diff options
Diffstat (limited to 'include/configs/MOUSSE.h')
| -rw-r--r-- | include/configs/MOUSSE.h | 210 |
1 files changed, 105 insertions, 105 deletions
diff --git a/include/configs/MOUSSE.h b/include/configs/MOUSSE.h index b69ced66233..986590aaaf0 100644 --- a/include/configs/MOUSSE.h +++ b/include/configs/MOUSSE.h @@ -48,7 +48,7 @@ #define CONFIG_MPC824X 1 #define CONFIG_MPC8240 1 #define CONFIG_MOUSSE 1 -#define CFG_ADDR_MAP_B 1 +#define CONFIG_SYS_ADDR_MAP_B 1 #define CONFIG_CONS_INDEX 1 #define CONFIG_BAUDRATE 9600 #if 1 @@ -88,75 +88,75 @@ /* * Miscellaneous configurable options */ -#undef CFG_LONGHELP /* undef to save memory */ -#define CFG_PROMPT "=>" /* Monitor Command Prompt */ -#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ -#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16) -#define CFG_MAXARGS 8 /* Max number of command args */ +#undef CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_PROMPT "=>" /* Monitor Command Prompt */ +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_MAXARGS 8 /* Max number of command args */ -#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ -#define CFG_LOAD_ADDR 0x00100000 /* Default load address */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ +#define CONFIG_SYS_LOAD_ADDR 0x00100000 /* Default load address */ /*----------------------------------------------------------------------- * Start addresses for the final memory configuration * (Set up by the startup code) - * Please note that CFG_SDRAM_BASE _must_ start at 0 + * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 */ -#define CFG_SDRAM_BASE 0x00000000 +#define CONFIG_SYS_SDRAM_BASE 0x00000000 #ifdef DEBUG -#define CFG_MONITOR_BASE CFG_SDRAM_BASE +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_SDRAM_BASE #else -#define CFG_MONITOR_BASE CFG_FLASH_BASE +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE #endif #ifdef DEBUG -#define CFG_MONITOR_LEN (4 << 20) /* lots of mem ... */ +#define CONFIG_SYS_MONITOR_LEN (4 << 20) /* lots of mem ... */ #else -#define CFG_MONITOR_LEN (512 << 10) /* 512K PLCC bootrom */ +#define CONFIG_SYS_MONITOR_LEN (512 << 10) /* 512K PLCC bootrom */ #endif -#define CFG_MALLOC_LEN (2*(4096 << 10)) /* 2*4096kB for malloc() */ +#define CONFIG_SYS_MALLOC_LEN (2*(4096 << 10)) /* 2*4096kB for malloc() */ -#define CFG_MEMTEST_START 0x00004000 /* memtest works on */ -#define CFG_MEMTEST_END 0x02000000 /* 0 ... 32 MB in DRAM */ +#define CONFIG_SYS_MEMTEST_START 0x00004000 /* memtest works on */ +#define CONFIG_SYS_MEMTEST_END 0x02000000 /* 0 ... 32 MB in DRAM */ -#define CFG_EUMB_ADDR 0xFC000000 +#define CONFIG_SYS_EUMB_ADDR 0xFC000000 -#define CFG_ISA_MEM 0xFD000000 -#define CFG_ISA_IO 0xFE000000 +#define CONFIG_SYS_ISA_MEM 0xFD000000 +#define CONFIG_SYS_ISA_IO 0xFE000000 -#define CFG_FLASH_BASE 0xFFF00000 -#define CFG_FLASH_SIZE ((uint)(512 * 1024)) -#define CFG_RESET_ADDRESS 0xFFF00100 +#define CONFIG_SYS_FLASH_BASE 0xFFF00000 +#define CONFIG_SYS_FLASH_SIZE ((uint)(512 * 1024)) +#define CONFIG_SYS_RESET_ADDRESS 