diff options
Diffstat (limited to 'include/configs/csb226.h')
| -rw-r--r-- | include/configs/csb226.h | 162 |
1 files changed, 81 insertions, 81 deletions
diff --git a/include/configs/csb226.h b/include/configs/csb226.h index 266e0e6533c..a24e34a5089 100644 --- a/include/configs/csb226.h +++ b/include/configs/csb226.h @@ -111,38 +111,38 @@ * used for the RAM copy of the uboot code * */ -#define CFG_MALLOC_LEN (128*1024) -#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ +#define CONFIG_SYS_MALLOC_LEN (128*1024) +#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CFG_LONGHELP /* undef to save memory */ -#define CFG_PROMPT "uboot> " /* Monitor Command Prompt */ -#define CFG_CBSIZE 128 /* Console I/O Buffer Size */ -#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ -#define CFG_MAXARGS 16 /* max number of command args */ -#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_PROMPT "uboot> " /* Monitor Command Prompt */ +#define CONFIG_SYS_CBSIZE 128 /* Console I/O Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CFG_MEMTEST_START 0xa0400000 /* memtest works on */ -#define CFG_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */ +#define CONFIG_SYS_MEMTEST_START 0xa0400000 /* memtest works on */ +#define CONFIG_SYS_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */ -#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ +#undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, in Hz */ -#define CFG_LOAD_ADDR 0xa3000000 /* default load address */ +#define CONFIG_SYS_LOAD_ADDR 0xa3000000 /* default load address */ /* RS: where is this documented? */ /* RS: is this where U-Boot is */ /* RS: relocated to in RAM? */ -#define CFG_HZ 3686400 /* incrementer freq: 3.6864 MHz */ +#define CONFIG_SYS_HZ 3686400 /* incrementer freq: 3.6864 MHz */ /* RS: the oscillator is actually 3680130?? */ -#define CFG_CPUSPEED 0x141 /* set core clock to 200/200/100 MHz */ +#define CONFIG_SYS_CPUSPEED 0x141 /* set core clock to 200/200/100 MHz */ /* 0101000001 */ /* ^^^^^ Memory Speed 99.53 MHz */ /* ^^ Run Mode Speed = 2x Mem Speed */ /* ^^ Turbo Mode Sp. = 1x Run M. Sp. */ -#define CFG_MONITOR_LEN 0x20000 /* 128 KiB */ +#define CONFIG_SYS_MONITOR_LEN 0x20000 /* 128 KiB */ /* valid baudrates */ -#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } /* * Network chip @@ -172,10 +172,10 @@ #define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ #define PHYS_FLASH_SIZE 0x02000000 /* 32 MB */ -#define CFG_DRAM_BASE 0xa0000000 /* RAM starts here */ -#define CFG_DRAM_SIZE 0x02000000 +#define CONFIG_SYS_DRAM_BASE 0xa0000000 /* RAM starts here */ +#define CONFIG_SYS_DRAM_SIZE 0x02000000 -#define CFG_FLASH_BASE PHYS_FLASH_1 +#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 # if 0 /* FIXME: switch to _documented_ registers */ @@ -196,9 +196,9 @@ * GP79 == nCS3 is 1 * GP80 == nCS4 is 1 */ -#define CFG_GPSR0_VAL 0x03008000 -#define CFG_GPSR1_VAL 0xC0028282 -#define CFG_GPSR2_VAL 0x0001C000 +#define CONFIG_SYS_GPSR0_VAL 0x03008000 +#define CONFIG_SYS_GPSR1_VAL 0xC0028282 +#define CONFIG_SYS_GPSR2_VAL 0x0001C000 /* GP02 == DON_RST is 0 * GP23 == SCLK is 0 @@ -207,9 +207,9 @@ * GP61 == LED_A is 0 * GP73 == SWUPD_LED is 0 */ -#define CFG_GPCR0_VAL 0x00800004 -#define CFG_GPCR1_VAL 