diff options
Diffstat (limited to 'include/configs/cmi_mpc5xx.h')
| -rw-r--r-- | include/configs/cmi_mpc5xx.h | 104 |
1 files changed, 52 insertions, 52 deletions
diff --git a/include/configs/cmi_mpc5xx.h b/include/configs/cmi_mpc5xx.h index 19c28364bce..fa70a09f6ae 100644 --- a/include/configs/cmi_mpc5xx.h +++ b/include/configs/cmi_mpc5xx.h @@ -93,25 +93,25 @@ * Miscellaneous configurable options */ -#define CFG_LONGHELP /* undef to save memory */ -#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) -#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else -#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #endif -#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ -#define CFG_MAXARGS 16 /* max number of command args */ -#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CFG_MEMTEST_START 0x00000000 /* memtest works on */ -#define CFG_MEMTEST_END 0x000fa000 /* 1 MB in SRAM */ +#define CONFIG_SYS_MEMTEST_START 0x00000000 /* memtest works on */ +#define CONFIG_SYS_MEMTEST_END 0x000fa000 /* 1 MB in SRAM */ -#define CFG_LOAD_ADDR 0x100000 /* default load address */ +#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ -#define CFG_HZ 1000 /* Decrementer freq: 1 ms ticks */ +#define CONFIG_SYS_HZ 1000 /* Decrementer freq: 1 ms ticks */ -#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 1250000 } +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 1250000 } /* @@ -121,39 +121,39 @@ /* * Internal Memory Mapped (This is not the IMMR content) */ -#define CFG_IMMR 0x01000000 /* Physical start adress of internal memory map */ +#define CONFIG_SYS_IMMR 0x01000000 /* Physical start adress of internal memory map */ /* * Definitions for initial stack pointer and data area */ -#define CFG_INIT_RAM_ADDR (CFG_IMMR + 0x003f9800) /* Physical start adress of internal MPC555 writable RAM */ -#define CFG_INIT_RAM_END (CFG_IMMR + 0x003fffff) /* Physical end adress of internal MPC555 used RAM area */ -#define CFG_GBL_DATA_SIZE 64 /* Size in bytes reserved for initial global data */ -#define CFG_GBL_DATA_OFFSET ((CFG_INIT_RAM_END - CFG_INIT_RAM_ADDR) - CFG_GBL_DATA_SIZE) /* Offset from the beginning of ram */ -#define CFG_INIT_SP_ADDR 0x013fa000 /* Physical start adress of inital stack */ +#define CONFIG_SYS_INIT_RAM_ADDR (CONFIG_SYS_IMMR + 0x003f9800) /* Physical start adress of internal MPC555 writable RAM */ +#define CONFIG_SYS_INIT_RAM_END (CONFIG_SYS_IMMR + 0x003fffff) /* Physical end adress of internal MPC555 used RAM area */ +#define CONFIG_SYS_GBL_DATA_SIZE 64 /* Size in bytes reserved for initial global data */ +#define CONFIG_SYS_GBL_DATA_OFFSET ((CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_INIT_RAM_ADDR) - CONFIG_SYS_GBL_DATA_SIZE) /* Offset from the beginning of ram */ +#define CONFIG_SYS_INIT_SP_ADDR 0x013fa000 /* Physical start adress of inital stack */ /* * Start addresses for the final memory configuration - * Please note that CFG_SDRAM_BASE _must_ start at 0 + * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 */ -#define CFG_SDRAM_BASE 0x00000000 /* Monitor won't change memory map */ -#define CFG_FLASH_BASE 0x02000000 /* External flash */ +#define CONFIG_SYS_SDRAM_BASE 0x00000000 /* Monitor won't change memory map */ +#define CONFIG_SYS_FLASH_BASE 0x02000000 /* External flash */ #define PLD_BASE 0x03000000 /* PLD */ #define ANYBUS_BASE 0x03010000 /* Anybus Module */ -#define CFG_RESET_ADRESS 0x01000000 /* Adress which causes reset */ -#define CFG_MONITOR_BASE CFG_FLASH_BASE /* TEXT_BASE is defined in the board config.mk file. */ +#define CONFIG_SYS_RESET_ADRESS 0x01000000 /* Adress which causes reset */ +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE /* TEXT_BASE is defined in the board config.mk file. */ /* This adress is given to the linker with -Ttext to */ /* locate the text section at this adress. */ -#define CFG_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */ -#define CFG_MALLOC_LEN (64 << 10) /* Reserve 128 kB for malloc() */ +#define CONFIG_SYS_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */ +#define CONFIG_SYS_MALLOC_LEN (64 << 10) /* Reserve 128 kB for malloc() */ /* * For booting Linux, the board info and command line data * have to be in the first 8 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization. */ -#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ +#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ /*----------------------------------------------------------------------- @@ -162,18 +162,18 @@ * */ -#define CFG_MAX_FLASH_BANKS 1 /* Max number of memory banks */ -#define CFG_MAX_FLASH_SECT 64 /* Max number of sectors on one chip */ -#define CFG_FLASH_ERASE_TOUT 180000 /* Timeout for Flash Erase (in ms) */ -#define CFG_FLASH_WRITE_TOUT 600 /* Timeout for Flash Write (in ms) */ -#define CFG_FLASH_PROTECTION 1 /* Physically section protection on */ +#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* Max number of memory banks */ +#define CONFIG_SYS_MAX_FLASH_SECT 64 /* Max number of sectors on one chip */ +#define CONFIG_SYS_FLASH_ERASE_TOUT 180000 /* Timeout for Flash Erase (in ms) */ +#define CONFIG_SYS_FLASH_WRITE_TOUT 600 /* Timeout for Flash Write (in ms) */ +#define CONFIG_SYS_FLASH_PROTECTION 1 /* Physically section protection on */ #define CONFIG_ENV_IS_IN_FLASH 1 #ifdef CONFIG_ENV_IS_IN_FLASH #define CONFIG_ENV_OFFSET 0x00020000 /* Environment starts at this adress */ #define CONFIG_ENV_SIZE 0x00010000 /* Set whole sector as env */ -#define CFG_USE_PPCENV /* Environment embedded in sect .ppcenv */ +#define CONFIG_SYS_USE_PPCENV /* Environment embedded in sect .ppcenv */ #endif /*----------------------------------------------------------------------- @@ -183,10 +183,10 @@ * SW Watchdog freeze */ #if defined(CONFIG_WATCHDOG) -#define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \ +#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \ SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP) #else -#define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \ +#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \ SYPCR_SWP) #endif /* CONFIG_WATCHDOG */ @@ -195,14 +195,14 @@ *----------------------------------------------------------------------- * Clear Reference Interrupt Status, Timebase freezing enabled */ -#define CFG_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF) +#define CONFIG_SYS_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF) /*----------------------------------------------------------------------- * PISCR - Periodic Interrupt Status and Control *----------------------------------------------------------------------- * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled */ -#define CFG_PISCR (PISCR_PITF) +#define CONFIG_SYS_PISCR (PISCR_PITF) /*----------------------------------------------------------------------- * SCCR - System Clock and reset Control Register @@ -211,7 +211,7 @@ * power management and some other internal clocks */ #define SCCR_MASK SCCR_EBDF00 -#define CFG_SCCR (SCCR_TBS | SCCR_RTDIV | SCCR_RTSEL | \ +#define CONFIG_SYS_SCCR (SCCR_TBS | SCCR_RTDIV | SCCR_RTSEL | \ SCCR_COM00 | SCCR_DFNL000 | SCCR_DFNH000) /*----------------------------------------------------------------------- @@ -219,7 +219,7 @@ *----------------------------------------------------------------------- * Data show cycle */ -#define CFG_SIUMCR (SIUMCR_DBGC00) /* Disable data show cycle */ +#define CONFIG_SYS_SIUMCR (SIUMCR_DBGC00) /* Disable data show cycle */ /*----------------------------------------------------------------------- * PLPRCR - PLL, Low-Power, and Reset Control Register @@ -227,8 +227,8 @@ * Set all bits to 40 Mhz * */ -#define CFG_OSC_CLK ((uint)4000000) /* Oscillator clock is 4MHz */ -#define CFG_PLPRCR (PLPRCR_MF_9 | PLPRCR_DIVF_0) +#define CONFIG_SYS_OSC_CLK ((uint)4000000) /* Oscillator clock is 4MHz */ +#define CONFIG_SYS_PLPRCR (PLPRCR_MF_9 | PLPRCR_DIVF_0) /*----------------------------------------------------------------------- @@ -236,36 +236,36 @@ *----------------------------------------------------------------------- * */ -#define CFG_UMCR (UMCR_FSPEED) /* IMB clock same as U-bus */ +#define CONFIG_SYS_UMCR (UMCR_FSPEED) /* IMB clock same as U-bus */ /*----------------------------------------------------------------------- * ICTRL - I-Bus Support Control Register */ -#define CFG_ICTRL (ICTRL_ISCT_SER_7) /* Take out of serialized mode */ +#define CONFIG_SYS_ICTRL (ICTRL_ISCT_SER_7) /* Take out of serialized mode */ /*----------------------------------------------------------------------- * USIU - Memory Controller Register *----------------------------------------------------------------------- */ -#define CFG_BR0_PRELIM (CFG_FLASH_BASE | BR_V | BR_BI | BR_PS_16) -#define CFG_OR0_PRELIM (OR_ADDR_MK_FF | OR_SCY_3) -#define CFG_BR1_PRELIM (ANYBUS_BASE) -#define CFG_OR1_PRELIM (OR_ADDR_MK_FFFF | OR_SCY_1 | OR_ETHR) -#define CFG_BR2_PRELIM (CFG_SDRAM_BASE | BR_V | BR_PS_32) -#define CFG_OR2_PRELIM (OR_ADDR_MK_FF) -#define CFG_BR3_PRELIM (PLD_BASE | BR_V | BR_BI | BR_LBDIR | BR_PS_8) -#define CFG_OR3_PRELIM (OR_ADDR_MK_FF | OR_TRLX | OR_BSCY | OR_SCY_8 | \ +#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE | BR_V | BR_BI | BR_PS_16) +#define CONFIG_SYS_OR0_PRELIM (OR_ADDR_MK_FF | OR_SCY_3) +#define CONFIG_SYS_BR1_PRELIM (ANYBUS_BASE) +#define CONFIG_SYS_OR1_PRELIM (OR_ADDR_MK_FFFF | OR_SCY_1 | OR_ETHR) +#define CONFIG_SYS_BR2_PRELIM (CONFIG_SYS_SDRAM_BASE | BR_V | BR_PS_32) +#define CONFIG_SYS_OR2_PRELIM (OR_ADDR_MK_FF) +#define CONFIG_SYS_BR3_PRELIM (PLD_BASE | BR_V | BR_BI | BR_LBDIR | BR_PS_8) +#define CONFIG_SYS_OR3_PRELIM (OR_ADDR_MK_FF | OR_TRLX | OR_BSCY | OR_SCY_8 | \ OR_ACS_10 | OR_ETHR | OR_CSNT) -#define FLASH_BASE0_PRELIM CFG_FLASH_BASE /* We don't realign the flash */ +#define FLASH_BASE0_PRELIM CONFIG_SYS_FLASH_BASE /* We don't realign the flash */ /*----------------------------------------------------------------------- * DER - Timer Decrementer *----------------------------------------------------------------------- * Initialise to zero */ -#define CFG_DER 0x00000000 +#define CONFIG_SYS_DER 0x00000000 /* |