diff options
Diffstat (limited to 'include/configs/PCIPPC6.h')
| -rw-r--r-- | include/configs/PCIPPC6.h | 146 |
1 files changed, 73 insertions, 73 deletions
diff --git a/include/configs/PCIPPC6.h b/include/configs/PCIPPC6.h index acaab7fbf69..a683a8fbb0a 100644 --- a/include/configs/PCIPPC6.h +++ b/include/configs/PCIPPC6.h @@ -48,7 +48,7 @@ #define CONFIG_CONS_INDEX 1 #define CONFIG_BAUDRATE 9600 -#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } #define CONFIG_PREBOOT "" #define CONFIG_BOOTDELAY 5 @@ -91,51 +91,51 @@ /* * Miscellaneous configurable options */ -#define CFG_LONGHELP /* undef to save memory */ -#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ -#define CFG_HUSH_PARSER 1 /* use "hush" command parser */ -#ifdef CFG_HUSH_PARSER -#define CFG_PROMPT_HUSH_PS2 "> " +#define CONFIG_SYS_HUSH_PARSER 1 /* use "hush" command parser */ +#ifdef CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " #endif -#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ /* Print Buffer Size */ -#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16) +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) -#define CFG_MAXARGS 64 /* max number of command args */ -#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ -#define CFG_LOAD_ADDR 0x00100000 /* Default load address */ +#define CONFIG_SYS_MAXARGS 64 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ +#define CONFIG_SYS_LOAD_ADDR 0x00100000 /* Default load address */ /*----------------------------------------------------------------------- * Start addresses for the final memory configuration * (Set up by the startup code) - * Please note that CFG_SDRAM_BASE _must_ start at 0 + * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 */ -#define CFG_SDRAM_BASE 0x00000000 -#define CFG_FLASH_BASE 0xFFF00000 -#define CFG_FLASH_MAX_SIZE 0x00100000 +#define CONFIG_SYS_SDRAM_BASE 0x00000000 +#define CONFIG_SYS_FLASH_BASE 0xFFF00000 +#define CONFIG_SYS_FLASH_MAX_SIZE 0x00100000 /* Maximum amount of RAM. */ -#define CFG_MAX_RAM_SIZE 0x20000000 /* 512Mb */ +#define CONFIG_SYS_MAX_RAM_SIZE 0x20000000 /* 512Mb */ -#define CFG_RESET_ADDRESS 0xFFF00100 +#define CONFIG_SYS_RESET_ADDRESS 0xFFF00100 -#define CFG_MONITOR_BASE TEXT_BASE +#define CONFIG_SYS_MONITOR_BASE TEXT_BASE -#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ -#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ +#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ +#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ -#if CFG_MONITOR_BASE >= CFG_SDRAM_BASE && \ - CFG_MONITOR_BASE < CFG_SDRAM_BASE + CFG_MAX_RAM_SIZE -#define CFG_RAMBOOT +#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_SDRAM_BASE && \ + CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_MAX_RAM_SIZE +#define CONFIG_SYS_RAMBOOT #else -#undef CFG_RAMBOOT +#undef CONFIG_SYS_RAMBOOT #endif -#define CFG_MEMTEST_START 0x00004000 /* memtest works on */ -#define CFG_MEMTEST_END 0x02000000 /* 0 ... 32 MB in DRAM */ +#define CONFIG_SYS_MEMTEST_START 0x00004000 /* memtest works on */ +#define CONFIG_SYS_MEMTEST_END 0x02000000 /* 0 ... 