0x30002000 -#define CFG_GPCR2_VAL 0x00000100 +#define CONFIG_SYS_GPCR0_VAL 0x00800004 +#define CONFIG_SYS_GPCR1_VAL 0x30002000 +#define CONFIG_SYS_GPCR2_VAL 0x00000100 /* GP00 == DON_READY is input * GP01 == DON_OK is input @@ -254,9 +254,9 @@ * GP79 == nCS3 is output * GP80 == nCS4 is output */ -#define CFG_GPDR0_VAL 0x03808004 -#define CFG_GPDR1_VAL 0xF002A282 -#define CFG_GPDR2_VAL 0x0001C200 +#define CONFIG_SYS_GPDR0_VAL 0x03808004 +#define CONFIG_SYS_GPDR1_VAL 0xF002A282 +#define CONFIG_SYS_GPDR2_VAL 0x0001C200 /* GP15 == nCS1 is AF10 * GP18 == RDY is AF01 @@ -276,12 +276,12 @@ * GP79 == nCS3 is AF10 * GP80 == nCS4 is AF10 */ -#define CFG_GAFR0_L_VAL 0x80000000 -#define CFG_GAFR0_U_VAL 0x001A8010 -#define CFG_GAFR1_L_VAL 0x60088058 -#define CFG_GAFR1_U_VAL 0x00000008 -#define CFG_GAFR2_L_VAL 0xA0000000 -#define CFG_GAFR2_U_VAL 0x00000002 +#define CONFIG_SYS_GAFR0_L_VAL 0x80000000 +#define CONFIG_SYS_GAFR0_U_VAL 0x001A8010 +#define CONFIG_SYS_GAFR1_L_VAL 0x60088058 +#define CONFIG_SYS_GAFR1_U_VAL 0x00000008 +#define CONFIG_SYS_GAFR2_L_VAL 0xA0000000 +#define CONFIG_SYS_GAFR2_U_VAL 0x00000002 /* FIXME: set GPIO_RER/FER */ @@ -292,7 +292,7 @@ * BFS = 1 * SSS = 1 */ -#define CFG_PSSR_VAL 0x37 +#define CONFIG_SYS_PSSR_VAL 0x37 /* * Memory settings @@ -313,7 +313,7 @@ * [03] 1 - 16 Bit bus width * [02:00] 000 - nonburst RAM or FLASH */ -#define CFG_MSC0_VAL 0x25b825b8 /* flash banks */ +#define CONFIG_SYS_MSC0_VAL 0x25b825b8 /* flash banks */ /* This is the configuration for nCS2/3 -> TDM-Switch, DSP * configuration for nCS3: DSP @@ -331,7 +331,7 @@ * [03] 1 - 16 Bit bus width * [02:00] 100 - variable latency I/O */ -#define CFG_MSC1_VAL 0x123C593C /* TDM switch, DSP */ +#define CONFIG_SYS_MSC1_VAL 0x123C593C /* TDM switch, DSP */ /* This is the configuration for nCS4/5 -> ExtBus, LAN Controller * @@ -350,7 +350,7 @@ * [03] 1 - 16 Bit bus width * [02:00] 100 - variable latency I/O */ -#define CFG_MSC2_VAL 0x123C6CDC /* extra bus, LAN controller */ +#define CONFIG_SYS_MSC2_VAL 0x123C6CDC /* extra bus, LAN controller */ /* MDCNFG: SDRAM Configuration Register * @@ -378,7 +378,7 @@ * [00] 1 - enable SDRAM partition 0 */ /* use the configuration above but disable partition 0 */ -#define CFG_MDCNFG_VAL 0x000019c8 +#define CONFIG_SYS_MDCNFG_VAL 0x000019c8 /* MDREFR: SDRAM Refresh Control Register * @@ -399,7 +399,7 @@ * [12] 1 - E0PIN: disable SDCKE0 * [11:00] 000000011000 - (64ms/8192)*MemClkFreq/32 = 24 */ -#define CFG_MDREFR_VAL 0x0081D018 +#define CONFIG_SYS_MDREFR_VAL 0x0081D018 /* MDMRS: Mode Register Set Configuration Register * @@ -414,64 +414,64 @@ * [03] 0 - MDADD0: SDRAM0/1 burst Type. Fixed to sequential. * [02:00] 010 - MDBL0: SDRAM0/1 burst Length. Fixed to 4. */ -#define CFG_MDMRS_VAL 0x00020022 +#define CONFIG_SYS_MDMRS_VAL 0x00020022 /* * PCMCIA and CF Interfaces */ -#define CFG_MECR_VAL 0x00000000 -#define CFG_MCMEM0_VAL 0x00000000 -#define CFG_MCMEM1_VAL 0x00000000 -#define CFG_MCATT0_VAL 0x00000000 -#define CFG_MCATT1_VAL 0x00000000 -#define CFG_MCIO0_VAL 0x00000000 -#define CFG_MCIO1_VAL 0x00000000 +#define CONFIG_SYS_MECR_VAL 0x00000000 +#define CONFIG_SYS_MCMEM0_VAL 0x00000000 +#define CONFIG_SYS_MCMEM1_VAL 0x00000000 +#define CONFIG_SYS_MCATT0_VAL 0x00000000 +#define CONFIG_SYS_MCATT1_VAL 0x00000000 +#define CONFIG_SYS_MCIO0_VAL 0x00000000 +#define CONFIG_SYS_MCIO1_VAL 0x00000000 #endif /* * GPIO settings */ -#define CFG_GPSR0_VAL 0xFFFFFFFF -#define CFG_GPSR1_VAL 0xFFFFFFFF -#define CFG_GPSR2_VAL 0xFFFFFFFF -#define CFG_GPCR0_VAL 0x08022080 -#define CFG_GPCR1_VAL 0x00000000 -#define CFG_GPCR2_VAL 0x00000000 -#define CFG_GPDR0_VAL 0xCD82A878 -#define CFG_GPDR1_VAL 0xFCFFAB80 -#define CFG_GPDR2_VAL 0x0001FFFF -#define CFG_GAFR0_L_VAL 0x80000000 -#define CFG_GAFR0_U_VAL 0xA5254010 -#define CFG_GAFR1_L_VAL 0x599A9550 -#define CFG_GAFR1_U_VAL 0xAAA5AAAA -#define CFG_GAFR2_L_VAL 0xAAAAAAAA -#define CFG_GAFR2_U_VAL 0x00000002 +#define CONFIG_SYS_GPSR0_VAL 0xFFFFFFFF +#define CONFIG_SYS_GPSR1_VAL 0xFFFFFFFF +#define CONFIG_SYS_GPSR2_VAL 0xFFFFFFFF +#define CONFIG_SYS_GPCR0_VAL 0x08022080 +#define CONFIG_SYS_GPCR1_VAL 0x00000000 +#define CONFIG_SYS_GPCR2_VAL 0x00000000 +#define CONFIG_SYS_GPDR0_VAL 0xCD82A878 +#define CONFIG_SYS_GPDR1_VAL 0xFCFFAB80 +#define CONFIG_SYS_GPDR2_VAL 0x0001FFFF +#define CONFIG_SYS_GAFR0_L_VAL 0x80000000 +#define CONFIG_SYS_GAFR0_U_VAL 0xA5254010 +#define CONFIG_SYS_GAFR1_L_VAL 0x599A9550 +#define CONFIG_SYS_GAFR1_U_VAL 0xAAA5AAAA +#define CONFIG_SYS_GAFR2_L_VAL 0xAAAAAAAA +#define CONFIG_SYS_GAFR2_U_VAL 0x00000002 /* FIXME: set GPIO_RER/FER */ -#define CFG_PSSR_VAL 0x20 +#define CONFIG_SYS_PSSR_VAL 0x20 /* * Memory settings */ -#define CFG_MSC0_VAL 0x2ef15af0 -#define CFG_MSC1_VAL 0x00003ff4 -#define CFG_MSC2_VAL 0x7ff07ff0 -#define CFG_MDCNFG_VAL 0x09a909a9 -#define CFG_MDREFR_VAL 0x038ff030 -#define CFG_MDMRS_VAL 0x00220022 +#define CONFIG_SYS_MSC0_VAL 0x2ef15af0 +#define CONFIG_SYS_MSC1_VAL 0x00003ff4 +#define CONFIG_SYS_MSC2_VAL 0x7ff07ff0 +#define CONFIG_SYS_MDCNFG_VAL 0x09a909a9 +#define CONFIG_SYS_MDREFR_VAL 0x038ff030 +#define CONFIG_SYS_MDMRS_VAL 0x00220022 /* * PCMCIA and CF Interfaces */ -#define CFG_MECR_VAL 0x00000000 -#define CFG_MCMEM0_VAL 0x00000000 -#define CFG_MCMEM1_VAL 0x00000000 -#define CFG_MCATT0_VAL 0x00000000 -#define CFG_MCATT1_VAL 0x00000000 -#define CFG_MCIO0_VAL 0x00000000 -#define CFG_MCIO1_VAL 0x00000000 +#define CONFIG_SYS_MECR_VAL 0x00000000 +#define CONFIG_SYS_MCMEM0_VAL 0x00000000 +#define CONFIG_SYS_MCMEM1_VAL 0x00000000 +#define CONFIG_SYS_MCATT0_VAL 0x00000000 +#define CONFIG_SYS_MCATT1_VAL 0x00000000 +#define CONFIG_SYS_MCIO0_VAL 0x00000000 +#define CONFIG_SYS_MCIO1_VAL 0x00000000 #define CSB226_USER_LED0 0x00000008 #define CSB226_USER_LED1 0x00000010 @@ -481,12 +481,12 @@ /* * FLASH and environment organization */ -#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CFG_MAX_FLASH_SECT 128 /* max number of sect. on one chip */ +#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max number of sect. on one chip */ /* timeout values are in ticks */ -#define CFG_FLASH_ERASE_TOUT (2*CFG_HZ) /* Timeout for Flash Erase */ -#define CFG_FLASH_WRITE_TOUT (2*CFG_HZ) /* Timeout for Flash Write */ +#define CONFIG_SYS_FLASH_ERASE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Erase */ +#define CONFIG_SYS_FLASH_WRITE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Write */ #define CONFIG_ENV_IS_IN_FLASH 1 #define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0x1C000) |