0xFFF00100 #define FLASH_BASE0_PRELIM 0xFFF00000 /* 512K PLCC FLASH/AM29F040*/ #define FLASH_BASE0_SIZE 0x80000 /* 512K */ #define FLASH_BASE1_PRELIM 0xFFE10000 /* AMD 29LV160DB 1MB - 64K FLASH0 SEG =960K (size=0xf0000)*/ -#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } /* * NS16550 Configuration */ -#define CFG_NS16550 -#define CFG_NS16550_SERIAL +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL -#define CFG_NS16550_REG_SIZE 1 +#define CONFIG_SYS_NS16550_REG_SIZE 1 -#define CFG_NS16550_CLK 18432000 +#define CONFIG_SYS_NS16550_CLK 18432000 -#define CFG_NS16550_COM1 0xFFE08080 +#define CONFIG_SYS_NS16550_COM1 0xFFE08080 /*----------------------------------------------------------------------- * Definitions for initial stack pointer and data area (in DPRAM) */ -#define CFG_INIT_RAM_ADDR CFG_SDRAM_BASE + CFG_MONITOR_LEN -#define CFG_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */ -#define CFG_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) -#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET +#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_MONITOR_LEN +#define CONFIG_SYS_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */ +#define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /* * Low Level Configuration Settings @@ -167,24 +167,24 @@ #define CONFIG_SYS_CLK_FREQ 33000000 /* external frequency to pll */ #define CONFIG_PLL_PCI_TO_MEM_MULTIPLIER 2 -#define CFG_HZ 1000 +#define CONFIG_SYS_HZ 1000 -#define CFG_ETH_DEV_FN 0x00 -#define CFG_ETH_IOBASE 0x00104000 +#define CONFIG_SYS_ETH_DEV_FN 0x00 +#define CONFIG_SYS_ETH_IOBASE 0x00104000 /* Bit-field values for MCCR1. */ -#define CFG_ROMNAL 8 -#define CFG_ROMFAL 8 +#define CONFIG_SYS_ROMNAL 8 +#define CONFIG_SYS_ROMFAL 8 /* Bit-field values for MCCR2. */ -#define CFG_REFINT 0xf5 /* Refresh interval */ +#define CONFIG_SYS_REFINT 0xf5 /* Refresh interval */ /* Burst To Precharge. Bits of this value go to MCCR3 and MCCR4. */ -#define CFG_BSTOPRE 0x79 +#define CONFIG_SYS_BSTOPRE 0x79 #ifdef INCLUDE_ECC #define USE_ECC 1 @@ -195,18 +195,18 @@ /* Bit-field values for MCCR3. */ -#define CFG_REFREC 8 /* Refresh to activate interval */ -#define CFG_RDLAT (4+USE_ECC) /* Data latancy from read command */ +#define CONFIG_SYS_REFREC 8 /* Refresh to activate interval */ +#define CONFIG_SYS_RDLAT (4+USE_ECC) /* Data latancy from read command */ /* Bit-field values for MCCR4. */ -#define CFG_PRETOACT 3 /* Precharge to activate interval */ -#define CFG_ACTTOPRE 5 /* Activate to Precharge interval */ -#define CFG_SDMODE_CAS_LAT 3 /* SDMODE CAS latancy */ -#define CFG_SDMODE_WRAP 0 /* SDMODE wrap type */ -#define CFG_SDMODE_BURSTLEN 2 /* SDMODE Burst length */ -#define CFG_ACTORW 2 -#define CFG_REGISTERD_TYPE_BUFFER (1-USE_ECC) +#define CONFIG_SYS_PRETOACT 3 /* Precharge to activate interval */ +#define CONFIG_SYS_ACTTOPRE 5 /* Activate to Precharge interval */ +#define CONFIG_SYS_SDMODE_CAS_LAT 3 /* SDMODE CAS latancy */ +#define CONFIG_SYS_SDMODE_WRAP 0 /* SDMODE wrap type */ +#define CONFIG_SYS_SDMODE_BURSTLEN 