32 MB in DRAM */ /*----------------------------------------------------------------------- * Definitions for initial stack pointer and data area @@ -143,54 +143,54 @@ /* Size in bytes reserved for initial data */ -#define CFG_GBL_DATA_SIZE 128 +#define CONFIG_SYS_GBL_DATA_SIZE 128 -#define CFG_INIT_RAM_ADDR 0x40000000 -#define CFG_INIT_RAM_END 0x8000 -#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) -#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET +#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 +#define CONFIG_SYS_INIT_RAM_END 0x8000 +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET -#define CFG_INIT_RAM_LOCK +#define CONFIG_SYS_INIT_RAM_LOCK /* * Temporary buffer for serial data until the real serial driver * is initialised (memtest will destroy this buffer) */ -#define CFG_SCONSOLE_ADDR CFG_INIT_RAM_ADDR -#define CFG_SCONSOLE_SIZE 0x0002000 +#define CONFIG_SYS_SCONSOLE_ADDR CONFIG_SYS_INIT_RAM_ADDR +#define CONFIG_SYS_SCONSOLE_SIZE 0x0002000 /* SDRAM 0 - 256MB */ -#define CFG_DBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) -#define CFG_DBAT0U (CFG_SDRAM_BASE | \ +#define CONFIG_SYS_DBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) +#define CONFIG_SYS_DBAT0U (CONFIG_SYS_SDRAM_BASE | \ BATU_BL_256M | BATU_VS | BATU_VP) /* SDRAM 1 - 256MB */ -#define CFG_DBAT1L ((CFG_SDRAM_BASE + 0x10000000) | \ +#define CONFIG_SYS_DBAT1L ((CONFIG_SYS_SDRAM_BASE + 0x10000000) | \ BATL_PP_10 | BATL_MEMCOHERENCE) -#define CFG_DBAT1U ((CFG_SDRAM_BASE + 0x10000000) | \ +#define CONFIG_SYS_DBAT1U ((CONFIG_SYS_SDRAM_BASE + 0x10000000) | \ BATU_BL_256M | BATU_VS | BATU_VP) /* Init RAM in the CPU DCache (no backing memory) */ -#define CFG_DBAT2L (CFG_INIT_RAM_ADDR | \ +#define CONFIG_SYS_DBAT2L (CONFIG_SYS_INIT_RAM_ADDR | \ BATL_PP_10 | BATL_MEMCOHERENCE) -#define CFG_DBAT2U (CFG_INIT_RAM_ADDR | \ +#define CONFIG_SYS_DBAT2U (CONFIG_SYS_INIT_RAM_ADDR | \ BATU_BL_128K | BATU_VS | BATU_VP) /* I/O and PCI memory at 0xf0000000 */ -#define CFG_DBAT3L (0xf0000000 | BATL_PP_10 | BATL_CACHEINHIBIT) -#define CFG_DBAT3U (0xf0000000 | BATU_BL_256M | BATU_VS | BATU_VP) - -#define CFG_IBAT0L CFG_DBAT0L -#define CFG_IBAT0U CFG_DBAT0U -#define CFG_IBAT1L CFG_DBAT1L -#define CFG_IBAT1U CFG_DBAT1U -#define CFG_IBAT2L CFG_DBAT2L -#define CFG_IBAT2U CFG_DBAT2U -#define CFG_IBAT3L CFG_DBAT3L -#define CFG_IBAT3U CFG_DBAT3U +#define CONFIG_SYS_DBAT3L (0xf0000000 | BATL_PP_10 | BATL_CACHEINHIBIT) +#define CONFIG_SYS_DBAT3U (0xf0000000 | BATU_BL_256M | BATU_VS | BATU_VP) + +#define CONFIG_SYS_IBAT0L CONFIG_SYS_DBAT0L +#define CONFIG_SYS_IBAT0U CONFIG_SYS_DBAT0U +#define CONFIG_SYS_IBAT1L CONFIG_SYS_DBAT1L +#define CONFIG_SYS_IBAT1U CONFIG_SYS_DBAT1U +#define CONFIG_SYS_IBAT2L CONFIG_SYS_DBAT2L +#define CONFIG_SYS_IBAT2U CONFIG_SYS_DBAT2U +#define CONFIG_SYS_IBAT3L CONFIG_SYS_DBAT3L +#define CONFIG_SYS_IBAT3U CONFIG_SYS_DBAT3U /* * Low Level Configuration Settings @@ -198,48 +198,48 @@ * You should know what you are doing if you make changes here. * For the detail description refer to the PCIPPC2 user's manual. */ -#define CFG_HZ 1000 -#define CFG_BUS_HZ 100000000 /* bus speed - 100 mhz */ -#define CFG_CPU_CLK 300000000 -#define CFG_BUS_CLK 100000000 +#define CONFIG_SYS_HZ 1000 +#define CONFIG_SYS_BUS_HZ 100000000 /* bus speed - 100 mhz */ +#define CONFIG_SYS_CPU_CLK 300000000 +#define CONFIG_SYS_BUS_CLK 100000000 /* * For