diff options
Diffstat (limited to 'include/configs/m501sk.h')
| -rw-r--r-- | include/configs/m501sk.h | 72 |
1 files changed, 36 insertions, 36 deletions
diff --git a/include/configs/m501sk.h b/include/configs/m501sk.h index 32403f7de6e..f09214dce9c 100644 --- a/include/configs/m501sk.h +++ b/include/configs/m501sk.h @@ -45,31 +45,31 @@ /* * Size of malloc() pool */ -#define CFG_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) -#define CFG_GBL_DATA_SIZE 128 /* Bytes reserved for initial data */ +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) +#define CONFIG_SYS_GBL_DATA_SIZE 128 /* Bytes reserved for initial data */ #define CONFIG_BAUDRATE 115200 /* Hardcode so no __divsi3 : AT91C_MASTER_CLOCK / baudrate / 16 */ -#define CFG_AT91C_BRGR_DIVISOR 33 +#define CONFIG_SYS_AT91C_BRGR_DIVISOR 33 /* * Hardware drivers */ -#define CFG_FLASH_CFI 1 +#define CONFIG_SYS_FLASH_CFI 1 #define CONFIG_FLASH_CFI_DRIVER 1 #define CONFIG_ENV_SECT_SIZE 0x20000 -#define CFG_FLASH_USE_BUFFER_WRITE -#define CFG_FLASH_PROTECTION /*for Intel P30 Flash*/ +#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE +#define CONFIG_SYS_FLASH_PROTECTION /*for Intel P30 Flash*/ #define CONFIG_HARD_I2C -#define CFG_I2C_SPEED 100 -#define CFG_I2C_SLAVE 0 -#define CFG_CONSOLE_INFO_QUIET +#define CONFIG_SYS_I2C_SPEED 100 +#define CONFIG_SYS_I2C_SLAVE 0 +#define CONFIG_SYS_CONSOLE_INFO_QUIET #undef CONFIG_ENV_IS_IN_EEPROM -#define CFG_I2C_EEPROM_ADDR 0x50 -#define CFG_I2C_EEPROM_ADDR_LEN 1 -#define CFG_EEPROM_AT24C16 -#define CFG_I2C_RTC_ADDR 0x32 +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 +#define CONFIG_SYS_EEPROM_AT24C16 +#define CONFIG_SYS_I2C_RTC_ADDR 0x32 #undef CONFIG_RTC_DS1338 #define CONFIG_RTC_RS5C372A #undef CONFIG_POST @@ -123,11 +123,11 @@ #define CONFIG_CMD_FLASH #define CONFIG_CMD_ENV -#define CFG_HUSH_PARSER +#define CONFIG_SYS_HUSH_PARSER #define CONFIG_AUTO_COMPLETE -#define CFG_PROMPT_HUSH_PS2 ">>" +#define CONFIG_SYS_PROMPT_HUSH_PS2 ">>" -#define CFG_MAX_NAND_DEVICE 0 /* Max number of NAND devices */ +#define CONFIG_SYS_MAX_NAND_DEVICE 0 /* Max number of NAND devices */ #define SECTORSIZE 512 #define ADDR_COLUMN 1 @@ -138,9 +138,9 @@ #define PHYS_SDRAM 0x20000000 #define PHYS_SDRAM_SIZE 0x2000000 /* 32 megs */ -#define CFG_MEMTEST_START 0x21000000 /* PHYS_SDRAM */ -/* CFG_MEMTEST_START + PHYS_SDRAM_SIZE - 262144 */ -#define CFG_MEMTEST_END 0x00100000 +#define CONFIG_SYS_MEMTEST_START 0x21000000 /* PHYS_SDRAM */ +/* CONFIG_SYS_MEMTEST_START + PHYS_SDRAM_SIZE - 262144 */ +#define CONFIG_SYS_MEMTEST_END 0x00100000 #define CONFIG_DRIVER_ETHER #define CONFIG_NET_RETRY_COUNT 20 @@ -148,15 +148,15 @@ #define PHYS_FLASH_1 0x10000000 #define PHYS_FLASH_SIZE 0x800000 /* 8 megs main flash */ -#define CFG_FLASH_BASE PHYS_FLASH_1 -#define CFG_MAX_FLASH_BANKS 1 -#define CFG_MAX_FLASH_SECT 256 -#define CFG_FLASH_ERASE_TOUT (2*CFG_HZ) /* Timeout for Flash Erase */ -#define CFG_FLASH_WRITE_TOUT (2*CFG_HZ) /* Timeout for Flash Write */ +#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 +#define CONFIG_SYS_MAX_FLASH_BANKS 1 +#define CONFIG_SYS_MAX_FLASH_SECT 256 +#define CONFIG_SYS_FLASH_ERASE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Erase */ +#define CONFIG_SYS_FLASH_WRITE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Write */ #ifdef CONFIG_ENV_IS_IN_DATAFLASH #define CONFIG_ENV_OFFSET 0x20000 -#define CONFIG_ENV_ADDR (CFG_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET) +#define CONFIG_ENV_ADDR (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET) #define CONFIG_ENV_SIZE 0x2000 #else #define CONFIG_ENV_IS_IN_FLASH @@ -169,23 +169,23 @@ #define CONFIG_ENV_SIZE 1024 #endif -#define CFG_LOAD_ADDR 0x21000000 /* default load address */ +#define CONFIG_SYS_LOAD_ADDR 0x21000000 /* default load address */ /* use for protect flash sectors */ -#define CFG_BOOT_SIZE 0x6000 /* 24 KBytes */ -#define CFG_U_BOOT_BASE (PHYS_FLASH_1 + 0x10000) -#define CFG_U_BOOT_SIZE 0x10000 /* 64 KBytes */ +#define CONFIG_SYS_BOOT_SIZE 0x6000 /* 24 KBytes */ +#define CONFIG_SYS_U_BOOT_BASE (PHYS_FLASH_1 + 0x10000) +#define CONFIG_SYS_U_BOOT_SIZE 0x10000 /* 64 KBytes */ -#define CFG_BAUDRATE_TABLE { 115200 , 19200, 38400, 57600, 9600 } +#define CONFIG_SYS_BAUDRATE_TABLE { 115200 , 19200, 38400, 57600, 9600 } -#define CFG_PROMPT "U-Boot> " /* Monitor Command Prompt */ -#define CFG_CBSIZE 512 /* Console I/O Buffer Size */ -#define CFG_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_PROMPT "U-Boot> " /* Monitor Command Prompt */ +#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ /* Print Buffer Size */ -#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) -#define CFG_HZ 1000 -#define CFG_HZ_CLOCK AT91C_MASTER_CLOCK/2 +#define CONFIG_SYS_HZ 1000 +#define CONFIG_SYS_HZ_CLOCK AT91C_MASTER_CLOCK/2 #define CONFIG_STACKSIZE (32*1024) /* regular stack */ |