2 /* SDMODE Burst length */ +#define CONFIG_SYS_ACTORW 2 +#define CONFIG_SYS_REGISTERD_TYPE_BUFFER (1-USE_ECC) /* Memory bank settings. * Only bits 20-29 are actually used from these vales to set the @@ -214,71 +214,71 @@ * 20 bits will be 0x00000 for a start address, or 0xfffff for an end * address. Refer to the MPC8240 book. */ -#define CFG_RAM_SIZE 0x04000000 /* 64MB */ - - -#define CFG_BANK0_START 0x00000000 -#define CFG_BANK0_END (CFG_RAM_SIZE - 1) -#define CFG_BANK0_ENABLE 1 -#define CFG_BANK1_START 0x3ff00000 -#define CFG_BANK1_END 0x3fffffff -#define CFG_BANK1_ENABLE 0 -#define CFG_BANK2_START 0x3ff00000 -#define CFG_BANK2_END 0x3fffffff -#define CFG_BANK2_ENABLE 0 -#define CFG_BANK3_START 0x3ff00000 -#define CFG_BANK3_END 0x3fffffff -#define CFG_BANK3_ENABLE 0 -#define CFG_BANK4_START 0x3ff00000 -#define CFG_BANK4_END 0x3fffffff -#define CFG_BANK4_ENABLE 0 -#define CFG_BANK5_START 0x3ff00000 -#define CFG_BANK5_END 0x3fffffff -#define CFG_BANK5_ENABLE 0 -#define CFG_BANK6_START 0x3ff00000 -#define CFG_BANK6_END 0x3fffffff -#define CFG_BANK6_ENABLE 0 -#define CFG_BANK7_START 0x3ff00000 -#define CFG_BANK7_END 0x3fffffff -#define CFG_BANK7_ENABLE 0 - -#define CFG_ODCR 0x7f - - -#define CFG_PGMAX 0x32 /* how long the 8240 reatins the currently accessed page in memory +#define CONFIG_SYS_RAM_SIZE 0x04000000 /* 64MB */ + + +#define CONFIG_SYS_BANK0_START 0x00000000 +#define CONFIG_SYS_BANK0_END (CONFIG_SYS_RAM_SIZE - 1) +#define CONFIG_SYS_BANK0_ENABLE 1 +#define CONFIG_SYS_BANK1_START 0x3ff00000 +#define CONFIG_SYS_BANK1_END 0x3fffffff +#define CONFIG_SYS_BANK1_ENABLE 0 +#define CONFIG_SYS_BANK2_START 0x3ff00000 +#define CONFIG_SYS_BANK2_END 0x3fffffff +#define CONFIG_SYS_BANK2_ENABLE 0 +#define CONFIG_SYS_BANK3_START 0x3ff00000 +#define CONFIG_SYS_BANK3_END 0x3fffffff +#define CONFIG_SYS_BANK3_ENABLE 0 +#define CONFIG_SYS_BANK4_START 0x3ff00000 +#define CONFIG_SYS_BANK4_END 0x3fffffff +#define CONFIG_SYS_BANK4_ENABLE 0 +#define CONFIG_SYS_BANK5_START 0x3ff00000 +#define CONFIG_SYS_BANK5_END 0x3fffffff +#define CONFIG_SYS_BANK5_ENABLE 0 +#define CONFIG_SYS_BANK6_START 0x3ff00000 +#define CONFIG_SYS_BANK6_END 0x3fffffff +#define CONFIG_SYS_BANK6_ENABLE 0 +#define CONFIG_SYS_BANK7_START 0x3ff00000 +#define CONFIG_SYS_BANK7_END 0x3fffffff +#define CONFIG_SYS_BANK7_ENABLE 0 + +#define CONFIG_SYS_ODCR 0x7f + + +#define CONFIG_SYS_PGMAX 0x32 /* how long the 8240 reatins the currently accessed page in memory see 8240 book for details*/ #define PCI_MEM_SPACE1_START 0x80000000 #define PCI_MEM_SPACE2_START 0xfd000000 /* IBAT/DBAT Configuration */ /* Ram: 64MB, starts at address-0, r/w instruction/data */ -#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_64M | BATU_VS | BATU_VP) -#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) -#define CFG_DBAT0U CFG_IBAT0U -#define CFG_DBAT0L CFG_IBAT0L +#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_64M | BATU_VS | BATU_VP) +#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) +#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U +#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L /* MPLD/Port-X I/O Space : data and instruction read/write, cache-inhibit */ -#define CFG_IBAT1U (PORTX_DEV_BASE | BATU_BL_128M | BATU_VS | BATU_VP) +#define CONFIG_SYS_IBAT1U (PORTX_DEV_BASE | BATU_BL_128M | BATU_VS | BATU_VP) #if 0 -#define CFG_IBAT1L (PORTX_DEV_BASE | BATL_PP_10 | BATL_MEMCOHERENCE |\ +#define CONFIG_SYS_IBAT1L (PORTX_DEV_BASE | BATL_PP_10 | BATL_MEMCOHERENCE |\ BATL_WRITETHROUGH | BATL_CACHEINHIBIT) #else -#define CFG_IBAT1L (PORTX_DEV_BASE | BATL_PP_10 |BATL_CACHEINHIBIT) +#define CONFIG_SYS_IBAT1L (PORTX_DEV_BASE | BATL_PP_10 |BATL_CACHEINHIBIT) #endif -#define CFG_DBAT1U CFG_IBAT1U -#define CFG_DBAT1L CFG_IBAT1L +#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U +#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L /* PCI Memory region 1: 0x8XXX_XXXX PCI Mem space: EUMBAR, etc - 16MB */ -#define CFG_IBAT2U (PCI_MEM_SPACE1_START|BATU_BL_16M | BATU_VS | BATU_VP) -#define CFG_IBAT2L (PCI_MEM_SPACE1_START|BATL_PP_10 | BATL_GUARDEDSTORAGE|BATL_CACHEINHIBIT) -#define CFG_DBAT2U CFG_IBAT2U -#define CFG_DBAT2L CFG_IBAT2L +#define CONFIG_SYS_IBAT2U (PCI_MEM_SPACE1_START|BATU_BL_16M | BATU_VS | BATU_VP) +#define CONFIG_SYS_IBAT2L (PCI_MEM_SPACE1_START|BATL_PP_10 | BATL_GUARDEDSTORAGE|BATL_CACHEINHIBIT) +#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U +#define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L /* PCI Memory region 2: PCI Devices in 0xFD space */ -#define CFG_IBAT3U (PCI_MEM_SPACE2_START|BATU_BL_16M | BATU_VS | BATU_VP) -#define CFG_IBAT3L (PCI_MEM_SPACE2_START|BATL_PP_10 | BATL_GUARDEDSTORAGE | BATL_CACHEINHIBIT) -#define CFG_DBAT3U CFG_IBAT3U -#define CFG_DBAT3L CFG_IBAT3L +#define CONFIG_SYS_IBAT3U (PCI_MEM_SPACE2_START|BATU_BL_16M | BATU_VS | BATU_VP) +#define CONFIG_SYS_IBAT3L (PCI_MEM_SPACE2_START|BATL_PP_10 | BATL_GUARDEDSTORAGE | BATL_CACHEINHIBIT) +#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U +#define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L /* @@ -286,16 +286,16 @@ * have to be in the first 8 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization. */ -#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ +#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ /*----------------------------------------------------------------------- * FLASH organization */ -#define CFG_MAX_FLASH_BANKS 3 /* Max number of flash banks */ -#define CFG_MAX_FLASH_SECT 64 /* Max number of sectors in one bank */ +#define CONFIG_SYS_MAX_FLASH_BANKS 3 /* Max number of flash banks */ +#define CONFIG_SYS_MAX_FLASH_SECT 64 /* Max number of sectors in one bank */ -#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ +#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ +#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ #if 0 #define CONFIG_ENV_IS_IN_FLASH 1 @@ -310,7 +310,7 @@ /*----------------------------------------------------------------------- * Cache Configuration */ -#define CFG_CACHELINE_SIZE 16 +#define CONFIG_SYS_CACHELINE_SIZE 16 /* |