booting Linux, the board info and command line data * have to be in the first 8 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization. */ -#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ +#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ /*----------------------------------------------------------------------- * FLASH organization */ -#define CFG_MAX_FLASH_BANKS 1 /* Max number of flash banks */ -#define CFG_MAX_FLASH_SECT 16 /* Max number of sectors in one bank */ +#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* Max number of flash banks */ +#define CONFIG_SYS_MAX_FLASH_SECT 16 /* Max number of sectors in one bank */ -#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CFG_FLASH_WRITE_TOUT 1000 /* Timeout for Flash Write (in ms) */ +#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ +#define CONFIG_SYS_FLASH_WRITE_TOUT 1000 /* Timeout for Flash Write (in ms) */ /* * Note: environment is not EMBEDDED in the U-Boot code. * It's stored in flash separately. */ #define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_ADDR (CFG_FLASH_BASE + 0x70000) +#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x70000) #define CONFIG_ENV_SIZE 0x1000 /* Size of the Environment */ #define CONFIG_ENV_SECT_SIZE 0x10000 /* Size of the Environment Sector */ /*----------------------------------------------------------------------- * Cache Configuration */ -#define CFG_CACHELINE_SIZE 32 +#define CONFIG_SYS_CACHELINE_SIZE 32 #if defined(CONFIG_CMD_KGDB) -# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif /* * L2 cache */ -#undef CFG_L2 +#undef CONFIG_SYS_L2 #define L2_INIT (L2CR_L2SIZ_2M | L2CR_L2CLK_3 | L2CR_L2RAM_BURST | \ L2CR_L2OH_5 | L2CR_L2CTL | L2CR_L2WT) #define L2_ENABLE (L2_INIT | L2CR_L2E) @@ -256,10 +256,10 @@ * Disk-On-Chip configuration */ -#define CFG_MAX_DOC_DEVICE 1 /* Max number of DOC devices */ +#define CONFIG_SYS_MAX_DOC_DEVICE 1 /* Max number of DOC devices */ -#define CFG_DOC_SUPPORT_2000 -#undef CFG_DOC_SUPPORT_MILLENNIUM +#define CONFIG_SYS_DOC_SUPPORT_2000 +#undef CONFIG_SYS_DOC_SUPPORT_MILLENNIUM /*----------------------------------------------------------------------- RTC m48t59 @@ -271,17 +271,17 @@ #define CONFIG_NET_MULTI /* Multi ethernet cards support */ #define CONFIG_EEPRO100 -#define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */ +#define CONFIG_SYS_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */ #define CONFIG_TULIP #define CONFIG_SCSI_SYM53C8XX #define CONFIG_SCSI_DEV_ID 0x000B /* 53c896 */ -#define CFG_SCSI_MAX_LUN 8 /* number of supported LUNs */ -#define CFG_SCSI_MAX_SCSI_ID 15 /* maximum SCSI ID (0..6) */ -#define CFG_SCSI_MAX_DEVICE CFG_SCSI_MAX_SCSI_ID * CFG_SCSI_MAX_LUN /* maximum Target devices */ -#define CFG_SCSI_SPIN_UP_TIME 2 -#define CFG_SCSI_SCAN_BUS_REVERSE 0 +#define CONFIG_SYS_SCSI_MAX_LUN 8 /* number of supported LUNs */ +#define CONFIG_SYS_SCSI_MAX_SCSI_ID 15 /* maximum SCSI ID (0..6) */ +#define CONFIG_SYS_SCSI_MAX_DEVICE CONFIG_SYS_SCSI_MAX_SCSI_ID * CONFIG_SYS_SCSI_MAX_LUN /* maximum Target devices */ +#define CONFIG_SYS_SCSI_SPIN_UP_TIME 2 +#define CONFIG_SYS_SCSI_SCAN_BUS_REVERSE 0 #define CONFIG_DOS_PARTITION #define CONFIG_MAC_PARTITION #define CONFIG_ISO_PARTITION |