diff options
Diffstat (limited to 'include/configs/etamin.h')
| -rw-r--r-- | include/configs/etamin.h | 257 |
1 files changed, 257 insertions, 0 deletions
diff --git a/include/configs/etamin.h b/include/configs/etamin.h new file mode 100644 index 00000000000..4919cfe3536 --- /dev/null +++ b/include/configs/etamin.h @@ -0,0 +1,257 @@ +/* + * (C) Copyright 2013 Siemens Schweiz AG + * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de. + * + * Based on: + * U-Boot file:/include/configs/am335x_evm.h + * + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_ETAMIN_H +#define __CONFIG_ETAMIN_H + +#include "siemens-am33x-common.h" +/* NAND specific changes for etamin due to different page size */ +#undef CONFIG_SYS_NAND_PAGE_SIZE +#undef CONFIG_SYS_NAND_OOBSIZE +#undef CONFIG_SYS_NAND_BLOCK_SIZE +#undef CONFIG_SYS_NAND_ECCPOS +#undef CONFIG_SYS_NAND_U_BOOT_OFFS +#undef CONFIG_SYS_ENV_SECT_SIZE +#undef CONFIG_ENV_OFFSET +#undef CONFIG_NAND_OMAP_ECCSCHEME +#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH16_CODE_HW + +#define CONFIG_ENV_OFFSET 0x980000 +#define CONFIG_SYS_ENV_SECT_SIZE (512 << 10) /* 512 KiB */ +#define CONFIG_SYS_NAND_PAGE_SIZE 4096 +#define CONFIG_SYS_NAND_OOBSIZE 224 +#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * CONFIG_SYS_NAND_PAGE_SIZE) +#define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \ + 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, \ + 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, \ + 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, \ + 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, \ + 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, \ + 60, 61, 62, 63, 64, 65, 66, 67, 68, 69, \ + 70, 71, 72, 73, 74, 75, 76, 77, 78, 79, \ + 80, 81, 82, 83, 84, 85, 86, 87, 88, 89, \ + 90, 91, 92, 93, 94, 95, 96, 97, 98, 99, \ + 100, 101, 102, 103, 104, 105, 106, 107, 108, 109, \ + 110, 111, 112, 113, 114, 115, 116, 117, 118, 119, \ + 120, 121, 122, 123, 124, 125, 126, 127, 128, 129, \ + 130, 131, 132, 133, 134, 135, 136, 137, 138, 139, \ + 140, 141, 142, 143, 144, 145, 146, 147, 148, 149, \ + 150, 151, 152, 153, 154, 155, 156, 157, 158, 159, \ + 160, 161, 162, 163, 164, 165, 166, 167, 168, 169, \ + 170, 171, 172, 173, 174, 175, 176, 177, 178, 179, \ + 180, 181, 182, 183, 184, 185, 186, 187, 188, 189, \ + 190, 191, 192, 193, 194, 195, 196, 197, 198, 199, \ + 200, 201, 202, 203, 204, 205, 206, 207, 208, 209, \ + } + +#undef CONFIG_SYS_NAND_ECCSIZE +#undef CONFIG_SYS_NAND_ECCBYTES +#define CONFIG_SYS_NAND_ECCSIZE 512 +#define CONFIG_SYS_NAND_ECCBYTES 26 + +#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x200000 + +#define CONFIG_SYS_NAND_MAX_CHIPS 1 + +#undef CONFIG_SYS_MAX_NAND_DEVICE +#define CONFIG_SYS_MAX_NAND_DEVICE 3 +#define CONFIG_SYS_NAND_BASE2 (0x18000000) /* physical address */ +#define CONFIG_SYS_NAND_BASE_LIST {CONFIG_SYS_NAND_BASE, \ + CONFIG_SYS_NAND_BASE2} + +#define CONFIG_SYS_NAND_ONFI_DETECTION +#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_SYS_MPUCLK 300 +#define DDR_PLL_FREQ 303 +#undef CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC + +/* FWD Button = 27 + * SRV Button = 87 */ +#define BOARD_DFU_BUTTON_GPIO 27 +#define GPIO_LAN9303_NRST 88 /* GPIO2_24 = gpio88 */ +/* In dfu mode keep led1 on */ +#define CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \ + "button_dfu0=27\0" \ + "button_dfu1=87\0" \ + "led0=3,0,1\0" \ + "led1=4,0,0\0" \ + "led2=5,0,1\0" \ + "led3=87,0,1\0" \ + "led4=60,0,1\0" \ + "led5=63,0,1\0" + +#undef CONFIG_DOS_PARTITION +#undef CONFIG_CMD_FAT + +#define CONFIG_BOARD_LATE_INIT + +/* Physical Memory Map */ +#define CONFIG_MAX_RAM_BANK_SIZE (1024 << 20) /* 1GB */ + +/* I2C Configuration */ +#define CONFIG_SYS_I2C_SPEED 100000 + +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 +#define EEPROM_ADDR_DDR3 0x90 +#define EEPROM_ADDR_CHIP 0x120 + +#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x300 + +#undef CONFIG_SPL_NET_SUPPORT +#undef