_SYS_SDRAM_MODE 0x018D0000 +#define CONFIG_SYS_SDRAM_DRVSTRENGTH 0x000002AA +#ifdef CONFIG_SYS_DRAMSZ1 +# define CONFIG_SYS_SDRAM_SIZE (CONFIG_SYS_DRAMSZ + CONFIG_SYS_DRAMSZ1) #else -# define CFG_SDRAM_SIZE CFG_DRAMSZ +# define CONFIG_SYS_SDRAM_SIZE CONFIG_SYS_DRAMSZ #endif -#define CFG_MEMTEST_START CFG_SDRAM_BASE + 0x400 -#define CFG_MEMTEST_END ((CFG_SDRAM_SIZE - 3) << 20) +#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE + 0x400 +#define CONFIG_SYS_MEMTEST_END ((CONFIG_SYS_SDRAM_SIZE - 3) << 20) -#define CFG_MONITOR_BASE (CFG_FLASH_BASE + 0x400) -#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ +#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400) +#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ -#define CFG_BOOTPARAMS_LEN 64*1024 -#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ +#define CONFIG_SYS_BOOTPARAMS_LEN 64*1024 +#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ /* * For booting Linux, the board info and command line data * have to be in the first 8 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization ?? */ -#define CFG_BOOTMAPSZ (CFG_SDRAM_BASE + (CFG_SDRAM_SIZE << 20)) +#define CONFIG_SYS_BOOTMAPSZ (CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20)) /*----------------------------------------------------------------------- * FLASH organization */ -#define CFG_FLASH_CFI -#ifdef CFG_FLASH_CFI -# define CFG_FLASH_BASE (CFG_CS0_BASE) +#define CONFIG_SYS_FLASH_CFI +#ifdef CONFIG_SYS_FLASH_CFI +# define CONFIG_SYS_FLASH_BASE (CONFIG_SYS_CS0_BASE) # define CONFIG_FLASH_CFI_DRIVER 1 -# define CFG_FLASH_CFI_WIDTH FLASH_CFI_16BIT -# define CFG_MAX_FLASH_SECT 137 /* max number of sectors on one chip */ -# define CFG_FLASH_PROTECTION /* "Real" (hardware) sectors protection */ -# define CFG_FLASH_USE_BUFFER_WRITE -#ifdef CFG_NOR1SZ -# define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */ -# define CFG_FLASH_SIZE ((CFG_NOR1SZ + CFG_BOOTSZ) << 20) -# define CFG_FLASH_BANKS_LIST { CFG_CS0_BASE, CFG_CS1_BASE } +# define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT +# define CONFIG_SYS_MAX_FLASH_SECT 137 /* max number of sectors on one chip */ +# define CONFIG_SYS_FLASH_PROTECTION /* "Real" (hardware) sectors protection */ +# define CONFIG_SYS_FLASH_USE_BUFFER_WRITE +#ifdef CONFIG_SYS_NOR1SZ +# define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */ +# define CONFIG_SYS_FLASH_SIZE ((CONFIG_SYS_NOR1SZ + CONFIG_SYS_BOOTSZ) << 20) +# define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_CS0_BASE, CONFIG_SYS_CS1_BASE } #else -# define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ -# define CFG_FLASH_SIZE (CFG_BOOTSZ << 20) +# define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ +# define CONFIG_SYS_FLASH_SIZE (CONFIG_SYS_BOOTSZ << 20) #endif #endif @@ -285,7 +285,7 @@ /*----------------------------------------------------------------------- * Cache Configuration */ -#define CFG_CACHELINE_SIZE 16 +#define CONFIG_SYS_CACHELINE_SIZE 16 /*----------------------------------------------------------------------- * Chipselect bank definitions @@ -298,14 +298,14 @@ * CS4 - Available * CS5 - Available */ -#define CFG_CS0_BASE 0xFF800000 -#define CFG_CS0_MASK (((CFG_BOOTSZ << 20) - 1) & 0xFFFF0001) -#define CFG_CS0_CTRL 0x00101980 - -#ifdef CFG_NOR1SZ -#define CFG_CS1_BASE 0xE0000000 -#define CFG_CS1_MASK (((CFG_NOR1SZ << 20) - 1) & 0xFFFF0001) -#define CFG_CS1_CTRL 0x00101D80 +#define CONFIG_SYS_CS0_BASE 0xFF800000 +#define CONFIG_SYS_CS0_MASK (((CONFIG_SYS_BOOTSZ << 20) - 1) & 0xFFFF0001) +#define CONFIG_SYS_CS0_CTRL 0x00101980 + +#ifdef CONFIG_SYS_NOR1SZ +#define CONFIG_SYS_CS1_BASE 0xE0000000 +#define CONFIG_SYS_CS1_MASK (((CONFIG_SYS_NOR1SZ << 20) - 1) & 0xFFFF0001) +#define CONFIG_SYS_CS1_CTRL 0x00101D80 #endif #endif /* _M5475EVB_H */ |