CONFIG_SPL_NET_VCI_STRING +#undef CONFIG_SPL_ETH_SUPPORT + +#undef CONFIG_MII +#undef CONFIG_PHY_GIGE +#define CONFIG_PHY_SMSC + +#define CONFIG_FACTORYSET + +/* use both define to compile a SPL compliance test */ +/* +#define CONFIG_SPL_CMT +#define CONFIG_SPL_CMT_DEBUG +*/ + +/* nedded by compliance test in read mode */ +#if defined(CONFIG_SPL_CMT) +#define CONFIG_SYS_DCACHE_OFF +#endif + +/* Watchdog */ +#define CONFIG_OMAP_WATCHDOG + +/* Define own nand partitions */ +#define CONFIG_ENV_OFFSET_REDUND 0xB80000 +#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE +#define CONFIG_ENV_RANGE (4 * CONFIG_SYS_ENV_SECT_SIZE) + + + +#define CONFIG_DFU_MTD +#undef COMMON_ENV_DFU_ARGS +#define COMMON_ENV_DFU_ARGS "dfu_args=run bootargs_defaults;" \ + "setenv bootargs ${bootargs};" \ + "mtdparts default;" \ + "draco_led 1;" \ + "dfu 0 mtd 0;" \ + "draco_led 0;\0" \ + +#undef DFU_ALT_INFO_NAND_V2 +#define DFU_ALT_INFO_NAND_V2 \ + "spl mtddev;" \ + "spl.backup1 mtddev;" \ + "spl.backup2 mtddev;" \ + "spl.backup3 mtddev;" \ + "u-boot mtddev;" \ + "u-boot.env0 mtddev;" \ + "u-boot.env1 mtddev;" \ + "rootfs mtddevubi" \ + +#undef MTDIDS_NAME_STR +#define MTDIDS_NAME_STR "omap2-nand_concat" +#undef MTDIDS_DEFAULT +#define MTDIDS_DEFAULT "nand2=" MTDIDS_NAME_STR + +#undef MTDPARTS_DEFAULT_V2 +#define MTDPARTS_DEFAULT_V2 "mtdparts=" MTDIDS_NAME_STR ":" \ + "512k(spl)," \ + "512k(spl.backup1)," \ + "512k(spl.backup2)," \ + "512k(spl.backup3)," \ + "7680k(u-boot)," \ + "2048k(u-boot.env0)," \ + "2048k(u-boot.env1)," \ + "2048k(mtdoops)," \ + "-(rootfs)" + +#undef MTDPARTS_DEFAULT +#define MTDPARTS_DEFAULT MTDPARTS_DEFAULT_V2 + +#undef CONFIG_ENV_SETTINGS_NAND_V2 +#define CONFIG_ENV_SETTINGS_NAND_V2 \ + "nand_active_ubi_vol=rootfs_a\0" \ + "rootfs_name=rootfs\0" \ + "kernel_name=uImage\0"\ + "nand_root_fs_type=ubifs rootwait=1\0" \ + "nand_args=run bootargs_defaults;" \ + "mtdparts default;" \ + "setenv ${partitionset_active} true;" \ + "if test -n ${A}; then " \ + "setenv nand_active_ubi_vol ${rootfs_name}_a;" \ + "fi;" \ + "if test -n ${B}; then " \ + "setenv nand_active_ubi_vol ${rootfs_name}_b;" \ + "fi;" \ + "setenv nand_root ubi0:${nand_active_ubi_vol} rw " \ + "ubi.mtd=rootfs,${ubi_off};" \ + "setenv bootargs ${bootargs} " \ + "root=${nand_root} noinitrd ${mtdparts} " \ + "rootfstype=${nand_root_fs_type} ip=${ip_method} " \ + "console=ttyMTD,mtdoops console=ttyO0,115200n8 mtdoops.mtddev" \ + "=mtdoops\0" \ + COMMON_ENV_DFU_ARGS \ + "dfu_alt_info=" DFU_ALT_INFO_NAND_V2 "\0" \ + COMMON_ENV_NAND_BOOT \ + "ubi part rootfs ${ubi_off};" \ + "ubifsmount ubi0:${nand_active_ubi_vol};" \ + "ubifsload ${kloadaddr} boot/${kernel_name};" \ + "ubifsload ${loadaddr} boot/${dtb_name}.dtb;" \ + "bootm ${kloadaddr} - ${loadaddr}\0" \ + "nand_boot_backup=ubifsload ${loadaddr} boot/am335x-draco.dtb;" \ + "bootm ${kloadaddr} - ${loadaddr}\0" \ + COMMON_ENV_NAND_CMDS + +#ifndef CONFIG_SPL_BUILD + +#define CONFIG_NAND_CS_INIT +#define ETAMIN_NAND_GPMC_CONFIG1 0x00000800 +#define ETAMIN_NAND_GPMC_CONFIG2 0x001e1e00 +#define ETAMIN_NAND_GPMC_CONFIG3 0x001e1e00 +#define ETAMIN_NAND_GPMC_CONFIG4 0x16051807 +#define ETAMIN_NAND_GPMC_CONFIG5 0x00151e1e +#define ETAMIN_NAND_GPMC_CONFIG6 0x16000f80 +#define CONFIG_MTD_CONCAT + +/* Default env settings */ +#define CONFIG_EXTRA_ENV_SETTINGS \ + "hostname=etamin\0" \ + "ubi_off=4096\0"\ + "nand_img_size=0x400000\0" \ + "optargs=\0" \ + "preboot=draco_led 0\0" \ + CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \ + CONFIG_ENV_SETTINGS_V2 \ + CONFIG_ENV_SETTINGS_NAND_V2 + +#ifndef CONFIG_RESTORE_FLASH + +#define CONFIG_BOOTCOMMAND \ +"if dfubutton; then " \ + "run dfu_start; " \ + "reset; " \ +"fi;" \ +"run nand_boot;" \ +"run nand_boot_backup;" \ +"reset;" + + +#else +#define CONFIG_BOOTCOMMAND \ + "setenv autoload no; " \ + "dhcp; " \ + "if tftp 80000000 debrick.scr; then " \ + "source 80000000; " \ + "fi" +#endif +#endif /* CONFIG_SPL_BUILD */ +#endif /* ! __CONFIG_ETAMIN_H */ |